Topdon Phoenix Lite 2 Instrukcja obsługi

Phoenix Lite 2

USER MANUAL

Smart Automotive Diagnostic System

86-755-21612590

1-833-629-4832 (North America)

For Services and Support

TEL

EMAIL

WEBSITE

FACEBOOK

TWITTER

SUPPORT@TOPDON.COM

WWW.TOPDON.COM

@TOPDONOFFICIAL

Welcome

DE RUEN PL

323745 28593 141 189

423846 28694 142 190

423947 28795 143 191

524048 28896 144 192

7242

38

42

277

282

37 276

37 275

36 274

12 247

50 290

96

91

326

331

85 325

84 324

83 323

55 295

98

134

139

133

132

131

103

146

182

187

181

180

179

151

194

229

234

228

227

226

199

FR ES PT

About

What Is in the Box

Compatibility

Notice

General Information of OBDII

(On-Board Diagnostics II)

Diagnostic Trouble Codes (DTCs)

Product Descriptions

Warnings

Operation Introduction

FAQ

Warranty

Preparation & Connection

Cautions

Technical Specication

English

3

EN

Welcome

About

Package List

Thank you for purchasing TOPDON's Smart Automotive Diagnostic System Phoenix Lite 2.

Please read and understand this user manual prior to the operation.

TOPDON's Phoenix Lite 2 features comprehensive diagnostic capabilities. The accuracy

of test readings, expanded vehicle coverage, improved speed and an abundance of user-

friendly nature make this diagnostic tablet stand out in its class and give mechanics and

professionals a great deal of help in their diagnostic work.

•Phoenix Lite 2

•Phoenix MDCI Lite

•OBDI Adapter BOX Transfer Line

•OBDII Extension Cable

•Cigarette Lighter Cable

•Type-C to USB Cable

•Battery Clamps/Cable Set

•Power Adaptor

•User Manual

•Password Letter

•Non-Standard OBDII Adapter*10

•Fuse (φ5*20mm)*4

•Fuse (φ6*30mm)*2

Compatibility

•ISO 9142

•ISO 14230

•ISO 15765

•K/L-Line

•Flashing Code

•CAN ISO 11898

•SAE-J1850 VPW

•SAE-J1850 PWM

•Highspeed CAN

•Middlespeed CAN

•Lowspeed and Singlewire CAN

•Fault-Tolerant CAN

•GM UART

•TP 2.0

•TP 1.6

•UART Echo Byte Protocol

•Honda Diag-H Protocol

TOPDON's Phoenix Lite 2 is compatible with the following protocols:

4

Notice

General Information of OBDII (On-Board Diagnostics II)

Diagnostic Trouble Codes (DTCs)

Phoenix Lite 2 may automatically reset while being disturbed by strong static electricity. THIS

IS A NORMAL REACTION.

This user manual is subject to change without written notice.

Read the instruction carefully and use the unit properly before operating. Failure to do so may

cause damage and/or personal injury, which will void the product warranty.

The OBDII system is designed to monitor emission control systems and key engine

components by performing either continuous or periodic tests of specic components and

vehicle conditions, which will offer three pieces of such valuable information:

•Whether the Malfunction Indicator Light (MIL) is commanded “on” or “off”;

•Which, if any, Diagnostic Trouble Codes (DTCs) are stored;

•Readiness Monitor status.

5

EN

Product Descriptions

5 7

6

1

4

23

NO. Name Descriptions

1Power Button

•Hold the button for 3 seconds to turn the tablet on, or off.

•Hold the button for 10 seconds for a forced restart.

2Type-C Charging Slot

For charging the tablet.

3USB Port

Can be used to charge 5V electronic devices.

4Rear Camera

Snapshot the view ahead of the camera.

58” Touchable Screen

Show test results.

6Loudspeaker

Convert an audio signal into a corresponding sound.

7Adjustable Stand Keep the device standing on the desk, or hang the device on

the steering wheel.

6

NO. Name Descriptions

1Indicator Light

Three LED indicators are provided on each side, and the

prompts are as follows:

•Power: Green light indicates power on.

•Connect:Blue light means that it has been connected to the

device by bluetooth.

•Vehicle: Blue flashing shows that it is communicating with

the vehicle.

2OBD Port

Plug in the diagnostic cable whose OBD 16-pin connector is

linked to the DLC of the vehicle.

2

1

7

EN

Preparation & Connection

1. Turn the ignition off.

2. Locate the vehicle’s DLC port.

3. Plug the TOPDON Phoenix MDCI Lite dongle into the vehicle’s DLC port.

8

4. Turn the ignition on. The engine can be off or running.

5. Hold the power button for 3 seconds to turn the tablet on. (The tablet must be charged.)

The tablet will start initializing and enter the following interface:

6. Language Setting

Select operating language in the following interface:

Note: Don’t connect or disconnect any test equipment with the ignition on or engine running.

9

EN

Choose the time zone of your current location. The system will automatically congure the

time.

The system will automatically search all available Wi-Fi networks. Please connect to the

trusted Wi-Fi accounts.

8. Choose Time Zone

7. Connect Wi-Fi

10

Please read all the terms and conditions of the user agreement carefully. Select “Agree with

above terms”.

You can log in with an available TOPDON account, or register a new account with a valid

e-mail address.

Tap “Next” to log in. The following page will appear:

9. User Agreement

10. Create an Account

11

EN

Input the serial number and activation code to activate and bind the diagnostic MDCI Lite

dongle. Both the serial number and the activation code are available in the “Password

Letter”. The activation procedure is necessary for using the Phoenix Lite 2 properly.

Tap “Activate” to nish the procedure, and get started with Phoenix Lite 2.

After inputting the information required, tap “Register”. The tablet will enter the MDCI Lite

Activation procedure.

11. MDCI Lite Activation

12

TOPDON's Phoenix Lite 2 features an array of practical functions, including Scan, AutoScan,

Services, Tester, Support, Update, Library, History, Feedback, Coverage List and User Info.

Operation Introduction

TOPDON's Phoenix Lite 2 supports AutoScan and Scan covering OBDII diagnosis, full system

diagnosis for most modern vehicle models worldwide.

Plug the Phoenix MDCI Lite dongle into the vehicle’s DLC port.

Tap “AutoScan” on the Home Menu after connecting to the vehicle.

The tool will start the AutoScan procedure, and automatically read the vehicle’s VIN

information, as shown below:

1. AutoScan (Intelligent Diagnosis)

13

EN

If Phoenix Lite 2 fails to get access to the vehicle VIN data automatically, tap “Scan” on

the Home Menu. The following page will appear:

Note: If the AutoScan can not identify the vehicle, please try to connect to the network.

Not all cars support the AutoScan function due to auto manufacturers' settings.

2. Scan (Manual Diagnosis)

There are two ways in this module to get access to vehicle diagnostic functions.

2.1 The rst way is using “VINSCAN”.

Tap “VINSCAN”. The following page will appear:

14

2.1.1 Tap “Camera Scan”. The following page will appear

If the VIN barcode cannot be recognized, please tap to manually input the VIN.

After scanning, the following page will appear:

15

EN

2.1.2 Or, tap “Enter VIN”, the following page will appear:

Note: the VIN code in yellow can be modied if it isn’t correct.

You need to input the vehicle’s VIN manually.

Note: VIN characters need to be capital letters A through Z and numbers 1 through

0. However, the letters I, O, and Q won't be used in order to avoid misreading. No

symbols or spaces are allowed in the VIN.

2.2 The second way is manually selecting the vehicle’s make, model, and year.

Tap a corresponding diagnostic software logo on the following page:

Take “Demo” as an example. The following page will appear:

16

Tap "OK", the tablet will automatically navigate to the Show Menu:

2.2.1 Health Report

It enables you to quickly access all the electronic control units of the vehicle

and generate a detailed report about vehicle health. (This function varies

from vehicle to vehicle.)

"Health Report", the system will start scanning Electronic Control Units to

see if there are fault codes and displays the specic results.

17

EN

Click "Report" to generate a vehicle health report.

18

Scan the manually selected vehicle electric control system. Tap “PCM” --- as an

example to demonstrate. The following page shows the selection interface.

Note: This function will be available only when the diagnostic software supports it.

A. Version Information

This function reads the current version information of ECU.

2.2.2 System Scan

This function will automatically scan all systems of the vehicle.

Strona się ładuje...

Topdon Phoenix Lite 2 Instrukcja obsługi

Topdon Phoenix Lite 2 Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty