Yamaha SWR2311P Instrukcja obsługi

Yamaha
Marka
Yamaha
Model
SWR2311P
Typ
Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

L2 SWITCH
SWR2311P-10G
RU
IT
ES
FR
DE
EN
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
Manuale di istruzioni
Руководство пользователя
EnglishDeutschFrançaisEspañolItalianoРусский
2 SWR2311P-10G Owner’s Manual
Explanation of Graphical Symbols
Explication des symboles
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une
« tension dangereuse» non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour constituer un risque d’électrocution.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’instructions
importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation fournie.
IMPORTANT SAFETY
INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
PRÉCAUTIONS CONCER-
NANT LA SÉCURITÉ
1 Lire ces instructions.
2 Conserver ces instructions.
3 Tenir compte de tous les avertissements.
4 Suivre toutes les instructions.
5 Ne pas utiliser ce produit à proximité d’eau.
6 Nettoyer uniquement avec un chiffon propre et sec.
7 Ne pas bloquer les orifices de ventilation. Installer l’appareil
conformément aux instructions du fabricant.
8 Ne pas installer l’appareil à proximité d’une source de chaleur
comme un radiateur, une bouche de chaleur, un poêle ou tout autre
appareil (y compris un amplificateur) produisant de la chaleur.
9 Ne pas modifier le système de sécurité de la fiche polarisée ou de
la fiche de terre. Une fiche polarisée dispose de deux broches dont
une est plus large que l’autre. Une fiche de terre dispose de deux
broches et d’une troisième pour le raccordement à la terre. Cette
broche plus large ou cette troisième broche est destinée à assurer
la sécurité de l’utilisateur. Si la fiche équipant l’appareil n’est pas
compatible avec les prises de courant disponibles, faire remplacer
les prises par un électricien.
10 Acheminer les cordons d’alimentation de sorte qu’ils ne soient pas
piétinés ni coincés, en faisant tout spécialement attention aux
fiches, prises de courant et au point de sortie de l’appareil.
11 Utiliser exclusivement les fixations et accessoires spécifiés par le
fabricant.
12 Utiliser exclusivement le chariot, le stand, le
trépied, le support ou la table recommandés par
le fabricant ou vendus avec cet appareil. Si
l’appareil est posé sur un chariot, déplacer le
chariot avec précaution pour éviter tout risque
de chute et de blessure.
13 Débrancher l’appareil en cas d’orage ou lorsqu’il
doit rester hors service pendant une période prolongée.
14 Confier toute réparation à un personnel qualifié. Faire réparer
l’appareil s’il a subi tout dommage, par exemple si la fiche ou le
cordon d’alimentation est endommagé, si du liquide a coulé ou des
objets sont tombés à l’intérieur de l’appareil, si l’appareil a été
exposé à la pluie ou à de l’humidité, si l’appareil ne fonctionne pas
normalement ou est tombé.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ATTENTION :
POUR RÉDUIRE LES RISQUES D'ÉLECTROCUTION, NE PAS RETIRER
LE CAPOT (OU LE DOS). NE CONTIENT PAS DE PIÈCES NÉCESSITANT
L'INTERVENTION DE L'UTILISATEUR. POUR TOUTE INTERVENTION,
FAIRE APPEL À DES PROFESSIONNELS QUALIFIÉS.
ATTENTION
RISQUE DE CHOC
ELECTRIQUE-NE PAS OUVRIR
The above warning is located on the top of the unit. L’avertissement ci-dessus est situé sur le dessus de l’unité.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
AVERTISSEMENT
POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE
ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À
L’HUMIDITÉ.
SWR2311P-10G Owner’s Manual 3
1. IMPORTANT NOTICE:
DO NOT MODIFY THIS UNIT!
This product, when installed as indicated
in the instructions contained in this man-
ual, meets FCC requirements. Modifica-
tions not expressly approved by Yamaha
may void your authority, granted by the
FCC, to use the product.
2. IMPORTANT: When connecting this
product to accessories and/or another
product use only high quality shielded
cables. Cable/s supplied with this product
MUST be used. Follow all installation
instructions. Failure to follow instructions
could void your FCC authorization to use
this product in the USA.
3. NOTE: This product has been tested and
found to comply with the requirements
listed in FCC Regulations, Part 15 for
Class “A” digital devices. Compliance with
these requirements provides a reason-
able level of assurance that your use of
this product, in a commercial environment,
will not result in harmful interference with
other electronic devices. However, opera-
tion of this product in a residential area is
likely to cause interference in some form.
In this case you, the user, bear the respon-
sibility of correcting this condition.
This product generates/uses radio fre-
quencies and, if not installed and used
according to the instructions found in the
users manual, may cause interference
harmful to the operation of other electronic
devices. Compliance with FCC regulations
does not guarantee that interference will
not occur in all installations. If this product
is found to be the source of interference,
which can be determined by turning the
product “OFF” and “ON”, please try to
eliminate the problem by using one of the
following measures:
Relocate either the product generating the
interference or the device that is being
affected by the interference.
Utilize power outlets that are on different
branch (circuit breaker or fuse) circuits or
install AC line filter/s.
In the case of radio or TV interference,
relocate/reorient the antenna. If the
antenna lead-in is 300 ohm ribbon lead,
change the lead-in to co-axial type cable.
If these corrective measures do not pro-
duce satisfactory results, please contact
the local retailer that is authorized to dis-
tribute this type of product. If you can not
locate the appropriate retailer, please con-
tact Yamaha Corporation of America, Elec-
tronic Service Division, 6600
Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to
those products distributed by Yamaha Cor-
poration of America or its subsidiaries.
(class A)
FCC INFORMATION (U.S.A.)
4 SWR2311P-10G Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY
BEFORE PROCEEDING
Please keep this manual in a safe
place for future reference.
WARNING
Always follow the basic precautions
listed below to avoid the possibility of
serious injury or even death from
electrical shock, short-circuiting,
damages, fire or other hazards. These
precautions include, but are not limited
to, the following:
If you notice any abnormality
• If any of the following problems occur,
immediately disconnect the electric plug
from the outlet.
- The power cord or plug becomes frayed
or damaged.
- Unusual smells or smoke are emitted.
- Some object, or water has been
dropped into the product.
- There is a sudden loss of sound during
use of the product.
- Cracks or other visible damage appear
on the product.
Then have the product inspected or
repaired by qualified Yamaha service
personnel.
Power supply/power cord
• Do not place the power cord near heat
sources such as heaters or radiators, and
do not excessively bend or otherwise
damage the cord, place heavy objects on
it, or place it in a position where anyone
could walk on, trip over, or roll anything
over it.
• Only use the voltage specified as correct
for the product. The required voltage is
printed on the name plate of the product.
• Use only the supplied power cord/plug.
If you intend to use the product in an area
other than in the one you purchased, the
included power cord may not be
compatible. Please check with your
Yamaha dealer.
• Check the electric plug periodically and
remove any dirt or dust which may have
accumulated on it.
• Make sure to fully insert the electric plug
to prevent electric shocks or fire.
• When setting up the product, make sure
that the AC outlet you are using is easily
accessible. If some trouble or malfunction
occurs, immediately disconnect the plug
from the outlet. As long as the power cord
is not unplugged from the wall AC outlet,
the product will not be disconnected from
the power source.
• Remove the electric plug from the outlet
when the product is not to be used for
extended periods of time.
• Do not touch the product or the electric
plug during an electrical storm.
• Be sure to connect to an appropriate
outlet with a protective grounding
connection. Improper grounding can
result in electrical shock, fire, or damage.
• If you plan to connect a powered device
that complies with the IEEE802.3 at
standards, use a CAT5e or higher-grade
cable. Failure to observe this precaution
could result in a fire or malfunction.
English
SWR2311P-10G Owner’s Manual 5
Do not open
• This product contains no user-serviceable
parts. Do not attempt to disassemble the
internal parts or modify them in any way.
Water warning
• Do not expose the product to rain, use it
near water or in damp or wet conditions,
or place on it any containers (such as
vases, bottles or glasses) containing
liquids which might spill into any
openings.
• Never insert or remove an electric plug
with wet hands.
• Do not place any burning items or open
flames near the product, since they may
cause a fire.
Hearing loss
• When turning on the AC power in your
audio system, always turn on the power
amplifier LAST, to avoid hearing loss and
speaker damage. When turning the
power off, the power amplifier should be
turned off FIRST for the same reason.
CAUTION
Always follow the basic precautions
listed below to avoid the possibility of
physical injury to you or others, or
damage to the product or other
property. These precautions include,
but are not limited to, the following:
Power supply/power cord
• When removing the electric plug from the
product or an outlet, always hold the plug
itself and not the cord. Pulling by the cord
can damage it.
Location and connection
• Do not place the product in an unstable
position where it might accidentally fall
over and cause injuries.
• Keep the device and small parts out of
reach of children, to keep them from
putting their fingers into openings on the
product and accidentally being injured.
There is a danger that children might
swallow small parts. This product is not
suitable for use in locations where
children are likely to be present.
• Do not block the vents. This product has
ventilation holes at the top/front/rear/sides
to prevent the internal temperature from
becoming too high. In particular, do not
place the product on its side or upside
down. Inadequate ventilation can result in
overheating, possibly causing damage to
the product(s), or even fire.
• When installing the product:
- Do not cover it with any cloth.
- Do not install it on a carpet or rug.
- Make sure the top or side surface faces
up; do not install on its front, rear, or
upside down.
- Do not use the product in a confined,
poorly-ventilated location.
Inadequate ventilation can result in
overheating, possibly causing damage to
the product(s), or even fire. If this product
is to be used in a small space other than
an EIA-standard rack, make sure that there
is adequate space around the product: at
least 2.5 cm above, and 10 cm behind.
• Do not use the separately sold WK-SWR
wall mount accessory to attach the unit to
a ceiling that is higher than 2 meters. If the
unit falls, injury or damage might occur.
• If the product is mounted in an EIA
standard rack, carefully read the section
“Please read before mounting the unit into
a rack” on page 20. Inadequate
ventilation can result in overheating,
possibly causing damage to the
product(s), malfunction, or even fire.
6 SWR2311P-10G Owner’s Manual
• Do not place the product in a location
where it may come into contact with
corrosive gases or salt air. Doing so may
result in malfunction.
• Before moving the product, remove all
connected cables.
• Always consult qualified Yamaha service
personnel if the product installation
requires construction work, and make
sure to observe the following precautions.
- Choose mounting hardware and an
installation location that can support the
weight of the product.
- Avoid locations that are exposed to
constant vibration.
- Use the required tools to install the
product.
- Inspect the product periodically.
Maintenance
• Remove the power plug from the AC
outlet when cleaning the product.
Handling caution
• Do not insert your fingers or hands in any
gaps or openings on the product (vents,
ports, panel, etc.).
• Do not rest your weight on the product or
place heavy objects on it.
• Do not look into the optical emitter when a
separately sold SFP module (SFP-SWRG-
LX, SFP-SWRG-SX) is installed.
The separately sold SFP modules are
class 1 laser devices. They may emit
laser beams invisible to the eye. If the
laser beam enters your eye, your eyesight
might be damaged.
Backup battery
• Do not replace the backup battery by
yourself. Doing so may cause an
explosion and/or damage to the
product(s).
When the backup battery needs to be
replaced, contact your Yamaha dealer
and have qualified Yamaha service
personnel replace the backup battery.
Yamaha cannot be held responsible for
damage caused by improper use or
modifications to the product, or data
that is lost or destroyed.
English
SWR2311P-10G Owner’s Manual 7
NOTICE
To avoid the possibility of malfunction/ damage
to the product, damage to data, or damage to
other property, follow the notices below.
Handling and maintenance
• Do not touch any port with your fingers or
anything metallic. Failure to observe this
precaution could result in damage to the
product.
• Do not expose the product to excessive
dust or vibration, or extreme cold or heat
(such as in direct sunlight, near a heater,
or in a car during the day), in order to
prevent the possibility of panel
disfiguration, unstable operation, or
damage to the internal components.
• Condensation can occur in the product
due to rapid, drastic changes in ambient
temperature—when the product is moved
from one location to another, or air
conditioning is turned on or off, for
example. Using the product while
condensation is present can cause
damage. If there is reason to believe that
condensation might have occurred, leave
the product for several hours without
turning on the power until the
condensation has completely dried out.
• Do not place vinyl, plastic or rubber
objects on the product, since this might
discolor the panel.
• When cleaning the product, use a dry and
soft cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical-
impregnated wiping cloths.
• Be sure to earth (ground) any static
electricity from your body or clothing
before touching the product. Failure to
observe this precaution could result in
damage to the product.
• Do not install the product in a location
where magnetic fields are strong.
Otherwise, it might cause the product to
malfunction.
• Do not connect any noise generating
devices on the same power line as the
product. Failure to observe this precaution
could result in a malfunction or damage to
the product.
• Do not locate any connected LAN cables
close to the power cord. Otherwise, high
voltage might be induced, resulting in
malfunction.
• A 1000BASE-T connection will require an
Enhanced Category 5 (CAT5e) or better
LAN cable.
• Do not install any SFP module other than
the separately sold SFP-SWRG-LX or
SFP-SWRG-SX in an SFP port. Operation
cannot be guaranteed if any SFP module
other than the above is installed.
• Attach the dust cover to SFP ports that are
not in use. Failing to do so could allow
foreign objects to enter, causing
malfunctions. Keep the dust cover in a
safe place so that it is not lost.
• The rubber feet included in this package
can be attached to the product to prevent
slippage when it is to be used on a
slippery surface.
Saving data
• This unit has a built-in backup battery that
maintains time information for the data.
When the backup battery runs down, the
time information will be initialized, causing
incorrect time information to be recorded
in the log. If this occurs, contact your
dealer or a Yamaha customer service
center to have the backup battery
replaced. The life span of the backup
battery is approximately 10 years, but this
may vary depending on the conditions of
use. Set the clock after replacing the
battery.
Data maintained by the backup battery:
• Time information.
8 SWR2311P-10G Owner’s Manual
About functions/data bundled
with the product
• This is a class A product. Operation of this
product in a residential environment could
cause radio interference.
About this manual
• The illustrations as shown in this manual
are for instructional purposes only.
• Windows is a registered trademark of
Microsoft
®
Corporation in the United
States and other countries.
• The company names and product names
in this manual are the trademarks or
registered trademarks of their respective
companies.
• Software may be revised and updated
without prior notice.
About disposal
• This product contains recyclable
components. When disposing of this
product, please contact the appropriate
local authorities.
Open Source Software Used in this
Product
• Please refer to Yamaha Pro Audio website
for the details of licensing article.
http://www.yamaha.com/proaudio/
• Suitable for installation in Information Technology Rooms in accordance with Article 645 of
the National Electrical Code and NFPA 75.
• The device can only be used in a fixed location such as a telecommunication centre, a
dedicated computer room. When you install the device, ensure that the protective earthing
connection of the socket-outlet is verified by a skilled person.
The model number, serial number, power requirements, etc., may be found
on or near the name plate, which is at the top of the unit. You should note
this serial number in the space provided below and retain this manual as a
permanent record of your purchase to aid identification in the event of theft.
Model No.
Serial No.
(top_en_01)
ᔘ䴱⊖䄁ഔ᭬
Particular usage in this manual
The following company and product names will be abbreviated as below in this manual.
• Yamaha L2 Switch SWR2311P-10G: This product
• 10BASE-T/100BASE-TX/1000BASE-T cable: LAN cable
English
SWR2311P-10G Owner’s Manual 9
COTENTS
PRECAUTIONS ......................................................................................................... 4
NOTICE ..................................................................................................................... 7
Introduction.............................................................................................................10
Features...................................................................................................................10
Separately sold items ..............................................................................................10
Related software and documents ............................................................................10
Controls and Connectors.......................................................................................11
Front Panel ..............................................................................................................11
Top panel .................................................................................................................13
Rear panel ...............................................................................................................14
Side panel................................................................................................................14
Bottom panel............................................................................................................15
Switching the display mode .....................................................................................16
Port indicators..........................................................................................................17
Installation in a rack............................................................................................... 20
Installation on a wall or ceiling............................................................................. 22
Settings................................................................................................................... 25
Making settings using the Web GUI........................................................................ 25
Making settings from the command line using the CONSOLE port........................ 26
Connections ........................................................................................................... 28
Initialization ............................................................................................................ 31
Appendix................................................................................................................. 33
Hardware specifications.......................................................................................... 33
Dimensional diagram.............................................................................................. 34
RJ-45/DB-9 console cable pin configuration........................................................... 35
Software license agreement ................................................................................... 35
Index........................................................................................................................ 38
Accessories
Please ensure that you have all of the following accessories.
• Owner’s Manual (this manual)
•Power Cord
• Power Cord Clamp (used only for the included dedicated power cord)
• Leg (Rubber feet) (x4)
Introduction
10 SWR2311P-10G Owner’s Manual
Introduction
Thank you for purchasing the Yamaha SWR2311P-10G intelligent L2 switch.
This product supplies power to PoE powered devices on the network.
This owner’s manual is intended for installers and facility designers, and explains installation
methods and settings.
Please be sure to read this manual before you start using the product to take full advantage of
its features.
Please retain this manual in a safe location for future reference.
• Recommended settings for stable operation of a Dante network (such as QoS, EEE, and
IGMP Snooping) can be made easily.
• Up to 30W of power can be simultaneously supplied to each port that supports PoE power
supply.
• A function is provided to automatically reset a device that is being powered from this unit by
turning its power supply on/off if an abnormality is detected in that device.
• The PoE supply status can be checked or turned on/off via Yamaha LAN Monitor.
• RK-SWR rack mount accessory: This is required when installing the unit in a 19-inch rack.
• WK-SWR wall mount accessory: This is required when installing the unit on a wall or on a
ceiling less than 2 meters high.
• SFP-SWRG-LX or SFP-SWRG-SX SFP module: This is required when connecting via
1000BASE-LX or 1000BASE-SX.
• Yamaha LAN Monitor/Yamaha LAN Monitor User Guide
This is a Windows application used to monitor this unit’s information and the entire network
including all Dante devices on the Dante network, and the user guide for this application.
• Yamaha Network USB Serial Driver/Yamaha Network USB Serial Driver Installation
Guide
This is a Windows driver that allows communication when the mini-USB CONSOLE port is
connected via a USB cable to a computer, and the installation guide for this driver.
• Command Reference
This explains the commands used when using the command line to make settings from a
computer.
• Technical Reference
This describes details of the SWR2311P-10G’s functions.
This software and these documents can be downloaded from the following website.
http://www.yamaha.com/proaudio/
Features
Separately sold items
Related software and documents
English
Controls and Connectors
SWR2311P-10G Owner’s Manual
11
Controls and Connectors
1 POWER indicator
Lights when power is provided to the unit.
Caution
When one of the following problems occurs, the POWER indicator is lit orange. Verify the sta-
tus of the problem, and take the appropriate action. Refer to the Web GUI to determine which
specific problem has occurred.
• Fan stopped
The fan that exhausts the heat dissipated by this unit has stopped.
You must immediately stop using the unit, and contact a Yamaha service center listed at
the end of this manual to have the unit repaired or inspected.
• Abnormal temperature inside this unit.
The temperature inside this unit is abnormal.
Reconsider the environment in which this unit is installed, and correctly install this unit so
that its internal temperature is appropriate.
2 mini-USB CONSOLE port
This is a mini-USB port for making settings. Use a USB cable to connect it to the USB port
of a computer. Use a USB cable equipped with a USB Type A connector and a mini-USB
Type B (5-pin) connector.
Notice
Use a cable that supports data transfer. Charge-only cables cannot be used.
Front Panel
1 2 3 4 5 6 7 8
9
POWER indicator Status
Unlit Power off
Flashing (green) Power on, starting up
Lit (green) Power on, normal
Lit (orange) Power on, error occurred
Controls and Connectors
12 SWR2311P-10G Owner’s Manual
3 RJ-45 CONSOLE port
This is an RJ-45 port for making settings. Use an RJ-45/DB-9 console cable to connect it
to the RS-232C connector (COM port) of the computer. Use an RJ-45/DB-9 serial cable
that is wired as described in “Appendix.”
4 microSD indicator
Indicates the connected and operating status of the microSD card.
Caution
Do not remove the microSD card if this indicator is flashing green.
Doing so will damage the data.
5 microSD slot
A microSD card can be inserted in this slot.
6 MODE button and MODE indicator
When you press the MODE button, the display mode of the port indicators is switched in the
following sequence, allowing you to check the current status by the upper and lower MODE
indicators.
• When the initial display mode is LINK/ACT
[LINK/ACT]
[PoE] [VLAN] [STATUS] [OFF] back to [LINK/ACT].
• For details on the MODE button that switches modes and the MOD indicator, refer to
“Switching the display mode” (page 16).
• For details on the port indicators in each selected mode, refer to “Port indicators”
(page 17).
7 LAN ports
These ports can supply PoE and are compatible with 10BASE-T, 100BASE-TX, and
1000BASE-T.
PoE supply is compliant with IEEE 802.3at, and can supply up to 30W to all ports.
8 LAN/SFP combo ports
These can be used either as LAN ports or SFP ports.
LAN ports are 1000BASE-T uplink ports. They do not have power supply capability.
SFP ports are for installing a separately sold SFP module (SFP-SWRG-LX or SFP-
SWRG-SX).
For details on installing an SFP module, refer to “Installing an SFP module” (page 28) in
“Connections.”
microSD indicator Status
Unlit No microSD card is inserted in the slot.
Flashing (green) The microSD card is being accessed.
Lit (green) A microSD card is inserted in the slot.
English
Controls and Connectors
SWR2311P-10G Owner’s Manual
13
Caution
Do not connect a cable to both the LAN port and the SFP port of the same port
number.
Doing so might cause a malfunction.
9 Cooling vents
External air is taken in through these cooling vents.
Warning
Do not block the cooling vents or place objects near them.
Doing so could cause fire or malfunctions.
0 Product label
This lists the model name, serial number, and MAC address etc. of this unit.
Top panel
0
9
MAC address
Serial number
Controls and Connectors
14 SWR2311P-10G Owner’s Manual
A Power cord clamp attachment holes
The included power cord clamp (C-shaped) can be attached here.
Refer to “Connecting the power cord” (page 30) for information on how to install the unit.
B Fans
These forcibly exhaust the heat that is generated inside the unit.
When a problem is detected, the POWER indicator is lit orange.
Caution
Do not block the fan vents or place objects near them.
Doing so could cause fire or malfunctions.
C Power supply inlet (three-pin connector, C14 type)
Insert the included power supply cord here. Connect it to an electrical outlet of the appro-
priate voltage for the unit.
Rear panel
Side panel
A
CB
Serial number
English
Controls and Connectors
SWR2311P-10G Owner’s Manual
15
D Leg attachment guides
These indicate the locations at which the legs are to be attached when the unit is installed
in a horizontal position.
If the unit is to be installed in a horizontal position, attach the included legs as shown in the
illustration.
E Rack mount accessory attachment holes
Use these holes to attach the RK-SWR rack mount accessory.
Refer to “Installation in a rack” (page 20) for information on how to install the unit.
Bottom panel
D
F
E
F
D
Leg
Leg
Leg attachment guides
Controls and Connectors
16 SWR2311P-10G Owner’s Manual
F Wall mount accessory attachment holes
Use these holes to attach the WK-SWR wall mount accessory.
Refer to “Installation on a wall or ceiling” (page 22) for information on how to install the
unit.
Each time you press the MODE button, the display mode of the port indicators is switched.
The lit status and color of the upper and lower MODE indicators shows the selected display
mode.
(when the initial display mode is LINK/ACT)
Switching the display mode
Unlit: Lit (green): Lit (orange):
Mode name Lit state of the mode indicators Explanation
1
LINK/ACT
Upper Lit (green)
Lower Unlit
The left indicator of the LAN
port or SFP port shows the link
status, and the right indicator
shows the connection speed.
2 PoE
Upper Lit (orange)
Lower Unlit
Indicates the power supply sta-
tus of the LAN port.
3 VLAN
Upper Unlit
Lower Lit (green)
Indicates the VLAN ID specified
for the LAN port or SPF port.
4 STATUS
Upper Unlit
Lower Lit (orange)
Indicates the error status of the
LAN port or SFP port.
5 OFF
Upper Unlit
Lower Unlit
Turns off the indicators of the
LAN ports and SFP ports.
1 Back to LINK/ACT
LED MODE
LINL/ACT
PoE
VLAN
STATUS
LED MODE
LINL/ACT
PoE
VLAN
STATUS
LED MODE
LINL/ACT
PoE
VLAN
STATUS
LED MODE
LINL/ACT
PoE
VLAN
STATUS
LED MODE
LINL/ACT
PoE
VLAN
STATUS
English
Controls and Connectors
SWR2311P-10G Owner’s Manual
17
These are indicators for the LAN ports and SFP ports, and indicate the state of each port
in each mode.
■ LINK/ACT mode
The indicators show the link status and connection speed of the LAN port or SFP port.
LAN ports
SFP ports
Port indicators
Left
Indicator
LAN ports (upper row)
LAN ports (lower row) SFP ports (lower row)
SFP ports (upper row)
Left
Indicator
Left
Indicator
Left
Indicator
Right
Indicator
Right
Indicator
Right
Indicator
Right
Indicator
Left indicator Link status Right indicator Connection speed
Unlit
The link is lost.
(unavailable)
Unlit
Not connected.
Alternatively, connected
by 10BASE-T.
Lit (green)
A link is established.
(available)
Lit (orange)
Connected by
100BASE-TX.
Flashing (green)
Data is flowing.
Lit (green)
Connected by
1000BASE-T.
Left indicator Link status Right indicator Connection speed
Unlit
The link is lost.
(unavailable)
Unlit
Not connected.
Lit (green)
A link is established.
(available)
Lit (green)
Connected by
1000BASE-LX or
1000BASE-SX.
Flashing (green)
Data is flowing.
Controls and Connectors
18 SWR2311P-10G Owner’s Manual
■ PoE mode
Indicates the power supply status.
The right indicator is unlit.
■ VLAN mode
Indicates the VLAN membership status of the LAN port or SFP port.
*1 Indicators whose VLAN ID is number 7 or later will have the same lit status.
NOTE
The default VLAN (ID=1) is not shown as a member VLAN.
■ STATUS mode
Indicates the error status of the LAN port or SFP port.
When the following errors are detected, the unit forcibly enters STATUS mode.
• Loop detected
• SFP optical input level abnormality detected
• PoE supply stoppage or receiving device error detected
Left indicator Power supply status
Unlit
Not supplying power.
Lit (green)
Supplying power.
Left indicator Right indicator VLAN ID
Indicator
assignment
order
Unlit Unlit
No ID
Lit (green) Unlit
Lowest-numbered VLAN ID
1
Lit (orange) Unlit
The lit pattern is assigned in
ascending order of the VLAN
ID number.
2
Unlit Lit (green) 3
Unlit Lit (orange) 4
Lit (green) Lit (orange) 5
Lit (orange) Lit (green) 6
Lit (green)*1 Lit (green)*1
7th and subsequent VLAN ID
7
Lit (orange) Lit (orange)
Membership in more than one
VLAN
English
Controls and Connectors
SWR2311P-10G Owner’s Manual
19
LAN ports
*1 This unit can supply a total of 240W. For details on the safety margin, refer to the technical documenta-
tion of the SWR2311P-10G.
SFP ports
The right indicator is unlit.
For details, refer to the page for this unit on the Yamaha Pro Audio website.
http://www.yamaha.com/proaudio/
NOTE
• The error causes can be determined by using the show error port-led command.
• You can forcibly reset the error status by long-pressing (three seconds) the MODE button.
• When all errors are cleared, or when the error status is forcibly reset by long-pressing the MODE
button, the unit automatically returns to the initial display mode.
■ OFF mode
Turns off the indicators of the LAN ports and SFP ports.
Left indicator Right indicator Error information
Unlit Unlit Normal
Flashing (orange) Unlit
A loop was detected.
The port has been blocked or shut down.
Lit (orange) Unlit
A fault has occurred in the device receiving power,
and power is not being supplied.
Unlit Flashing (orange)
Because the maximum total electrical power that
this unit can supply has been exceeded, power
supply to this port was stopped.
Since the total supplied electrical power has
exceeded the safety margin, it is not possible to
add more devices that receive electrical power.
*1
Unlit Lit (orange)
Power supply is suspended because the power
output at the port has exceeded the maximum
power supply allowed per port. The maximum
power supply allowed per port varies depending
on the power consumption class of the connected
powered device.
Left indicator Status
Unlit Normal
Flashing (orange)
A loop or an SFP optical input level abnormality
was detected.
Installation in a rack
20 SWR2311P-10G Owner’s Manual
Installation in a rack
This section explains how to attach an optional RK-SWR rack mount accessory to the unit.
Please read before mounting the unit into a rack
This unit is warrantied to operate in an ambient temperature range of 0–40 °C. If you install
this unit along with other devices into an EIA-standard or JIS-standard rack, the tempera-
ture inside the rack may rise due to heat released from the other devices, resulting in poor
performance of the unit. To prevent the temperature inside the unit from rising, mount the
unit in the rack in accordance with the requirements below.
• If you plan to rack-mount the unit along with a device that tends to generate heat,
such as an amplifier (excluding an XMV series), be sure to leave a gap of 1U or
more from such devices. Also, be sure to maintain sufficient ventilation in this space
by installing a ventilation panel or leaving it open.
• Open the rear panel of the rack, place the rack 10cm (about four inches) away from
the walls and ceiling to keep sufficient ventilation. If you cannot open the rear panel
of the rack, install a commercially-available forced ventilation device, such as a fan
kit. If you install a fan kit, closing the rear panel may work better for heat dissipation
purposes. For more information, refer to the owner’s manual for the rack and/or fan
kit.
Caution
If you plan to relocate the rack, be sure to first remove this unit from the rack.
If you move the unit while it is still installed in the rack, vibration or physical shock might
deform or damage the rack mount accessory, causing injury. This might also cause the unit to
malfunction.
[Installation]
This section explains how to attach the unit in the middle block of a rack mount panel. If
you plan to attach the unit in the left or right block, follow the same procedure below.
Notice
If the supplied feet have already been attached to the unit, remove them.
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Yamaha SWR2311P Instrukcja obsługi

Yamaha
Marka
Yamaha
Model
SWR2311P
Typ
Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla
ściągnij PDF
raport

w innych językach

Powiązane dokumenty

Inne dokumenty