Philips 20PFL5122/58 Instrukcja obsługi

English

Français

Magyar

Pyccкий

Polski

Česky

Slovenský

Türkçe

Country Number Tariff

Austria 0810 000205 €0.07/min

Belgium 078250145 €0.06/min

Czech Rep 800142840 free

Denmark 3525 8759 local

Finland 09 2311 3415 local

France 0821 611655 €0.09/min

Germany 0900 1101211 €0.10/min

Greece 0 0800 3122 1280 free

Hungary 0680018189 free

Ireland 01 601 1777 local

Italy 840320086 €0.08/min

Luxemburg 40 6661 5644 local

Netherlands 0900 8407 €0.10/min

Norway 2270 8111 local

Poland 0223491504 local

Portugal 2 1359 1442 local

Slovakia 0800004537 free

Spain 902 888 784 €0.10/min

Sweden 08 5792 9100 local

Switzerland 0844 800 544 local

UK 0845 601 0354 local

This information is correct at the time of press.

For updated information, see www.support.philips.com

www.philips.com/support

Model

Serial

Important

This apparatus is fitted with an approved

moulded 13AMP plug. Should it become

necessary to replace the mains fuse, this

must be replaced with a fuse of the same

value as indicated on the plug.

1 Remove fuse cover and fuse.

2 The replacement fuse must comply with BS

1362 and have the ASTA approval mark.

If the fuse is lost, make contact with your

retailer in order to verify the correct type.

3 Refit the fuse cover.

If for any reason the fitted plug is not suitable

for your socket outlet, please consult your

retailer or a qualified electrician before

proceeding with the installation.

Connecting the aerial

The aerial should be connected to the socket

marked : at the back of the set. An inferior

aerial is likely to result in a poor, perhaps

unstable picture with ghost images and lack

of contrast. Make-shift loft or set-top aerials

are often inadequate.Your dealer will know

from experience the most suitable type for

your locality. Should you wish to use the set

in conjunction with other equipment, which

connects to the aerial socket such as TV games,

or a video camera it is recommended that these

be connected via a combiner unit to avoid

repeated connection and disconnection of the

aerial plug.

Fitting the stand (if provided)

Use only the stand provided with the set, making

sure that the fixings are properly tightened. A

diagram showing how to assemble the stand is

packed with the stand. Never use a make-shift

stand, or legs fixed with woodscrews.

Positioning the TV

For the best results, choose a position where

light does not fall directly on the screen, and

at some distance away from radiators or other

sources of heat. Leave a space of at least 5 cm all

around the TV for ventilation, making sure that

curtains, cupboards etc. cannot obstruct the air

flow through the ventilation apertures.The TV

is intended for use in a domestic environment

only and should never be operated or stored in

excessively hot or humid atmospheres.

General Points

Please take note of the section entitled ‘Tips’ at

the end of this booklet.

Interference

The Department of Trade and Industry operates

a Radio Interference Investigation Service to help

TV licence holders improve reception of BBC

and IBA programmes where they are being spoilt

by interference. If your dealer cannot help, ask

at a main Post Office for the booklet “How to

Improve Television and Radio Reception”.

Mains connection

Before connecting the TV to the mains, check

that the mains supply voltage corresponds to

the voltage printed on the type plate on the rear

panel of the TV. If the mains voltage is different,

consult your dealer.

Information for users in the UK

(not applicable outside the UK)

2

English

Product information

• This TV consumes minimal energy in

standby mode to minimise environmental

impact

• Standby Power Consumption for this set is less

than 2 W.

• Power Consumption of the set can found on

the type plate at the rear of the TV.

• For more specifications of the product see the

product leaflet on www.philips.com/support.

Note

Specifications and information are

subject to change without notice.

• If you need further assistance, please call

the customer support service in your

country. The corresponding telephone

numbers and addresses are given in the

supplied Worldwide guarantee booklet.

Recycling

The packaging of this product is intended to be

recycled. Apply to the local authorities for

correct disposal.

Disposal of your old product

Your product is designed and manufactured with

highly quality material and components, which

can be recycled and reused. When this crossed-

out wheeled bin symbol is attached to a product,

it means the product is covered by the European

Directive 2002/96/EC.

Please inform yourself about the local separate

collection system for electrical and electronic

products. Please act according to your local rules

and do not dispose your old products with your

normal household waste. The correct disposal

of your old product will help prevent potential

negative consequences for the environment and

human health.

Disposal of batteries

The batteries supplied do not contain the heavy

metals mercury and cadmium. Please check on

how to dispose exhausted batteries according to

local regulations.

Rear of TV

1

English

Thank you for purchasing this television set.

This handbook has been designed to help you install and operate your TV set.

We strongly recommend that you read it thoroughly.

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Preparation / Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Television keys and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Remote Control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Quick installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Programme sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Auto store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Manual store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Naming channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Picture and sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using the Contrast+ and Sleeptimer features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Using the smart picture and sound features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Screen formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using the TV as a PC monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Using the TV in High Definition (HD) mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using the TV as an FM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using the FM radio sound features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting peripheral equipment

Connecting a DVD recorder or VCR recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connecting HD equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Connecting other equipment (satellite, decoder, game console, etc . . . . . . . . . . . . . . . . . . . . . 19

Connecting a camera, camcorder or headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Troubleshooting tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Introduction

2

English

Safety Information

Do not expose the TV or the batteries

of the remote control to heat, direct sunlight,

rain or water.

Do not connect too much equipment to the

same mains socket because it can result in fire

or electric shock.

X

Pull the power lead by the plug. Do not pull on

the power lead. Do not use a poor fitting mains

socket. Insert the plug fully into the mains. If it is

loose, it may cause arching and result in fire.

When cleaning the surface or the screen of

the set, wipe gently with absorbent cotton or

cloth or other soft material like chamois. Do

not use a cloth which is dripping with water.

Do not use acetone, toulene or alcohol to

clean the TV. As a safety precaution, unplug

the power cord from the mains.

As a safety precaution, do not touch any part

of the TV, power lead or aerial lead during

lightning storms.

•

X

To connect to the mains, insert the appliance

coupler into the mains socket at the back of the

TV and the plug into the wall socket.

To disconnect from the mains, remove the

appliance coupler from the mains socket at the

back of the TV or remove the plug from the wall

socket.

The appliance coupler or the mains cord on the

TV is used as the disconnect device.

Philips Royal Electronics manufactures and

sells many products targeted at consumers,

which, like any electronic apparatus, in

general have the ability to emit and receive

electro magnetic signals.

One of Philips’ leading Business Principles

is to take all necessary health and safety

measures for our products, to comply with

all applicable legal requirements and to stay

well within the EMF standards applicable at

the time of producing the products.

•

• Philips is committed to develop, produce

and market products that cause no adverse

health effects.

• Philips confirms that if its products are

handled properly for their intended use,

they are safe to use according to scientific

evidence available today.

• Philips plays an active role in the

development of international EMF and safety

standards, enabling Philips to anticipate

further developments in standardisation for

early integration in its products.

Electric, Magnetic and Electromagnetic Fields (“EMF”)

X

Do not place naked flame sources such as

lighted candles close to the TV set.

Do not place a vase filled with water near

the TV. Spilling water into the TV can result

in electric shock. Do not operate the TV

if water is spilled into the set. Unplug the

power cord from the mains immediately and

have the set checked by a qualified technician.

•

X

3

English

Using the Remote Control

• Insert the 2 batteries supplied. Ensure that

the (+) and (-) ends of the batteries line up

correctly (inside of case is marked.)

Switching on the TV set

• To switch on the TV set, press the POWER

button. A green indicator comes on and the

screen lights up.

• If the TV set remains in standby mode (red

indicator), press the P – / + button on the

remote control.

NOTE: Do not leave the TV in standby mode

for an extended period of time. Instead,

disconnect the TV from the mains.

Positioning the TV set

• If you place the TV set on a surface, ensure

the surface is level and that it can withstand

the weight of the TV.

• Before you hang your TV on a wall, ensure

the wall is suitable to carry the weight of

the TV. Installation of the TV set on the wall

should be carried out by qualified person.

Improper installation can cause the TV to be

unsafe.

The connections do not have to be made

before hanging the TV, but the cables must

be inserted into connectors of the TV.

• Wherever you place or hang the TV, ensure

that air can circulate freely through the

ventilation slots. Do not position the TV in a

confined space.

Connections

If you do not have a cable box or satellite box,

follow these instructions:

• Insert the aerial plug into the : socket at

the bottom of the set.

• Insert the mains plug into a wall socket

(220-240V 50/60Hz).

If you are using a cable box or satellite box see

“Connecting peripheral equipment” on page 16

to 19.

•

2

3

1

Preparation / Getting started

4

1

5

P

F

5

1

21

2

0

P

F

5

1

2

1

2

3

P

F

5

3

2

1

2

3 4

Do not remove the protective sheet until you have completed the stand/wallmounting and

connections.

Please handle with care. Use a soft cloth provided to clean the glossy black front of the TV.

The power consumption of the set is given

on the type plate at the rear of the TV.

Warning: Verify that the mains supply voltage

in your home corresponds to the voltage printed

on the sticker at the rear of the TV.

If the TV is mounted on a swivel base or swivel

arm, ensure no strain is placed on the power

cord when the TV is swivelled. Strain on the

power cord can loosen connections. This may

cause arcing and result in fire.

•

4

English

Television keys and connectors

POWER : to switch the TV on or off.

Note : The power remains on even when the

POWER switch is turned off.

PROGRAM – / + : to select programmes.

MENU : to access or close menus. The

PROGRAM – / + keys can be used to select

a menu item and the VOLUME – / + keys

to enter into the selected menu item and

make adjustments.

VOLUME – / +: to adjust sound level.

POWER socket :

Insert the mains plug into a

wall socket.

TV Aerial socket :

Insert the aerial plug into

the TV Antenna socket.

1

2

3

4

5

6

8

FM Aerial socket :

Insert the radio aerial lead

into the FM Antenna socket.

For Service use only.

EXT1 socket : for connecting to devices like

DVD, VCR, recorder, decoder or games

console.

DVI-I (HD / PC) : for connecting a High

Definition (HD) equipment or computer with

DVI/VGA output.

Side connections (AV/SVHS) : for

connecting to devices like camera or

camcorder. Also allows you to connect your

headphone for your personal listening pleasure.

9

7

10

11

2 3 4

1

5

11

EXT1

DVI-I

(HD/PC)

FM

ANT

TV

:

75Ω

6

7 8 9

10

VIDEO

IN

S-VIDEO

DVI

AUDIO

IN

AUDIO

IN

R

L

For more information about connections,

see page 16 to 19.

5

English

Standby

To set the TV to standby mode. To switch the

TV set on again, press , to ,

P – / + (PROGRAM – / +) or AV key.

Sleeptimer

To select a time period before the set switches

to standby mode automatically (see page 9).

AV

To display the Source List to select TV or

peripheral equipment connected to EXT1,

AV/SVHS, PC, HD or FM Radio.

Teletext keys (see page 11)

Screen Format (see page 10).

MENU

To call up or exit the TV menus.

Cursors

To select and adjust the menu items.

Volume ( – VOL + )

To adjust the sound level.

Smart Picture / Sound

To access a series of predefined picture and

sound setting (see page 9).

Screen information

To display/remove the programme number,

the sound mode and the remaining time of the

sleeptimer.

Sound mode

To force programmes in Stereo and

Nicam Stereo to Mono or, for bilingual

programmes, to choose between Dual å or

Dual ». The Mono indication is red when in

forced position.

Programme List

To display / exit the list of programmes. Use the

Î ï keys to select a programme and the

Æ

key to display it.

Teletext key (see page 11).

Surround mode

To activate / deactivate the surround sound

effect. In stereo, this gives the impression that the

speakers are further apart.

Mute

Mute or restore sound.

Selecting TV programmes

( – P + )

To select the next or previous programme.

The number and the sound mode are

displayed for a few seconds.

For some TV programmes, the title of the programme

appears at the bottom of the screen.

/ Numerical keys

To access programmes directly. For a 2 digit

programme number, the 2

nd

digit must be

entered before the dash disappears.

Previous/Present programme

To alternate between the last viewed and

present programme.

Remote Control keys

1

2

3

4

6

7

8

9

10

11

13

14

15

16

17

5

12

3

2

1

4

5

6

7

8

9

10

11

12

13

15

14

16

18

17

18

6

English

The search starts automatically. All the

available TV programmes are stored. This

operation takes a few minutes. The display

shows the progress of the search and the

number of programmes found.

Important : To exit or interrupt the search

before it is completed, press the H key.

If you interrupt search during auto store, not

all channels are stored. For all channels to

be stored, you need to do a complete auto

store search again.

Note

ATS (Automatic Tuning System) feature

If the transmitter or cable network sends the

automatic sort signal, the programmes are

numbered correctly. In this case, the installation

is complete. If this is not the case, you can use

the Sort menu to number the programmes

correctly.

ACI (Automatic Channel Installation)

feature

If a cable system or a TV channel which

broadcasts ACI is detected, a programme

list appears. Without ACI broadcast, the channels

are numbered according to your language and

country selection. You can use the Sort menu to

re-number them.

Some transmitters or cable networks broadcast their

own sort parameters (region, language, etc.). In this

case, indicate your choice using the Î ï keys and

confirm with Æ key.

Programme Sort

Press the H key. The TV Menu is

displayed on the screen.

Use the ï key, select the Install menu

and the Æ key to enter the Install menu.

Use the ï key to select Sort and the Æ key

to enter sort mode.

Select the programme number you want to

move by using the Î ï keys and the Æ key

to enter sorting mode. (The arrow cursor

now points to the left.)

Use the Î ï keys to select the new

programme number and confirm with the Í

key. (The arrow points to the right and

sorting is completed.)

Repeat steps and for each

programme number you wish to re-number.

To exit the menu, press the

Ë key.

1

4

5

4

3

5

6

2

7

Plug’n’Play

Country

Í GB Æ

Language

English

TV Menu

Picture

Sound

Features

Install

Language

Country

Auto Store

Manual Store

Sort

Name

Æ • 0

Æ • 1

Æ • 2

Æ • 3 Æ

Æ • 4

Æ • 5

Quick Installation

When you switch on the TV set for the

first time, a menu is displayed on screen.

This menu prompts you to select the

country and language for the menus.

Note

If the above menu is not displayed, proceed to

do the installation of channels by the

Auto Store method (see page 7). If the

above menu is displayed, proceed to do the

following steps.

& Use the Î ï keys on the remote control

to select your country. If your country does

not appear in the list, select “. . . “ . Refer to

the “Reference table of Countries available for

selection” on page 22.

é Use the Æ key to move to the Language

mode and select your language with the Î ï

keys.

“ Use the Æ key to start search.

7

English

This menu is used to store the programmes

one at a time.

Press the

H key.

With the ï key, select Install and the Æ

key to enter the Install menu.

Use the ï key to select Manual Store and

the Æ key to enter Manual Store menu.

Use the Î ï keys to select the items in the

Manual Store menu to adjust or activate.

System : Use the Í Æ keys to select either

– Europe (automatic detection*),

– France (LL’ standard),

– UK (I standard),

– West Europe (BG standard),

– East Europe (DK standard). or

* Except for France (LL’ standard), you must

select France.

Manual Store

1

3

4

2

5

6

7

8

9

10

11

Auto Store

Press the H key.

Using the ï key, select Install and the Æ

key to enter the Install menu (Language

is highligted).

Before you proceed to auto store channels,

select your desired menu *Language with

the Í Æ keys.

Select Country with the ï key and

use the Í Æ keys to select the country

of your choice.

Using the ï key, select Auto Store. Use

the Æ key to start automatic searching for

channels. All the available TV programmes

are stored. This operation takes a few

minutes. The display shows the progress of

the search and the number of programmes

found. To exit or interrupt the search, press

the H key.

1

2

3

5

4

6

Install

Language

Country

Auto Store

Manual Store

Sort

Name

Í English Æ

Æ

TV Menu

Picture

Sound

Features

Install

TV Menu

Picture

Sound

Features

Install

Manual Store

System

Search

Program No.

Fine Tune

Store

Europe

Æ

To exit the menu, press the Ë key.

NOTE : If you interrupt search during

auto store, not all channels are stored. For

all channels to be stored, you must do a

complete auto store search again.

* Selecting the language

If you have selected the wrong language to

operate the set, take the following steps to bring

you back to your preferred language :

– Press the Ë key to exit the existing

menu.

– Press the

H key to enter the TV menu.

– Press the ï key repeatedly until the

FOURTH item in the TV menu is

highlighted.

– Press the Æ key to go into the Install menu

– Press the Í Æ keys to select your

preferred language (the menu will now

appear in the chosen language). You can

proceed to install the TV channels

automatically.

Search :

Press the Æ key. The search starts. Once a

programme is found, the scanning stops and

its name is displayed (if available). Go to the

next step. If you know the frequency of the

required programme, you can enter it

directly by using the to keys.

If no picture is found, see “Troubleshooting Tips

on page 20-21.

Program No. :

Enter the required number by using the

to or Í Æ keys.

Fine Tune :

If the reception is not satisfactory, adjust it

by using the Í Æ keys.

Store :

To store the changes, press the Æ key . The

programme is now stored.

Repeat steps to for each programme

to be stored.

To exit the menu, press the

Ë key.

6

9

8

English

Naming Channels

This menu is used to name channels.

Press the

H key.

With the ï key, select Install. Use the Æ

key to enter the Install menu.

1

3

4

2

Use the ï key to select Name. Use

the Æ key to enter name mode.

Use the Î ï keys to select the programme

you want to name. Use the Æ key to

enter naming mode.

Use the Î ï keys to select the characters

(maximum of 5 characters). Use the Í Æ

keys to move around the name display area.

Press Æ key until the name appears at the

top right hand corner of the TV screen. The

name is now stored.

5

6

Picture and Sound Settings

Description of the Picture settings

Brightness : this changes picture brilliance.

Colour : this changes the intensity of the colour.

Contrast : this changes the difference between

the light and dark tones.

Sharpness : this increases or decreases the

sharpness level to improve details in the picture.

Colour Temp. : this changes the colour

rendering: Cold (bluer), Normal (balanced) or

Warm (redder).

Store : to store the picture adjustments and

settings.

Press the H key.

Use the Î ï keys to select Picture or

Sound.

Use the Í Æ keys to enter the Picture or

Sound menu.

Use the Î ï keys to select a Picture or

Sound setting. Use the Í Æ keys to adjust

the settings.

To quit the menu, press the

Ë key.

1

2

3

4

TV Menu

Picture

Sound

Features

Install

Picture

Brightness

Colour

Contrast

Sharpness

Colour Temp.

Store

39

TV Menu

Picture

Sound

Features

Install

Sound

• 100 Hz

• 300 Hz

• 1000 Hz

• 3000 Hz

• 8000 Hz

Equalizer Æ

Balance Æ

Delta Volume Æ

AVL Æ

Incr. Surround Æ

Store Æ

5

TV Menu

Picture

Sound

Features

Install

Language

Country

Auto Store

Manual Store

Sort

Name

8

Æ

Description of the Sound settings

Equalizer : to adjust the sound tone (from bass:

100 Hz to treble : 8000 Hz).

Balance : this balances the sound on the left and

right speakers.

Delta Volume : this is used to compensate for

any volume differences between the different

programmes or EXT sockets. Note : Programmes

0 to 40 have individual volume setting.

Programmes 41 and above share common setting.

AVL (Automatic Volume Leveller) : this is used

to limit sudden increases in sound, especially on

programme change or advertising slots.

Incr. Surround : select between Incredible

Surround and Stereo when in stereo transmission.

Select between Mono and Spatial when in mono

transmission .

You can also access these settings by using the

f

key.

Store : this is used to store the sound settings.

9

English

Press the H key.

Use the ï key, select Features. Use the

Æ key to enter the Features menu.

Use the Î ï keys to select a Feature

setting. Use the Í Æ keys to select an

option or setting.

To quit the menu, press the

Ë key.

Definition of the feature settings

Contrast+ :

– optimise the total contrast of the picture for

improved picture visibility.

– select On option to activate feature.

Using the Contrast+ and Sleeptimer Features

Sleep :

– select a *time period at which you want the

set to switch to standby mode automatically.

– select Off option to deactivate feature.

*time period

• 15, 30, 45 or 60 minutes.

• 90 or 120 minutes.

• 180 or 240 minutes

NOTE : During the last minute of a Sleep time

setting, an on-screen countdown will be displayed.

Pressing any button on the remote control cancels

the Sleep feature.

1

3

4

2

Using the Smart Picture and Sound Features

The Smart Picture feature offers you the

following picture settings : Rich, Natural, Soft,

Multimedia, and Personal.

Press the button repeatedly to select your

desired mode.

The Smart Sound feature offers you the

following sound settings : Theatre, Music,

Voice, and Personal.

Press the button repeatedly to cycle

through the settings to select your desired mode.

Rich

or

Personal

Multimedia

Natural

Soft

Theatre

or

Music

Voice

Personal

Definition of Picture Settings

Rich : Brilliant and sharp picture settings

suitable for bright environment and

for use in demonstrations to show

off the quality of the TV on good

sources.

Natural : Reference mode for living room

conditions and average signals.

Soft. : Intended for bad-quality signals.

Suitable for living room viewing.

Multimedia : Best for graphical applications.

Personal : Pictures settings are set to your

preference.

Definition of Sound Settings

Theatre : Emphasize sensation to action (Bass

and Treble boosted).

Music : Emphasize low tone (Bass boosted).

Voice :

Emphasize high tone (Treble boosted).

Personal : Sound settings are set to your

preference.

NOTE : The Personal setting is configured by

using the Picture/Sound menu in the main menu.

This is the only setting in the Smart Picture/Sound

settings that can be changed. All other settings

are pre-set at the factory.

10

English

Screen Formats

The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional

screen). 4:3 pictures sometimes have a black band at the left and right of the screen. This function

allows you to optimise the picture display on screen.

4:3

This format is recommended if you want to display the 4:3 picture using the full

surface of the screen.

Expand 4:3

When this format is selected, the picture is vertically expanded, thus reducing the

horizontal black bars.

Compress 16:9

The format is recommended if you want to compress full screen movie images

into letterbox format. When this format is selected, black horizontal bars can be

seen at the top and bottom of the TV screen.

If your television is a 4:3 screen

Press the

ë key (or Î ï) to select the different modes.

If your television is a wide screen

Press the

ë key (or Í Æ) to select the different modes. This TV set is also equipped with

automatic switching which will select the correct screen format, provided that the specific signals are

transmitted with the programmes.

4:3

The picture is reproduced in 4:3 format and a black band is displayed on either

side of the picture.

Zoom 14:9

The picture is enlarged to 14:9 format, a thin black band remains on both sides of

the picture.

Zoom 16:9

The picture is enlarged to 16:9 format. This mode is recommended when

displaying pictures which have black bands at the top and bottom (letterbox

format).

Subtitle Zoom

This mode is used to display 4:3 pictures using the full surface of the screen

leaving the sub-titles visible.

Superwide

This mode is used to display 4:3 pictures using the full surface of the screen by

enlarging the sides of the picture.

Widescreen

This mode displays images in full screen.

11

English

Teletext

Teletext is an information system that is broadcast by certain channels. Teletext can be consulted like

a newspaper. Teletext also offers access to subtitles for viewers with hearing problems or who are not

familiar with the transmission language.

Press the button once to switch on the teletext display.

The

summary appears with a list of items that can be

accessed. Select a channel in which teletext is transmitted.

Press the button a second time to superimpose the

teletext page over the TV programme. Press the button a

third time to exit teletext mode.

Enter the number of the page required by using the 0 to

9 keys or P – / + keys. For example, to access page 120,

enter 120. The number is displayed at the top left corner

of the screen. When the page is located, the counter stops

searching. Repeat this operation to view another page. If

the counter continues to search, this means that the page

is not transmitted. Select another number.

Coloured areas are displayed at the bottom of the

screen. The 4 colour keys are used to access the items or

corresponding pages. The coloured areas flash when the

item or the page is not yet available.

To return you to the contents page (usually page 100).

Certain pages contain sub-pages which are automatically

displayed successively. This key can also be used to stop or

resume sub-page display in teletext mode. The indication

appears on the top left side.

To activate or deactivate the double page teletext display

mode. The active page is displayed on the left and the

following page is displayed on the right. Press

ë to hold

a page (i.e. the contents page). The active page is then

displayed on the right. To return to normal mode, press

the

ê key. NOTE : Applicable to 16:9 sets only.

To display or hide the concealed information (games

solutions).

To allow you to display the top or bottom part of the

page. Pressing again will return the picture to normal size.

Instead of the standard coloured areas displayed at the

bottom of the screen, you can store 4 favourite pages on

the first 40 channels. Those can then be accessed by using

the coloured keys. Once set, these favourite pages will

become the default every time teletext is selected.

1 Press the H key to change to favourite pages

mode.

2 Use the keys to enter the teletext page

that you want to store as a favourite page.

3 Press the coloured keys of your choice for 3 seconds.

The page is now stored.

4 Repeat steps 3 to 4 with the other coloured keys.

5 To exit favourite page mode, press the H key.

6 To exit teletext mode, press the ¤ key twice.

Teletext On/Off

and Superimpose

teletext page over

TV programme

1

Selecting a page

2

Direct access to

the items

3

Contents

4

5

Stop or resume

sub-page display

Double page

teletext

6

7

Hidden

information

Enlarge a page

8

9

Favourite pages

1

8

5

3

7

6

2

4

6

9

12

English

Using the TV as a PC Monitor

Press the H key to display the PC menu.

Use the Î ï keys to access the settings.

Use the Í Æ keys to select or adjust the

setting. (The settings are automatically saved).

PC menu settings

• Picture :

– Brightness / Contrast: to adjust the

brightness and contrast.

– Horizontal / Vertical*: to adjust the

horizontal and vertical placing of the image.

– Colour Temp : this changes the colour

rendering : Cool (bluer), Normal (balance)

or Warm (redder).

• Audio Selection : to choose the sound

reproduced on the TV (TV, PC or FM).

• Features:

– Phase/Clock* : eliminates the horizontal

(Phase) and vertical (Clock) interfering lines.

– Format : For widescreen set, you can choose

between full screen or native format. For 4:3

set, only Native format is available.

– Auto Adjust* : Picture position and

Phase/Clock are set automatically.

• Reset To Factory Setting: to return to the

factory settings (default settings).

* These adjustments are only available when

connected to a computer with VGA output.

NOTE

• When using the TV as a PC monitor, slight diagonal interference lines may be observed when

it is operated under electromagnetic interference environment. This does not affect the

performance of the TV.

• For better performance, use a good quality DVI cable.

IMPORTANT

For the TV to function as PC monitor, the

following step must be taken :

The DVI-I input of your TV MUST be

connected to

the DVI output of the PC.

Device

with only VGA connector can be connected with

a VGA to DVI adaptor. For more information on

connection, see page 16.

Choosing PC mode

Press the key on the remote control

to display the Source List.

Use the Î ï key to select PC. Use the Æ

key to switch the TV to PC mode.

To return to TV mode, press the key,

select TV and confirm with the Æ key.

Using the PC menus

Supported PC display format

Æ

Source

TV

EXT1

AV / SVHS

PC

HD

FM Radio

Æ

Source

TV

EXT1

AV / SVHS

PC

HD

FM Radio

Analogue and

Digital PC mode

20’/51cm 23’/58cm

4:3 16:9

VGA WXGA

Resolution

1

640 x 350

√

X

2

640 x 480

√√

3

800 x 600

X

√

4

832 x 624

XX

5

1024 x 768

X

√

6

1280 x 768

X

√

√ Supported X Not Supported

13

English

HD Mode

The High Definition (HD) mode allows you

to enjoy clearer and sharper pictures through

the DVI-I input if you are using a HD receiver/

equipment that can transmit high definition

programming.

IMPORTANT

For the TV to function in HD mode, the

following steps must be taken :

& Connect the DVI output of your HD

receiver to the DVI-I In of the TV.

If your HD equipment has only a HDMI

connector, a DVI to HDMI cable is needed.

é Connect the Audio (Red and White)

outputs of the HD receiver to the

DVI Audio Inputs of the TV.

For more

information about connection, see page 18.

Choosing HD mode

Press the key on the remote control

to display the Source List.

Using the TV in High Definition (HD) Mode

Use the Î ï keys to select HD and the Æ

key to switch the TV to HD mode.

To return to TV mode, press the key,

select TV and confirm with the Æ key.

Using the HD menus

Press the H key to display the HD menu.

Use the Î ï keys to access the settings.

Use the Í Æ keys the to select or adjust

setting.

HD Install menu

NOTE : You cannot access Install in the HD

menu There is NO Install function in HD mode.

HD Picture and Sound settings

HD Picture and Sound settings are the same as

the TV Picture and Sound settings. For information

about HD Picture and Sound settings, see Picture

and Sound settings on page 8..

HD Features

• Sleep : Refer to “Using the Sleeptimer feature”

on page 9.

• Horizontal Shift : to adjust the horizontal

position of the image.

Supported HD display format

Æ

Source

TV

EXT1

AV / SVHS

PC

HD

FM Radio

Source

TV

EXT1

AV / SVHS

PC

HD

FM Radio

Æ

Analogue and

Digital HD mode

20’/51cm 23’/58cm

4:3 16:9

VGA WXGA

Signal Format Analogue Digital Analogue Digital

1

SDTV 480i

√

X

√

X

2

SDTV 576i

√

X

√

X

3

EDTV 480p

√√√√

4

EDTV 576p

√√√√

5

HDTV 720p

√

X

√√

6

HDTV 1080i

XX

√√

√ Supported X Not Supported

14

English

Your TV can be used as an FM Radio.

IMPORTANT

For the TV to function as a FM Radio, the

following steps must be taken :

& Connect the Radio aerial lead to the FM

Antenna at the rear of the TV.

é Press the key on the remote control

to display the Source List.

“ Use the Î ï keys to select FM Radio. Use

the Æ

key to switch the TV to FM Radio

mode.

‘ To return to TV mode, press the key,

select TV and confirm with the Æ key.

Using the FM Radio menus

Press the H key to display the FM

Radio menu.

Use the Î ï keys to access the settings

and the Í Æ keys to select or adjust the

settings.

Using the TV as an FM Radio

Æ

Source

TV

EXT1

AV / SVHS

PC

HD

FM Radio

Æ

Source

TV

EXT1

AV / SVHS

PC

HD

FM Radio

EXT1

DVI-I

(HD/PC)

FM

ANT

TV

:

75Ω

Install

Language

Country

Auto Store

Manual Store

Sort

Name

Í English Æ

Æ

Radio Menu

Picture

Sound

Features

Install

NOTE : You cannot access the Picture

setting in the FM Radio menu There is

NO Picture function in FM Radio menu.

FM Radio

menu settings

• Install

– Language : Select your preferred on-screen

menu language.

* Selecting the language

If you have selected the wrong language and do

not understand the language to operate the set,

take the following steps to bring you back to your

preferred language.

– Auto Store : Install the FM Radio stations

automatically (complete search).

NOTE : If you interrupt search during

auto store, not all channels will be stored.

For all FM Radio channels to be stored,

you need to do a complete auto store

search again.

– Manual Store : Install the FM Radio stations

manually (station by station search). Select

Programme No. with the ï key. Enter your

preferred programme number with the Í Æ

keys.

To ensure the installation is activated, select

Store and press the Æ key . The FM Radio

channel is now stored.

– Sort : This feature works in exactly the same

way as the TV Sort function (see page 6).

– Name : This feature works in exactly the

same way as the TV Name function (see page

8).

NOTE : You cannot access the Country

setting in the FM Radio menu. There is no

Country function in FM Radio Install menu.

Strona jest ładowana ...

Philips 20PFL5122/58 Instrukcja obsługi

Philips 20PFL5122/58 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty