Logicbus NSM-316G Instrukcja obsługi

Marka: Logicbus

Model: NSM-316G

Kategoria: Przełączniki sieciowe

Typ: Instrukcja obsługi

NSM-316G User’s Manual (Version 1.10, Sep/2019) --------------- 1

NSM-316G User’s Manual

16-PORT GBE Ethernet Unmanaged Switch

The NSM-316G is 16-port unmanaged full Gigabit Ethernet switch, Energy

Efficient Ethernet™ (EEE) , Port’s loss link Break Alarm, Power loss Alarm.

Features:

 Full Gigabit Ethernet ports

 Nonblocking architecture, line rate for all packet sizes

 Fully integrated packet buffer

 DIP switch alarm setting for Port’s break

 Power loss alarm

 Supports 9216 Byte jumbo frames

 Supports Auto Negotiation and Auto MDI/MDI-X

 Supports Dual +12 ~ 48 VDC power input and 1 relay output

 Supports operating temperatures from – 40 ~ +75°C

 DIN-Rail, Wall Mounting (optional)

Specifications:

Technology

Standards

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3x for Flow Control

Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle

network activity

Processing Type Store & forward, wire speed switching

MAC Addresses 8K

Packet buffer memory 512KByte

Jumbo Frames 9216 Byte

Flow Control IEEE802.3x flow control, back pressure flow control

NSM-316G User’s Manual (Version 1.10, Sep/2019) --------------- 2

Interface

RJ-45 Ports 10/100/1000 BaseT(X), 10/100BaseT(X) auto negotiation speed, full/half duplex mode,

and auto MDI/MDI-X connection

LED Indicators PWR1, PWR2, FAULT, Link, Act

Ethernet Isolation 1500 Vrms 1 minute

DIP Switch Ports loss link alarm mask

Console Port Debugging, Monitoring, Setting

Power Input

Redundant Input Range Flexible input +24/+48 VDC Nominal. ( +12 ~ +48 VDC)

Power Consumption 0.16A @ 48VDC Idle without loading; 0.2A @ 48VDC with full loading (0.12 W per ports)

0.31A @ 24VDC idle without loading; 0.39A @ 24VDC with full loading (0.12 W per ports)

Alarm Contact One relay output with current carrying capacity of 1A @ 30 VDC

Protection Power reverse polarity protection

Connector 6-Pin Removable Terminal Block (Power & Relay)

Mechanical

Chassis Metal with an IP30 ingress protection rating

Dimensions (W x L x H) 51 mm x 154 mm x 118 mm

Installation DIN-Rail or Wall Mounting (with optional kit)

Environmental

Operating Temperature -40 °C ~ + 75 °C (-40 °F to 167 °F)

Storage Temperature -40 °C ~ + 85 °C (-40 °F to 185 °F)

Ambient Relative Humidity 10 ~ 90% RH, non-condensing

Getting to know your NSM-316G Switch

Package Contents:

ꞏ NSM-316G

ꞏ DIN-Rail mounting (pre-installed on the unit)

ꞏ This manual

Note – optional wall mounting kits may be ordered

LED Indicator Functions:

LED Color Description

Ethernet Port

Green On Link to 10/100/1000 Mbps

Yellow On Act

PWR1 Green On This green LED is turned on when power is applied to the PWR1 input

PWR2 Yellow On This yellow LED is turned on when power is applied to the PWR2 input

Fault Red On Any of the alarm enabled Port have been loss link.

NSM-316G User’s Manual (Version 1.10, Sep/2019) --------------- 3

Pin Function for Terminal Block:

Pin Function Description

1 PWR1 Power1 input +12~+48VDC (V+)

2 P.GND Power Ground.

3 RL_COM Power Fault relay COM

4 RL_NO Power Fault relay NO

5 PWR2 Power2 input +12~+48VDC (V+)

6 P.GND Power Ground.

Redundant Power Input:

Both power inputs can be connected simultaneously to live DC power sources. If one power source

fails, the other live source will act as a backup, and automatically supplies all of NSM-316G power

needs.

External power supply is connected using the removable terminal block:

PWR (Power) : Power input (+12 ~ +48 VDC) and should be connected to the power supply (+)

GND: Ground and should be connected to the power supply (-)

Accessories(option):

DR-120-48 48 V/2.5 A, 120 W Single Output Industrial DIN Rail Power Supply

MDR-60-48 48 V/1.25 A, 60 W Single Output Industrial DIN Rail Power Supply

DR-120-24 24V/5 A, 120 W Single Output Industrial DIN Rail Power Supply

SDR-240-24 24 V/10 A, 240 W Single Output Industrial DIN Rail Power Supply with PFC

Function

DIP Switch Settings:

DIP Switch Setting Description

Port Alarm

Function

(P1 to P16)

Enables the PORT Alarm. When the port’s loss

link, the relay will forced an close circuit,

and the fault LED will light up.

OFF

Disable the PORT Alarm. When the port’s loss

link, there will no action from the relay, and it

remain in open circuit,

and the fault LED will not light up.

Console Port:

A RS-232 with RJ45 connecter, for debugging, monitoring and setting, the baud rate of this port is

9600,n,8,1.

Accessories(option):

CA-090510 9-pin Female D-sub & RJ-45 cable,1M

NSM-316G User’s Manual (Version 1.10, Sep/2019) --------------- 4

Dimensions (unit = mm):

Logicbus NSM-316G Instrukcja obsługi

Marka: Logicbus

Model: NSM-316G

Kategoria: Przełączniki sieciowe

Typ: Instrukcja obsługi

ściągnij PDF

raport

w innych językach

English: Logicbus NSM-316G User manual

Logicbus NSM-316G Instrukcja obsługi

Logicbus NSM-316G Instrukcja obsługi

w innych językach

Inne dokumenty