Hoover HOZ5870IN Instrukcja obsługi

Kategoria
Mikrofale
Typ
Instrukcja obsługi
PROPERTY OF
CL N° REV. DATE
SPECIFICATION
1/1
MODIFY DESCRIPTION
MODIFIED BY
BASE CODE
TREATMENT
MATERIAL
DATE SIGNATURE
DRAWN
CHECKED
FOR
WEIGHT SCALE
SIZE
NAME
(LOCAL LANGUAGE)
PART CODE
SHEET
REPLACE No ORIGIN CL No Class Specification
FR
RELEASE LEVEL
WITHOUT OUR WRITTEN CONSENT IS FORBIDDEN
ALL RIGHTS RESERVED, THE REPRODUCTION OF ANY PART
OF EU DIRECTIVE 2002/95/CE + AMENDMENTS
MATERIALS IN COMPLIANCE WITH REQUIREMENTS
A5
------------
29.04.2019
KULLANMA KILAVUZU HOZ5870IN
55196
29.04.2019
Y.GÜLTÜRK
-
USER MANUAL HOZ5870IN
HOOVER OVEN
GENERAL TOLERANCE
ISO 2768 - m
-
-
SC 000-000
PRODUCTION RELEASED
------------
A
B
C
D
E
42831609
70 gr/m
2
PAPER TECHNICAL DATA SHEET / KAĞIT MALZEMESİ
USER INSTRUCTIONS
OVENS
EN
FR
NOTICE D'EMPLOI ET D'INSTALLATION
DES FOURS ENCASTRABLES
02
15
POKYNY PRO UŽIVATELE
TROUBY
CZ
42
MANUALE D’ISTRUZIONI
FORNO
IT
29
RÚRA NA PEČENIE
NÁVOD NA POUŽITIE
SK
55
CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy
PIEKARNIKI DO ZABUDOWY
INSTRUKJA OBS UGIŁ
PL
68
Safety Indications
EN 02
WARNING: the appliance and accessible parts become hot during use.
Be careful not to touchanyhot parts.
- Remove large or coarsefoodresidues fromthe inside of the oven using
a damp sponge.Do not use detergents;
•Children under 8 must be kept at a safe distance from the appliance if
not continuously supervised.
Cook the vegetables in a container with a lid insteadof an open tray.
- Clean the ovendoor;
• During cooking, moisture may condense inside the oven cavity or on
the glass of the door. This is a normal condition. To reduce this effect,
wait 10-15 minutes after turning on the power before putting food
inside the oven. In any case, the condensation disappears when the
ovenreachesthe cooking temperature.
•WARNING: the accessible parts can become hot when the oven is in
use. Childrenmust be kept at a safe distance.
•WARNING: before initiating the automatic cleaning cycle:
- Remove all accessories and the sliding rackkit (where present);
Avoid leaving food inside the oven after cooking for more than 15/20
minutes.
•WARNING: ensure that the appliance is switched off before replacing
the bulb, toavoidthe possibility of electric shocks.
- Do not place tea towels
• In ovens with meat probe it is necessary, before making the cleaning
cycle, close the hole with the nut provided. Always close the hole with
the nut when the meatprobe is not used.
•Children must not play with the appliance. The appliance can be used
by those aged 8 or over and by those with limited physical, sensorial or
mental capacities, without experience or knowledge of the product,
only if supervised or provided with instruction as to the operation of the
appliance, in a safe way with awarenessof the possible risks.
•Only use the meat probe recommendedforthis oven.
•Do not use rough or abrasive materials or sharp metal scrapers to
clean the oven door glasses, as they can scratch the surface and cause
the glass toshatter.
•The oven must be switched off before removing the removable parts
and, aftercleaning, reassemble them according the instructions.
•Cleaning and maintenance should not be carried out by unsupervised
children.
EN 03
Do not use a steamcleaner forcleaning operations.
Connect a plug to the supply cable that is able to bear the voltage,
current and load indicated on the tag and having the earth contact. The
socket must be suitable for the load indicated on the tag and must be
having the earth contact connected and in operation. The earth
conductor is yellow-green in colour. This operation should be carried out
by a suitably qualified professional. In case of incompatibility between
the socket and the appliance plug, ask a qualified electrician to substitute
the socket with another suitable type. The plug and the socket must be
conformed to the current norms of the installation country. Connection
to the power source can also be made by placing an omnipolar breaker
between the appliance and the power source that can bear the
maximum connected load and that is in line with current legislation. The
yellow-green earth cable should not be interrupted by the breaker. The
socket or omnipolar breaker used for the connection should be easily
accessible when the appliance is installed.
• The disconnection may be achieved by having the plug accessible or
by incorporating a switch in the fixed wiring in accordance with the
wiring rules.
WARNING: Do not line the oven walls with aluminum foil or single-use
protection available from stores. Aluminum foil or any other protection,
in direct contact with the hot enamel, risk melting and deteriorating the
enamel of the insides.
No additional operation/setting is required in order to operate the
appliance atthe rated frequencies.
• When you place the shelf inside, make sure that the stop is directed
upwards and in the back of the cavity.
The type of powercable mustbe H05V2V2-F.
Anyexcess of spilled materialshould be removed beforecleaning.
The appliance must not be installed behind a decorative door in order
toavoidoverheating.
During the pyrolytic cleaning process, surfaces can heat up more than
usual, childrenmustthereforebe kept at a safe distance.
Failure to comply with the above can compromise the safety of the
appliance and invalidatethe guarantee.
• If the power cable is damaged, it must be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department.
The shelf mustbe inserted completely into the cavity
WARNING: Never removethe ovendoor seal.
Summary
General Instructions
5
1.1 Safety indications
1.2 Electrical safety
1.3 Recommendations
1.4 Installation
1.5 Waste management
1.6 Conformity declaration
2.1 Overview
2.2 Accessories
2.3 First use
Product Description
7
3.1 Display description
3.2 Cooking modes
Use of the Oven
8
4.1 General notes on cleaning
4.2 Pyrolysis
4.3 Maintenance
• Removal and cleaning of grills
• Removal of the oven window
• Removal and cleaning of the glass
door
• Changing the bulb
Oven Cleaning and Maintenance
11
5.1 F.A.Q.
Troubleshooting
14
EN 04
1. General Instructions
NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the
model you havepurchased.
We thank you for choosing one of our products. For the
best results with your oven, you should read this
manual carefully and retain it for future reference.
Before installing the oven, take note of the serial
number so that you can give it to customer service staff
if any repairs are required. Having removed the oven
from its packaging, check that it has not been damaged
during transportation. If you have doubts, do not use
the oven and refer to a qualified technician for advice.
Keep all of the packaging material (plastic bags,
polystyrene, nails) out of the reach of children. When
the oven is switched on for the first time, strong
smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven
heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to
dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where
the instructions contained in this document are not observed.
1.1 Safety Indications
Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for
example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot
be held responsible foranydamageresultingfrom improper, incorrectorunreasonableusage.
- do not touchtheappliance with wet or damp hands or feet;
- in case of malfunctionand/orpoor operation,switch offtheappliance and do nottamperwithit.
The use of anyelectricalapplianceimpliesthe observance of some fundamental rules:
- do not pullon the power cable to disconnect the plug fromthesocket;
- in general the use of adaptors, multiplesockets andextensioncablesisnot recommended;
1.2 Electrical Safety
WARNING
The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of
the power supply.
ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.
The power supply to which the oven is connected must conform with the laws in force in the country of
installation.The manufactureracceptsno responsibilityforany damage caused by the failuretoobserve
these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a
disconnector with multiple poles, depending on the laws in force in the country of installation. The
electrical supply should be protected with suitable fuses and the cables used must have a transverse
section that can ensure correctsupplytothe oven.
The oven is supplied with a power cable that should only be connected to an electrical supply with 220-
240 Vac 50 Hz power between the phases or between the phase and neutral. Before the oven is
connectedtotheelectricalsupply, it is important to check:
Before connecting the oven to the powersupply, ask a qualified electrician to check the continuity of the
power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other
problems caused by failure to connect the oven to the earth terminal or by an earth connection that has
defective continuity.
- the setting of the disconnector.
CONNECTION
- power voltageindicatedonthe gauge;
EN 05
1.3 Recommendations
Aftereach use of theoven,a minimum of cleaning will help keepthe ovenperfectly clean.
Do not line the oven walls with aluminium foil or single-use protectionavailable from stores. Aluminium
foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the
enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong
smokey smells, we recommend not using the oven at very high temperature. It is better to extend the
cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,
weadvise you only use dishes and baking moulds resistant toveryhigh temperatures.
1.4 Installation
The oven can be located high in a column or under a worktop. Before fixing, you must ensure good
ventilation in the oven space to allow proper circulation of the fresh air required for cooling and
protecting the internalparts. Make the openings specifiedon last page accordingtothe type of fitting.
The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required
to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The
installation instructions for professionally qualified personnel must be followed. Incorrect installation
may cause harm or injury to people, animals or belongings. The manufacturer cannot be held
responsiblefor such harm or injury.
NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available
so that the oven can be connected to this if it is removed from the space in which it is installed. The
power cable must only be substituted by technical service staff or by technicians with equivalent
qualifications.
1.5 Waste management and environmental protection
- the WEEE should be taken to dedicated collection areas managed by the town council or a registered
company.
- the WEEE shouldnot be treatedas domesticwaste;
This appliance is labelled in accordance with European Directive 2012/19/EU regarding
electric and electronic appliances (WEEE). The WEEE contain both polluting substances
(that can have a negative effect on the environment) and base elements (that can be
reused). It is important that the WEEE undergo specific treatments to correctly remove and
dispose of the pollutants and recover all the materials. Individuals can play an important
role in ensuring that the WEEE do not become an environmental problem; it is essential to
follow a fewbasicrules:
In many countries, domestic collections may be available for large WEEEs. When you buy a new
appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as
long as the applianceis of an equivalent type and has the same functions as the purchasedappliance.
SAVING AND RESPECTINGTHE ENVIRONMENT
Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently
as possible, because heat from the cavity disperses every time it is opened. For a significant energy
saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and
use the residual heat that the ovencontinues togenerate.Keeptheseals clean and inorder, to avoid any
heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed
cooking" programme makes energy saving more simple, moving the cooking process to start at the
reducedtariff time slot.
1.6 Declaration of compliance
By placing the mark on this product,we are confirming compliance to all relevant European safety,
health and environmental requirementswhichareapplicablein legislationforthisproduct.
The parts of this appliance thatmaycomeinto contactwith foodstuffs comply with the provisionsofEEC
Directive89/109.
EN 06
2. Product Description
2.1 Overview
1
2
3
5
4
6
1. Control panel
2. Shelf positions
(lateral wire grid if included)
3. Metal grill
4. Drip pan
5. Fan (behind the steel plate)
6. Oven door
2.2 Accessories
Metal grill
1
Drip pan
2
Holds baking trays and plates.
Collects the residues that drip during the cooking
of foodson the grills.
EN 07
Lateral wire grids
3
Lateral wire grid if included.
Measures the internal temperature of food
during cooking. Insert the meat-probe into the
hole on the topofthe cavity.
Do not insertthe meat probein the frozen food.
Prepare the food and properly insert the meat
probe into the food. Do not preheat or start
cooking before properly inserting the meat
probe. Probe should be inserted into the food and
receptacle while the ovenisstillcool.
– Do not leave the meat probe inside the oven when
it's not used: it could damage.
4
Meat-probe (depends on the oven model)
1
2
3
4
5
6
7
2.3 First Use
PRELIMINARYCLEANING
Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash
all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the
empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering
smells of newness.
3. Use of the Oven
3.1 Display description
3. Defrost mode
6. Function selector knob
7. Programme selector knob
1. Timer/automatic mode
2. Fan function
5. LCD display adjustment controls
4. Temperature or clock display
200°-> The temperature LED “°” flashes until the
displayed temperature is reached.
The first operation to carry out after installation,
or after a power cut, is to set the time of day (a
power cut has occured if the display is flashing
12:00).
WARNING!
HOT -> When a programme finishes, if the oven is
still hot, the display shows "HOT", alternating with
the time, even if the knobs are positioned to OFF.
EN 08
FUNCTION HOW TO ACTIVATE
HOW TO
DEACTIVATE
WHAT IT DOES WHY IT IS NEEDED
• Enables you to turn off
the sound of the minute
minder.
• Rotate the function
selector to the position
OFF.
• To turn off the sound of the
minute minder
• Enables you to set the
time which appears on
the display
• Rotate the function
selector to the position
OFF.
• Turn the right function
selector to a cooking
function
• Rotate the left function
selector to the position
"End of cooking"
• Set the end time of
cooking by using buttons
" + " and " - "
• Lighting Auto appears
• It allows to preset the end
of cooking time you want.
• When the cooking time is
set, turn the function
selector to OFF to go back
to actual time.
• To view the cooking time
selected, turn the left
function selector to End of
cooking Time
• When the cooking time
has elapsed, the oven
switch off automatically.
• To stop the cooking
functions early, turn the
function control to OFF
• Turn the left function
selector to the position
Minute Minder.
• Set the time of cooking
by using buttons
“+”and “-”
• Allow to use the oven as
alarm even if the oven is
switch off
• The oven cannot be used.
SILENCE
MODE
COOKING
DURATION
END OF
COOKING
MINUTE
MINDER
CHILD
SAFETY
LOCK
" Silence mode “
• Rotate the left function
selector to the position
• To set the time
NB : Set the time when you
first install your oven or just
after a black out (the clock is
showing a pulsating 12.00)
selector to a cooking
• Lighting Auto appears
• Rotate the left function
by using buttons " + " and
• Turn the right function
function
• Set the time of cooking
" - "
selector to the position
"Cooking Time Duration”
•When the cooking time
has elapsed, the oven
switch off automatically
and the alarm rings for
few seconds To stop the
cooking functions early,
turn the function control
to OFF or set the time on
00.00; by rotating the
function selector to
Cooking Time Duration
and by using the buttons "
+ " and " - “
the recipe chosen.
cooking time required for
set, turn the function
selected, turn the left
function selector to
• It allows to preset the
to actual time.
• When the cooking time is
• To view the cooking time
selector toOFF to go back
Cooking Time duration.
•This function is normally
used with the COOKING
DURATION function
•For example, the desired
food needs to cook for 45
minutes and I want it to be
ready for 12.30; in this case: at
the end of the set time, the
oven automatically switches
off and an alarm sounds.
Select the desired cooking
function. Set the cooking
duration to 45 minutes (“-”
“+”). Set the end of cooking to
12:30 (“-” “+”). Cooking will
automatically begin at 11:45
(12:30 minus 45 minutes), at
the end of the set cooking
time, the oven will
automatically switch off.
WARNING: by setting only the
end of cooking time, and not
the cooking duration, the oven
will immediately switch on
and switch off at the end of
the set cooking time.
selector to the position
Minute Minder, and using
• Set the time on 00.00 by
turning the left function
the button " - “
selector to the position
Child lock.
• Press the button " + "
• Turn the left function
during 5 seconds
• Child lock is available
when " STOP " appears
on display
• Turn back the left
function selector to Child
lock and press button " +
" during 5 seconds.
• Indication STOP
disappears.
• Use the buttons " + " or
selector to the position
" - " to set the time
• Rotate the left function
“Set the time”.
• For cooking the desired
recipes.
•During operation, the
display shows the
remaining time.
•Emits an audible signal at
the end of a set time.
• This function is useful
when there are children in
the house.
SET
THE TIME
EN 09
T °C
default
180
220
210
200
210
ECO
40
L3
T °C
range
40 ÷ 40
50 ÷ 240
50 ÷ 280
50 ÷ 230
150 ÷ 220
50 ÷ 240
ECO÷SUPER
L1 ÷ L5
Function
Dial
Function
LAMP: Turns on the oven light.
PYROLYSIS
GRILL ()Depends on the oven model : usethegrillwiththe door closed.
The top heating element is used alone and you can adjust the temperature.
Five minutes preheating is required to get the elements red-hot. Success is
guaranteed for grills, kebabs and gratin dishes. White meats should be put at a
distance from the grill; the cooking time is longer, but the meat will be tastier.
You can put red meats and fish fillets on the shelf with the drip tray
underneath.The ovenhas two grill positions:
Grill: 2140 W Barbecue: 3340 W
GRILL + FAN : use the turbo-grill with the door closed.
The top heating element is used with the fan circulating the air inside the oven.
Preheating is necessary for red meats but not for white meats. Ideal for
cooking thick food items, whole pieces such as roast pork, poultry, etc. Place
the food to be grilled directly on the shelf centrally, at the middle level. Slide
the drip tray under the shelf to collect the juices. Make sure that the food is not
tooclose to the grill. Turn the food over halfwaythroughcooking.
MULTI-LEVEL: We recommend you use this method for poultry, pastries, fish
and vegetables. Heat penetrates into the food better and both the cooking and
preheating times are reduced. You can cook different foods at the same time
with or without the same preparation in one or more positions. This cooking
method gives even heat distribution and the smells arenot mixed.
Allow about ten minutes extrawhen cookingfoodsat the same time.
CONVECTION: Both top and bottom heating elements are used. Preheat the
oven for about ten minutes. This method is ideal for all traditional roasting and
baking. For seizing red meats, roast beef, leg of lamb, game, bread, foil
wrapped food (papillotes), flaky pastry. Place the food and its dish on a shelf in
mid position.
DEFROST: When the dial is set to this position. The fan circulates air at room
temperature around the frozen food so that it defrosts in a few minutes
without the proteincontentof the food being changed or altered.
3.2 Cooking Modes
BOTTOM HEATING + FAN: The bottom heating element is used with the fan
circulatingthe air inside the oven. This method is ideal for juicy fruit flans, tarts,
quiches and pâté. It prevents food from drying and encourages rising in cakes,
bread dough and other bottom-cooked food. Place the shelf in the bottom
position.
*
EN 10
KEEP WARM: This is recommended to reheat precooked foodstuff, positioning
the shelf on the second level from top, or to defrost bread pizza or pastry by
positioning the shelf on the lower level. The temperature is preset in 60°C
constant, no regulationis possible.
60 60 ÷ 60
*Tested in accordance with the CENELEC EN 60350-1
**Tested in accordance with the CENELEC EN 60350-1 used for definition of energy class.
**
4. Oven cleaning and maintenance
4.1 General notes on cleaning
GLASS PARTS
Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive
detergents.
The lifecycle of the appliance canbe extended throughregular cleaning. Waitfor the oven to cool before
carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for
cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based
detergents (ammonia).
If dirty, theseal can be cleaned witha slightly damp sponge.
If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan
in the dishwasher or use a commercialoven detergent. Neverput a dirty pan back intothe oven.
After using the grill, remove the pan from the oven.Pourthe hot fat into a container and wash the pan in
hot water, using a spongeand washing-upliquid.
It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To
remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse
with water.
ACCESSORIES
DRIP PAN
OVENWINDOW SEAL
4.2 Pyrolysis
•Remove any large spillages or stains as it would take too long to destroy them. Also excessively
large amounts of grease could ignite when subject to the very high temperatures of the Pyrolytic
cycle.
•Close the oven door.
Before executing a pyrolytic cycle:
TWOPYROLYTIC CYCLE are pre-set:
NOTE: If a hob has been fitted abovethe oven,neveruse the gas burnersor the electric hot-plates while
the Pyrolyser is working, this will prevent thehob fromoverheating.
Do not place tea towels.
Clean the ovendoor;
Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use
detergents;
Neveruse commerciallyavailablecleaning productson a Pyrolyticoven!
Tip : Carrying out Pyrolytic cleaning immediately after cooking allows you to take advantage of residual
heat,thus savingenergy.
Removeall accessories and the sliding rackkit (where present);
ECOPYROCLEAN : Cleans a moderately stained oven.Operates for a period of 90 minutes.
The oven is equipped with a pyrolyser cleaning system, which destroys food residues at high
temperature. The operation is carried out automatically by means of the programmer. The resulting
fumes are rendered “clean” by passing over a Pyrolyser wich starts as soon as cooking begins. As very
high temperatures are required by the Pyrolyser, the oven door is fitted with a safety lock. The pyrolyser
canbe stoppedat any time. The door cannot be opened until the safety lock is displayed.
SUPER PYROCLEAN: Cleans a heavilystainedoven. Operatesfor a period of 120 minutes.
•Remove all the accessories from the oven because they are not able to tolerate the high
temperatures used during the pyrolytic cleaning cycle ; in particular removing grids, side racks and
the telescopic guides (refer to the chapter REMOVING GRIDS AND SIDE RACKS) . In ovens with meat
probeit is necessary, beforemaking the cleaning cycle , close the hole with the nut provided.
•Excessspillage must be removed beforecleaning.
EN 11
1- Rotate the functionselectorintoposition pyrolisys. The displaywill showeither "ECO"or "SUP“
Using the pyrolitic cycle:
2- It is possible to defer the start time of the pyroclean cycle by changing the END time via the
programmer.
1- Rotate the function selector to the position " ". On the display, appearsthe indication " ECO " or
" SUP ". The preset time is 90 min, this can be varied from 90 min (Eco mode) to 120 min (Sup mode) via
the programmer (setting button" + " or " - "). If the oven is verydirty, it is recommendo increasethe time
to90 min, if theovenis moderately dirty reducethe cleaningcycletime to 90 min.
3- After few minutes, when the oven reaches a high temperature, the door locks automatically. The
pyrocleancycle can be stopped at any time by turning the function selector back to'0' (the word OFF will
be displayedfor3 seconds).
4 - Once the pyroclean cycle is finished, the pyrolysis will switch off automatically. On the display
appearsthe indication "END" until the door is lockedthen "0--n".
5- You can turn the function selector back to " 0 " but if the temperaure is still high, the "0--n " indication
appearsto informthat the door is locked.
Use of the pyrolyticcycle in Touch Control ovens:
2- The pre-set time is 690 minutes but it can be varied from 90 min. (Eco mode) to 120 min. (Sup mode)
using the programmer (" +" or "-" key). If the oven is very dirty, the time should be increased to 120 min.,
while if the ovenis only a slightly dirty, reduce the cleaningcycle to 90 min.
2. Removethe side racks bypulling them towardsyou.
3. Clean the sideracksin a dishwasheror with a wet sponge and then dry them immediately.
4. Having cleaned the side racks, put them back in and reinsert the bolts, ensuring that they are fully
tightened.
1. Unscrew the bolt in an anti-clockwise direction.
REMOVAL AND CLEANINGOF THE SIDE RACKS
4.3 Maintenance
A
3. Replacethe window by carrying out theprocedure in reverse.
1. Open the front window.
2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them
downwards.
REMOVAL OF THE OVEN WINDOW
EN 12
1
2
3
1.
2.
3.
4.
5.
6.
7.
REMOVAL AND CLEANINGOF THE GLASS DOOR
1. Open the ovendoor.
2.3.4. Lock the hinges,remove the screwsand removethe uppermetalcover by pulling it upwards.
5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove
the second and third glass (if present)).
7. Atthe end of cleaning or substitution,reassemble the parts inreverse order.
On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the
left-handlateralhinge. In this way, the printedlabel of thefirst glass will beinside the door.
EN 13
LOW-E
CHANGING THE BULB
1. Disconnect the oven from the mains supply.
2. Undo the glasscover, unscrew the bulb and replaceit witha new bulb ofthe same type.
3. Once the defective bulb is replaced,replace the glass cover.
5. Troubleshooting
5.1 FAQ
PROBLEM POSSIBLE CAUSE SOLUTION
The oven does not heat up
The clock is not set Set the clock
The child lock is on
A cooking function and
temperature has not been set
Deactivate the child lock
Ensure that the necessary
settings are correct
The oven does not heat up
The oven does not heat up
EN 14
FR 15
Conseils De Sécurité
Pendant la cuisson de l’humidité peut se créer dans la cavité ou sur la
surface de la porte. Le cas décrit est normal. Si on veut reduire cet effet, il
faut laisser réchauffer le four 10-15 minutes avant d’introduire les
aliments. L’humidité va disparaître grâce à la juste température de cuisson.
Le nettoyage et l'entretien par l'utilisateur ne doit pas être fait par des
enfants sans surveillance.
En cours d'utilisation l'appareil devient chaud. Des précautions doivent
être prises pour éviter de toucher les éléments chauds à l'intérieur du
four.
Ne pas utiliser de nettoyantsvapeurpour le nettoyage.
Nous vous conseillons de faire la cuisson des légumes dans un
récipient aveccouvercle pas sur un plateau.
Une fois que la cuisson est terminée, nous vous conseillons de ne pas
laisser les alimentsà l’intériorde la cavité pour plus de 15/20 minutes.
ATTENTION : les parties accessibles peuvent devenir très chaudes
quand le four est en marche. Les enfants doivent être tenus à une
distance de sécurité.
AVERTISSEMENT: L'appareil et les parties accessibles deviennent
chauds pendant l'utilisation. Des précautions doivent être prises pour
éviterde toucher les éléments chauffants.
Cet appareil n'est pas destiné à être utilisé par des personnes (y
compris les enfants) dont les capacités physiques, sensorielles ou
mentales sont réduites, ou ayant un manque d'expérience et de
connaissances, à moins qu'elles n'aient été formées à l'utilisation de
l'appareil,par une personneresponsablede leur sécurité.
Les enfants ne doiventjouer avecl'appareil.
AVERTISSEMENT: Les parties accessibles peuvent devenir chaudes
pendantl'utilisation. Les jeunes enfants doiventêtretenus à l'écart.
Ne pas utiliser de nettoyants abrasifs ou de racloirs métalliques
tranchantspour nettoyer la vitre de la porte du four car ils peuvent rayer
la surface, entrainant des risques d'explosion.
Le four doit être éteint avant d'enlever la protection et après le
nettoyage, la protection doit être replacéen respectantles instructions.
Utiliser seulement la sonde de température recommandée pour ce
four.
Brancher le câble d’alimentation sur une prise de courant qui supporte
le voltage ; le courant et la charge sont indiqués sur l’étiquette ; vérifier la
présence d’une mise à la terre. La prise d’alimentation doit supporter la
charge indiquée sur l’étiquette et être dotée d’une mise à la terre en état
FR 16
Le plateaudoit complètement êtreinséré dans la cavité
AVERTISSEMENT : Ne tapissez pas les parois du four avec du papier
aluminium ou un autre matériau de protection jetable en vente dans le
commerce. Tout papier aluminium ou autre matériau de protection qui
entrerait au contact direct de l'émail chaud risquerait de fondre et de
détériorer l'émail intérieurdu four.
AVERTISSEMENT: Ne retirez jamais le jointde la porte du four.
Si le câble d’alimentation est endommagé, il doit être remplacé par un
câble ou un faisceau de câbles spécial disponible auprès du fabriquant
ou en contactantle service après-vente.
de fonctionnement. Le conducteur de mise à la terre est jaune et vert.
Cette opération doit être exécutée par du personnel qualifié. En cas
d’incompatibilité entre la prise d’alimentation et la fiche du câble de
l’appareil, demander à un électricien professionnel de remplacer la prise
d’alimentation par un dispositif compatible. La fiche du câble
d’alimentation et la prise d’alimentation doivent être conformes aux
normes en vigueur dans le pays d’installation. Il est possible de brancher
l’appareil à la prise d’alimentation en installant un disjoncteur multipolaire
qui supporte la charge électrique maximale, conformément aux lois en
vigueur, entre l’appareil et la prise d’alimentation. Le conducteur jaune et
vert de mise à la terre ne doit pas être bloqué par le disjoncteur. La prise
d’alimentation ou le disjoncteur multipolaire utilisé pour le branchement
doit rester à tout moment accessible lors de l’installation de l’appareil.
• Le débranchement doit se faire en accédant à la prise d’alimentation
ou en prévoyant un interrupteur sur le circuit électrique fixe, conforme
aux normes électriques.
Le câbled’alimentationrequisest le H05V2V2-F.
Le non-respect des consignes ci-dessus peut compromettre la sécurité
de l’appareil et annuler la garantie.
Toutproduitdéver en quantité doit êtreéliminé avantle nettoyage.
Pendant le nettoyage à pyrolyse, les surfaces peuvent devenir beaucoup
plus chaude que d’habitude, les enfants doivent donc être tenus à une
distance de sécurité.
En introduisant le plateau dans le four, s’assurer que le stop est dirigé
vers le haut et au fond de la cavité.
Ne pas installer l’appareil derrière une porte décorative, pour éviter la
surchauffe.
Aucun réglage/opération supplémentaire n’est requis pour faire
fonctionner l’appareil aux fréquencesnominales.
SOMMAIRE
Instructions Générales
18
1.1 Indications de sécurité
1.2 Sécurité électrique
1.3 Recommandations
1.4 Installation
1.5 La gestion des déchets et la
protection de l'environnement
1.6 Déclaration de conformité
2.1 Vue d'ensemble
2.2 Accessoires
2.3 Première utilisation
Description du produit
20
3.1 Description de l'affichage
3.2 Mode de cuisson
Utilisation du Four
22
4.1 Remarques générales concernant
le nettoyage
4.2 Pyrolyse
4.3 Entretien
• Retrait et nettoyage des grilles
• Retrait de la porte du four
• Retrait et nettoyage des vitres
• Remplacement de l'ampoule
Nettoyage du four et
maintenance
25
5.1 F.A.Q.
Dépannage
28
FR 17
1. Instructions générales
Nous vous remercions d'avoir choisi un de nos produits.
Pourobtenir les meilleursrésultats avecvotre four, vous
devezlire attentivement ce manuel et le conserver pour
toute consultation ultérieure. Avant d'installer le four,
notez le numéro de série, il vous sera demandé par le
support technique si des réparations sont nécessaires.
Après avoir enlevé le four de son emballage, vérifiez
qu'il n'a pas été endommagé pendant le transport. Si
vous avez des doutes, ne pas utiliser le four et se référer
à un technicien qualifié pour obtenir des conseils.
Conservez tous les matériaux d'emballage (sacs en
plastique, polystyrène, clous) hors de la portée des
enfants.Lors de la première utilisation du four, il peut se produire un dégagement de fumée âcre
provoqué par le premier échauffement de la colle des panneaux d’isolation enveloppant le four. Ce
phénomène est normal. Attendez que la fumée cesse avant de cuire des aliments. Le fabricant décline
toute responsabilité dans les cas où les instructions contenues dans le présent document ne sont pas
respectées.
REMARQUE: les fonctions du four, les propriétés et les accessoires cités dans ce manuel peuvent varier
selon les modèles.
1.1 Indications de sécurité
L'utilisationde toutappareil électrique implique le respectde certaines règles fondamentales:
- Ne pas toucherl'appareil avecles mains ou les piedsmouillés ou humides;
Utilisez uniquement le four à sa destination, qui est seulement pour la cuisson des aliments; toute autre
utilisation, par exemple comme une source de chaleur, est considérée comme impropre et donc
dangereuse.Le fabricant ne peut être tenu responsable de tout dommage lié à une mauvaiseutilisation
ou a des modifications techniques du produit.
- En général l'utilisationd'adaptateurs, de prises multiples et de rallongesestdéconseillée;
- Ne pas tirersur le fil électrique pour débrancher la prise.
- En cas de dysfonctionnement et / ou de mauvais fonctionnement, éteindre l'appareil et ne pas y
toucher.
1.2 Sécurité électrique
LE BRANCHEMENT ELECTRIQUE DOIT ÊTRE REALISE PAR UN INSTALLATEUR AGREE OU UN
TECHNICIENDE E.QUALIFICATION SIMILAIR
L'alimentation électrique à laquelle le four est connecté doit être conforme aux lois en vigueur dans le
pays d'installation. Le fabricant décline toute responsabilité pour tout dommage causé par le non
respect de ces instructions. Le four doit être raccordé à l'alimentation électrique avec une prise murale
reliée à la terre ou par l'intermédiaire d'un dispositif à coupure omnipolaire, selon les lois en vigueur
dans le paysd'installation. L'alimentation électrique doit êtreprotégéepar des fusibles appropriéset les
câblesutilisés doiventavoir une section transversale qui peut assurerune alimentationnormale du four.
Le fil de protection du cordon (vert/jaune) relié à la Borne Terre de l’appareil doit être relié à la Borne
Terre de l’installation.
- Le réglage du dijoncteur.
CONNEXION
- La tension d'alimentationindiquée surle compteur;
Le four est livré avec un câble d’alimentation permettant le raccordement sous une tension électrique
de 230 V entre les phases ou entre phase et neutre. Le raccordement devra être effectué après avoir
vérifié:
FR 18
1.3 Recommandations
Afin d'éviter les salissures excessives de votre four ainsi que les fortes odeurs de fumée pouvant en
résulter, nous recommandonsde ne pas utiliser lefourà trop fortetempérature. Ilestpréférablede
Après chaque utilisation du four, réaliser un petit entretien qui favorisera le nettoyage parfait du four.
Ne pas tapisser les parois du four avec des feuilles en aluminium ou des protections jetables du
commerce. La feuille d'aluminium ou toute autre protection, en contact direct avec l'émail chauffé,
risque de fondre et de détériorer l'émail du moufle. Avant installation de l'appareil, il faut relever le
numérode sérieet le noter ci-dessous en cas d'éventuelledemande d'intervention.
rallonger le temps de cuisson et de baisser la température. Nous vous conseillons de n'utiliser que des
plats,des moules à pâtisserie résistants àde très hautes températures.
1.4 Installation
La mise en service de l’appareil est à la charge de l’acheteur, le constructeur est dégagé de ce service.
Les pannes liées à une mauvaise installation ne seront pas couvertes par la garantie. Une mauvaise
installation peut provoquer des dommages aux personnes, aux animaux domestiques; dans ce cas la
responsabilité du constructeur ne peut être engagée. L'installation du four doit être réalisée par un
installateuragréé ou un techniciende qualificationsimilaire.
Le four peut être placé en hauteur dans une colonne ou enchâssé sous un plan de travail. Avant sa
fixation: il est indispensable d'assurer une bonne aération dans la niche d'encastrement afin de
permettre la bonne circulation de l'air frais nécessaire au refroidissement et à la protection des organes
intérieurs. Pour cela, réaliser les ouvertures spécifiéesselon le type d'encastrement (dernière page).
REMARQUE: Le four peut nécessiter une opération de S.A.V. Aussi, placez la prise de courant de façon à
pouvoir brancher le four une fois sorti de sa niche. Câble d'alimentation: si le changement du câble
d'alimentation s'avère nécessaire, nous vous demandons de faire réaliser cette opération par le service
après-vente ou une personnede qualification similaire.
Faire vérifier la continuité de la terre de l’installation avant de procéder au raccordement. Le fabricant
décline toute responsabilité en cas d'accidents ou d'autres problèmes qui pourraient survenir à l'usage
d'un appareilnon relié à la terre, ou reliéà une terre dont la continuitéserait défectueuse.
ATTENTION
1.5 La gestion des déchets et la protection de l'environnement
(DEEE). Les DEEE contiennent à la fois des substances polluantes (qui peuvent avoir des
conséquences négatives sur l'environnement) et des éléments de base (réutilisables). Il est
important de soumettre les DEEE à des traitements spécifiques, en vue d'extraire et
d'éliminer de façon appropriée toutes les substances polluantes, puis de récupérer et
recyclertous les matériaux.
Le présent appareil est marqué conformément à la directive 2012/19/UE relative aux
déchets d'équipements électriques et électroniques
Chacun peut jouer un rôle important quant à la protection de l'environnement contre les DEEE. Pour
atteindre cet objectif, il estimpératifde suivrequelques règlesélémentaires:
• Lorsque vous achetez un nouvel appareil, vous devez retourner l'ancien au vendeur qui le récupère
gratuitement, au cas par cas, à condition que l'équipement soit de type équivalent et possède les
mêmes fonctionsque celui fourni.
• Ils doivent être remis aux points de collecte appropriés gérés par la municipalité ou par des sociétés
immatriculées.Dans plusieurspays,il estpossible de collecterà domicile les DEEE volumineux.
Les DEEE ne doiventpas êtretraitéscomme des déchetsménagers.
FR 19
1 / 1

Hoover HOZ5870IN Instrukcja obsługi

Kategoria
Mikrofale
Typ
Instrukcja obsługi