LG WFS65A00APT Instrukcja obsługi

T

P

roduct Features

Fuzzy logic control

●

A built-in load sensor automatically detects the laundry load and a

microprocessor optimizes washing conditions such as ideal water level

and washing time.

●

Advanced technology is built into the Electronic Control System which

ensures the best washing result.

Turbo drum washing (option)

●

When "Punch + 3" washing wings turn, the washing

tub turns in the opposite direction. This makes the both

sides current of water which improve wash-

performance by rubbing clothes strongly.

Applied models : WF-T

Washer doesn't operate while the lid is open. If the lid is open during the wash,

rinse or spin cycles, the operation stops for safety.

3 Step washing

●

3 step washing makes the best washing performance with low tangling.

START

WASHING

AUTO

POWER

OFF

SENSING

Laundry Sensor

Water Level Sensor

SETTING

Optimum

Washing

Condition

Rubbing

Rubbing and

Shaking

Shaking and

Disentangling

ATTENTION

Be sure to remove the unit from the carton base, otherwise

the machine will not be able to operate properly.

C

ontents

Introduction

Before Starting to Wash

Washing Programs

Additional Function

Options

Installation

Care and Maintenance

Troubleshooting

Terms of Warranty

Specification

Safety Information

Identification of Parts

Function Information

Preparation Before Washing

Use of Water, Detergent, Bleach and Softener

Special Guide for Stain Removal

Function of each Button

Fuzzy Wash (Normal Wash)

Jean Wash

Wool Wash

Speedy Soak Wash

Economy Wash

Delay Start (Reservation) Wash

Option Washing

Other Useful Functions

Placing and Leveling

Connecting Water Supply Hose

Connecting Drain Hose

Grounding Method

Cleaning and Maintenance

Common washing problems

Troubleshooting

Terms of Warranty

Specification

4

5

6

7

8

11

12

14

16

17

18

19

20

23

24

25

27

28

29

30

READ THIS MANUAL

Inside you will find many helpful hints on how to use and maintain your washer

properly. Just a little preventive care on your part can save you a great deal of time and

money over the life of your washer. You will find many answers to common problems

in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you

may not need to call for service at all.

Introduction

4

S

afety Information

Read and follow this safety information carefully.

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric

shock, or to prevent property damage, personal injury, or loss of life.

Save these instructions.

WARNING!

WATER HEATER

SAFETY

PROPER

INSTALLATION

YOUR

LAUNDRY

AREA

WHEN USING

THE WASHER

WHEN NOT IN

USE

• Under certain conditions hydrogen gas may be produced in a water heater that has not been

used for two weeks or more. Hydrogen gas can be explosive under these circumstances. If the

hot water has not been used for two weeks or more, prevent the possibility of damage or injury

by turning on all hot water faucets and allowing them to run for several minutes. Do this before

using any electrical appliance which is connected to the hot water system. This simple

procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not

smoke or use an open flame or appliance during this process.

• The base opening must not be obstructed by carpeting when the washing machine is installed on

a carpeted floor.

• Install or store where it will not be exposed to temperatures below freezing or exposed to the

weather.

• Properly ground washer to conform with all governing codes and ordinances. Follow details in

Installation Instructions.

• Must be positioned so that the plug is accessible.

• Keep the area underneath and around your appliances free of combustible materials such as lint,

paper, rags, chemicals, etc.

• Close supervision is necessary if this appliance is used by or near children. Do not allow children

to play on, with, or inside this or any other appliance.

• Use this appliance only for its intended purpose as described in this Owner's Manual.

• Never reach into washer while it is moving. Wait until the machine has completely stopped

before opening the lid.

• Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing

different chemicals can produce a toxic gas which may cause death.

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with

combustible or explosive substances (such as wax, oil, paint, gasoline, dry-cleaning solvents,

kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do

not use or place these substances around your washer or dryer during operation.

• The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully

follow the garment manufacturer's wash and care instructions.

• To minimize the possibility of electric shock, unplug this appliance from the power supply or

disconnect the washer at the household distribution panel by removing the fuse or switching off

the circuit breaker before attempting any maintenance or cleaning.

NOTE: Pressing Power button to turn off does NOT disconnect the appliance

from the power supply.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled,

or has missing or broken parts, including a damaged cord or plug.

• Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break

or rupture should occur. Check the condition of the fill hoses; they may need replacement after 5

years.

• Before discarding a washer, or removing it from service, remove the washer lid to prevent

children from hiding inside.

• Do not attempt to repair or replace any part of this appliance unless specifically recommended in

this Owner's Manual, or in published user-repair instructions that you understand and have the

skills to carry out.

• Do not tamper with controls.

Introduction

I

dentification of Parts

5

Hot

Cold

W

arm

W

A

T

E

R

V

E

L

O

-

E

S

P

R

O

-

G

R

A

M

Hour

W

a

s

h

R

in

s

e

S

p

in

S

p

e

d

y

S

o

a

k

E

x

-L

a

r

g

e

L

a

rg

e

M

e

d

i

u

m

S

m

a

ll

Fuzz

y

E

c

o

n

o

m

y

Jea

n

Woo

l

WATER SUPPLY

HOSE

Make sure the water

does not leak.

POWDER DETERGENT

BOX FOR DELAYED

WASHING

INLET HOLE FOR

BLEACH

Softner will automatically

flow into the tub.

*

SOFTENER

INLET

FUNCTION SELECTOR

TUB

BASE

ADJUSTABLE LEGS

Use to level the washing

machine for correct balance

& spin operation.

Check if the drain hose

is hung up before

operating the

washing machine.

DRAIN HOSE

for pump model

DRAIN HOSE

for non pump model

POWER PLUG

If the supply cord is

damaged, it must be

replaced by the

manufacturer

or its service agents

or similarly qualified

person in order to

avoid a hazard.

LINT FILTER

Clean regularly to stop

linting on the clothes

load.

*

( )

START/PAUSE

BUTTON

Use to start or stop the

washing machine

temporarily.

Drain hose Anti-rat cover (option)

Water supply hoses

or

roro

1 Each for cold and

hot water

Body

Accessories

Part can be different according to the model.

Note

Different types of laundry washing

Washing according to the condition of laundry

Other washing method

Introduction

6

F

unction Information

Our machine provides various washing methods which suits various conditions and

types of laundry.

Fuzzy(Normal) Wash

Jean Wash

Wool Wash

Economy Wash

Speedy Soak Wash

Delay start Wash

Option Wash

Use this Program for everyday washing e.g. sheets, towels, T-shirts.

Use this Program for heavily soiled durable garments e.g. overalls, jeans.

Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed.

Delicate clothes (lingerie, wool, etc.) which may be easily damaged can be washed.

(refer to page14)

The fibers of machine washable woolens have been specifically modified to prevent felting when they are machine washed.

Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them

• Before washing your woolens check the care label for the washing instructions.

• When washing woolens use a mild detergent recommended for washing wool.

• Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.

• To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight. (The heat and

tumble action of a dryer may cause shrinkage or felting of woolen garments.)

Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.

(Ensure that the whole article is suitable for machine washing and not just the backing material.) You may wish to

handwash these articles and place them in the machine to spin dry.

Economy wash can be selected to wash lightly soiled clothes of less than 2.0 kg in a short time.

Speedy Soak Wash is designed to maximize washing performance and can be selected to wash heavily

soiled laundry with Fuzzy or Jean Program.

Delay start Wash is used to delay the finishing time of the operation.

The number of hours to be delayed can be set by the user accordingly.

Spin, Rinse/Spin, Rinse, Wash/Rinse, and Wash only options can selected.

(refer to page17)

(refer to page14)

(refer to page16)

Before Starting to Wash

P

reparation Before Washing

7

• Check all pockets to make sure that they are empty. Things such as nails, hairclips, matches,

pens, coins, and keys can damage both your washer and your clothes.

• Mend any torn garments or loose buttons. Tears or holes may become larger during washing.

• Remove belts, underwires, etc. to prevent damage to the machine or your clothes.

• Pretreat any dirt and stains.

• Make sure the clothes are washable in water.

• Check the washing instructions.

• Remove tissue in pockets.

To get the best results, different fabrics need to be washed in different ways.

• SOIL (Heavy, Normal, Light)

Separate clothes according to the type and amount of soil.

• COLOR (Whites, Lights, Darks) Separate white fabrics from colored fabrics.

• LINT (Lint producers, Collectors) Separate lint producers and lint collectors.

Lint Producers Terry cloth, Chenile, Towels, Nappies, Diapers

Lint Collectors Synthetics, Corduroy, Permanent Press, Socks

WIRE

Sorting

Check before Loading

* Look for a care label on your clothes. This will tell you about the fabric content of your garment

and how it should be washed.

Sort clothes into loads that can be washed with the same wash cycle, water temperature and spin speed.

Care Labels

Use nylon nets for long, delicate items. For laundry with long strings or long length , a net will prevent

tangling during washing.

Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.

Nylon net is not supplied by LG.

Clothes like downs and woollens are light weight, large and float easily. Use a nylon net and

wash them in a small amount of water. If the laundry floats during the wash cycle, it may

become damaged. Use dissolved detergent to prevent the detergent from clumping.

Light and Large-sized clothing

Long laundry items

Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.).

Load Size

The water level should just cover the clothes. Adjust the load size accordingly.

Loosely load clothes no higher than the top row of holes in the washer tub. To

add items after washer has started, press Start button and submerge additional

items. Close the lid and press Start button again to restart.

Loading

• Pretreat shirt collars and cuffs with a pre-wash product or liquid detergent when placing them in the washer.

Before washing treat special stains with bar soaps, liquid detergent or a paste of water and granular detergent.

• Use a pretreat soil and stain remover.

Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.

(For more detail refer to page11)

Pretreatment on stains or heavy soil

Fire Hazard

Never place items in the washer that are

dampened with gasoline or other flammable

fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type

of oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING

Before Starting to Wash

8

se of Water, Detergent, Bleach and Softener

U

• The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning

results. We recommend temperatures of:

- HOT 49~60°C…(120-140˚F) White items, diapers, underclothing and heavily soiled, colorfast items.

- WARM 29~40°C…(85-105˚F) Most items

- COLD* 18~24°C…(65-75˚F) Only very bright colors with light soil.

• When washing in cold water additional steps may be needed:

- Adjust detergent amount and pre-dissolve detergent in warm water

- Pretreat spots and stains

- Soak heavily soiled items

- Use appropriate bleach

* Temperature below 18°C…(65˚F) will not activate laundry additives and may cause lint, residue, poor

cleaning, etc. In addition, detergent manufactures and care labels define cold water as 26~29°C…(80-85˚F).

If the temperature of the water in the tub is too cold for your hands, the detergent will not activate and clean

effectively.

Using Detergent

Detergent

Follow the detergent package directions. Using too little detergent is a common cause of laundry problems.

Use more detergent if you have hard water, large loads, greasy or oily soils or lower water temperature.

Choosing the right detergent

We recommend the use of domestic detergent, (powder, liquid or concentrated). Soap flakes or

granulated soap powders should not be used in your washing machine. When washing woolens

remember to use detergent suitable for washing woolens.

Water temperature

Using Water

• The machine sets the appropriate temperature automatically according to the wash program .

• You can change the water temperature by pressing the WATER TEMP. button.

• This machine detects the quantity of laundry automatically, then sets the water

level and proper amount of detergent.

• When you select a wash program, the water level and amount of detergent (to be used)

will be shown on the control panel.

• The following table shows the amount of water.

• When the water level is automatically detected, it may differ depending on the quantity of laundry even

though the same water level is indicated on the control panel.

• The amount of a cup in the diagram is about 40g for concentrated detergent.

Amount of Water Level

Ex-Large

Large

Medium

Small

(refer to page 12)

Attention

If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown

or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be

necessary for severe cases.

Before Starting to Wash

9

Attentión

Using Detergent

How much detergent

When you select a wash program the water level and the amount of detergent (to be used) will be

shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated

detergent.

The correct amount of detergent will vary depending on the amount of soil in your clothes (Jeans

and work cloches may need more detergent, while bath towels usually need less.).

For liquid and concentrated detergents, follow the recommendations of the detergent manufacturer.

Note: To check you are using the correct amount of detergent, lift the lid of your machine

about half-way through the wash. There should be a thin layer of foam over the surface of the

water. Lots of foam may look good, but it does not contribute to cleaning your clothes. No

foam means not enough detergent has been used; soil and lint can settle back on the clothes or

the washing machine.

If excess detergent is used, the rinse will not be as clean and efficient. Also, it could cause

environmental pollution, so use it accordingly.

Dónde

deposita el

detergente

Dispensador de detergente en polvo.

Adding the detergent

Open the detergent dispenser and deposit the appropriate

amount of detergent

where you deposit the detergent

Powder Detergent dispenser.

Some detergents MUST be fully dissolved before

adding to your machine to get the best wash results.

Check the instructions on the detergent packet.

If you use powdered detergent it is essential that the required amount be fully dissolved in very hot water

before being added to warm or hot water for the actual wash.

Pre-dissolving detergent in warm water when washing in cold water can improve its performance.

Where you

deposit the

detergent

Powder Detergent Box

( )

• Check clothing care label for special instructions and separate the

laundry to be bleached

• Dilute liquid chlorine bleach.

• Measure the recommended amount of liquid bleach carefully

following instructions on the bottle.

• Before starting the washer, pour measured amount of bleach directly

into bleach dispenser. Avoid splashing or overfilling. Powdered

bleach should be mixed with water before pouring.

Using Liquid Bleach

Bleach dispenser

( )

Attention

■ Never pour undiluted liquid bleach directly onto clothes or into the wash basket.

This may cause change of color or damage the laundry.

■ Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing can reduce

a toxic gas which may cause death.

■ Do not pour powdered bleach into bleach dispenser.

Before Starting to Wash

10

se of Water, Detergent, Bleach and Softener

U

Using Fabric Softener

If you wish to use fabric softener we recommend

Attention

■ Do not mix with detergent or bleach.

■ Never pour fabric softener directly on clothes. It may stain them.

■ Do not stop the washer during the first spin for timely dispensing.

■ Option washing is not designed to be used with fabric softener dispenser.

• Dilute fabric softener with water.

Undiluted fabric softener may result in spots that look like oil

stains.

• Measure and add the recommended amount of fabric softener

into the compartment marked with this symbol( ).

Follow manufacturer’s direction.

 Fabric softener is automatically dispensed in the final rinse

with indication beep.

 If you want extra rinse, you must add fabric softener

manually when indication beep rings in the final rinse.

This maximize the fabric softener function.

• Do not overfill. The dispenser hold max 35mL.

Never add more than 35mL.

Overfilling can cause early dispensing of the fabric softener

which could result in stained clothes. A cup with a pouring spout will help you avoid spilling.

• The effect of adding fabric softener may vary according to its viscosity. The stickier fabric softener makes its

effect the lower. For a sticky fabric softener it is recommended that it be diluted with water, then be manually

put during the time when the washer beeps several times before the final rinse. This function informing

correct time to dispense manually is optionally applied to some models. Please keep it in mind that fabric

softener has to be diluted with water before dispensed and never poured directly on clothes.

Scrud(Waxy Build up)

Softener dispenser ( )

or

Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener

comes into contact with detergent. This build-up is not brought about by a fault in the machine.

If scrud is allowed to build-up in the machine it can result in stains on your clothes or an unpleasant

smell in your washer.

• Using fabric softener sparingly.

• When filling the dispenser, do not splash or overfill.

• Clean dispenser as soon as the cycle is finished.

• Clean your machine regularly. (refer to page 26)

• Cold water washing increases the chance of this build-up occurring. We recommend a regular warm or hot

wash e.g. every 5th wash should be at least a warm one.

• Fabric softener of thinner consistency is less likely to leave residue on the dispenser and contribute to a

build-up.

Before Starting to Wash

S

pecial Guide for Stain Removal

11

• Remove stains promptly.

• Determine the kind of stain, then follow the recommended treatment in the stain

removal chart below.

• To pretreat stains, use a prewash product, liquid detergent, or a paste made from

granular detergent and water.

• Use cold water on unknown stains because hot water can set stains.

• Check care label instructions for treatments to avoid on specific fabrics.

• Check for colorfastness by testing stain remover on an inside seam.

• Rinse and wash items after stain removal.

For successful stain removal:

Follow fabric care label

instructions

■

Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or

products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.

■

To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:

• Read and comply with all instructions on stain removal products.

• Keep stain removal products in their original labeled containers and out of children’s reach.

• Thoroughly wash any utensil used.

• Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.

• Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents

or other flammable or explosive substances because they give off vapors that could ignite or explode.

• Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.

WARNING

Stain Removal

STAIN

Adhesive tape, chewing gum,

rubber cement

Baby formula, dairy products, egg

Beverages (coffee, tea, soda, juice,

alcoholic beverages)

Blood

Candle wax, crayon

Chocolate

Collar or cuff soil, cosmetics

Dye transfer on white fabric

Grass

Grease, oil, tar (butter, fats, salad

dressing, cooking oils, car grease,

motor oils)

Ink

Mildew, scorch

Mud

Mustard, tomato

Nail polish

Paint, varnish

Rust, brown or yellow

discoloration

Shoe polish

Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or

nonflammable dry cleaning fluid.

Use product containing enzymes to pretreat or soak stains.

Pretreat stain. Wash using cold water and bleach safe for fabric.

Rinse with cold water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using bleach

safe for fabric.

Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.

Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning

fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.

Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.

Pretreat with prewash stain remover or rub with bar soap.

Use packaged color remover. Wash using bleach safe for fabric.

Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.

Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply

nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash

using hottest water safe for fabric.

Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured

alcohol or nonflammable dry cleaning fluid.

Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badly

mildewed fabrics may be permanently damaged.

Brush off dry mud. Pretreat or soak with product containing enzymes.

Pretreat with prewash stain remover. Wash using bleach safe for fabric.

May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.

Repeat, replacing paper towels frequently. Do not use on acetate fabrics.

WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,

OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.

For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate detergent and

nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.

LIQUID : Pretreat with a paste of granular detergent and water. PASTE : Scrape residue from fabric. Pretreat with

prewash stain remover or nonflammable dry cleaning fluid. Rub detergent into dampened area, Wash using bleach

safe for fabric.

TREATMENT

For Non-Pump

Washing Programs

14

W

ashing Programs

Washing

Programs

Add

the

laundry

Add

the detergent

Fuzzy Washing

(Normal Wash)

Used for normal loads, this mode

automatically selects the most

appropriate conditions and

completes the sequence in one

operation. The built-in sensor

detects the size of the load and the

ideal wash power and wash, rinse

and spin times are set accordingly

Economy Wash

Use this mode when washing lightly

soiled clothes for a short time. The

highly recommended laundry

amount is under 2.0kg.

Jean Wash

Use Jean program when washing

Jeans of different sizes

Speedy Soak Wash

Use this mode to wash normal

clothes or thick and heavy clothes

which are excessively dirty.

Speedy Soak mode can be used

with Fuzzy or Jean program.

WATER

LEVEL

PRO-

GRAM

WATER

LEVEL

PRO-

CESS

WATER

LEVEL

1

2

5

4

5

6

3

4

2

3

Select the

Economy

program on

the Control

panel.

Add the appropriate

quantity of detergent as

indicated by the water

level next to

Water Detergent.

Or follow the detergent

manufacturer’s

instructions

Add the appropriate

quantity of detergent as

indicated by the water

level next to Water

Detergent.

Or follow the detergent

manufacturer’s

instructions

Select the Jean

program on the

Control panel.

Spread the

jean

evenly in

the tub

Select the

Wool

program on

the Control

panel.

Speedy Soak

will not work in

Wool &

Economy

Program.

Keep pressing the PROCESS button until the Speedy Soak light is

on and then Wash, Rinse, Spin lights are on simultaneously.

Until the washing process is completed, the Speedy Soak light is

on.

Wash

Rinse

Spin

Speedy Soak

Wool Wash

Use this program for washing delicate

fabrics such as lingerie and woolens.

(wash only “water washable” clothes)

Before washing your woolens check

the care label for the washing

instructions.

(wash only water washable clothes)

Use neutral detergent

appropriate for the

laundry.

When washing

woolens use a mild

detergent recommend-

ed for washing wool.

Washing Programs

15

Close the lid Finish Caution & Note

WATER

LEVEL

The pulsator rotates for 8

seconds to detect the

laundry load.

Then the water level and

the amount of detergent to

be used will be shown and

water will be supplied.

Water will be supplied

for 2 minutes after the

start of the wash to

supplement the water

the laundry has

absorbed.

When the wash

program ends, the

buzzer will ring for

10 seconds before

the Power goes off

automatically.

If water is already in the tub, or putting wet

laundry into the tub before starting will

increase the water level.

With lightweight bulky loads, water level can

be set low.

Changes to water temperature (hot/cold) and

wash level are possible during operation.

(refer to page 12)

The water level and the

amount of detergent to be

used will be shown and

water will be supplied.

3

5

6

7

8

7

6

7

4

5

4

When setting the water level manually, do not

set to Medium to prevent damage to laundry.

Washing with hot water may damage the

laundry (Water is set to cold automatically).

Ensure that the load is under 2kg

In order to avoid damage to laundry,

the spin cycle may appear slow.

This also avoids wrinkles and clothing may still

contain some water. This is normal.

Speedy Soak Wash cannot be selected for the

Wool Wash program.

If wool wash is selected, Gentle Spin will be set

automatically.

Additional Function Options

16

D

elay Start (Reservation) Wash

3

Delay Start (Reservation) Wash is used to delay the finishing time of the operation.

The hours to be delayed can be set by the user accordingly.

The time on the display is the finishing time , not the start time.

When you press the START/PAUSE button the light will

blink.

Select the program for laundry on the Control panel.

This program will not work in Wool Program.

• The time changes as following order.

[6 ➔ 9 ➔ 15(6+9) ➔ 6Hours].

Press the POWER button to turn power on.

Press the PROGRAM button to select the washing program.

Add the laundry and press the START/PAUSE button.

WATER

LEVEL

Press the PROGRAM button and the START/PAUSE button

simultaneously.

The appropriate quantity of detergent marked next to the

water level of Water•Detergent.

When the lid is open the machine will not operate, and an

alarm signal will remind you to close the lid

Add the detergent.

Water will be supplied for 2 minutes after the start of the

wash to supplement the water the laundry has absorbed.

Close the lid.

The washing will be finished according to the delayed time.

To select washing program, spinning time, water level or hot/cold manually, press the DELAY START

(RESERVATION) button and select the desired option. Then press the START/PAUSE button.

Finish

When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the

spinning program . (The laundry will be wrinkled if left for a long time after spinning.)

WATER

LEVEL

PRO-

GRAM

WATER

LEVEL

PRO-

GRAM

Note

If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.

1

2

4

5

6

Hour

Additional Function Options

O

ption Washing

17

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set

manually

Press the AUTO OFF (Power) button to turn power on.

Press the PROCESS button until above Option Washing

light is on.

(refer to p13)

When you want to only drain, wait until the water in the

washing tub drains completely and then, turn off the

power.

Wash , Wash+Rinse , Rinse , Rinse+Spin , Spin only options

Add the laundry into the washing tub.

Press the START/PAUSE button.

Press the WATER LEVEL button, to control the water level according to the

amount of laundry. If you do not choose anything, it is set the Large water

level automatically.

Add the detergent and close the lid.

WATER

LEVEL

PRO-

CESS

WATERTER

LEVELLEVEL

WATER

LEVEL

WATER

LEVEL

(refer to page 12)

1

2

3

4

5

6

• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not be

drained off, If you wish to drain the water, press the SPIN button and wait until the water in the tub has drained

completely, Then press the START/PAUSE button.

• If you do not specify the water level, then Medium will be automatically selected.

• If only Rinse is selected, the process will start from Water Supply.

Note

title

18

ther Useful Functions

O

Additional Function Options

After all washing conditions are set according to the manual.

Press the POWER button.

Press the START/PAUSE button to start washing.

WATER

LEVEL

WATER

LEVEL

PRO-

CESS

PRO-

GRAM

During the wash program, all the buttons are locked

until washing is completed or until the child- lock

function is deactivated manually.

Press both the PROCESS button and the PROGRAM button simultaneously.

Turn Power on.

If you want to use the washing machine without alarm signal sounds, press both the WATER LEVEL and

PROCESS buttons simultaneously.

To make buzzer work, press both the WATER LEVEL and PROCESS buttons simultaneously one more

time.

If you want to lock all the keys to prevent settings from being changed by a child, you can use the

child lock option.

If you want to unlock during wash, press both the PROCESS and the PROGRAM button simultaneously

again.

Child Lock Function

Mute Option

How to Lock

How to Unlock

2

1

3

Note

In Child-Lock mode, all process light will blink.

Introduction

P

lacing and Leveling

19

Installation

Caution

Top view of the machine

more than 10 cm

more

than

2 cm

more than

2 cm

Place the machine on a flat and firm surface which allows proper clearance.

We suggest a minimum clearance of 2 cm to the

right side and left sides of the machine for ease of

installation.

At the rear, a minimum clearance of 10 cm is

suggested.

Check that the machine is level

Open the lid and look from above to see if it is

same as shown.

Adjustable legs

Leveling the machine

Lift the front of the washing machine and twist

the Adjustable Leg until the washing machine is

placed evenly.

Installing the Anti-Rat Cover (option) Insert the anti-

rat cover to be firmly fixed from the back or front of

washing machine and screw it (1pcs)

If the power is supplied from a cord extension set or generator, the cord extension set or electrical

portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.

1

2

3

Please ensure that transit restraint has been removed before operating your machine.

Caution

If the washer is installed on a uneven,weak or tilted floor causing excessive vibration,

spin failure error can happen to it.

It must be placed on a firm and level floor to prevent spin failure.

title

20

C

Installation

Before connecting the Water Supply Hose to the water tap, check the hose type and

then choose the correct instruction here under.

Note that the Water Supply Hose supplied may vary from country to country, Make

sure to connect the blue inlet hose to the cold water tap, and the orange inlet hose to

the hot water tap.

Connecting Water Supply Hose to water tap

Connector

Water

Supply Hose

screw

Untighten the screw

Untighten the screw of the connector so that the

tap can be placed in the middle.

Fixing the connector to the tap

Push the upper connector up till the rubber

packing is in tight contact with the tap. Then

tighten the 4 screws.

Attach the water supply hose securely to the

connector

Push the water supply hose vertically upwards so

that the rubber seal within the hose can adhere

completely to the tap.

Check the connection of water supply hose and the connector

After connecting the hose, open the tap to check

for any water leakage.

If the water leaks, close the tap and start again

from step 1

Fixing the connector to the water supply hose

Attach the water supply hose to the connector and

then tighten it by screwing it to the right.

Normal Type

(Normal tap without thread & screw type inlet hose.)

1

2

3

4

5

onnecting Water Supply Hose

Rubber packing

Attention

The washing machine is to be connected to the water mains using new hose-sets and old hose-sets should

not be reused.

Strona jest ładowana ...

LG WFS65A00APT Instrukcja obsługi

LG WFS65A00APT Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty