EN 3
Revision 11/2022Copyright © 2022, Fast ČR,a.s.
Safety instructions
1. Safety instructions
To be able to use this product properly, read
this user's manual carefully and keep it for
future reference. If you plan to give (sell)
this device to a third person, include all
documentation, including this manual, with the
transaction.
The lightning symbol inside a triangle indicates
the device has dangerous voltage that may
cause electric shock.
The exclamation point symbol inside an
isosceles triangle indicates important operation
and repair instructions in the included device
documentation.
WARNING
RISK OF ELECTRIC SHOCK – DO
NOT OPEN!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK SIDE).
THERE ARE NO PARTS INSIDE THE DEVICE
REPLACEABLE BY THE USER. FOR REPAIRS,
CONTACT AND AUTHORIZED SERVICE
PROVIDER.
WARNING:
To prevent risk of fire or electric shock, do not
expose the device to rain or moisture. The
batteries must not be exposed to excessive
heat, for example sunlight, fire, etc.
This symbol indicates the device has
double insulation between dangerous
voltage from the network and user-
accessible parts. Replace parts with
identical spare parts only.
• Do not leave a static image on the LCD
panel for more than 2 hours. The panel
might get damaged.
• LCD screens are made using precision
technology to provide even the finest
image details. Several defective pixels can
appear on the screen from time to time,
indicated as red, blue, green or black dots
(up to 0.001% of the total pixel count
of the screen). This does not affect the
characteristics and the effectiveness of
your TV set.
Before use, please read the detailed safety
information in the full user manual available
on the website www.sencor.com
2. Installing the stand
Use the supplied or recommended screws to
attach the stand. Make sure the supports are
properly attached to keep the TV stable. Then
connect the TV to the power supply.
3. Inserting batteries
Open the battery compartment. Insert two AAA
batteries. Place the cover back on.
Insert two AA batteries into the Magic
controller (UHD models only).
Sencor SLE 32-43-50-55-65-US801TCSB QG EN CZ SK HU PL.indb 3Sencor SLE 32-43-50-55-65-US801TCSB QG EN CZ SK HU PL.indb 3 21.11.2022 10:14:3721.11.2022 10:14:37