Ferm JSM1033 Instrukcja obsługi

Kategoria
Elektronarzędzia
Typ
Instrukcja obsługi
POWERED BY
WWW.FERM.COM
JSM1033
20V CORDLESS
JIG SAW
EN
NL
FR
DE
PL
CS
SK
IT
ES
Original instructions 04
Vertaling van de oorspronkelijke gebruiksaanwijzing
10
Traduction de la notice originale 17
Übersetzung der Originalbetriebsanleitung 25
Tłumaczenie instrukcji oryginalnej 32
Překlad püvodního návodu k používání 39
Preklad pôvodného návodu na použitie 46
Traduzione delle istruzioni originali 52
Traducción del manual original 59
2
Fig. A
Fig. B
Fig. C
14
14
4
5
8
15
6
7
9
19
1 2 3
21
17
13
16
17
13
10
12
3
Fig. G
Fig. F
Fig. EFig. D
822
18
15
9
4
5
1
2
4
EN
JIG SAW
JSM1033
Thank you for buying this FERM product. By
doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings,
the additional safety warnings and
the instructions. Failure to follow the
safety warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the
safety warnings and the instructions for future
reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Variable electronic speed.
Wear safety goggles.
Wear hearing protection.
Wear a dust mask.
Do not dispose of the product in
unsuitable containers.
The product is in accordance with the
applicable safety standards in the
European directives.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING!
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference. The term “power tool” in the warnings
refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
5
EN
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the inuence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your nger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables better
control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause severe
injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger specied
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of re when used with another
battery pack.
6
EN
b) Use power tools only with specically
designated battery packs. Use of any other
battery packs may create a risk of injury and re.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a re.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, ush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modied. Damaged or modied
batteries may exhibit unpredictable behaviour
resulting in re, explosion or risk of injury.
f) Do not expose a battery pack or tool to
re or excessive temperature. Exposure to
re or temperature above 130 °C may cause
explosion. NOTE The temperature „130 °C“
can be replaced by the temperature „265 °F“.
g) Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specied in the
instructions. Charging improperly or at
temperatures outside the specied range may
damage the battery and increase the risk of re.
6) Service
a) Have your power tool serviced by a
qualied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
SAFETY WARNINGS FOR JIG SAWS
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live”
and could give the operator an electric shock.
Keep hands away from the sawing range.
Do not reach under the workpiece. Contact
with the saw blade can lead to injuries.
Apply the machine to the workpiece only
when switched on. Otherwise there is danger
of kickback when the cutting tool jams in the
workpiece.
Pay attention that the base plate rests
securely on the material while sawing.
A jammed saw blade can break or lead to
kickback.
When the cut is completed, switch off the
machine and then pull the saw blade out of
the cut only after it has come to a standstill.
In this manner you can avoid kickback and can
place down the machine securely.
Use only undamaged saw blades that are
in perfect condition. Bent or dull saw blades
can break, negatively influence the cut, or lead
to kickback.
Do not brake the saw blade to a stop by
applying side pressure after switching off.
The saw blade can be damaged, break or
cause kickback.
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage.
Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the workpiece by
hand or against your body leaves it unstable
and may lead to loss of control.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
2. MACHINE INFORMATION
Intended use
The machine is intended for sawing wood, metal,
plastics, ceramics, rubber, etc. to any required
size and in any required shape, while keeping
the baseplate resting firmly on the workpiece. A
suitable saw blade must always be used.
7
EN
Technical specifications
Model No. JSM1033
Voltage 20V DC
No load speed 0-2300/min
Saw stroke 18mm
Max. saw capacity wood 0° 80mm
Max. saw capacity steel 0° 6mm
Weight 1.85 kg
Sound pressure level LPA 87.8 dB(A), K=3dB(A)
Sound power level LWA 98.8 dB(A), K=3dB(A)
Vibration ‘sawing sheet metal’ 4.372 m/s
2
K=1.5 m/s
2
Vibration ‘sawing plywood’ 6.627 m/s
2
K=1.5 m/s
2
Only use the following batteries of the AX-POWER
20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CDA1158 20V, 1.5Ah Lithium-Ion
CDA1154 20V, 2Ah Lithium-Ion
CDA1155 20V, 4Ah Lithium-Ion
The following charger of the can be used to
charge these batteries.
CDA1156 Charger adapter
CDA1157 Quick charger
The batteries of the AX-POWER 20V battery
platform are interchangeable with all the FERM
AX-POWER battery platform tools.
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 62841; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned:
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Description
The numbers in the text refer to the diagrams on
page 2 and 3.
1. Lock-off button
2. On/off switch
3. Handle
4. Battery (not included)
5. Battery unlock button
6. Pendulum action switch
7. Scale for bevel angle
8. Vacuum cleaner adapter
9. Baseplate
10. Guide roller
12. Guard
13. Clamping lever
14. Bolts for parallel guide
15. Hex key
16. Chuck
17. Saw blade
18. Bolt for baseplate
19. Parallel guide
21. Cutting mark
22. Dust extraction connection
3. ASSEMBLY
Before any work on the power tool,
remove the battery.
The battery must be charged before first
use.
Inserting the battery into the machine
Fig. F
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
1. Insert the battery (4) into the base of the
machine as shown in Fig. F.
2. Push the battery further forward until it clicks
into place.
Removing the battery from the machine
Fig. F
1. Push the battery unlock button (5).
2. Pull the battery out of the machine like shown
in Fig. F.
8
EN
Replacing the saw blade
Fig. A, B
When mounting the saw blade, wear
protective gloves. Danger of injury when
touching the saw blade.
Only use saw blades that correspond
with the characteristic data given in the
operating instructions.
Fold the Guard (12) upwards before replacing
the saw blade. Always saw with the guard folded
downwards.
Mounting the saw blade
Make sure the blade holder is free of material
debris (such as splinters of wood or metal).
1. Turn the clamping lever (13) as far to the left as
possible and hold it in this position.
2. Insert the saw blade in the chuck (16). Check
that the saw blade is securely fixed and that
the teeth are pointing in the cutting direction.
3. Let go of the clamping lever. Check whether
the back of the saw blade is positioned in the
centre of the guide roller (10). Make sure to
use the right sawblade for the corresponding
material. Included with the machine is a coarse
sawblade for wood and a fine sawblade for
metal and plastics.
Removing the saw blade
1. Turn the clamping lever (13) as far to the left as
possible and hold it in this position.
2. Remove the saw blade from the chuck (16).
3. Let go of the clamping lever.
Attaching the parallel guide
Fig. C
1. Loosen the bolts (14).
2. Mount the parallel guide (19) onto the
baseplate (9).
3. Set the desired cutting width using the scale
on the parallel guide (19) and the cutting mark
on the baseplate (9). The cutting mark (21)
indicates the position of the saw blade.
4. Tighten the bolts (14).
4. OPERATION
Switching the machine on/off
Fig. A
The on/off switch (2) is used for activating the
machine and adjusting speed.
To start the machine, press and hold the lockoff
button (1) and press the on/off switch (2).
The further the on/off switch (2) is being
pushed, the faster the blade will move. The
required speeds depends on the material and
can be determined by practical testing.
To stop the machine, release the on/off switch
(2).
Adjusting the bevel angle
Fig. A, D
1. Loosen the bolts (18), using the hex key (15).
2. Adjust the baseplate (9) to the desired position
(0°- 45°). The sawing angle (bevel) can be read
on the scale (7).
3. Tighten the bolts (18), using the hex key (15).
It is possible to store the hex key onto the
machine, as shown on Fig. A.
Adjusting the pendulum action
Fig. A
The pendulum action switch (6) is used to set the
way in which the teeth of the saw blade grip the
material. The pendulum action switch can be set
to 4 positions:
0 - No pendulum action
1 - Small pendulum action
2 - Medium pendulum action
3 - Large pendulum action
The required pendulum action can be determined
by practical testing, although the following
instructions can be observed:
Soft material (wood, plastics etc.): set the
pendulum to level II or III. For a finer and
cleaner saw cut, use pendulum level 0 or I.
Thin material, use pendulum level 0.
Hard material (hardwood, steel etc.): set the
pendulum to level 0.
Curves: set pendulum to level 0.
9
EN
Dust extraction
Fig. E
Insert the dust extraction adapter (8) into the
dust extraction connection (22).
Connect the hose of a vacuum cleaner to the
dust extraction adapter (8).
Plunge cutting
Fig. G
Plunge cutting may only be used on soft materials
such as wood, aerated concrete, gypsum plaster
boards, etc. However, this requires a certain
practice and is only possible with short saw
blades.
1. Place the saw onto the workpiece and switch it
on.
2. Ensure that the bottom edge of the footplate
rests on the workpiece surface as shown on
Fig. G.
3. Slowly saw into the workpiece at an angle,
moving the saw to a vertical position and
continue to saw along the cutting line.
4. Switch the saw off and lift off the workpiece
when the work is complete.
Optimum use
Clamp the workpiece. Use a clamping device
for small workpieces.
Draw a line to define the direction in which to
guide the saw blade.
Firmly hold the machine by the grip.
Set the sawing speed.
Set the mitre angle.
Switch on the machine.
Wait until the machine has reached full speed.
Place the saw shoe on the workpiece.
Slowly move the machine along the pre-drawn
line, firmly pressing the saw shoe against the
workpiece.
Do not apply too much pressure on the
machine. Let the machine do the work.
Switch off the machine and wait for the
machine to come to a complete standstill
before putting the machine down.
5. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
battery pack from the machine.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and
dirt. Remove very persistent dirt using a soft
cloth moistened with soapsuds. Do not use any
solvents such as gasoline, alcohol, ammonia,
etc. Chemicals such as these will damage the
synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
WARRANTY
FERM products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact your FERM
dealer directly.
The following circumstances are excluded from this
guarantee:
Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers.
Normal wear and tear.
The tool has been abused, misused or
improperly maintained.
Non-original spare parts have been used
This constitutes the sole warranty made by
company either expressed or implied. There are
no other warranties expressed or implied which
10
NL
extend beyond the face hereof, herein, including the
implied warranties of merchantability and fitness
for a particular purpose. In no event shall FERM be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
DECOUPEERZAAG
JSM1033
Hartelijk dank voor de aanschaf van dit FERM
product. Hiermee heeft u een uitstekend product
aangeschaft van één van de toonaangevende
Europese distributeurs. Alle Ferm producten
worden gefabriceerd volgens de hoogste
prestatie- en veiligheidsnormen. Deel van
onze filosofie is de uitstekende klantenservice
die wordt ondersteund door onze uitgebreide
garantie. Wij hopen dat u vele jaren naar
tevredenheid gebruik zult maken van dit product.
1. VEILIGHEIDSVOORSCHRIFTEN
Lees de bijgesloten
veiligheidsvoorschriften, de
aanvullende veiligheidsvoorschriften
en de instructies. Het niet in acht nemen van de
veiligheidsvoorschriften en de instructies kan
leiden tot elektrische schok, brand en/of ernstig
letsel. Bewaar de veiligheidsvoorschriften en
de instructies voor toekomstig gebruik.
De volgende symbolen worden gebruikt in de
gebruikershandleiding of op het product:
Lees de gebruikershandleiding.
Gevaar voor lichamelijk letsel, overlijden
of schade aan de machine wanneer de
instructies in deze handleiding niet
worden opgevolgd.
Variabele elektronische snelheid.
Draag een veiligheidsbril.
Draag gehoorbescherming.
Draag een stofmasker.
Werp het product niet weg in
ongeschikte containers.
Het product is in overeenstemming met
de van toepassing zijnde veiligheids-
normen in de Europese richtlijnen.
11
NL
ALGEMENE VEILIGHEIDSVOOR-
SCHRIFTEN
WAARSCHUWING!
Lees alle veiligheidswaarschuwingen
en alle instructies. Het niet opvolgen
van onderstaande instructies kan leiden tot een
elektrische schok, brand en/of ernstig persoonlk
letsel.
Bewaar deze instructies.
De term “elektrisch gereedschap” in onder staande
waarschuwingen heeft betrekking op zowel
apparatuur met een vaste elektriciteits kabel als op
apparatuur met een accu (draadloze apparatuur).
1) Werkgebied
a) Zorg voor een opgeruimde en goed verlichte
werkomgeving. Rommelige en donkere
werkomgevingen leiden tot ongelukken
b) Gebruik elektrisch gereedschap nooit in
een omgeving waar explosiegevaar bestaat,
zoals in de nabheid van ontvlambare
vloeistoffen, gassen, dampen of andere
stoffen. Elektrische gereedschappen kunnen
vonken veroorzaken, die deze stoffen tot
ontbranding kunnen brengen.
c) Wanneer u elektrisch gereedschap gebruikt,
houd dan kinderen en omstanders op
afstand. Wanneer u wordt afgeleid, kunt u de
controle over het gereedschap verliezen.
2) Elektrische veiligheid
a) Stekkers van elektrische gereedschappen
moeten probleemloos passen op het
stopcontact. Breng nooit wzigingen aan in
of aan de stekker. Gebruik geen adapters
voor geaarde elektrische gereedschappen.
Standaardstekkers en passende stopcontacten
verkleinen de kans op een elektrische schok.
b) Voorkom lichamelk contact met geaarde
oppervlakken van bvoorbeeld ppen,
leidingen, radiatoren, fornuizen en koel-
kasten. Wanneer uw lichaam geaard is, wordt
de kans op een elektrische schok groter.
c) Stel elektrische gereedschappen nooit
bloot aan regen of vocht. Wanneer er water
binnendringt in een elektrisch gereedschap,
wordt de kans op een elektrische schok groter.
d) Gebruik het snoer niet om het elektrisch
gereedschap te dragen, te verplaatsen of
de stekker uit het stopcontact te trekken.
Bescherm het snoer tegen olie, warmte,
scherpe randen en bewegende delen.
Beschadigde of vastzittende snoeren vergroten
de kans op een elektrische schok.
e) Wanneer u elektrische gereedschappen
buiten gebruikt, gebruik dan een
verlengkabel die geschikt is voor
buitengebruik. Door een kabel te gebruiken
die geschikt is voor buitengebruik, wordt de
kans op een elektrische schok kleiner.
f) Gebruik een aardlekbeveiliging (RCD) als
niet te voorkomen is dat een powertool
moet worden gebruikt in een vochtige
omgeving. Gebruik van een RCD vermindert
het risico van elektrische schokken.
3) Persoonlijke veiligheid
a) Blf altd alert, kk goed wat u doet en
gebruik uw gezonde verstand wanneer
u een elektrisch gereedschap gebruikt.
Gebruik geen elektrische gereedschappen
wanneer u moe bent, of drugs, alcohol of
medicnen hebt gebruikt. Eén moment van
onachtzaamheid b het gebruik van elektrische
gereed schappen kan ernstige verwondingen
tot gevolg hebben.
b) Gebruik persoonlke beschermings
middelen. Draag altd een veiligheidsbril.
Een gepast gebruik van veiligheids voor-
zieningen, zoals een stof masker, speciale
werkschoenen met antislipzolen, een
veiligheidshelm en gehoor bescherming
verkleinen de kans op persoonlk letsel.
c) Voorkom dat het gereedschap per ongeluk
wordt gestart. Zorg dat de schakelaar op
de UIT positie staat, voordat u de stekker
in het stopcontact steekt. Draag elektrisch
gereedschap nooit met uw vinger op de
schakelaar en steek ook nooit de stekker van
ingeschakelde elektrische gereedschappen in
het stopcontact: dit leidt tot ongelukken.
d) Verwder alle instel en andere sleutels uit
het elektrisch gereedschap voordat u hem
inschakelt. Instel en andere sleutels aan een
ronddraaiend onderdeel van het elektrisch
gereedschap kunnen tot verwondingen leiden.
e) Zorg dat u nooit uw evenwicht kunt
verliezen; houd altd twee voeten stevig
op de vloer. Hierdoor kunt u het elektrisch
gereedschap in on verwachte situaties beter
12
NL
onder controle houden.
f) Zorg dat u geschikte kleding draagt. Draag
geen loshangende kleding of sieraden.
Houd uw haar, kleding en handschoenen
uit de buurt van bewegende delen. Loshan-
gende kleding, sieraden en lang haar kunnen
vast komen te zitten in bewegende delen.
g) Wanneer er voorzieningen zn voor de
aansluiting van stofafzuiginstallaties,
zorg dan dat ze op de juiste wze worden
aangesloten en gebruikt. Gebruik van deze
voorzieningen vermindert de gevaren die door
stof worden veroorzaakt.
h) Denk niet dat doordat u gereedschap
vaak gebruikt, u wel weet hoe het allemaal
werkt en dat u de veiligheidsbeginselen
voor het gebruik van het gereedschap wel
kunt negeren. Een onbezonnen actie kan in
een fractie van een seconde ernstig letsel tot
gevolg hebben.
4) Gebruik en onderhoud van elektrisch
gereedschap
a) Oefen geen overmatige kracht uit op
elektrisch gereedschap. Gebruik het
juiste gereedschap voor uw specieke
toepassing. Met het juiste elektrische
gereedschap voert u de taak beter en veiliger
uit wanneer dit op de snelheid gebeurt
waarvoor het apparaat is ontworpen.
b) Gebruik nooit elektrisch gereedschap
waarvan de AAN/UIT schakelaar niet werkt.
Ieder elektrisch gereedschap dat niet kan
worden in en uitgeschakeld met de schakelaar
is gevaarlk en moet worden gerepareerd.
c) Trek de stekker uit het stopcontact voordat
u wzigingen aanbrengt aan elektrische
gereedschappen, accessoires verwisselt of
het elektrisch gereedschap opbergt. Wan-
neer u zich aan deze preventieve veiligheids-
maatregelen houdt, beperkt u het risico dat het
gereedschap per ongeluk wordt gestart.
d) Berg elektrisch gereedschap dat niet in
ge bruik is op buiten bereik van kinderen
en laat personen die niet bekend zn
met het gereedschap of deze instructies
het apparaat niet gebruiken. Elektrisch
gereedschap is gevaarlk in de handen van
ongeoefende gebruikers.
e) Zorg voor een goed onderhoud van
elektrisch gereedschap. Controleer of
bewegende delen op de juiste wze zn
vastgezet. Controleer ook of er geen
onderdelen defect zn of dat er andere
omstandigheden zn die van invloed kunnen
zn op de werking van het gereedschap.
Laat het gereedschap b beschadigingen
repareren vóór gebruik. Veel ongelukken
worden veroorzaakt door slecht onderhoud van
het gereedschap.
f) Zorg dat sn en zaagwerktuigen scherp
en schoon blven. Goed onderhouden sn
en zaagwerktuigen met scherpe randen zullen
minder snel vastlopen en zn eenvoudiger
onder controle te houden.
g) Gebruik alle elektrische gereedschappen,
accessoires, bitjes etc., zoals aangegeven
in deze instructies en op de wze waarvoor
het gereedschap is ontworpen. Houd daarb
rekening met de werkomstandigheden en
de uit te voeren taak. Gebruik van elektrisch
gereedschap voor handelingen die afwken van
de taken waarvoor het apparaat is ontworpen
kunnen leiden tot gevaarlke situaties.
h) Houd handgrepen en greepoppervlakken
droog, schoon en vr van olie en vet. Gladde
handgrepen en greepoppervlakken maken
veilig werken en controle over het gereedschap
in onverwachte situaties onmogelk.
5) Gebruik en onderhoud accugereedschap
a) Laad alleen op met de lader die door de
fabrikant is gespeciceerd. Een lader die
voor een bepaalde accu geschikt is, kan brand
veroorzaken wanneer deze met een andere
accu wordt gebruikt.
b) Gebruik elektrisch gereedschap alleen
met de speciaal hiervoor bedoelde accu’s.
Gebruik van andere accu’s kan kans op letsel
en brand geven.
c) Wanneer de accu niet in gebruik is,
houd deze dan uit de buurt van andere
metalen voorwerpen zoals paperclips,
munten, sleutels, spkers, schroeven of
andere kleine metalen voorwerpen die
een verbinding tussen twee polen kunnen
maken. Kortsluiting tussen de accupolen kan
brandwonden of brand veroorzaken.
d) Wanneer de accu niet juist wordt gebruikt,
kan er vloeistof uit lopen; raak dit niet aan.
Wanneer dit per ongeluk wel gebeurt, spoel
dan met water. Wanneer de vloeistof in de
13
NL
ogen komt, moet u een arts raadplegen.
De vloeistof uit de accu kan irritaties of
brandwonden veroorzaken.
e) Gebruiken niet een accu of gereedschap
dat beschadigd is of gemodiceerd.
Beschadigde of gemodiceerde accu’s kunnen
onvoorspelbaar gedrag vertonen, wat brand,
explosie of een risico van letsel met zich
meebrengt.
f) Stel een accu over het gereedschap niet
bloot aan open vuur of een uitzonderlk
hoge temperatuur. Blootstelling aan vuur of
een temperatuur hoger dan 130 °C, kan een
explosie veroorzaken. NB De temperatuur
van “130 °C” kan worden vervangen door de
temperatuur van “265 °F”.
g) Houd u aan alle instructies voor het laden
en laad de accu of het gereedschap niet
op buiten het temperatuurbereik dat in de
instructies wordt aangeduid. Op een onjuiste
wze laden of laden b temperaturen buiten het
aangeduide bereik kan de accu beschadigen
en het risico van brand doen toenemen.
6) Service
a) Laat uw gereedschap onderhouden door
een gekwaliceerde onderhoudstechnicus
die alleen gebruikmaakt van identieke
vervangingsonderdelen. Dit zorgt ervoor dat
de veiligheid van de powertool intact blft.
b) Voer nooit servicewerkzaamheden uit aan
beschadigde accu’s. Alleen de fabrikant
of geautoriseerde service-providers mogen
servicewerkzaamheden aan accu’s uitvoeren.
VEILIGHEIDSVOORSCHRIFTEN
VOOR DECOUPEERZAGEN
Houd het elektrische gereedschap vast
aan de geïsoleerde oppervlakken wanneer
u werkzaamheden uitvoert waardoor het
accessoire in contact kan komen met
verborgen bedrading. Accessoires die
bedrading onder spanning raken kunnen
het gereedschap onder stroom zetten en de
gebruiker een elektrische schok geven.
Houd uw handen uit de buurt van de plaats
waar wordt gezaagd. Grijp niet onder het
werkstuk. Bij aanraking van het zaagblad
bestaat verwondingsgevaar.
Beweeg het elektrische gereedschap alleen
ingeschakeld naar het werkstuk. Anders
bestaat er gevaar voor een terugslag als het
inzetgereedschap in het werkstuk vasthaakt.
Let erop dat de voetplaat bij het zagen
stabiel ligt. Een schuin zaagblad kan breken
of tot een terugslag leiden.
Schakel het elektrische gereedschap na
beëindiging van de werkzaamheden uit
en trek het zaagblad pas uit de zaagsnede
nadat het gereedschap tot stilstand is
gekomen. Zo voorkomt u een terugslag en
kunt u het elektrische gereedschap veilig
neerleggen.
Gebruik alleen onbeschadigde zaagbladen
die helemaal in orde zijn. Verbogen of niet-
scherpe zaagbladen kunnen breken, het
zagen negatief beïnvloeden of een terugslag
veroorzaken.
Rem het zaagblad na het uitschakelen niet
af door er aan de zijkant tegen te drukken.
Anders kan het zaagblad beschadigd worden,
breken of een terugslag veroorzaken.
Gebruik een geschikt detectieapparaat om
verborgen stroom-, gas- of waterleidingen
op te sporen of raadpleeg het plaatselijke
energieof waterleidingbedrijf. Contact met
elektrische leidingen kan tot brand of een
elektrische schok leiden. Beschadiging van een
gasleiding kan tot een explosie leiden. Breuk van
een waterleiding veroorzaakt materiële schade.
Gebruik klemmen of een andere praktische
manier om het werkstuk op een stabiel
platform vast te zetten en te ondersteunen.
Het vasthouden van het werkstuk met de hand
of tegen uw lichaam leidt tot instabiliteit en dit
kan resulteren in het verlies van controle.
Wacht tot het elektrische gereedschap tot
stilstand is gekomen voordat u het neerlegt.
Het inzetgereedschap kan vasthaken en dit
kan tot het verlies van de controle over het
elektrische gereedschap leiden.
2. TECHNISCHE INFORMATIE
Bedoeld gebruik
De machine is bedoeld voor het zagen van hout,
metaal, kunststoffen, keramiek, rubber, enz. in
ieder gewenst formaat en iedere gewenste vorm,
terwijl de grondplaat stevig op het werkstuk blijft
rusten. Er moet altijd een geschikt zaagblad
worden gebruikt.
14
NL
Technical specifications
Model Nr. JSM1033
Spanning 20V DC
Onbelast toerental 0-2300/min
Zaagbeweging 18mm
Max. zaagcapaciteit hout 0° 80mm
Max. zaagcapaciteit staal 0° 6mm
Gewicht 1.85 kg
Geluidsdruk LPA 87.8 dB(A), K=3dB(A)
Geluidsniveau LWA 98.8 dB(A), K=3dB(A)
Trillingen ‘zagen metalen plaat’ 4.372 m/s
2
K=1.5 m/s
2
Trillingen ‘zagen multiplex’ 6.627 m/s
2
K=1.5 m/s
2
Gebruik uitsluitend de volgende accu’s van het
AX-POWER 20V accu-platform. Gebruik van
andere accu’s kan leiden tot ernstig letsel of tot
beschadiging van het gereedschap.
CDA1158 20V, 1.5Ah Lithium-Ion
CDA1154 20V, 2Ah Lithium-Ion
CDA1155 20V, 4Ah Lithium-Ion
De volgende lader kan worden gebruikt voor het
opladen van deze accu’s.
CDA1156 Lader-adapter
CDA1157 Snellader
De accu’s van het AX-POWER 20V accuplatform
kunnen worden gewisseld tussen alle
gereedschappen van het FERM AX-POWER
accu-platform.
Trillingsniveau
Het trillingsemissieniveau, dat in deze
gebruiksaanwijzing wordt vermeld, is gemeten in
overeenstemming met een gestandaardiseerde
test volgens EN 62841; deze mag worden
gebruikt om twee machines met elkaar te
vergelijken en als voorlopige beoordeling van
de blootstelling aan trilling bij gebruik van de
machine voor de vermelde toepassingen:
- gebruik van de machine voor andere
toepassingen, of met andere of slecht
onderhouden accessoires, kan het
blootstellingsniveau aanzienlijk verhogen.
- wanneer de machine is uitgeschakeld of
wanneer deze loopt maar geen werk verricht,
kan dit het blootstellingsniveau aanzienlijk
reduceren.
Bescherm uzelf tegen de gevolgen van
trilling door de machine en de accessoires te
onderhouden, uw handen warm te houden en uw
werkwijze te organiseren.
Beschrijving
De nummers in de tekst verwijzen naar de dia-
grammen op pagina 2 - 3.
1. Knop voor vergrendeling in de Uit-stand
2. Aan/Uit-schakelaar
3. Handgreep
4. Accu
5. Ontgrendelingsknop accu
6. Schakelaar voor rondgaande werking
7. Schaalverdeling voor verstekhoek
8. Stofzuigeradapter
9. Grondplaat
10. Geleideroller
12. Beschermkap
13. Klemhendel
14. Bouten voor parallelle geleiding
15. Inbussleutel
16. Zaaghouder
17. Zaagblad
18. Bout voor grondplaat
19. Parallelle geleider
21. Zaagmerkteken
22. Stofafzuigaansluiting
3. ASSEMBLAGE
Neem altijd voor werkzaamheden aan
het elektrische gereedschap de accu uit
het gereedschap.
De accu moet zijn opgeladen voordat
deze voor het eerst wordt gebruikt.
De accu in de machine plaatsen
Afb. F
Zorg ervoor dat het oppervlak van de
accu schoon en droog is voordat u deze
op de acculader of de machine aansluit.
1. Plaats de accu (4) in de onderkant van de
machine, zoals is weergegeven in Fig. F.
2. Duw de accu verder naar voren tot deze
vastklikt.
15
NL
De accu van de machine verwijderen
Afb. F
1. Duw op de ontgrendelingsknop van de accu (5)
2. Trek de accu uit de machine zoals afgebeeld in
Fig. F
Het zaagblad vervangen
Afb. A, B
Draag beschermende handschoenen
wanneer u het zaagblad monteert.
Gevaar voor persoonlijk letsel wanneer u
het zaagblad aanraakt.
Gebruik alleen zaagbladen waarvan de
typische gegevens overeenkomen met
die in de bedieningsinstructies.
Vouw de beschermkap (12) omhoog voor u het
zaagblad vervangt. Zaag altd met de bescherm-
kap omlaag gevouwen.
Het zaagblad monteren
Let erop dat de zaagbladhouder vrij is
van resten van materiaal (zoals splinters
van hout of metaal).
1. Draai de klemhendel (13) zover mogelijk naar
links en houd de hendel in die positie.
2. Steek het zaagblad in de zaaghouder (16).
Controleer dat het zaagblad stevig bevestigd
is en dat de tanden in de zaagrichting wijzen.
3. Laat de klemhendel los. Controleer dat de
achterzijde van het zaagblad in het midden van
de geleideroller (10) is bevestigd.
Gebruik vooral het juiste zaagblad voor het te
zagen metaal. B de machine wordt een grof
zaagblad voor hout en een jn zaagblad voor
metaal en kunststoffen geleverd.
Het zaagblad verwijderen
1. Draai de klemhendel (13) zover mogelijk naar
links en houd de hendel in die positie.
2. Haal het zaagblad uit de zaaghouder (16).
3. Laat de klemhendel los.
De parallelle geleiding bevestigen
Afb. C
1. Draai de Bouten voor parallelle geleiding (14)
los.
2. Monteer de parallelle geleiding (19) op de
grondplaat (9).
3. Stel de gewenste zaagbreedte in met de
schaalverdeling op de parallelle geleiding (19)
en met het zaagmerkteken op de grondplaat
(9). Het zaagmerkteken (21) geeft de positie
van het zaagblad aan.
4. Zet de Bouten voor parallelle geleiding (14)
vast.
4. BEDIENING
De machine in-/uitschakelen
Afb. A
U kunt de machine starten door op de knop
(1) voor vergrendeling de Uit-stand te drukken
en ingedrukt te houden en op de Aan/Uit-
schakelaar (2) te drukken.
Hoe verder u de Aan/Uit-schakelaar (2) duwt,
des te sneller zal het zaagblad bewegen.
Welke snelheid nodig is, is afhankelijk van het
materiaal en kan door middel van een zaagtest
worden vastgesteld.
U kunt de machine uitschakelen door de Aan/
Uit-schakelaar (2) los te laten.
De verstekhoek aanpassen
Afb. A, D
1. Draai de bout (18) los met de inbussleutel (15).
2. Stel de grondplaat (9) af in de gewenste positie
(0°- 45°). De zaaghoek (verstek) kan worden
afgelezen van de schaalverdeling (7).
3. Draai de bout (18) vast met de inbussleutel
(15). U kunt de inbussleutel op de machine
opbergen, zoals wordt getoond in Afb. A.
De functie voor rondgaande werking
Afb. A
Met de schakelaar voor de slingerwerking (6)
stelt u in hoe de tanden van het zaagblad in
het materiaal grijpen. De schakelaar voor de
slingerwerking kan in 4 standen worden gezet:
0 - Niet rondgaande werking
1 - Weinig rondgaande werking
2 - Middelste stand rondgaande werking
3 - Veel rondgaande werking
Hoeveel de functie voor de rondgaande werking
moet worden toegepast kan worden bepaald door
praktijktests, maar u kunt de volgende instructies
in acht nemen:
16
NL
Zacht materiaal (hout, kunststoffen, enz.):
stel de slinger in op niveau II of III. Met de
slingerwerking ingesteld op niveau 0 of I
bereikt u een fijnere en schonere zaagsnede.
Dun materiaal, slingerwerking op niveau 0.
Hard materiaal (hardhout, staal etc.): stel de
slingerwerking in op niveau 0.
Krommingen: stel de slingerwerking in op
niveau 0.
Stofafzuiging
Fig. E
Plaats de stofafzuigadapter (8) in de
stofafzuigaansluiting (22).
Sluit de slang van een stofzuiger aan op de
stofafzuigadapter (8).
Insteekzagen
Fig. G
U kunt de functie insteekzagen alleen gebruiken
in zachte materialen, zoals hout, gasbeton,
gipsplaten, enz. Dit vraagt echter enige oefening
en is alleen mogelijk met korte zaagbladen.
1. Plaats de zaag op het werkstuk en schakel de
zaag in.
2. Let erop dat de onderste rand van de voetplaat
op het oppervlak van het werkstuk rust, zoals
wordt getoond in Afb. G.
3. Zaag langzaam onder een hoek in het
werkstuk, terwijl u de zaag naar een verticale
stand langs de zaaglijn beweegt.
4. Schakel de zaag uit en haal de zaag van het
werkstuk wanneer het werk is voltooid.
Optimaal gebruik
Klem het werkstuk vast. Gebruik
klemgereedschap voor kleine werkstukken.
Teken een lijn om de richting te bepalen waarin
het zaagblad moet worden geleid.
Houd de machine stevig vast bij de handgreep.
Stel de zaagsnelheid in.
Stel de verstekhoek in.
Stel de pendelpositie in.
Schakel de machine in.
Wacht totdat de machine volledig op snelheid is.
Plaats de zaagschoen op het werkstuk.
Beweeg de machine langs de vooraf
getekende lijn, waarbij de zaagschoen stevig
tegen het werkstuk wordt gedrukt.
Oefen niet te veel druk uit op de machine. Laat
de machine het werk doen.
Schakel de machine uit en wacht totdat de
machine volledig tot stilstand is gekomen
voordat u de machine wegzet.
5. ONDERHOUD
Schakel, voordat u met de reiniging en
het onderhoud begint, altijd de machine
uit en haal het accupack uit de machine.
Reinig de machinebehuizing regelmatig met een
zachte doek, bij voorkeur iedere keer na gebruik.
Zorg dat de ventilatiesleuven vrij van stof en
vuil zijn. Gebruik bij hardnekkig vuil een zachte
doek bevochtigd met zeepwater. Gebruik geen
oplosmiddelen als benzine, alcohol, ammonia,
etc. Dergelijke stoffen beschadigen de kunststof
onderdelen.
MILIEU
Defecte en/of afgedankte elektrische of
elektronische gereedschappen dienen
ter verwerking te worden aangeboden
aan een daarvoor verantwoordelijke
instantie.
Uitsluitend voor EG-landen
Werp elektrisch gereedschap niet weg bij het
huisvuil. Conform de Europese Richtlijn 2012/19/
EG voor Afgedankte Elektrische en Elektronische
Apparatuur en de implementatie ervan in
nationaal recht moet niet langer te gebruiken
elektrisch gereedschap gescheiden worden
verzameld en op een milieuvriendelijke wijze
worden verwerkt.
GARANTIE
FERM producten zijn ontworpen volgens de
hoogste kwaliteitsstandaarden en gegarandeerd
vrij van defecten, zowel materieel als
fabrieksfouten, tijdens de wettelijk vastgestelde
garantieperiode vanaf de eerste aankoopdatum.
Mocht het product tijdens deze periode gebreken
vertonen veroorzaakt door defecte materialen en/
of fabrieksfouten, neem dan rechtstreeks contact
op met FERM.
17
FR
De volgende situaties vallen niet onder de
garantie:
Er zijn reparaties of aanpassingen aan
de machine uitgevoerd, of er is een
poging daartoe ondernomen, door een
nietgeautoriseerd servicecentrum.
Normale slijtage.
De machine is misbruikt, verkeerd gebruikt of
slecht onderhouden.
Er zijn niet-originele reserveonderdelen
gebruikt.
Dit vormt de enige garantie opgesteld door het
bedrijf zowel expliciet als impliciet. Er bestaan
geen andere garanties expliciet of impliciet welke
verder gaan dan deze garantie, inclusief impliciete
garanties van verkoopbaarheid en geschiktheid
voor bepaalde doeleinden. In geen enkel geval
kan FERM aansprakelijk worden gesteld voor
incidentele schade of gevolgschade. Reparaties
van dealers zijn gelimiteerd tot de reparatie of
vervanging van defecte producten of onderdelen.
Het product en de gebruikershandleiding zijn
onderhevig aan wijzigingen. Specificaties
kunnen zonder opgaaf van redenen worden
gewijzigd.
SCIE SAUTEUSE
JSM1033
Merci pour votre achat de ce produit FERM. Vous
disposez maintenant d’un excellent produit,
proposé par l’un des principaux fabricants
européens. Tous les produits que vous fournit
Ferm sont fabriqués selon les normes les plus
exigeantes en matière de performances et
de sécurité. Complété par notre garantie très
complète, l’excellence de notre service clientèle
forme également partie intégrante de notre
philosophie. Nous espérons que vous profiterez
longtemps de ce produit.
1. AVERTISSEMENTS DE
SÉCURITÉ
Consultez les avertissements de
sécurité, les avertissements de
sécurité additionnels ainsi que les
instructions fournis ici. Le non respect des
avertissements de sécurité et des instructions
peut occasionner une électrocution, un incendie
ou des blessures graves. Conservez les
avertissements de sécurité et les instructions
pour référence future.
Les symboles suivants sont utilisés dans le
manuel d’utilisation ou apposés sur le produit :
Lisez le manuel d’utilisation.
Signale un risque de blessures, un danger
mortel ou un risque d’endommagement
de l’outil en cas de non-respect des
instructions de ce manuel.
Variateur électronique de vitesse.
Portez des lunettes de protection.
Portez une protection auditive.
Portez un masque anti-poussière.
Ne jetez pas le produit dans des
conteneurs qui ne sont pas prévus à cet
effet.
18
FR
Le produit est conforme aux normes de
sécurité applicables des directives
européennes.
CONSIGNES GÉNÉRALES DE
SÉCURITÉ
AVERTISSEMENT!
Veuillez lire l’intégralité des
avertissements de sécurité et des
instructions. Le non respect de toutes les
instructions indiquées ci dessous peut entraîner
un risque de choc électrique, d’incendie et/ou de
blessures graves.
Conservez ces instructions.
Le terme “appareil électrique” mentionné dans
tous les avertissements ci dessous se rapporte à
un appareil électrique qui se branche au réseau
électrique (grâce à un câble d’alimentation) ou
à un appareil électrique (sans l) fonctionnant
grâce à une batterie.
1) Espace de travail
a) Veillez toujours à garder votre espace de
travail propre et bien éclairé. Les espaces
mal rangés et sombres peuvent être la cause
d’accidents.
b) N’utilisez pas les appareils électriques
dans des environnements susceptibles
d’explosion, par exemple en présence
de liquides inammables, de gaz ou
de particules. Les appareils électriques
provoquent des étincelles qui peuvent
enammer les particules des émanations.
c) Veillez à garder éloignés les enfants et
les personnes se trouvant dans votre
voisinage, lors de l’utilisation d’un appareil
électrique. Les disctractions peuvent vous
faire perdre le contrôle de l’appareil.
2) mesures de sécurité électriques
a) Les prises des appareils électriques
doivent être raccordées à la prise murale
corres pondante. Ne modiez jamais la
prise de l’appareil, de quelque façon que
ce soit. N’utilisez pas d’adaptateurs qui
mettent les appareils électriques à la terre
(mise à la masse). Des prises non modiées
et branchées à la prise murale correspondante
réduiront les risques de choc électrique.
b) Evitez le contact direct avec les surfaces
mises à la terre ou mises à la masse
comme les canalisations, les radiateurs,
les cuisinières et les réfrigérateurs. En effet,
le risque de choc électrique s’accrut si votre
corps est mis à la terre ou à la masse.
c) N’utilisez pas d’outils électriques dans des
evironnements pluvieux ou humides. Si de
l’eau s’introduit dans un appareil électrique, le
risque de choc électrique augmentera.
d) N’utilisez pas le câble de manière abusive.
N’utilisez jamais le câble pour transporter,
tirer ou débrancher l’appareil électrique.
Veillez à garder le câble éloigné des
sources de chaleur, des huiles, des rebords
coupants ou des pièces actionnées.
Les câbles endommagés ou entremêlés
augmentent le risque de choc électrique.
e) Lorsque un appareil est utilisé à l’extérieur,
utilisez uniquement un câble prolongateur
prévu à cet effet. L’utilisation d’un câble
à usage extérieur réduit le risque de choc
électrique.
f) Si vous êtes contraint d’utiliser un outil
électrique dans un environnement humide,
utilisez une alimentation protégée par
un dispositif à courant résiduel (RCD).
L’utilisation d’un RCD réduit le risque de
décharge électrique.
3) Sécurité personnelle
a) Restez vigilant, gardez un œil sur ce que
vous faites et utilisez votre sens commun
lors de l’utilisation d’un appareil électrique.
N’utilisez pas un appareil électrique si vous
êtes fatigué ou si vous êtes sous l’inuence
de drogues, d’alcool ou si vous prenez des
médicaments. Un moment d’inattention lors
de l’utilisation des appareils électriques peut
entraîner des blessures graves.
b) Utilisez un équipement de protection
personnelle. Protégez vous toujours les
yeux. Les équipements de protection, tels
qu’un masque à poussière, des chaussures
antidérapantes, des protections auditives ou
un casque de sécurité, utilisés dans de bonnes
conditions, réduiront le risque de blessures.
c) Prévenez tout démarrage involontaire.
Assurez vous que l’interrupteur est sur la
position “arrêt avant de brancher l’appareil.
En effet, le transport des appareils électriques
19
FR
en gardant vos doigts sur l’interrupteur, ou
le branchement de ces appareils en ayant
l’interrupteur sur “marche accidents.
d) Retirez les clés de réglage ou les clés de
vis de réglage avant d’allumer l’appareil
électrique. Une clé de vis de réglage ou une
clé, laissée sur une pièce en mouvement de
l’appareil électrique, peut entraîner des lésions
corporelles.
e) Ne pas se précipiter. Gardez toujours vos
pieds à plat et gardez votre équilibre. Ceci
permet de mieux contrôler l’appareil électrique
dans des situations imprévues.
f) Habillez vous convenablement. Ne portez
pas de vêtements lâches ou de boux.
Gardez vos cheveux, vêtements et gants
éloignés des pièces actionnées. En effet,
ces derniers peuvent être pris dans les pièces
en action.
g) Si les appareils sont fournis pour la
connexion des équipements d’évacuation
et de récupération de la poussière,
assurez vous que ces derniers soient
correctement connectés et utilisés.
L’utilisation de ces appareils peut réduire les
risques liès à la poussière.
h) Ne pensez pas être familiarisé avec l’outil
après l’avoir utilisé à de nombreuses
reprises, au point de ne plus rester vigilant
et d’en oublier les consignes de sécurité.
Toute action imprudente peut engendrer de
graves blessures en une fraction de seconde.
4) Utilisation et entretien d’un appareil électrique
a) Ne forcez pas l’appareil électrique. Utilisez
l’appareil électrique adéquat pour votre
application. Un appareil électrique correc te
ment choisi assurera un meilleur travail et un
travail sans danger, au rythme auquel il a été
conçu.
b) N’utilisez pas l’appareil électrique si
l’interrupteur marche/arrêt ne fonctionne
pas. Un appareil électrique qui ne peut pas
être commandé par l’interrupteur de contrôle
est dangereux et doit être réparé.
c) Débranchez la prise du bloc d’alimentation
avant d’effectuer des réglages, de changer
des acces soires, ou de ranger les appreils
élec tri ques. Ces mesures de sécurité
préventives réduiront le risque de démarrage
involontaire de l’appareil électrique.
d) Rangez les appareils électriques arrêtés
hors de la portée des enfants et ne laissez
aucune personne, non familiarisée avec
l’outil ou ces instructions, utiliser l’appareil
électrique. Les appareils électriques sont
dangereux entre les mains d’utilisateurs non
formés.
e) Entretenez les appareils électriques. Vériez
tout défaut d’alignement et l’enchaînement
des pièces actionnées, la rupture de ces
dernières, et les autres conditions qui
peuvent affecter le fonctionnement des
appareils électriques. En cas de dommages,
faites réparer l’appareil électrique avant
de le réutiliser. Nombreux sont les accidents
provoqués par des appareils électriques mal
entretenus.
f) Veillez à garder les outils coupants aiguisés
et propres. Des outils coupants correctement
entretenus avec des lames aiguisées sont
moins susceptibles de se bloquer et sont plus
faciles à contrôler.
g) Utilisez l’appareil électrique, les accessoires
et les embouts, etc., conformément à ces
instructions et de la manière prévue pour
le type spécique de l’appareil électrique,
en prenant en compte les conditions de
travail et le travail à effectuer. L’utilisation
de l’appareil électrique dans des applications
différentes de celles prévues peut entraîner
des situations dangereuses.
h) Gardez les poignées et les surfaces de
préhension sèches, propres et exemptes
d’huile et de graisse. Des poignées et
des surfaces de préhension glissantes ne
permettent pas de manipuler et de contrôler
l’outil correctement en cas de situations
inattendues.
h) Gardez les poignées et les surfaces de
préhension sèches, propres et exemptes
d’huile et de graisse. Des poignées et des
surfaces de préhension glissantes ne per-
mettent pas de manipuler et de contrôler l’outil
correctement en cas de situations inattendues.
5) Utiliser et soigner les outils à batterie
a) Rechargez la batterie uniquement avec
le chargeur spécié par le fabricant. Un
chargeur adapté à une certaine batterie peut
être cause de danger d’incendie quand on
l’utilise avec une batterie différente.
20
FR
b) Utilisez chaque outil uniquement avec la
batterie conçue pour lui. L’utilisation de
toute autre batterie peut être cause de danger
de blessure ou d’incendie.
c) Lorsque une batterie n’est pas en
usage, gardez la hors d’atteinte d’objets
métalliques tels que les trombones, pièces
de monnaie, clés, clous, vis et autres petits
objets métalliques pouvant faire le contact
entre une borne et l’autre. Un court circuit
entre les bornes de la batterie peut être cause
de brûlures ou d’incendie.
d) Dans des circonstances extrêmes, du
liquide peut gicler hors de la batterie ;
évitez tout contact. En cas de contact
accidentel, rincez à l’eau. En cas de
contact du liquide avec les yeux, consultez
un médecin. Le liquide qui gicle d’une
batterie peut causer irritations ou brûlures.
e) N’utilisez pas un bloc-batterie ou un outil
endommagé ou modié. Une batterie
endommagée ou altérée peut avoir un
comportement imprévisible qui peut conduire
à un incendie, une explosion ou un risque de
blessure.
f) N’exposez pas le bloc-batterie ou l’outil
au feu ou à des températures excessives.
L’exposition au feu ou à des températures
dépassant 130 °C peut provoquer une
explosion. REMARQUE La température
de “130°C” peut être remplacé par la
température de “265°F”.
g) Respectez les instructions pour la charge
et ne rechargez pas le bloc-batterie ou
l’outil à une plage de températures hors de
celle spéciée dans les instructions. Une
charge mal effectuée ou à des températures
hors de la plage spéciée peut endommager
la batterie et augmente le risque d’incendie.
6) Maintenance
a) L’entretien de votre outil électrique doit
être coné à un réparateur qualié qui
utilise uniquement des pièces de rechange
identiques aux pièces d’origine. Cela permet
d’assurer la sécurité de l’outil électrique
b) Ne réparez jamais des blocs-batteries
endommagés. Les réparations sur les blocs-
batteries ne doivent être effectuées que par
le fabricant ou l’un de ses prestataires de
services agréés.
INSTRUCTIONS DE SÉCURITÉ
POUR SCIES SAUTEUSES
Tenez l‘outil par ses surfaces de prehension
isolées si vous effectuez une opération lors
de laquelle l‘accessoire de coupe pourrait
entrer en contact avec des fils cachés sous
tension. Tout contact d‘un accessoire de coupe
avec un fil sous tension peut mettre les parties
métalliques exposées de l’outil sous tension et
provoquer un choc électrique à l’utilisateur.
Garder les mains à distance de la zone de
sciage. Ne pas passer les mains sous la
pièce à travailler. Lors d’un contact avec la
lame de scie, il y a risque de blessures.
N’approchez l’outil électroportatif de la
pièce à travailler que quand l’appareil est en
marche. Sinon, il y a risque d’un contrecoup,
au cas où l’outil se coincerait dans la pièce.
Veiller à ce que la plaque de base repose
bien sur le matériau lors du sciage. Une
lame de scie coincée peut casser ou entraîner
un contrecoup.
Une fois l’opération terminée, arrêter
l’outil électroportatif et ne retirer la lame
de scie de sa ligne de coupe que lorsque
celle-ci est complètement à l’arrêt. Ainsi, un
contrecoup est évité et l’outil électroportatif
peut être retire en toute sécurité.
N’utiliser que des lames de scie en parfait
état. Les lames de scie déformées ou
émoussées peuvent se casser, avoir des effets
négatifs sur la qualité de la coupe ou causer un
contrecoup.
Une fois l’appareil arrêté, ne pas stopper
la lame de scie en exerçant une pression
latérale sur celle-ci. La lame de scie peut
être endommagée, se casser ou causer un
contrecoup.
Utiliser des détecteurs appropriés afin de
déceler des conduites cachées ou consulter
les entreprises d’approvisionnement
locales. Un contact avec des conduites
d’électricité peut provoquer un incendie ou un
choc électrique. Un endommagement d’une
conduite de gaz peut provoquer une explosion.
La perforation d’une conduite d’eau provoque
des dégâts matériels.
Utiliser des pinces ou autre moyen pratique
pour fixer et soutenir la pièce à usiner sur
une plateforme stable. Tenir la pièce à usiner
par la main ou contre le corps la rend instable
1 / 1

Ferm JSM1033 Instrukcja obsługi

Kategoria
Elektronarzędzia
Typ
Instrukcja obsługi