Candy FCE 848 VX WF/E Instrukcja obsługi

GB

FR

02

18

IT

ES

34

50

DE

66

CZ

82

PL

RU

98

114

PT

130

USER INSTRUCTIONS

OVENS

NOTICE D'EMPLOI ET D'INSTALLATION

DES FOURS ENCASTRABLES

MANUALE D’ISTRUZIONI

FORNO

INSTRUCCIONES DE USO

HORNOS EMPOTRABLES

BEDIENUNGSANLEITUNG

BACKOFEN

POKYNY PRO UŽIVATELE

TROUBY

INSTRUKJA OBSŁUGI

PIEKARNIKI DO ZABUDOWY

Инстукции для пользователей

Духовые шкафы

PIEKARNIKI DO ZABUDOWY

INSTRUKJA OBSŁUGI

CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy

Safety Indications

GB 02

• WARNING: the appliance and accessible parts become hot during use.

Be carefulnottotouch anyhot parts.

• The appliance can be used by those aged 8 or over and by those with

limited physical, sensorial or mental capacities, without experience or

knowledge of the product, only if supervised or provided with

instruction as to the operation of the appliance, in a safe way with

awareness of the possible risks.

• Children under 8 should be kept at a safe distance from the appliance

if not continuouslysupervised.

• Cook the vegetables in a container with a lid insteadof an open tray.

• During cooking, moisture may condense inside the oven cavity or on

the glass of the door. This is a normal condition. To reduce this effect,

wait 10-15 minutes after turning on the power before putting food

inside the oven. ln any case, the condensation disappears when the

ovenreachesthe cooking temperature.

• WARNING: ensure that the appliance is switched off before replacing

the bulb, to avoidthe possibility of electric shocks.

• WARNING: in order to avoid any danger caused by the accidental

resetting of the thermal interruption device, the appliance should not

be powered by an external switching device, such as a timer, or be

connected to a circuitthat is regularlyswitchedon and off.

• Children should not play with the appliance.

• Avoid leaving food inside the oven after cooking for more than 15/20

minutes.

• WARNING: the accessible parts can become hot when the grill is in

use. Children should be kept at a safe distance.

• Cleaning and maintenance should not be carried out by unsupervised

children.

• Do not use rough or abrasive materials or sharp metal scrapers to

clean the oven door glasses, as they can scratch the surface and cause

the glass to shatter.

• The oven must be switched off before removing the removable parts.

Aftercleaning, reassemblethem according the instructions.

GB 03

• Failure to comply with the above can compromise the safety of the

appliance and invalidatethe guarantee.

• Connect a plug to the supply cable that is able to bear the voltage,

current and load indicated on the tag and having the earth contact. The

socket must be suitable for the load indicated on the tag and must have

ground contact connected and in operation. The earth conductor is

yellow-green in colour. This operation should be carried out by a

suitably qualified professional. ln case of incompatibility between the

socket and the appliance plug, ask a qualified electrician to substitute

the socket with another suitable type. The plug and the socket must be

conformed to the current norms of the installation country. Connection

to the power source can also be made by placing an omnipolar breaker

between the appliance and the power source that can bear the

maximum connected load and that is in line with current legislation.

The yellow-green earth cable should not be interrupted by the breaker.

The socket or omnipolar breaker used for the connection should be

easily accessible when the appliance is installed.

• Only use the meat proberecommended for this oven.

• Do not use a steamcleaner for cleaning operations.

• The disconnection may be achieved by having the plug accessible or

by incorporating a switch in the fixed wiring in accordance with the

wiring rules.

• lf the power cable is damaged, it should be substituted with a cable or

special bundle available from the manufacturer or by contacting the

customer service department. The type of power cable must be

H05V2V2-F. This operation should be carried out by a suitably qualified

professional. The earth conductor (yellow-green) must be

approximately 10 mm longer than the other conductors. For any

repairs, refer only to the Customer Care Department and request the

use of original spareparts.

• Any excess of spilled materialshould be removedbefore cleaning.

• A long power supply failure during an occurring cooking phase may

cause a malfunction of the monitor. ln this case contact customer

service.

• The appliance must not be installed behind a decorative door in order

toavoid overheating.

• When you place the shelf inside, make sure that the stop is directed

upwards and in the back of the cavity. The shelf must be inserted

completely into the cavity.

• WARNING: Do not line the oven walls with aluminium foilor single-use

protection available from stores. Aluminium foil or any other

protection, in direct contact with the hot enamel, risk melting and

deteriorating the enamel of the insides.

• WARNING: Neverremove the oven door seal.

• CAUTION: Do not refill the cavity bottom with water during cooking or

when the oven is hot.

• No additional operation/setting is required in order to operate the

appliance at the rated frequencies.

GB 04

General Instructions

6

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Conformity declaration

2.1 Overview

2.2 Accessories

2.3 First use

Product Description

8

3.1 Display description

3.2 Cooking modes

Use of the Oven

9

4.1 General notes on cleaning

4.2 Self-cleaning oven with catalytic

4.3 Maintenance

• Removing and cleaning wire racks

• Removal of the oven window

• Removal and cleaning of the glass

door

Oven Cleaning and Maintenance

14

5.1 F.A.Q.

Troubleshooting

17

Summary

GB 05

1. General Instructions

NOTE: The oven functions, properties and accessories cited in this manual will vary, depending on the

model youhave purchased.

We thank you for choosing one of our products. For the

best results with your oven, you should read this

manual carefully and retain it for future reference.

Before installing the oven, take note of the serial

number so that you can give it to customer service staff

if any repairs are required. Having removed the oven

from its packaging, check that it has not been damaged

during transportation. If you have doubts, do not use

the oven and refer to a qualified technician for advice.

Keep all of the packaging material (plastic bags,

polystyrene, nails) out of the reach of children. When

the oven is switched on for the first time, strong

smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven

heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to

dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where

the instructionscontainedin this document are not observed.

1.1 Safety Indications

- Do not touchthe appliancewith wet or damp hands or feet;

The use of anyelectrical appliance implies the observance of some fundamental rules:

- Do not pull on the powercable to disconnect the plug fromthe socket;

- In case of malfunctionand/or poor operation,switch offthe appliance and do not tamper with it.

Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for

example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot

be held responsiblefor anydamage resultingfrom improper, incorrector unreasonable usage.

- In generalthe use of adaptors,multiple socketsand extensioncables is not recommended;

1.2 Electrical Safety

Before connecting the oven tothe powersupply, ask a qualified electrician to check the continuity of the

power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other

problems caused by failure to connect the oven to the earth terminal or by an earth connection that has

defective continuity.

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.

The power supply to which the oven is connected must conform with the laws in force in the country of

installation. The manufacturer accepts no responsibility forany damage causedby the failureto observe

these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a

disconnector with multiple poles, depending on the laws in force in the country of installation. The

electrical supply should be protected with suitable fuses and the cables used must have a transverse

section thatcan ensure correctsupply to the oven.

The oven is supplied with a power cable that should only be connected to an electrical supply with 220-

240 Vac power between the phases or between the phase and neutral. Before the oven is connected to

the electricalsupply, it is important tocheck:

- The settingof the disconnector.

- Power voltageindicatedon the gauge;

WARNING

CONNECTION

The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of

the powersupply.

GB 06

1.3 Recommendations

Aftereach use of the oven,a minimum of cleaning will help keepthe oven perfectly clean.

Do not line the oven walls with aluminium foilor single-use protection available fromstores. Aluminium

foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the

enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong

smokey smells, we recommend not using the oven at very high temperature. It is better to extend the

cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,

weadvise you only use dishes and baking moulds resistant toveryhigh temperatures.

1.4 Installation

The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required

to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The

installation instructions for professionally qualified personnel must be followed. Incorrect installation

may cause harm or injury to people, animals or belongings. The manufacturer cannot be held

responsiblefor such harm or injury.

The oven can be located high in a column or under a worktop. Before fixing, you must ensure good

ventilation in the oven space to allow proper circulation of the fresh air required for cooling and

protecting the internal parts. Make the openings specified on last pageaccording tothe type of fitting.

NOTE:As the oven could require maintenance work, it is advisable to keep another wall socket available

so that the oven can be connected to this if it is removed from the space in which it is installed. The

power cable must only be substituted by technical service staff or by technicians with equivalent

qualifications.

1.5 Waste management and environmental protection

This appliance is labelled in accordance with European Directive 2012/19/EU regarding

electric and electronic appliances (WEEE). The WEEE contain both polluting substances

(that can have a negative effect on the environment) and base elements (that can be

reused). It is important that the WEEE undergospecific treatments to correctly remove and

dispose of the pollutants and recover all the materials. Individuals can play an important

role in ensuring that the WEEE do not become an environmental problem; it is essential to

follow a fewbasic rules:

In many countries, domestic collections may be available for large WEEEs. When you buy a new

appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as

long as the appliance is of an equivalenttype and has the same functions as the purchased appliance.

Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently

as possible, because heat from the cavity disperses every time it is opened. For a significant energy

saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and

use the residual heat thatthe ovencontinues to generate. Keep the seals clean and in order, toavoid any

heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed

cooking" programme makes energy saving more simple, moving the cooking process to start at the

reducedtarifftime slot.

SAVING AND RESPECTING THE ENVIRONMENT

- The WEEE should be taken to dedicated collection areas managed by the town council or a registered

company.

- The WEEE should not be treated as domestic waste;

1.6 Declaration of compliance

• By placing the mark on the appliance, we are confirming compliance to all relevant European

safety, health and environmentalrequirementswhich are applicable in legislationfor this product.

• Hereby, Candy Hoover Group Srl declares that the radio equipment is in compliance with Directive

2014/53/EU. The full text of the EU declaration of conformity is available at the following internet

address:www.candy-group.com.

GB 07

2. Product Description

2.1 Overview

2.2 Accessories (According to model)

Metal grill

1

Drip pan

2

Holds baking trays and plates.

Collects the residues that drip during the cooking

of foodson the grills.

GB 08

1. Control panel

2. Shelf positions

(lateral wire grid if included)

3. Metal grill

4. Drip pan

5. Fan (behind the steel plate)

6. Oven door

Led vision

3

-Optimum view

Is an illumination system which replaces the

traditional « light bulb ». 14 LED (for non-pyrolitic

versions) or 10 High Power LED (for pyrolitic

versions) lights are integrated within the door.

These produce white high quality illumination

which enables to view the inside of the oven with

clarity without anyshadows on all the shelves.

Advantages:

This system, besides providing excellent illumination

inside the oven, lasts longer than the traditional light

bulb its easier and to maintain and most of all saves

energy.

-Long life illumination

-Very low energy consumption, -95% in

comparison with the traditionalillumination High.

1

2

3

5

4

6

GB 09

2.3 First Use

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash

all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the

empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering

smells of newness.

PRELIMINARYCLEANING

3. Use of the Oven

3.1 Display description

Cooking

duration

Cooking

end Timer

Clock

set

Child

lock

WiFi

ON / OFF

EXTRA

The oven is switched on and off with this button.

If the oven is switched off, the display shows the clock. When

the oven is inactive, all the functions are available except the

cookingduration and end of cooking.

If the clock is not set, the oven does not work: the display

flashes, showing "12:00" and the only functioning key is

Extra.From the Extrakey, the followingfunctions can be set:

Lateral wire grids

4

It located at both sides of the oven cavity. It holds

metalgrills and drip pans.

GB 10

FUNCTION HOW TO ACTIVATE

HOW TO

DEACTIVATE

WHAT IT DOES WHY IT IS NEEDED

COOKING

DURATION

“-” keys, confirming by

been inserted, otherwise

NB: can only be set with an

activecookingprogramme.

PressEXTRAtwiceand set

the time using the “+” and

pressing"SELECT".

The displayshows“00:00”

if no cooking durationhas

the displayshowsthetime

remaining.

cooking time as required

duration, reset the display

•To modify cooking before

the set time, press EXTRA

twice and regulate the

using the “<” and “>”

keys, before pressing

SELECT" once more.

•To cancel the cooking

to “00:00”.

When a cooking programme

terminates , the oven

switches off while the display

shows "END" (the cooking

programme icon remains on)

until the On/Off button, the

only functioning key, is

pressed. When a c o o k i n g p

r o g r amme terminates, an

alarm will sound.

When the cooking time has

finished,theoven

automatically switches off

and the alarm sounds for a

fewseconds.

NB: can only be set with an

active cooking programme.

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

The cooking duration is

automatically calculated.

END OF

COOKING

•If a cooking programme is set,

by pressing the “<” and “>” keys

you can see and modify the

temperature set: at the first t o

uch,theoperating

temperature is shown while

another touch will allow you to

modify said temperature.

•If a cooking programme is set,

it will be lost if the "F" key is

pressed.

•This function is also used for

cooking that can be scheduled

in advance.

•If delayed cooking is set, the

oven switches off and the

display shows the current time

while the cooking programme,

cooking duration and end of

cookingiconsareilluminated.

To modify the end of

cooking before the set

time, press EXTRA enough

times to illuminate the

icon, regulate the end of

cooking time as required

using the “<” and “>” keys

and confirm by pressing

"SELECT".

To cancel the end of

cooking time, reset the

displayto“00:00”.

TIMER

by pressing"SELECT".

•To modify the timer, press

EXTRA enough times to

as required using the “<”

and “>” keysandconfirm

illuminate the icon,

regulate the cookingtime

•This function activatesan

You can select a time

between00:00and 23:59.

not switchthe ovenoff).

alarm that sounds for a few

secondswhen the set time

expires(thisfunctiondoes

Press EXTRA enough times

to illuminate the icon and

use the “<” and “>” keys to

set the time, confirming by

pressingSELECT.

• The display shows

“00:00” if no time has been

inserted or the time

remaining if this has

alreadybeenset.

• The timer functions

regardless of whether the

ovenisswitchedon.

SETTING

THE CLOCK

•The alarm functions

regardless of whether the

oven is switched on.

•Switched on for the ﬁrst

time, the display

illuminates and sh

ows

"12:00".

•To modify the time, press

EXTRA enough times to

illuminate the icon and use

the “<” and “>” keys to set

the time, conﬁrming it by

pressing SELECT.

•It allows you to set the

time that appears on the

display.

•This function is useful

when there are children in

the house.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the “<” or “>” key to

activate this function: the

display will show ON; to

conﬁrm press SELECT.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the “<” or “>” key to

deactivate this function:

the display will show OFF;

to conﬁrm press SELECT.

•If the function is active

only the "Extra" button, to

deactivate the function,

and "On/Off" button can

be used.

CHILD

SAFETY

LOCK

When a cooking

programme terminates,

the oven switches off while

the display shows "END"

(the cooking programme

icon remains on) until the

On/Off button, the only

functioning key, ispressed.

When a cooking

programme terminates, an

alarm will sound.

GB 11

- Iconis permanently lit: the oven is connected to your Wi-Fi router.

- On: Wi-fi is on and the oven is only controllable via the app. It means that it is not possible to select cooking

functions, recipes and temperature from the display. Only the Wi-Fi menu is available by pressing "Extra". You

can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can

only be switched on via the app.

- Iconnot lit: Wi-Fi is off.

- Off: Wi-Fi is off; the oven is not controllablevia the app.

- The icon blinks 1 second on and3 seconds off: theoven is in read only mode.

Pressing"Extra"on the timer displayallows you to select the Wi-

Fi menu.In the Wi-Fi menu if you pressthe "< >" buttons you canselect:

If Wi-Fi is not configuredit is onlypossible to choose between offand reset.

To enroll the appliance for Wi-Fi, press "Extra" on the display until the Wi-Fi icon lights, then select "Reset" by

pressing "< >". The procedure on the app should then be followed. Once selected, the appliance gives you 5

minutesto completethe enrolment process.

- Iconblinks 1 second on an 1 second off:the oven is accessible to your Wi-Fi networkand ready to be enrolled.

If the enrolmenthas not been successful,the Wi-Fi iconwill switch off after5 minutes.

When the oven is connected to Wi-Fi, the default cooking time duration is 5 hours, but this can be modified by

the user.

- Read: the oven sends its status to the app but it cannot be controlled remotely. The oven must be enrolled

before thisis possible.

Wi-Fi Enrolment:

Wi-Fi icon

- Reset: This setting should be used to enrol the oven the first time it connects to your Wi-Fi network and to

reset the current Wi-Fi connection to allow a new enrolment. Once selected, the appliance gives you 5

minutes to complete the enrolment process. During this process the cooking functions, recipes and

temperature setting are not accessible from the display. Only the Wi-Fi menu is available by pressing "Extra".

You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it

can only be switched on via the app. To exit the enrolment/reset procedure via the display, press "Extra" and

then use "< >" buttons to select "Off". After five minutes, the appliance will exit the enrolment/reset

procedure automatically.

- The icon blinks 3 seconds on and 1 second off:the ovenis trying toconnect to your Wi-Fi router.

WiFi (depends on the oven model)

Grill

Oven box

Turnspit

Circular

heating element

Bottom heating element

Fan

Defost

Pyro

LANGUAGE SETTING The language can be set when

the oven is switched off by pressing the Extra and Select

buttonssimultaneously and for3". The current language is

shown on the display and can be changed by pressing the

“<” or “>” keys, confirming it by pressing SELECT. Available

languagesare: Italian, English, Frenchand German.

SELECT Any selection must be confirmed. If not

confirmed within 15 seconds, the selection is cancelled.

Bychanging menu, any unconfirmedselection is lost.

“HOT” ICON When a cooking programme finishes or when the oven switches off, if the oven is still

hot, the displayshows the currenttime alternatingwith the message “HOT” at 3 intervals.

For detailed information about HOW TO CONNECT your simply-Fi appliance and

HOW TO USE it at its best, go to or visit the dedicatedhttp://www.candysimplyfi.com

CANDY SIMPLY-FI:

simply-Fi Customer Service website http://simplyfiservice.candy-hoover.com

Wi-Fi Parameters & Product Information for Networked Equipment

Technology

Standard

Frequency Band(s) [MHz]

Maximum Power [mW]

Wi-Fi

IEEE 802.11b/g/n

2412÷2484

41.4

Product information for networked equipment

How to activate wirelessnetworkport:

standby if all wired network ports are connected

Power consumption of the product in networked

andall wirelessnetwork ports areactivated:

How to deactivate wirelessnetworkport:

2,0 W

If the oven is already enrolled : press “Extra” on the

timer display and select the Wi-Fi menu then press

the “<>” buttons, select On and press the select

button.

Ifthe wifi iconis on orblinks the wifimodule is on

If the oven is not enrolled : follow procedure for

enrolling

Ifthe wifi iconis off thewifi module isoff

To switch off the wifi press “Extra” on the timer

display and select the Wi-Fi menu then press the

“<>”buttons,select Off andpressthe select button.

GB 12

GB 13

T °C

default

180

220

210

40

T °C

range

40 ÷ 40

50 ÷ 240

50 ÷ 280

50 ÷ 230

50 ÷ 240

Function

Dial

Function (Depends on the oven model)

LAMP: Turns on the oven light.

Allow about tenminutes extra when cookingfoodsat the same time.

CHALEUR PULSÉE: We recommend you use this method for poultry, pastries,

fish and vegetables. Heat penetrates into the food better and both the cooking

and preheating times are reduced. You can cook different foods at the same

time with or without the same preparation in one or more positions. This

cookingmethod giveseven heat distributionand the smells arenot mixed.

CONVENTIONAL : Both top and bottom heating elements are used. Preheat

the oven for about ten minutes. This method is ideal for all traditional roasting

and baking. For seizing red meats, roast beef, leg of lamb, game, bread, foil

wrapped food (papillotes), flaky pastry. Place the food and its dish on a shelf in

mid position.

DEFROST: When the dial is set to this position. The fan circulates air at room

temperature around the frozen food so that it defrosts in a fewminutes without

the proteincontentof the foodbeing changed or altered.

*Tested in accordance with the EN 60350-1 for the purpose of energy consumption declaration and energy class.

3.2 Cooking Modes

BOTTOM HEATING + FAN: The bottom heating element is used with the fan

circulatingthe air inside the oven. This method is ideal for juicy fruit flans, tarts,

quiches and pâté.

It prevents food from drying and encourages rising in cakes, bread dough and

other bottom-cooked food.

Place the shelf in the bottomposition.

L3

L1 ÷ L5

GRILL: Use the grill with the door closed.

Grill: 2140 W Barbecue: 3340 W

The top heatingelement is used alone and youcan adjust the temperature. Five

minutes preheating is required to get the elements red-hot. Success is

guaranteed for grills, kebabs and gratin dishes. White meats should be put at a

distance from the grill; the cooking time is longer, but the meat will be tastier.

You can put red meats and fish fillets on the shelf with the drip tray underneath.

The oven hastwo grill positions:

200 150 ÷ 220

GRILL + FAN: Use the turbo-grillwith the door closed.

The top heating element is used with the fan circulating the air inside the oven.

Preheating is necessary forred meats but not for white meats. Ideal for cooking

thick fooditems, whole pieces such as roast pork, poultry, etc. Place the food to

be grilled directly on the shelf centrally, at the middle level. Slide the drip tray

under the shelf to collect the juices. Make sure that the food is not too close to

the grill. Turn the food overhalfwaythroughcooking.

BOTTOM HEATING: Using the lower element. Ideal for cooking all pastry based

dishes. Use this for flans, quiches, tarts, pate and any cooking that needs more

heatfrom below.

210 50 ÷ 230

*

GB 14

4. Oven cleaning and maintenance

4.1 General notes on cleaning

The lifecycle of the appliance can be extendedthrough regularcleaning. Waitforthe ovento cool before

carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for

cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based

detergents (ammonia).

GLASS PARTS

If dirty, the seal canbe cleanedwith a slightly damp sponge.

ACCESSORIES

DRIP PAN

After using the grill, remove the pan from the oven. Pourthe hot fatinto a container and wash the pan in

hot water, using a spongeand washing-up liquid.

OVENWINDOW SEAL

Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive

detergents.

If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan

in the dishwasheror use a commercial ovendetergent. Never put a dirty pan back intothe oven.

It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To

remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse

with water.

4.2 Self-cleaning oven with catalytic

Special self-cleaning panels covered in a micro-porous coating are available as optional extras for all

models. If they arefitted,the ovenno longer needs to be cleaned byhand.

It is a good idea to use deep roasting trays to roast fatty foods such as joints of meat etc. and to put a tray

underneath the grill to catch surplus fat.If the walls of the oven are so thickly coated in grease that the

catalytic lining is no longer effective remove surplus grease with a soft cloth or sponge soaked in hot

water.

The fat that is splattered onto the sides of the oven during roasting is eliminated by the microporous

coatingwhich breaksthe fat downby catalysisand transforms it intogas.

Excessive splattering may nevertheless block the pores and therefore hinder self-cleaning. The self-

cleaning capacity may be restored by switching on the empty oven to maximum for about 10-20

minutes.

Do not use abrasive products, metal cleaning wads, sharp objects, rough cloths, or chemical products

and detergents thatmay permanently damagethe catalyticlining.

The lining mustbe porous forself-cleaning to be effective.

N.B.: All catalytic linings currently on the market have a working life of about 300 hours. They should

thereforebe replaced afterabout 300 hours.

4.3 Maintenance

REMOVINGAND CLEANING WIRE RACKS

1. Remove the wire racks by pulling them in the direction of the arrows (see below)

1. Open the front window.

2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them

downwards.

REMOVAL OF THE OVEN WINDOW

3. Afterthe cleaning process installthe wire racksin reverse order.

3. Replacethe window by carrying out the procedure in reverse.

2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are

dried afterwards.

GB 15

On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the

left-handlateralhinge. In this way, the printed labelof the first glass will be inside the door.

1. Open the ovendoor.

2.3.4. Lock the hinges, remove the screwsand remove the upper metalcover bypullingit upwards.

REMOVAL AND CLEANING OF THE GLASS DOOR

5.6. Removethe glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove the

secondand third glass (if present)).

7. Atthe end of cleaning or substitution, reassemblethe parts in reverse order.

GB 16

5. Troubleshooting

5.1 FAQ

PROBLEM POSSIBLE CAUSE SOLUTION

The oven does not heat up

The clock is not set Set the clock

The child lock is on

A cooking function and

temperature has not been set

Deactivate the child lock

Ensure that the necessary

settings are correct

The oven does not heat up

GB 17

Steam and condensation on

the user interface panel

Clean with a microfiber

cloth the user interface

panel to remove the

condensation layer

No reaction of the touch

user interface

FR 18

Conseils De Securite

• Le nettoyage et l’entretien ne doivent pas être effectués par des enfants

sans surveillance.

L’appareil peut être utilisé par des enfants de plus de 8 ans et par des

personnes dont les capacités physiques, sensorielles ou mentales sont

limitées, sans expérience ni connaissance du produit, uniquement s’ils

sont surveillés ou s’ils ont été informés de la manière d’utiliser l’appareil,

en toute sécurité et qu’ils comprennent les risques possibles.

• AVERTISSEMENT : Les parties accessibles peuvent devenir très chaudes

quand le grill est en marche. Les enfants doivent être tenus à une distance

de sécurité.

• Les enfants de moins de 8 ans doivent rester à une distance de sécurité

de l’appareil s’ils ne sont pas surveillés en permanence.

• Pendant la cuisson, de l’humidité peut se condenser à l’intérieur de la

cavité ou sur la vitre de la porte. Il s’agit d’un phénomène normal. Pour

réduire cet effet, attendez 10-15 minutes après avoir allumé l’appareil

avant de mettre les aliments au four. La condensation disparaîtra de toutes

façons dès que le four aura atteint la température de cuisson.

• Cuisez les légumes dans un récipient avec couvercle plutôt que dans un

ustensile ouvert.

• Évitez de laisser des aliments à l’intérieur du four plus de 15-20 minutes

après cuisson.

• AVERTISSEMENT : L’appareil et ses parties accessibles chauffent pendant

l’utilisation.

Faites attention à ne pas toucher les parties chaudes.

• AVERTISSEMENT : Vérifiez que l’appareil est éteint avant de remplacer

l’ampoule, pour éviter le risque de chocs électriques.

• AVERTISSEMENT : Afin d’éviter tout risque lié à la réinitialisation

accidentelle de l’interrupteur thermique, l’appareil ne doit pas être

alimenté par un dispositif de commutation externe, tel qu’une minuterie,

ou relié à un circuit régulièrement allumé et éteint.

• Les enfants ne doivent pas jouer avec l’appareil.

FR 19

La fiche du câble d’alimentation et la prise d’alimentation doivent être

conformes aux normes en vigueur dans le pays d’installation.

Le conducteur jaune et vert de mise à la terre ne doit pas être bloqué par

le disjoncteur. La prise d’alimentation ou le disjoncteur multipolaire utilisé

pour le branchement doit rester à tout moment accessible après

installation de l’appareil.

• Le câble d’alimentation requis est le H05V2V2-F.

Il est possible de brancher l’appareil à la prise d’alimentation en installant

entre l’appareil et la prise d’alimentation un disjoncteur multipolaire qui

supporte la charge électrique maximale, conformément aux lois en

vigueur.

• Le débranchement doit se faire à l’aide soit de la prise d’alimentation,

soit d’un interrupteur installé sur le circuit électrique fixe, conformément

aux normes électriques.

• Utilisez uniquement la sonde à viande recommandée pour ce four.

• Si le câble d’alimentation est endommagé, il doit être remplacé par un

câble ou un faisceau de câbles spécial disponible auprès du fabricant ou du

service après-vente.

• N’utilisez pas un nettoyeur à vapeur pour le nettoyage.

• Coupez le four avant de retirer les pièces amovibles.

• Après le nettoyage, remontez-les selon les instructions.

• N’utilisez pas de matériaux rugueux ou abrasifs ou de racloirs

métalliques acérés pour nettoyer les vitres des portes des fours, car cela

pourrait rayer la surface et provoquer la rupture de la vitre.

• Branchez le câble d’alimentation sur une prise de courant qui supporte le

voltage (le courant et la charge sont indiqués sur l’étiquette) et vérifiez la

présence d’une mise à la terre. La prise d’alimentation doit supporter la

charge indiquée sur l’étiquette et être dotée d’une mise à la terre en état

de fonctionnement. Le conducteur de mise à la terre est jaune et vert.

Cette opération doit être exécutée par le personnel qualifié. En cas

d’incompatibilité entre la prise d’alimentation et la fiche du câble de

l’appareil, demandez à un électricien professionnel de remplacer la prise

d’alimentation par un dispositif compatible.

• Éliminez les éclaboussures importantes avant de procéder au nettoyage.

• Cette opération doit être exécutée par le personnel qualifié. Le

conducteur de mise à la terre (jaune et vert) doit être environ 10 mm plus

long que les autres conducteurs. Pour toutes réparations, contactez le

service après-vente en insistant sur l’utilisation de pièces de rechange

d’origine.

• AVERTISSEMENT : Ne recouvrez pas les parois du four avec du papier

aluminium ou une protection jetable disponible dans les magasins. Le

papier d’aluminium ou toute autre protection, en contact direct avec

l’émail chaud, risque de fondre et de détériorer l’émail de la cavité

intérieure.

• Aucune autre opération ni aucun autre réglage ne sont requis pour faire

fonctionner l’appareil aux fréquences nominales.

• Le non-respect des consignes ci-dessus peut compromettre la sécurité

de l’appareil et annuler la garantie.

• Une coupure de courant prolongée durant une phase de cuisson peut

engendrer un dysfonctionnement de l’écran. Dans ce cas, veuillez

contacter le service après-vente.

• L’appareil ne doit pas être installé derrière une porte décorative, pour

éviter la surchauffe.

• Pour introduire la grille dans le four, vérifiez que le butoir est dirigé vers le

haut et au fond de la cavité. La grille doit être complètement insérée dans

la cavité.

• PRUDENCE : Ne remplissez pas le fond de la cavité avec de l’eau pendant

la cuisson ou lorsque le four est chaud.

• AVERTISSEMENT : N’enlevez jamais le joint de la porte du four.

FR 20

Strona się ładuje...

Candy FCE 848 VX WF/E Instrukcja obsługi

Candy FCE 848 VX WF/E Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty