IKEA LHGA4K Instrukcja obsługi

LAGAN

HGA4K

GB

PL

HU

PL HU

ENGLISH 4

PL POLSKI 22

HU MAGYAR 43

LANGUAGE, JĘZYK , NYELV

COUNTRY, KRAJ, ORSZÁG

Contents

Safety information 4

Safety instructions 5

Product description 8

Daily use 9

Hints and tips 10

Care and cleaning 10

Troubleshooting 11

Technical information 12

Installation 14

IKEA GUARANTEE 19

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read

the supplied instructions. The manufacturer is not responsible if

an incorrect installation and use causes injuries and damages.

Always keep the instructions with the appliance for future

reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep children and pets away from the appliance when it

operates or when it cools down. Accessible parts are hot.

• If the appliance has a child safety device, we recommend you

activate it.

• Cleaning and user maintenance shall not be made by

children without supervision.

• Children of less than 3 years should be kept away unless

continuously supervised.

ENGLISH

4

General Safety

• The appliance and its accessible parts become hot during

use. Do not touch the heating elements.

• Do not operate the appliance by means of an external timer

or separate remote-control system.

• Unattended cooking on a hob with fat or oil can be

dangerous and may result in fire.

• Never try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire

blanket.

• Do not store items on the cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids should

not be placed on the hob surface since they can get hot.

• Do not use a steam cleaner to clean the appliance.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

• Where the appliance is directly connected to the power

supply, an all-pole isolating switch with a contact gap is

required. Complete disconnection in compliance with the

conditions specified in overvoltage category III must be

guaranteed. The earth cable is excluded from this.

• When you route the mains cable, make sure that the cable

doesn't come into direct contact (for example using insulating

sleeving) with parts that can reach temperatures of more than

50°C above room temperature.

Safety instructions

Installation

Warning! Only a qualified

person must install this

appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Obey the installation instruction supplied

with the appliance.

• Keep the minimum distance from the

other appliances and units.

ENGLISH 5

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance from

steam and moisture.

• Do not install the appliance adjacent to

a door or under a window. This prevents

hot cookware to fall from the appliance

when the door or the window is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer, is sufficient for air

circulation.

• The bottom of the appliance can get hot.

Make sure to install a non-combustile

separation panel under the appliance to

prevent access to the bottom.

Refer to the Assembly Instructions.

Electrical Connection

Warning! Risk of fire and

electrical shock.

• All electrical connections should be made

by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make

sure that the appliance is disconnected

from the power supply.

• Make sure that the electrical information

on the rating plate agrees with the

power supply. If not contact an

electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can

make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the mains

cable. Contact an Authorised Service

Centre or an electrician to change a

damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in such

a way that it cannot be removed without

tools.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains

plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you disconnect

the appliance from the mains at all poles.

The isolation device must have a contact

opening width of minimum 3 mm.

Gas connection

• All gas connections should be made by a

qualified person.

• Before installation, make sure that the

local distribution conditions (nature of the

gas and gas pressure) and the

adjustment of the appliance are

compatible.

• Make sure that there is air circulation

around the appliance.

• The information about the gas supply is

on the rating plate.

• This appliance is not connected to a

device, which evacuates the products of

combustion. Make sure to connect the

ENGLISH

6

appliance according to current

installation regulations. Pay attention to

requirements regarding adequate

ventilation.

Use

Warning! Risk of injury, burns

and electrical shock.

• Remove all the packaging, labelling and

protective film (if applicable) before first

use.

• Use this appliance in a household

environment.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings

are not blocked.

• Do not let the appliance stay unattended

during operation.

• Set the cooking zone to “off” after each

use.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become hot.

• Do not operate the appliance with wet

hands or when it has contact with water.

• Do not use the appliance as a work

surface or as a storage surface.

• When you place food into hot oil, it may

splash.

Warning! Risk of fire and

explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food remnants,

can cause fire at a lower temperature

than oil used for the first time.

• Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

Warning! Risk of damage to the

appliance.

• Do not keep hot cookware on the control

panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or cookware

fall on the appliance. The surface can be

damaged.

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the

appliance.

• Use only stable cookware with the

correct shape and diameter larger than

the dimensions of the burners.

• Make sure the flame does not go out

when you quickly turn the knob from the

maximum to the minimum position.

• Use only the accessories supplied with

the appliance.

• Do not install a flame diffuser on the

burner.

• The use of a gas cooking appliance

results in the production of heat and

moisture. Provide good ventilation in the

room where the appliance is installed.

• Prolonged intensive use of the appliance

may call for additional ventilation, for

example opening of a window, or more

effective ventilation, for example

increasing the level of mechanical

ventilation where present.

• This appliance is for cooking purposes

only. It must not be used for other

purposes, for example room heating.

• Do not let acid liquids, for example

vinegar, lemon juice or limescale

remover, touch the hob. This can cause

matt patches.

Care and cleaning

• Clean regularly the appliance to prevent

the deterioration of the surface material.

• Deactivate the appliance and let it cool

down before you clean it.

• Disconnect the appliance from the

electrical supply before maintenance.

• Do not use water spray and steam to

clean the appliance.

ENGLISH

7

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal objects.

• Do not clean the burners in the

dishwasher.

Disposal

Warning! Risk of injury or

suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

• Flat the external gas pipes.

Product description

Cooking surface layout

8

9

1

2

7

6

5

4

3

10

1

Auxiliary burner

2

Rapid burner

3

Semi Rapid burner

4

Semi Rapid burner

5

Semi Rapid burner control knob

6

Semi Rapid burner control knob

7

Rapid burner control knob

8

Auxiliary burner control knob

9

Ignition button

10

Removable pan supports

Control knob

The burner control knobs are situated on

the right side of the hob.

Symbol Description

there is no gas sup-

ply/off position

there is maximum

gas supply

there is minimum

gas supply

ENGLISH 8

Daily use

Warning! Refer to Safety

chapters.

Burner overview

1

2

3

4

5

1

Burner cap

2

Burner crown

3

Ignition candle

4

Injector

5

Thermocouple

Ignition of the burner

Always ignite the burner before

positioning pots or pans

Warning! Be very careful when

you use open fire in the kitchen

environment. The manufacturer

declines any responsibility in

case of the flame misuse.

To ignite the burner:

1. Push the electric ignition button witch is

marked by a little spark , at the same

time turn the relevant control knob

anticlockwise to maximum position .

2. Release the spark generator button

when burner lights but keep the control

knob on this position for equal or less

than 10 seconds; this will let

thermocouple to warm up. If not, the gas

supply will be interrupted.

3. After the flame is regular, adjust it as

preferred.

If after a few attempts the burner

does not ignite, check that the

crown and its cap are in correct

positions.

Warning! Do not keep control

knob pressed for more than 15

seconds. If the burner does not

light after 15 seconds, release

the control knob, turn it into off

position and wait for at least 1

minute before trying to light the

burner again.

In the absence of electricity you

can ignite the burner without

electrical device; in this case

approach the burner with a

flame, push the relevant knob

down and turn it counter-

clockwise to maximum gas

release position.

Warning! Maintain extreme

caution while operating with

open fire in kitchen environment.

Manufacturer declines any

responsibility in case of misuse of

flame.

If the burner accidentally goes

out, turn the control knob to the

off position and wait for at least

1 minute before trying to light it

again.

ENGLISH 9

When switching on the mains,

after installation or a power cut,

it is quite normal for the spark

generator to be activated

automatically.

Turning the burners off

To put the flame out, turn the relevant

control knob to the symbol .

Warning! Always turn the flame

down or switch it off before

removing the pans of the burner.

Hints and tips

Warning! Refer to Safety

chapters.

Energy savings

• If possible, always place lids on the pans.

• As soon as liquid starts boiling, turn

down the flame to barely keep the liquid

simmering.

Diameter of cookware

Use pots and pans with bottom fitting the

size of burner used.

Burner minimum

diameter of

pots and

pans (mm)

maximum

diameter

pots and

pans (mm)

Front left (Rap-

id)

180 260

Burner minimum

diameter of

pots and

pans (mm)

maximum

diameter

pots and

pans (mm)

Front right (Aux-

iliary)

80 180

Back left (Semi-

rapid)

120 220

Back right

(Semi-rapid)

120 220

The bottom of the cookware should be as

thick and flat as possible.

Care and cleaning

Warning! Refer to Safety

chapters.

General information

Warning! Switch the appliance

off and let it cool down before

you clean it.

Warning! For safety reasons, do

not clean the appliance with

steam blasters or high-pressure

cleaners.

ENGLISH 10

Warning! Do not use abrasive

cleaners, steel wool pads or

acids, they will damage the

appliance.

To remove any food remains wash the

enamelled elements, caps and crowns, with

warm soapy water.

Wash stainless steel elements with water,

and then dry with a soft cloth.

This model is equipped with electrical

ignition, it is obtained through ceramic

"candle" with electrode. Keep them well

clean to avoid difficult lightning.

The pan supports are not

dishwasher proof, they must be

washed by hand. After cleaning,

make sure that the pan supports

are correctly positioned.

Periodically ask the After Sales

Service to check the conditions of

the gas supply pipe and the

pressure adjuster, if it is fitted

(this service is not free of charge).

After cleaning, be sure to wipe dry with a

soft cloth.

Troubleshooting

Warning! Refer to Safety

chapters.

What to do if...

Problem Possible cause Remedy

There is no spark when light-

ing the gas

There is no electrical supply Check that the unit is plug-

ged in and the electrical

supply is switched on.

There is no electrical supply Check the house electric in-

stallation fuse.

Burner cap and crown are

placed incorrectly

Check if the burner cap and

crown have been replaced

correctly, e.g. after cleaning.

The flame extinguishes im-

mediately after ignition

Thermocouple is not heated

up sufficiently

After lightning the flame,

keep the knob pushed for

about 10 seconds.

The gas ring burns unevenly Burner crown is blocked with

food residues

Check if the main injector is

not blocked and the burner

crown is clear of food parti-

cles.

If there is a fault, first try to find a solution to

the problem yourself. If you cannot find a

solution to the problem yourself, contact the

After Sales Service.

ENGLISH 11

If you operated the appliance

wrongly, or the installation was

not carried out by a registered

engineer, the visit from the

customer service technician or

dealer may not take place free

of charge, even during the

warranty period.

Technical information

Hob dimensions

width 580 mm

depth 500 mm

built in height 34 mm

Gas data

Appliance Class: 3

Appliance Category: II2ELs3B/P

Appliance gas supply: Natural gas G20 (2E)

20 mbar

This appliance is designed for use with

natural gas but can be converted for use

with other gas type according to table

below.

For Poland only:

Type of Gas Burner type Injectors

1/100 mm

Nominal

Power kW

Nominal

Flow g/h

Reduced

Power kW

by-pass

1/100 mm

G20 20

mbar

Rapid

(large)

119 3.0 - 0.75 40

Semi-rapid

(medium)

96 2.0 - 0.45 30

Auxiliary

(small)

70 1.0 - 0.33 26

G2.350 13

mbar

Rapid

(large)

181 3.0 - 0.75 40

Semi-rapid

(medium)

150 2.0 - 0.45 30

ENGLISH 12

Type of Gas Burner type Injectors

1/100 mm

Nominal

Power kW

Nominal

Flow g/h

Reduced

Power kW

by-pass

1/100 mm

Auxiliary

(small)

105 1.0 - 0.33 26

G30/G31

37-37 mbar

Rapid

(large)

77 2.8 204 0.75 40

Semi-rapid

(medium)

66 2.0 145 0.45 30

Auxiliary

(small)

46 1.0 73 0.33 26

For Hungary only:

TOTAL POWER:

G20 (2H) 25 mbar = 7,8 kW

G25.1 (2HS) 25 mbar = 7,7 kW

G30/31 (3B/P) 30/30 mbar = 567 g/h

Type of Gas Burner type Injectors

1/100 mm

Nominal

Power kW

Nominal

Flow g/h

Reduced

Power kW

by-pass

1/100 mm

G20 25

mbar

Rapid

(large)

113 3.0 - 0.75 40

Semi-rapid

(medium)

92 1.9 - 0.45 30

Auxiliary

(small)

65 1.0 - 0.33 26

G25.1 25

mbar

Rapid

(large)

126 2.9 - 0.75 40

Semi-rapid

(medium)

100 1.9 - 0.45 30

Auxiliary

(small)

71 1.0 - 0.33 26

G30/G31

30-30 mbar

Rapid

(large)

86 2.8 204 0.75 40

ENGLISH 13

Type of Gas Burner type Injectors

1/100 mm

Nominal

Power kW

Nominal

Flow g/h

Reduced

Power kW

by-pass

1/100 mm

Semi-rapid

(medium)

71 2.0 145 0.45 30

Auxiliary

(small)

50 1.0 73 0.33 26

Rating Plate

402-957-69

Made In Italy

21552

PQM

TYPE HM6L40-4/VA/060ce

IKEA of Sweden AB

SE-343 81 Älmhult

G20 20 mbar = 8 kW

230 V

~

50 Hz

II2ELs3B/P

51BS3464

ZO 0051

0000000000000000000000

S.N. 000 00000 Max power = 6WPNC. 949640187

G2.350 13 mbar = 8 Kw

G30/G31 37/37mbar = 567g/h

The graphic above represents the rating

plate of the appliance (without serial

number which is generated dynamically

during the production process), which is

located at its underneath surface of the

casing.

Dear Customer, please apply here aside

the sticker you can find in the dedicate

plastic bag inserted inside the hob

packaging. This will allow us to assist you

better, by identifying precisely your hob, in

case you will need in future our assistance.

Thank you for your help!

Installation

Warning! Refer to Safety

chapters.

ENGLISH 14

General information

Warning! This appliance must be

installed, connected or repaired

only by a registered competent

person to the relevant gas

standard. Use only parts

provided with the product. Use

only original spare parts.

Manufacturer is not responsible for any

injury to persons and pets or damage to

property caused by failure to comply

following requirements.

Caution! To proceed with the

installation refer to the assembly

instructions.

Warning! Installation process

must follow the laws, ordinances,

directives and standards

(electrical safety rules and

regulations, proper recycling in

accordance with the regulations,

etc.) in force in the country of use!

Ensure that the local distribution

conditions (nature of the gas and

gas pressure) and the adjustment

of the appliance are compatible

before proceeding with the

installation.

The parameters of adjustment

setting for this appliance are

stated on the rating plate (refer

to the Technical information

chapter).

Warning! The appliance must be

earthed!

Warning! Risk of injury from

electrical current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of

voltage.

• Loose and inappropriate plug and

socket connections can make the

terminal overheat.

• Have the clamping connections correctly

installed.

• Use strain relief clamp on cable.

Caution! You must observe the

minimum distances to other

appliances and furniture cabinets

or other units according to

Assembly Instruction. The

minimum distance to be

maintained from the cut out edge

to lateral wall must be 100 mm. If

there is no oven beneath the hob

insert a dividing panel at a

minimum distance of 20 mm from

the bottom of the hob.

Protect the cut surfaces of the worktop

against moisture using a suitable sealant

included in the product in fitting bag. The

sealant seals the appliance to the work top

with no gap. Do not use silicon sealant

between the appliance and the worktop.

Avoid installing the appliance next to doors

and under windows as hot cookware may

be knocked off the rings when doors and

windows are opened.

Gas connection

Warning! Only a qualified

person must install this

appliance.

Warning! This appliance is not

connected to a combustion

products evacuation device.

Installation must comply with current local

regulation.

The connection of the cooktop to the gas

pipe network or gas cylinder must be made

ENGLISH

15

by means of a rigid copper or steel pipe

with fittings complying with local

regulations, or by means of a continuous

surface stainless steel hose complying with

local regulations.

If you see any abnormalities do

not repair the pipe, contact local

After Sales Service (refer to the

Service chapter).

The connection must be installed correctly,

fixed into hob connection pipe. Otherwise it

will cause leakage of gas.

Warning! Once the installation is

complete, check the perfect seal

of every pipe fixing. Use soapy

water, never flame.

Electrical connection

The electrical work necessary to install the

appliance must be done by a qualified

electrician or competent person, according

to the current regulations

Before connecting, check that the nominal

voltage of the appliance stated on the

rating plate, corresponds to the available

supply voltage. Also, check the power

rating of the appliance and ensure that the

wire is suitably sized to suit the appliance

power rating (refer to the Technical

information chapter).

This appliance is supplied with a mains

cable. It has to be supplied with a correct

plug which can hold the load that the rating

plate rates.

The plug has to be fitted in a proper socket.

If connecting the appliance directly to the

electric system, it is necessary that you

install a double pole switch between the

appliance and the electricity supply, with a

minimum gap of 3 mm between the switch

contacts. The double pole has to be of a

type suitable for the required load in

compliance with the current rules.

The connection cable has to be placed in

order that, in each part, it cannot reach a

90 °C temperature. The blue neutral cable

must be connected to the terminal block

marked with "N". The brown (or black)

phase cable (fitted in the terminal block

contact marked with "L") must always be

connected to the live phase.

The rating plate is located on the lower

casing of the hob.

Replacement of the connection cable

Warning! The replacement of the

connection cable requires the

specific equipment of a

technician.

1

2

In this case, only cable type H05V2V2-F

T90 must be used. The cable section must

be suitable to the voltage and the working

temperature. The yellow/green earth wire

2

must be approximately 2 cm longer than

ENGLISH

16

the brown (or black) phase wire

1

(previous figure).

Gas setting conversion

This model is designed for use

with natural gas but can be

converted for use with butane or

propane gas providing the

correct injectors. The injectors not

supplied with the appliance have

to be ordered from After Sales

Service (refer to the Service

chapter).

For data concerning injector replacement,

refer to the chapter Technical information

Warning! Conversion or

replacement can only be

performed by a registered

installer.

To replace injectors:

1. Remove pan support.

2. Remove burner cap and crown.

3. With a socket spanner 7 unscrew and

remove the injectors, replace them with

the ones required for the type of gas in

use.

4. Reassemble the parts, following the

same procedure backwards.

Replace the rating label (placed

near gas supply pipe) with

relevant one for the new type of

gas supply before sealing the

appliance. If the appliance is

already sealed please stick it

directly on the user manual

booklet after Technical

information chapter close to the

rating plate drawing.

You can find this label in

package supplied with

appliance.

If the feeding gas pressure will

be different or variable,

comparing with the required, you

must install an appropriate

pressure adjuster, which is not

supplied with the product and if

needed must be ordered

separately from the local After

Sales Service (refer to the Service

chapter). The pressure adjuster

must be fitted on gas supply

pipe, in compliance with the rules

of the force.

The rating plate is located on the lower

casing of the hob.

Conversion to G2.350 gas

• Auxiliary and semi-rapid burner: after

you assembly the injectors (

3

in

following figure), screw their cages

(diameter 10 mm,

1

in following figure)

on, included in the supply (primary air

regulators) ;

• Rapid burner: after assembly the

injectors (

3

in following figure), screw

their cages (diameter 16 mm,

2

in

following figure) on, included in the

supply (primary air regulators) ;

ENGLISH

17

1

2

4

3

Caution! In both cases use the

special cap tool

4

and a

screwdriver to secure the cages.

Caution! Be sure to remove the

cap tool before reassembling the

burners.

Adjusting flame level

When hob has been fully installed, it is

necessary to check the minimum flame

setting:

1. Turn the gas tap to the maximum

position and ignite.

2. Set the gas tap to the minimum flame

position then turn the control knob from

minimum to maximum several times. If

the flame is unstable or extinguished,

follow the procedure further.

3. Re-ignite the burner and set to

minimum.

4. Remove the control knob.

5. To adjust, use a thin bladed screwdriver

and turn the adjustment screw until the

flame is steady and does not extinguish,

when the knob is turned from minimum

to maximum, and vice versa (see

following picture).

6. Repeat this procedure for all burners.

7. Reassemble the knobs.

Warning! If the appliance is

connected to liquid gas (G31

propane or G30 butane), the

regulation screw must be

fastened as tightly as possible.

Gas setting conversion for Hungary

This appliance has the gas

settings not applicable for

Hungary. If you install this

appliance in Hungary you must

change the gas settings.

Warning! Conversion or

replacement can only be

performed by a registered

installer.

To replace injectors:

1. Remove pan support.

2. Remove burner cap and crown.

3. With a socket spanner 7 unscrew and

remove the injectors, replace them with

ENGLISH

18

the ones required for the type of gas in

use.

4. Reassemble the parts, following the

same procedure backwards.

To adjust the minimum level of the burners:

1. Light the burner.

2. Turn the knob on the minimum position.

3. Remove the knob.

4. With a thin screwdriver, adjust the

bypass screw position.

• For G20 (2H) 25 mbar turn the

bypass screw 1/2 of a turn

clockwise.

• For G30/G31 (3B/P) 30/30 mbar

tighten the bypass screw fully and

undo approximately 1/2 of a turn.

• For G25.1 (2HS) 25 mbar tighten the

bypass screw fully and undo

approximately 1/4 of a turn.

Warning! Make sure the flame

does not go out when you quickly

turn the knob from the maximum

position to the minimum position.

IKEA GUARANTEE

How long is the IKEA guarantee valid?

This guarantee is valid for five (5) years

from the original date of purchase of Your

appliance at IKEA, unless the appliance is

named LAGAN in which case two (2) years

of guarantee apply. The original sales

receipt is required as proof of purchase. If

service work is carried out under guarantee,

this will not extend the guarantee period for

the appliance,

Which appliances are not covered by the

IKEA five (5) years guarantee?

The range of appliances named LAGAN

and all appliances purchased in IKEA

before 1st of August 2007

Who will execute the service?

IKEA service provider will provide the

service through its own service operations

or authorized service partner network.

What does this guarantee cover?

The guarantee covers faults of the

appliance, which have been caused by

faulty construction or material faults from

the date of purchase from IKEA. This

guarantee applies to domestic use only. The

exceptions are specified under the headline

“What is not covered under this

guarantee?” Within the guarantee period,

the costs to remedy the fault e.g. repairs,

parts, labour and travel will be covered,

provided that the appliance is accessible

for repair without special expenditure. On

these conditions the EU guidelines (Nr.

99/44/EG) and the respective local

regulations are applicable. Replaced parts

become the property of IKEA.

What will IKEA do to correct the problem?

IKEA appointed service provider will

examine the product and decide, at its sole

discretion, if it is covered under this

guarantee. If considered covered, IKEA

ENGLISH 19

service provider or its authorized service

partner through its own service operations,

will then, at its sole discretion, either repair

the defective product or replace it with the

same or a comparable product.

What is not covered under this

guarantee?

• Normal wear and tear.

• Deliberate or negligent damage,

damage caused by failure to observe

operating instructions, incorrect

installation or by connection to the

wrong voltage, damage caused by

chemical or electro-chemical reaction,

rust, corrosion or water damage

including but not limited to damage

caused by excessive lime in the water

supply, damage caused by abnormal

environmental conditions.

• Consumable parts including batteries

and lamps.

• Non-functional and decorative parts

which do not affect normal use of the

appliance, including any scratches and

possible color differences.

• Accidental damage caused by foreign

objects or substances and cleaning or

unblocking of filters, drainage systems or

soap drawers.

• Damage to the following parts: ceramic

glass, accessories, crockery and cutlery

baskets, feed and drainage pipes, seals,

lamps and lamp covers, screens, knobs,

casings and parts of casings. Unless such

damages can be proved to have been

caused by production faults.

• Cases where no fault could be found

during a technician’s visit.

• Repairs not carried out by our appointed

service providers and/or an authorized

service contractual partner or where

non-original parts have been used.

• Repairs caused by installation which is

faulty or not according to specification.

• The use of the appliance in a non-

domestic environment i.e. professional

use.

• Transportation damages. If a customer

transports the product to their home or

other address, IKEA is not liable for any

damage that may occur during transport.

However, if IKEA delivers the product to

the customer's delivery address, then

damage to the product that occurs

during this delivery will be covered by

this guarantee.

• Cost for carrying out the initial

installation of the IKEA appliance.

However, if an IKEA service provider or

its authorized service partner repairs or

replaces the appliance under the terms

of this guarantee, the service provider or

its authorized service partner will re-

install the repaired appliance or install

the replacement, if necessary.

This restriction do not apply to fault-free

work carried out by a qualified specialist

using our original parts in order to adapt

the appliance to the technical safety

specifications of another EU country.

How country law applies

The IKEA guarantee gives You specific legal

rights, which covers or exceed local

demands. However these conditions do not

limit in any way consumer rights described

in the local legislation

Area of validity

For appliances which are purchased in one

EU country and taken to another EU

country, the services will be provided in the

framework of the guarantee conditions

normal in the new country. An obligation to

carry out services in the framework of the

guarantee exists only if the appliance

complies and is installed in accordance

with:

• the technical specifications of the country

in which the guarantee claim is made;

• the Assembly Instructions and User

Manual Safety Information;

ENGLISH

20

Strona jest ładowana ...

IKEA LHGA4K Instrukcja obsługi

IKEA LHGA4K Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty