Sony KDL-40ZX1 Instrukcja obsługi

GB

PL

KDL-40ZX1

LCD Digital Colour TV

Operating Instructions

Instrukcja obsługi

2

GB

Introduction

Thank you for choosing this Sony product.

Before operating the TV, please read this manual thoroughly and

retain it for future reference.

Notice for Digital TV function

s Any functions related to Digital TV ( ) will only work in

countries or areas where DVB-T (MPEG-2 and H.264/MPEG-4

AVC) digital terrestrial signals are broadcast or where you have

access to a compatible DVB-C (MPEG-2 and H.264/MPEG-4

AVC) cable service. Please confirm with your local dealer if

you can receive a DVB-T signal where you live or ask your

cable provider if their DVB-C cable service is suitable for

integrated operation with this TV.

s The cable provider may charge an additional fee for such a

service and you may be required to agree to their terms and

conditions of business.

s Although this TV set follows DVB-T and DVB-C

specifications, compatibility with future DVB-T digital

terrestrial and DVB-C digital cable broadcasts cannot be

guaranteed.

s Some Digital TV functions may not be available in some

countries/regions and DVB-C cable may not operate correctly

with all providers.

s For more information about DVB-C functionality please see

our cable support site:

http://support.sony-europe.com/TV/DVBC/

Notice for Wireless Signal

1. Hereby, Sony, declares that this unit is in compliance with the

essential requirements and other relevant provisions of Directive

1999/5/EC.

To obtain the declaration of conformity (DoC) for R&TTE

Directive, please access the following URL address.

http://www.compliance.sony.de/

2. TV wireless system can only be used in the following countries:

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,

Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg,

Malta, The Netherlands, Norway, Poland, Portugal, Slovak

Republic, Romania, Slovenia, Spain, Sweden, Switzerland, Turkey,

and The United Kingdom.

When using the TV wireless system, channels 36 to 48 (5.15-

5.25GHz) are selectable for indoor use only.

TV Wireless System - Regulation

Information

For Customers in Italy

s with respect to private use, by the Legislative Decree of

1.8.2003, no. 259 (“Code of Electronic Communications”). In

particular Article 104 indicates when the prior obtainment of a

general authorization is required and Art. 105 indicates when

free use is permitted;

s with respect to the supply to the public of the RLAN access to

telecom networks and services (e.g. TV wireless system), by the

Ministerial Decree 28.5.2003, as amended, and Art. 25 (general

authorization for electronic communications networks and

services) of the Code of electronic communications

s with respect to private use, by the Ministerial Decree

12.07.2007

For Customers in Norway

Use of this radio equipment is not allowed in the geographical area

within a radius of 20 km from the centre of Ny-Ålesund, Svalbard.

For Customers in Cyprus

The end user must register the TV Wireless system in the

Department of Electronic Communications (P.I. 6/2006 and P.I.

6A/2006). P.I. 6/2006 is the Radiocommunications (Categories of

Stations Subject to General Authorization and Registration) Order

of 2006. P.I. 6A/2006 is the General Authorization for the use of

Radiofrequencies by Radio Local area Networks and by Wireless

Access Systems, including Radio Local Area Networks (WAS/

RLAN).

Trademark information

s is a registered trademark of the DVB Project

s Manufactured under license from Dolby Laboratories. Dolby

and the double-D symbol are trademarks of Dolby Laboratories.

s HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

s “BRAVIA” and are trademarks of Sony

Corporation.

s “XMB” and “xross media bar” are the trademarks of Sony

Corporation and Sony Computer Entertainment Inc.

Notice for Identification Label

Labels for Model No. and Power Supply rating (in accordance with

applicable safety regulation) are in the following locations:

Monitor: at the inside of the terminal cover

Media receiver: on the underside

INDEPENDENT JPEG GROUP

SOFTWARE

The module, libjpeg is the work of the Independent JPEG Group.

The manufacturer of this product is Sony Corporation, 1-7-1

Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized

Representative for EMC and product safety is Sony

Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters please refer to

the addresses given in separate service or guarantee

documents.

3

GB

Table of Contents

Start-up Guide 4

Safety Information.......................................................................................................................... 15

Precautions..................................................................................................................................... 17

Remote and Unit Controls/Indicators ........................................................................................... 18

Watching TV

Watching TV.................................................................................................................................... 23

Using the Digital Electronic Programme Guide (EPG) ..................................................... 25

Using the Digital Favourite list ........................................................................................... 26

Using Optional Equipment

Connecting Chart ........................................................................................................................... 27

Viewing Pictures from Connected Equipment............................................................................. 29

Using USB Photo Viewer ............................................................................................................... 30

Using BRAVIA Sync with Control for HDMI ................................................................................. 31

Using MENU Functions

Navigating through Media Receiver Home Menu (XMB™) ......................................................... 32

Settings ........................................................................................................................................... 33

Navigating through Monitor Home Menu ..................................................................................... 41

Additional Information

Specifications ................................................................................................................................. 47

Troubleshooting ............................................................................................................................. 50

: for digital channels only

Before operating the TV, please read the “Safety information” section of this manual.

Retain this manual for future reference.

GB

4

GB

Start-up Guide

1: Checking the unit and

accessories

Monitor (1)

Media receiver (1)

Mains lead for monitor (1)

Mains lead for mains adaptor (1)

Mains adaptor for media receiver (1)

Remote RMF-ED001 (1)

Size AA batteries (R6 type) (2)

IR Blaster (Y-cable) (2)

Stand for media receiver (1)

Terminal cover (1)

Spacers (black) (4)

2: Installing the TV

The following steps must be performed to

correspond with the installation steps in the

instruction manual of the optional accessories.

Follow the instructions in this manual

referring to the instruction manual supplied

with the accessories. For explanations referred

to in ( ) in the installation steps, see the same

steps in the instruction manual supplied with

the accessories.

Installing on a TV stand

Prepare the following item;

– SS-TBL700 Speaker System (not supplied)

~

• Before performing the following instructions, first

you must prepare the SS-TBL700 Speaker System

(Table-Top Stand). Attach the Base Plate to the

Table-Top Stand as shown in the instruction

manual of the SS-TBL700 Speaker System.

• Do not remove the blue tape that secures the plate

on the rear of the monitor, until you finish

installing the Table-Top Stand.

1 Remove the stand cover.

2 Gently slide the monitor onto the neck of

the Table-Top Stand by aligning the F

mark of the plate to the top part of the

Table-Top Stand. Be sure to work with

two or more people.

Stand

cover

5

GB

Start-up Guide

3 Attach the monitor to the Table-Top Stand

using the screws (supplied with SS-

TBL700). Attach the two bottom screws

first, then the top two screws.

~

• If an electric screwdriver is used, set the

torque to tighten at approximately 1.5 N·m

{15 kgf·cm}.

• Do not put stress on the LCD panel or the

frame around the screen.

• Hold the Table-Top Stand firmly with both

hands.

4 Connect the mains lead (supplied) to the

AC IN socket.

~

• Insert the plug fully into the socket.

• When using with an HDMI equipment, also

connect the HDMI cable to the HDMI IN

socket (page 27).

F mark

Top part

Top screws

Bottom screws

(Continued)

6

GB

5 Attach the stand cover.

Hang the stand cover over the top of the

Table-Top Stand’s centre post, and then

push down to close until it clicks.

~

• Be sure not to pinch the mains lead when

attaching the cover.

6 Attach the terminal cover.

7 Connect the TV to your mains socket.

Installing on a wall

Prepare the following items;

– SU-WL700 Wall-Mount Bracket (not supplied)

– SS-WAL700 Speaker System (not supplied)

– Spacers (black) (4) (supplied)

1 Place the supplied spacers (4-2).

1 Remove the four screws from the rear of the

monitor.

2 Place the spacers (black) on the screw holes

of the previous procedure.

2 Follow steps 4-3 to 4-4 referring to the

instruction manual supplied with the

Wall-Mount Bracket.

When using only the Wall-Mount

Bracket

Proceed to the following step 5 in this

manual.

When using the Speaker System

Proceed to the following step 3 in this

manual.

3 Lift the Lock Bracket to insert the Speaker

System (4-5).

Screw

Spacer

Mounting Bracket

Speaker System

Lock Bracket

Insert to the joint of

the monitor

This part goes on top of the Mounting Bracket

7

GB

Start-up Guide

4 Fix the Speaker System with two screws

(supplied with the Speaker System).

5 See the instruction manual supplied with

the Wall-Mount Bracket, and follow steps

4-6 to 4-7.

6 Connect the mains lead (supplied) to the

AC IN socket (5-1).

When installing the Speaker System

Fix the mains lead with the two hooks,

and drop the lead down from the right

edge of the monitor.

~

• When using with an HDMI equipment, also

connect the HDMI cable to the HDMI IN

socket (page 27).

7 Follow the instruction manual supplied

with the Wall-Mount Bracket to continue

installing this product on the wall.

~

• You cannot connect the cables to the monitor

after it is wall-mounted.

• When moving the monitor, lift it with a soft

cloth underneath to prevent damage. Do not

hold the speaker.

3: Connecting an aerial/Set

Top Box/recorder (e.g. DVD

recorder) to the Media

Receiver

Connecting a Set Top Box/recorder (e.g.

DVD recorder) with SCART

Screws

AC IN

Set Top Box/recorder (e.g. DVD recorder)

Scart lead

Media receiver

(Continued)

8

GB

Connecting a Set Top Box/recorder (e.g.

DVD recorder) with HDMI

~

• You can also connect equipment to the HDMI

input on the left side of the monitor.

Connecting the mains lead to the

media receiver

~

• Make sure to secure the mains lead.

4: Preventing the monitor

from toppling over (only

when placing on a TV stand)

Prepare the following item:

– Stand Support adaptor (supplied with SS-TBL700

Speaker System)

1 Remove the screw from the Table-Top

Stand.

2 Secure the Stand Support adaptor to the

Table-Top Stand.

3 Attach a rope or chain to the adaptor, and

then secure it to the TV stand (not

supplied). Make sure that there is no

excess slack in the rope or chain.

IN

Set Top Box/recorder (e.g. DVD recorder)

HDMI cable

Media receiver

D

C

IN

18V

Media receiver

to mains

socket

9

GB

Start-up Guide

1 Install a wood screw (4 mm in diameter, not

supplied) in the TV stand.

2 Install a machine screw (M6 × 12-15, not

supplied) into the screw hole of the monitor.

3 Tie the wood screw and the machine screw

with a strong cord.

5: Performing the initial set-

up

Inserting batteries into the remote

~

• Observe the correct polarity when inserting

batteries.

• Do not use different types of batteries together or

mix old and new batteries.

• Dispose of batteries in an environmentally

friendly way. Certain regions may regulate the

disposal of batteries. Please consult your local

authority.

• Handle the remote with care. Do not drop or step

on it, or spill liquid of any kind onto it.

• Do not place the remote in a location near a heat

source, a place subject to direct sunlight, or a

damp room.

Establishing the wireless

communication between the unit

~

• This unit can be placed in the same room.

• Keep about 30 cm to 20 m distance between the

monitor and media receiver when installing.

• Keep clear the area between the monitor and

media receiver. Otherwise the picture may

deteriorate.

• Rearrange the installation position of the monitor

and media receiver in case of fuzzy picture.

• Do not place either unit on a metallic rack.

• Do not use two units or more at the same time in

an area of radio interference.

1 Press 1 to turn on the unit power.

Push and lift the cover to open.

POWER button

Media receiver

(Continued)

10

GB

2 Check the LINK indicator on the media

receiver.

If wireless communication between the

media receiver and monitor is established,

this indicator lights up.

Performing the initial set-up

When you switch on the unit for the first

time, the Language menu appears on the

screen.

1 Press F/f/G/g to select the language

displayed on the menu screens, then press

.

~

• If the remote does not work, press F/f/G/g/ on

the media receiver (page 21) to select the

language. The remote registration screen appears.

2 Select “OK” then press .

3 Press F/f to select the country in which

you will operate the unit, then press .

If the country in which you want to use

the unit does not appear in the list, select

“-” instead of a country.

4 Press F/f to select the location type in

which you will operate the unit, then press

.

~

• Select “Home” for the best monitor settings

to use the monitor in the home.

5 Select “OK” then press .

Monitor

POWER button

LINK

LINK indicator

1-10

TV

COMPO-

NENTMONITOR

AV1 AV2

HDMI 2HDMI 1

HDMI

HDMI 3

DIGITAL/

ANALOG

THEATRE

SYNC MENU

AUDIO

EXT

Language

English

Nederlands

Français

Italiano

Deutsch

Türkçe

ББлгарски

Suomi

Dansk

Svenska

Norsk

Slovenčina

Română

Español

Català

Português

Polski

Česky

Magyar

Русский

OK

Next, the Media Receiver Initial Set-up will start.

Please make sure the Media Receiver is on.

United Kingdom

Ireland

Nederland

Select country

België/Belgique

Luxembourg

France

Italia

-

Country

Location

Home

Select location

Shop

11

GB

Start-up Guide

6 Press F/f to select “Antenna” or “Cable”,

then press .

If you select “Cable”, the screen for

selecting the scan type appears. See “To

tune the unit for Cable connection”

(page 11).

The unit starts searching for all available

digital channels, followed by all available

analogue channels. This may take some

time, so do not press any buttons on the

unit or remote while proceeding.

If a message appears for you to confirm

the aerial connection

No digital or analogue channels were

found. Check all the aerial/cable

connection and then press to start auto-

tuning again.

7 When the “Programme Sorting” menu

appears on the screen, follow the steps of

“Programme Sorting” (page 37).

If you do not change the order in which

the analogue channels are stored on the

unit, press RETURN to go to step 8.

8

For details, see page 33.

9

For details, see page 31.

10 Press .

The unit has now tuned in all the available

channels.

~

• When a digital broadcast channel cannot be

received, or when selecting a country in which

there are no digital broadcasts in step 3, the time

must be set after performing step 7.

To tune the unit for Cable connection

1 Press .

2 Press F/f to select “Quick Scan” or “Full

Scan”, then press .

“Quick Scan” : channels are tuned

according to the cable operator

information within the broadcast signal.

Recommended setting for “Frequency”,

“Network ID” and “Symbol Rate” is

“Auto”.

This option is recommended for fast

tuning when supported by your cable

operator.

If the “Quick Scan” does not tune, please

use the “Full Scan” method below.

“Full Scan” : All available channels are

tuned and stored. This procedure may take

some time.

This option is recommended when “Quick

Scan” is not supported by your cable

provider.

For further information about supported

cable providers, refer to support web site:

http://support.sony-europe.com/TV/

DVBC/

3 Press f to select “Start”, then press .

The unit starts searching for channels. Do

not press any buttons on the unit or

remote.

~

• Some cable providers do not support “Quick

Scan”. If no channels are detected using “Quick

Scan”, perform “Full Scan”.

Auto Tuning

OK Cancel

Do you want to start Auto Tuning?

Quick Start

Yes No

Do you want to enable Quick Start?

TV turns on more quickly but standby power

consumption is increased.

Control for HDMI

Yes No

Do you want to enable control for compatible

HDMI devices?

Choosing "Yes" will increase

standby power consumption.

12

GB

6: Operating optional

equipment using the remote

Connecting IR Blaster to the optional

equipment

Turn the power of the media receiver off

before connecting the IR Blaster.

Attach the IR Blaster near the remote sensor

(IR) of the equipment.

Performing the IR Blaster Set-up

By setting “IR Blaster Set-up”, this remote can

control most Sony Blu-ray Disc players, DVD

players, DVD recorders, and AV receivers, or

those of other manufacturers. Follow the steps

below to programme the remote.

1 Press HOME on the remote.

2 Press G/g to select “Settings”.

3 Press F/f to select “Media Receiver Set-

up”, then press .

4 Press F/f to select “IR Blaster Set-up”,

then press .

The “IR Blaster Set-up” screen appears.

5 Press F/f to select “Inputs” to register the

remote, then select the following items:

Type: Connected equipment category.

Make: Maker of the equipment.

Code: IR code. The default IR code “1”

appears when the maker of the equipment

is selected.

Test: Tests the power of the equipment

currently being set. Make sure the power

of the equipment turns on and off.

If the equipment is not working, or

some of the functions do not work

Enter the correct code or its alternatives (if

available) shown in the list in step 5. Note that

the list may not include codes for all models of

all brands.

~

• This function is not guaranteed to work with all

devices.

IR BLASTER

IR

Blaster

Media receiver

Optional equipment

IR Blaster Set-up

Inputs Type Make Code

AV1

AV2

HDMI 1

HDMI 2

HDMI 3

Component

-

Blu-ray Disc

-

Sony

-

1

-

13

GB

Start-up Guide

Using optional equipment

For details, refer to the operating instructions

supplied with the connected equipment. Some

buttons may not work depending on the

connected equipment.

1 Press HDMI 1, HDMI 2, HDMI 3, AV1,

AV2 or COMPONENT.

2 Press EXT.

3 While the EXT button lights up, press \/1

to turn the equipment on, then operate the

equipment using the following buttons.

z

•The N button has a tactile dot. Use the tactile dot

as a reference when operating other equipment.

REC

WIRELESS MENU

TOP MENU

MENU

F1 F2

BD/DVD

REC PAUSE REC STOP

TV

COMPO-

NENTMONITOR

AV1 AV2

HDMI 2HDMI 1

HDMI

HDMI 3

EXT

DIGITAL/

ANALOG

THEATRE

SYNC MENU

AUDIO

1

4

7

2

5

8

0

3

6

9

PROG

TV

1

2

3

4

5

7

6

Item Description

1 BD/DVD

operating

buttons

• ./>: Goes to the

beginning of the previous/

next title/chapter/scene/

track.

• / : Replays the scene/

briefly fast forwards the

scene.

• m/M: Fast reverses/fast

forwards the disc when

pressed during playback.

• N: Plays a disc at normal

speed.

• X: Pauses the playback.

• x: Stops the playback.

2 F/f/G/g/3 Selects / confirms an item.

3 HOME Opens the menu.

4 DVD record

buttons

• z REC: Starts the

recording.

• X REC PAUSE: Pauses the

recording.

• x REC STOP: Stops the

recording.

5 F1/F2 Selects a function when using

a combination unit (e.g. a

DVD/HDD).

6 BD/DVD

MENU

Displays the BD/DVD disc

menu.

7 BD/DVD

TOP MENU

Displays the top menu of the

BD/DVD disc.

14

GB

Attaching the Stand for

Media Receiver

The media receiver can also be used vertically

with the supplied stand.

1 Match the lug on the centre of the stand

and the hole on the right side of the media

receiver.

Removing the Terminal

Cover for Monitor

Hold the terminal cover as illustrated.

Pull down 1, then remove at an angle 2.

Stand

15

GB

Safety

Information

Installation/Set-up

Install and use the TV set in accordance with the instructions below

in order to avoid any risk of fire, electrical shock or damage and/or

injuries.

Installation

s The TV set should be installed near an easily accessible mains

socket.

s Place the TV set on a stable, level surface.

s Only qualified service personnel should carry out wall

installations.

s For safety reasons, it is strongly recommended that you use

Sony accessories, including:

– Wall-Mount Bracket SU-WL700

– Speaker System SS-TBL700/SS-WAL700

s Be sure to use the screws supplied with the Wall-mount bracket

when attaching the mounting hooks to the TV set.

The supplied screws are designed so that they are 8 mm to 12

mm in length when measured from the attaching surface of the

mounting hook.

The diameter and length of the screws differ depending on the

Wall-mount bracket model.

Use of screws other than those supplied may result in internal

damage to the TV set or cause it to fall, etc.

Transporting

s Before transporting the TV set,

disconnect all cables.

s Two or more people are

needed to transport a large TV

set.

s When transporting the TV set

by hand, hold it as shown on

the right. Do not put stress on

the LCD panel and the frame

around the screen.

s When lifting or moving the TV

set, hold it firmly from the

bottom.

s When transporting the TV set,

do not subject it to jolts or

excessive vibration.

s When transporting the TV set

for repairs or when moving,

pack it using the original

carton and packing material.

Ventilation

s Never cover the ventilation holes or insert anything in the

cabinet.

s Leave space around the TV set as shown below.

s It is strongly recommended that you use a Sony wall-mount

bracket in order to provide adequate air-circulation.

Monitor

Installed on the wall

Installed with stand

Media receiver

s To ensure proper ventilation and prevent the collection of dirt

or dust:

– Do not lay the TV set flat, install upside down, backwards,

or sideways.

– Do not place the TV set on a shelf, rug, bed or in a closet.

– Do not cover the TV set with a cloth, such as curtains, or

items such as newspapers, etc.

– Do not install the TV set as shown below.

Spacer (black)

Screw M6 ×16 (supplied with

the Wall-Mount Bracket)

Mounting Hook

Rear of the monitor

8mm – 12mm

Be sure to hold the

bottom of the panel,

not the front part.

10 cm

30 cm

Leave at least this space around the set.

30 cm

10 cm 10 cm

6 cm

Leave at least this space around the set.

Installed horizontally

Installed vertically

Top Front

Leave at least this space around the set.

20 cm

8 cm 8 cm

20 cm

6 cm 6 cm

10 cm

8 cm 8 cm

10 cm

(Continued)

16

GB

Mains lead

Handle the mains lead and socket as follows in order to avoid any

risk of fire, electrical shock or damage and/or injuries:

– Use only mains leads supplied by Sony, not other suppliers.

– Insert the plug fully into the mains socket.

– Operate the TV set on a 220-240 V AC supply only.

– When wiring cables, be sure to unplug the mains lead for your

safety and take care not to catch your feet on the cables.

– Disconnect the mains lead from the mains socket before

working on or moving the TV set.

– Keep the mains lead away from heat sources.

– Unplug the mains plug and clean it regularly. If the plug is

covered with dust and it picks up moisture, its insulation may

deteriorate, which could result in a fire.

Notes

s Do not use the supplied mains lead on any other equipment.

s Do not pinch, bend, or twist the mains lead excessively. The

core conductors may be exposed or broken.

s Do not modify the mains lead.

s Do not put anything heavy on the mains lead.

s Do not pull on the mains lead itself when disconnecting the

mains lead.

s Do not connect too many appliances to the same mains socket.

s Do not use a poor fitting mains socket.

Prohibited Usage

Do not install/use the TV set in locations, environments or

situations such as those listed below, or the TV set may malfunction

and cause a fire, electrical shock, damage and/or injuries.

Location:

Outdoors (in direct sunlight), at the seashore, on a ship or other

vessel, inside a vehicle, in medical institutions, unstable locations,

near water, rain, moisture or smoke.

Environment:

Places that are hot, humid, or excessively dusty; where insects may

enter; where it might be exposed to mechanical vibration, near

flammable objects (candles, etc).

The TV set shall not be exposed to dripping or splashing and no

objects filled with liquids, such as vases, shall be placed on the TV.

Situation:

Do not use when your hands are wet, with the cabinet removed, or

with attachments not recommended by the manufacturer.

Disconnect the TV set from mains socket and aerial during

lightning storms.

Broken pieces:

s Do not throw anything at the TV set. The screen glass may

break by the impact and cause serious injury.

s If the surface of the TV set cracks, do not touch it until you have

unplugged the mains lead. Otherwise electric shock may result.

When not in use

s If you will not be using the TV set for several days, the TV set

should be disconnected from the mains for environmental and

safety reasons.

s As the TV set is not disconnected from the mains when the TV

set is just turned off, pull the plug from the mains to disconnect

the TV set completely.

s However, some TV sets may have features that require the TV

set to be left in standby to work correctly.

For children

s Do not allow children to climb on the TV set.

s Keep small accessories out of the reach of children, so that they

are not mistakenly swallowed.

If the following problems occur...

Turn off the TV set and unplug the mains lead immediately if any

of the following problems occur.

Ask your dealer or Sony service centre to have it checked by

qualified service personnel.

When:

– Mains lead is damaged.

– Poor fitting of mains socket.

– TV set is damaged by being dropped, hit or having something

thrown at it.

– Any liquid or solid object falls through openings in the cabinet.

NOTE ON MAINS ADAPTOR

Warning

To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

To prevent fire or shock hazard, do not place objects filled with

liquids, such as vases, on the apparatus.

Do not install this equipment in a confined space, such as a

bookshelf or similar unit.

s Please ensure that the mains socket is installed near the

equipment and shall be easily accessible.

s Be sure to use the supplied mains adaptor and mains lead.

s Do not use any other mains adaptor. It may cause a malfunction.

s Connect the mains adaptor to an easily accessible mains socket.

s Do not coil the mains lead around

the mains adaptor. The core wire

may be cut and/or it may cause a

malfunction of the media receiver.

s Do not touch the mains adaptor

with wet hands.

s If you notice an abnormality in the

mains adaptor, disconnect it from the mains socket

immediately.

s The set is not disconnected from the mains source as long as it

is connected to the mains socket, even if the set itself has been

turned off.

About LCD Monitor Temperature

When the LCD Monitor is used for an extended period, the panel

surrounds become warm. You may feel hot when touching there by

the hand.

Air circulation is

blocked.

Air circulation is

blocked.

Wall

17

GB

Precautions

Viewing the TV

s View the TV in moderate light, as viewing the TV in poor light

or during long period of time, strains your eyes.

s When using headphones, adjust the volume so as to avoid

excessive levels, as hearing damage may result.

LCD Screen

s Although the LCD screen is made with high-precision

technology and 99.99% or more of the pixels are effective,

black dots may appear or bright points of light (red, blue, or

green) may appear constantly on the LCD screen. This is a

structural property of the LCD screen and is not a malfunction.

s Do not push or scratch the front filter, or place objects on top of

this TV set. The image may be uneven or the LCD screen may

be damaged.

s If this TV set is used in a cold place, a smear may occur in the

picture or the picture may become dark. This does not indicate

a failure. These phenomena disappear as the temperature rises.

s Ghosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

s The screen and cabinet get warm when this TV set is in use.

This is not a malfunction.

s The LCD screen contains a small amount of liquid crystal.

Some fluorescent tubes used in this TV set also contain

mercury. Follow your local ordinances and regulations for

disposal.

Handling and cleaning the screen surface/

cabinet of the TV set

Be sure to unplug the mains lead connected to the TV set from

mains socket before cleaning.

To avoid material degradation or screen coating degradation,

observe the following precautions.

s To remove dust from the screen surface/cabinet, wipe gently

with a soft cloth. If dust is persistent, wipe with a soft cloth

slightly moistened with a diluted mild detergent solution.

s Never use any type of abrasive pad, alkaline/acid cleaner,

scouring powder, or volatile solvent, such as alcohol, benzene,

thinner or insecticide. Using such materials or maintaining

prolonged contact with rubber or vinyl materials may result in

damage to the screen surface and cabinet material.

s Periodic vacuuming of the ventilation opening is recommended

to ensure to proper ventilation.

Optional Equipment

s Keep optional components or any equipment emitting

electromagnetic radiation away from the TV set. Otherwise

picture distortion and/or noisy sound may occur.

s This equipment has been tested and found to comply with the

limits set out in the EMC Directive using a connection signal

cable shorter than 3 meters.

Wireless Function of the unit

s If wireless equipment using the same frequency (5GHz band) as

the unit is working near the unit, noise may appear in pictures

or sound, or no picture may result. Also, other wireless or radio

equipment may cause interference. Keep 5GHz band wireless

equipment, such as a wireless LAN or cordless phones, away

from the unit.

s The picture may be influenced depending on the installation

environment or situation of the monitor and media receiver

(page 9).

s As the media receiver and monitor communicate wirelessly,

pictures from the media receiver may deteriorate compared to

those from the equipment connected to the monitor with HDMI.

s It may take time to transmit pictures depending on the types of

signal, fast motion, such as game pictures, etc.

s If pictures from a PC or still images, such as EPG, are

displayed, flickering or blurring may occur.

s This unit can be used only in combination with the supplied

monitor and media receiver.

s Do not operate this unit near medical equipment (pacemaker,

etc.), as malfunction of the medical equipment may result.

s Although this unit transmits/receives scrambled signals, be

careful of unauthorised interception. We cannot be responsible

for any trouble as a result.

RF Remote

s If wireless equipment using the same frequency (2.4GHz band)

as the unit is working near the unit, the remote may not operate

properly.

Also, microwave ovens or radio equipment may cause

interference. Keep 2.4 GHz band wireless equipment away

from the unit.

Disposal of the TV set

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on its packaging

indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused

by inappropriate waste handling of this product. The recycling of

materials will help to conserve natural resources. For more detailed

information about recycling of this product, please contact your

local Civic Office, your household waste disposal service or the

shop where you purchased the product.

Disposal of waste batteries

(applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the battery or on the packaging

indicates that the battery provided with this

product shall not be treated as household

waste. On certain batteries this symbol might

be used in combination with a chemical symbol. The chemical

symbols for mercury (Hg) or lead (Pb) are added if the battery

contains more than 0.0005% mercury or 0.004% lead. By ensuring

these batteries are disposed of correctly, you will help prevent

potentially negative consequences for the environment and human

health which could otherwise be caused by inappropriate waste

handling of the battery. The recycling of the materials will help to

conserve natural resources. In case of products that for safety,

performance or data integrity reasons require a permanent

connection with an incorporated battery, this battery should be

replaced by qualified service staff only. To ensure that the battery

will be treated properly, hand over the product at end-of-life to the

applicable collection point for the recycling of electrical and

electronic equipment. For all other batteries, please view the section

on how to remove the battery from the product safely. Hand the

battery over to the applicable collection point for the recycling of

waste batteries. For more detailed information about recycling of

this product or battery, please contact your local Civic Office, your

household waste disposal service or the shop where you purchased

the product.

18

GB

Remote and Unit Controls/Indicators

As the unit and the supplied remote communicate by radio frequency, you can operate the unit

without aiming the remote at the unit.

Remote

Button Description

1 TV "/1

(TV standby)

Press to turn the unit on and off from standby

mode.

2 EXT Press to operate equipment with the IR

Blaster attached, by the remote (page 13).

z

• Replace the batteries when the EXT button

flashes three times.

3

(Subtitle

setting)

Press to change the subtitle language

(page 39) (in digital mode only).

4 AUDIO In analogue mode: Press to change the dual

sound mode (page 35).

In digital mode: Press to change the language

to be used for the programme currently being

viewed (page 39).

5 /

(Info/Text

reveal)

In digital mode: Displays details of the

programme currently being viewed.

In analogue mode: Displays information.

Press once to display the current channel

number and screen mode. Press again to

display clock information. Press a third time

to remove the display from the screen.

In Text mode (page 24): Reveals hidden

information (e.g. answers to a quiz).

6 /

(Input select/

Text hold)

Press to display a list of inputs (page 28).

In Text mode: Press to hold the current page.

7 F/f/G/g/ Press F/f/G/g to move the on-screen cursor.

Press to select/confirm the highlighted

item. When playing a photo file: Press to

pause/start a slideshow. Press F/G to select

the previous file. Press f/g to select the next

file.

8 OPTIONS Press to display a list that contains “Device

Control”, or shortcuts to some setting menus.

Use the “Device Control” menu to operate

equipment that is compatible with control for

HDMI. The listed options vary depending on

the input source.

REC

WIRELESS MENU

TOP MENU

MENU

F1 F2

BD/DVD

REC PAUSE REC STOP

TV

COMPO-

NENTMONITOR

AV1 AV2

HDMI 2HDMI 1

HDMI

HDMI 3

EXT

DIGITAL/

ANALOG

THEATRE

SYNC MENU

AUDIO

1

4

7

2

5

8

0

3

6

9

PROG

TV

1

6

7

8

2

3

5

4

z

• The number 5, PROG +,

AUDIO and buttons

have tactile dots. Use the

tactile dots as references

when operating the TV.

19

GB

9 HOME Press to display the media receiver Home

menu in the media receiver mode (page 32),

or monitor Home menu in the monitor mode

(page 41).

0 Coloured

buttons

When the coloured buttons are available, an

operation guide appears on the screen.

Follow the operation guide to perform a

selected operation (page 24, 25, 26).

qz Number

buttons

In TV mode: Press to select channels. For

channel numbers 10 and above, press the

second and third digits in quick succession.

In Text mode: Press to enter a page number.

qs (Favourite) Press to display the digital favourite list that

you have specified (page 26).

qd PROG+/–/ / In TV mode: Press to select the next (+) or

previous (–) channel.

In Text mode: Press to select the next or

previous page.

qf (Previous

channel)

Press to return to the channel that was last

viewed (for more than five seconds).

qg WIRELESS

MENU

Press to display “Wireless Channel Set-up”

(page 46).

qh % (Mute) Press to mute the sound. Press again to

restore the sound.

z

• In standby mode, if you want to turn on the

monitor without sound, press this button.

qj 2+/– (Volume) Press to adjust the volume.

qk / (Text) Press to display text information (page 24).

ql RETURN / Press to return to the previous screen of the

displayed menu. When playing a photo file:

Press to stop the playback. (The display

returns to the file or folder list.)

w; GUIDE /

(EPG)

Press to display the Digital Electronic

Programme Guide (EPG) (page 25).

Button Description

REC

WIRELESS MENU

TOP MENU

MENU

F1 F2

BD/DVD

REC PAUSE REC STOP

TV

COMPO-

NENTMONITOR

AV1 AV2

HDMI 2HDMI 1

HDMI

HDMI 3

EXT

DIGITAL/

ANALOG

THEATRE

SYNC MENU

AUDIO

1

4

7

2

5

8

0

3

6

9

PROG

TV

9

0

qa

qs

qf

qg

qh

qk

ql

w;

qj

qd

(Continued)

20

GB

wa ANALOG/

DIGITAL

Press to display the analogue or digital

channel that was last viewed.

ws THEATRE You can set Theatre Mode to on or off. When

Theatre Mode is set to on, the optimum audio

output (if the unit is connected with an audio

system using an HDMI cable) and picture

quality for film-based contents are

automatically set.

z

• If you turn the unit off, Theatre Mode is

also turned off.

• “Control for HDMI” (BRAVIA Sync) is

only available with the connected Sony

equipment that has the BRAVIA Sync or

BRAVIA Theatre Sync logo or is

compatible with control for HDMI.

wd SYNC MENU Displays the menu of connected HDMI

equipment. While viewing other input

screens or TV programmes, “HDMI Device

Selection” is displayed when the button is

pressed.

z

• “Control for HDMI” (BRAVIA Sync) is

only available with the connected Sony

equipment that has the BRAVIA Sync logo

or is compatible with control for HDMI.

wf

(Screen mode)

Press to change the screen format (page 24).

wg Buttons for

using optional

equipment

You can operate the equipment connected to

the unit (page 13).

wh HDMI1/2/3,

MONITOR

HDMI, AV1/2,

COMPONENT

Press to select the input source.

wj "/1 Press to turn equipment connected to the unit

on or off (page 13).

Button Description

REC

WIRELESS MENU

TOP MENU

MENU

F1 F2

BD/DVD

REC PAUSE REC STOP

TV

COMPO-

NENTMONITOR

AV1 AV2

HDMI 2HDMI 1

HDMI

HDMI 3

EXT

DIGITAL/

ANALOG

THEATRE

SYNC MENU

AUDIO

1

4

7

2

5

8

0

3

6

9

PROG

TV

wa

wg

ws

wd

wg

wf

wj

wh

Strona jest ładowana ...

Sony KDL-40ZX1 Instrukcja obsługi

Sony KDL-40ZX1 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty