G
If a non-rewireable plug is cut off it
must be DESTROYED
I
MMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
i
nserted into a 13A socket outlet.
G
This appliance conforms to EC
d
irective 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
1 Wrap any excess cord around the
bracket on the underside of the
powerbase 햸.
2 Fill to ‘MAX’, boil, then pour the
water away. Repeat 2 to 3 times.
key
햲 spout
햳 hinged lid
햴 lid release latch
햵 water level windows
햶 on/off switch with indicator light
햷 360° powerbase
햸 cord wrap
햹 filter
to use your kettle
1 Fill the kettle through either the
spout or lid. To open the lid, pull
back the lid release latch 햴. The
water level must be between ‘MAX’
and ‘MIN’ (1 cup/200mls).
G
Be economical: do not boil more
water than you need.
G
To improve the quality of your drinks
always use fresh water.
G
Empty the kettle after each use.
2 Close the lid using the lid release
latch.
3 Plug in and switch on. The indicator
light will come on.
4 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
G
If you experience problems
with your kettle switching on
a
nd off during use or
switching off before boiling,
check that the flat element is
f
ree from scale - see
“descaling”.
G
Your kettle is fitted with a filter to
h
old back limescale particles.
G
If you find drops of water under your
kettle, don’t worry - it is just
condensation.
boil-dry protection
G
If you switch on with too little water,
your kettle will cut out automatically.
Switch off, remove from the
powerbase and let it cool down
before re-filling. When it has cooled
down, the switch will reset itself.
care and cleaning
G
Before cleaning, unplug your kettle
and let it cool down.
the outside and powerbase
G
Wipe with a damp cloth, then dry.
Do not use abrasives - they will
scratch the metal and plastic
surfaces.
the inside
G
Even though your kettle comes with
a filter, you still need to clean the
inside (and the filter) regularly.
the filter
1 Open the lid.
2 Slide the filter out .
3 either rinse under the tap or use a
soft brush.
or when descaling your kettle, drop
the filter in too. Rinse thoroughly.
4 Slide the filter back in to refit .
descaling
G
Regular descaling of the flat element
will improve the performance of your
kettle. If the kettle is not descaled
regularly the build up of limescale
may result in the following:
G
problems may be experienced
with the kettle switching on and
off during use or switching off
before boiling.
G
the kettle may take longer to boil.
G
the flat element may be damaged.
4