b
efore using for the first time
1 Wrap any excess cord around the
b
racket on the underside of the
p
owerbase 햶.
2 Fill to ‘MAX’, boil, then pour the
w
ater away. Repeat 2 to 3 times.
key
햲 flip top lid
햳 lid release button
햴 on/off switch with indicator light
햵 360° powerbase
햶 cord wrap
햷 water level windows
햸 filter
to use your kettle
1 Fill the kettle through either the
spout or lid. To open the lid, press
the lid release button. The water
level must be between ‘MAX’ and
1 cup (250mls).
l
Be economical: do not boil more
water than you need.
l
To improve the quality of your drinks
always use fresh water.
l
Empty the kettle after each use.
2 Check the lid is closed.
3 Plug in and switch on. The indicator
light will come on.
4 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
Note - To interrupt the boiling
ensure that the switch is in
the off position before
removing from the powerbase.
l
If you experience problems
with your kettle switching on
and off during use or
switching off before boiling,
check that the flat element is
free from scale - see
“descaling”.
l
Your kettle is fitted with a filter to
hold back limescale particles.
l
If you find drops of water under your
kettle, don’t worry - it is just
condensation.
b
oil-dry protection
l
If you switch on with too little water,
y
our kettle will cut out automatically.
S
witch off, remove from the
powerbase and let it cool down
b
efore re-filling. When it has cooled
d
own, the switch will reset itself.
care and cleaning
l
Before cleaning, unplug your kettle
and let it cool down.
the outside and powerbase
l
Wipe with a damp cloth, then dry.
Do not use abrasives - they will
scratch the plastic surfaces.
the inside
l
Even though your kettle comes with
a filter, you still need to clean the
inside (and the filter) regularly.
the filter
1 Open the lid. Press the lid release
button 햳.
2 Gently lift out the filter .
3 either rinse under the tap or use a
soft brush.
or when descaling your kettle, drop
the filter in too. Rinse thoroughly.
4 To re-fit the filter, slide it in until
secure .
5 Close and lock the lid by pressing
the lid down .
descaling
l
Regular descaling of the flat element
will improve the performance of your
kettle. If the kettle is not descaled
regularly the build up of limescale
may result in the following:
l
problems may be experienced
with the kettle switching on and
off during use or switching off
before boiling.
l
the kettle may take longer to boil.
l
the flat element may be damaged.
Please note: Failure to descale your
kettle may invalidate your guarantee.
4