Siemens TI303203RW Instrukcja obsługi

en Instruction manual ....................................................................... 5

fr Mode d’emploi ........................................................................... 28

nl Gebruiksaanwijzing .................................................................... 52

pl Instrukcja obsługi ....................................................................... 75

cs Návod k použití ........................................................................ 100

UX ΙκΪάβεΪιθεφαθάΪηβω ............................................................ 123

Fully automatic espresso machine

Machine à expresso automatique

Volautomatische espressomachine

Ekspres do kawy

Plně automatický kávovar

Автоматическая кофемашина

TI 303, TI 305

!

"



#

$

FOLFN

, ,, ,,,

,9 9 9,





, ,, ,,,

%

&

, ,, ,,,

,9 9 9,

, ,, ,,,

en

5

Table of contents

enInstruction manual

8 Intended use. . . . . . . . . . . . . . . . . 6

( Important safety information . . . 6

7 Environmental protection . . . . . . 8

Saving energy. . . . . . . . . . . . . . . . . . . 8

Environmentally-friendly disposal . . . . 8

* Getting to know your appliance . 8

Included in delivery. . . . . . . . . . . . . . . 8

Assembly and components . . . . . . . . 9

Controls . . . . . . . . . . . . . . . . . . . . . . . 9

_ Accessories . . . . . . . . . . . . . . . . 10

K Before using for the first time. . 11

Installing and connecting the

appliance . . . . . . . . . . . . . . . . . . . . . 11

Commissioning the appliance . . . . . 11

1 Operating the appliance . . . . . . 12

Preparing coffee using freshly

ground beans . . . . . . . . . . . . . . . . . . 12

Preparing drinks with milk . . . . . . . . 13

Adjusting beverage settings . . . . . . . 14

Water filter . . . . . . . . . . . . . . . . . . . . 15

Frost protection. . . . . . . . . . . . . . . . . 16

1 Settings. . . . . . . . . . . . . . . . . . . . 16

Automatic switch-off . . . . . . . . . . . . . 16

Switching the audible signal on/off. . 17

Setting the language. . . . . . . . . . . . . 17

Setting the water hardness . . . . . . . . 17

Factory reset. . . . . . . . . . . . . . . . . . . 18

D Daily care and cleaning . . . . . . 19

Cleaning agent . . . . . . . . . . . . . . . . . 19

Cleaning the appliance . . . . . . . . . . . 19

Cleaning the drip tray and coffee

grounds container . . . . . . . . . . . . . . . 20

Cleaning the milk system . . . . . . . . . 20

Cleaning the brewing unit . . . . . . . . . 21

. Service programmes. . . . . . . . . 22

Starting Calc’nClean . . . . . . . . . . . . . 23

3 Trouble shooting . . . . . . . . . . . . 24

4 Customer service . . . . . . . . . . . 27

Technical data. . . . . . . . . . . . . . . . . . 27

E number and FD number . . . . . . . . 27

Guarantee . . . . . . . . . . . . . . . . . . . . . 27

en Intended use

6

8 Intended use

Intended use

Check the appliance for

damage after unpacking it. Do

not connect the appliance if it

has been damaged in

transport.

This appliance is intended for

domestic use only.

Only use the appliance indoors

at room temperature and up to

2000 m above sea level.

( Important safety

information

Important safety information

Please read carefully, follow

and retain the operating

instructions. When passing on

the appliance, enclose these

instructions.

This appliance can be used by

children aged from 8 years and

above and by persons with

reduced physical, sensory or

mental capabilities or lack of

experience and knowledge if

they have been given

supervision or instruction

concerning use of the

appliance in a safe way and if

they understand the hazards

involved. Keep children under

8 years of age away from the

appliance and connecting

cable and do not allow them to

use the appliance. Children

shall not play with the

appliance. Cleaning and user

maintenance shall not be made

by children unless they are

older than 8 years and

supervised.

Important safety information en

7

:Warning

Danger of electric shock!

■ The appliance may only be

connected to a power supply

with alternating current via a

correctly installed socket

with earthing. Ensure that the

protective conductor system

of the domestic electricity

supply has been correctly

installed.

Risk of electric shock!

■ Connect and operate the

appliance only in

accordance with the

specifications on the rating

plate. If the power cord of

this appliance is damaged, it

must be replaced by

customer service.

Risk of electric shock!

■ Do not use if the power

cable or appliance is

damaged. If a fault occurs,

pull the mains plug or switch

off the mains voltage

immediately.

Risk of electric shock!

■ To prevent hazards, the

appliance may be repaired

by our customer service

only.

Risk of electric shock!

■ Never immerse the

appliance or mains cord in

water.

:Warning

Hazard due to magnetism!

The appliance contains

permanent magnets which may

affect electronic implants, e.g.

heart pacemakers or insulin

pumps. Persons with electronic

implants should keep a

minimum distance of 10 cm

from the appliance and the

water tank when removed.

:Warning

Risk of suffocation!

Do not let children play with

packaging material. Store small

parts safely as they can be

easily swallowed.

:Warning

Risk of burns!

■ The milk system becomes

very hot. After use, allow it to

cool down first before

touching it.

Risk of burns!

■ After use, surfaces such as

the cup warmer may still be

hot for a certain period.

:Warning

Risk of injury!

■ Improper use of this

appliance may result in

injury.

Risk of injury!

■ Do not reach into the

grinding unit.

en Environmental protection

8

7 Environmental

protection

Environmental protection

Saving energy

■ If the appliance is not being used,

switch it off.

■ Set the interval for automatic

switch-off to the smallest value.

■ If possible, do not interrupt coffee or

milk froth dispensing. Stopping a

process prematurely results in

higher energy consumption and the

drip tray fills up more quickly.

■ Descale the appliance regularly to

avoid a build-up of limescale.

Limescale residue results in higher

energy consumption.

Environmentally-friendly

disposal

Dispose of packaging in an

environmentally-friendly manner.

Please ask your dealer about current

disposal routes.

* Getting to know your

appliance

Getting to know your appliance

This section provides an overview of the

scope of delivery, the assembly and the

components of your appliance. It also

introduces you to the different controls.

Note: Depending on the appliance

model, individual details and colours

may differ.

How to use these instructions:

The cover pages of the operating

instructions can be folded out towards

the front. The illustrations are identified

using numbers that are referred to in the

operating instructions.

Example: ~ Fig. !

Included in delivery

~ Fig. !

This appliance is labelled in

accordance with European

Directive 2012/19/EU

concerning used electrical and

electronic appliances (waste

electrical and electronic

equipment - WEEE). The

guideline determines the

framework for the return and

recycling of used appliances

as applicable throughout the

EU.

# Fully automatic coffee machine

+ Water hardness testing strip

3 Instruction manual

; Milk frother

Getting to know your appliance en

9

Assembly and components

~ Fig. "

Controls

By touching the fields, you can e.g.

select and start making a drink or adjust

the coffee strength.

( On / off button (stand-by mode)

0 Display

8 Control panel

@ Handle of milk frother

H Outlet system for coffee, height

adjustable

P Milk frother (holder, frother, cover),

height adjustable

X Drip tray (coffee grounds

container, drip grate, drip plate,

float)

` Door of brewing chamber

h Rating plate

)" Brewing unit

)* Aroma lid

)2 Bean container

): Rotary selector for setting grinding

level

)B Cover for water tank

)J Water tank

)R Cup warmer

Button Meaning

k

Switch the appliance on and off

The appliance rinses automatically when it is switched on and off.

The appliance is not rinsed if:

■ it is still warm when switched on, or

■ coffee was not dispensed before the appliance was switched off.

The appliance is ready for use when the LEDs of the buttons for selecting drinks light

up in the control panel. The appliance has automatic switch-off. ~ "Selecting

automatic switch-off" on page 16

espresso Dispensing Espresso

caffe crema Dispensing Caffe crema

or display navigation “¾” (back without saving).

cappuccino Dispensing cappuccino

or display navigation “V” (navigate down).

latte macchiato Dispensing latte macchiato

or display navigation “ok” (confirm and save).

milk Frothing up milk

%

Coffee strength

Adjusting the coffee strength ~ "Operating the appliance" on page 12

calc’nClean Start the service programme

Flashes when the service programme needs to be performed.~ "Calc’nClean

service programme" on page 23

#

Make 2 Espresso or 2 Caffe crema at the same time. Position the cups next to one

another under the coffee dispenser.~ "Operating the appliance" on page 12

en Accessories

10

--------

Display

The display 0 shows the selected

drinks, settings and setting options, as

well as messages about the appliance’s

operating status.

The display also prompts the user to

perform certain actions.

The individual steps for performing the

action are shown in the display.

If the action required has been carried

out, e.g. "Fill water tank", the

corresponding message will disappear.

_ Accessories

Accessories

The following accessories are available

from retailers or from customer service:

--------

The contact data for customer service in

all countries can be found at the back of

these instructions.

&

The fully automatic coffee machine has a cup warmer that can be switched on or off

manually with the button. When the cup warmer is on, the button lights up.

:Warning

Risk of burns!

The cup warmer becomes very hot!

Note: For optimal cup warming, place them with the base on the cup warmer.

Display

)

Lights up when the water tank needs to be topped up with water, the water tank is not

inserted, or the water filter needs to be changed. A message appears on the display.

(

Lights up when trays need to be emptied.

Flashes when door of brewing chamber is open.

is continu-

ously lit

Ready to use, selection possible

is pulsing Dispensing underway

is flashing Waiting for operation, e.g. with calc’nClean

off Not available

Accessory Order number

Retail Customer ser-

vice

Cleaning tablets TZ80001 00311807

Descaling tablets TZ80002 00576693

Water filter TZ70003 00575491

Care set TZ80004 00576330

Before using for the first time en

11

K Before using for the

first time

Before using for the first time

In this section, you will learn how to

commission your appliance.

Note: Only use the appliance in

frost-free areas. If the appliance was

transported or stored at temperatures

below 0 °C, you must wait for at least 3

hours before using it.

Installing and connecting the

appliance

1. Remove any protective plastic film.

2. Place the appliance on a level,

water-resistant surface which can

bear the weight.

3. Using the mains plug, connect the

appliance to an earthed socket that

has been correctly installed.

Note: After plugging in, always wait

(approx. 5 seconds).

Commissioning the appliance

Filling the bean container

This appliance can be used to make

coffee drinks from coffee beans.

1. Open the lid )* of the bean

container )2.

2. Pour in the beans.

3. Close the lid again.

Notes

■ The coffee beans are freshly ground

for each brewing.

■ The coffee beans just be sealed and

stored in a cool place to retain

optimum quality.

■ Coffee beans can be stored in the

bean container for a number of days

without losing their aroma.

Filling the water tank

Important: Fill the water tank with fresh,

cold, still water on a daily basis. Prior to

operation, check whether the water tank

has been sufficiently filled.

1. Carefully remove the cover of the

water tank.

2. Use the handle to remove the water

tank.

3. Fill the water tank with water up to

the "max" marking.

4. Put the water tank back in the holder

again, keeping it straight, and fit the

cover of the water tank.

Setting the language

1. Switch on the appliance with

the k button.

The preset language appears in the

display.

2. Touch the “V” button cappuccino

repeatedly until the required

language appears on the display.

3. Touch the “ok” button latte

macchiato to confirm the setting.

The appliance rinses and is ready to

use when "Choose beverage" appears

in the display.

Notes

■ Language selection only appears

automatically when the appliance is

switched on for the first time.

■ You can change the language at any

time. ~ "Settings" on page 16

en Operating the appliance

12

General information

The factory settings of the fully

automatic coffee machine are

programmed for optimal performance.

■ The appliance switches off

automatically after a specific time.

■ Whenever a button is pressed, a

signal sounds. It can be switched

off.~ "Settings" on page 16

■ When the appliance is used for the

first time, after running a service

programme or has not been

operated for a long period, the first

beverage will not have the full aroma

and should not be consumed.

■ After commissioning the appliance,

you will only achieve a suitably thick

and stable "crema" after the first few

cups have been dispensed.

■ If the appliance is in use for a long

period of time, water droplets will

form on the ventilation slots. This is

normal.

■ Escaping steam is not a fault but

due to the design of the machine.

Before using your new appliance, you

should check and select the water

hardness.~ "Settings" on page 16

1 Operating the

appliance

Operating the appliance

In this section, you will learn how to

make drinks with coffee and milk.It

contains information about settings,

water filters and adjustment of the

grinding level.

Preparing coffee using freshly

ground beans

You can choose between Espresso and

Caffe crema. ~ "Preparing drinks with

milk" on page 13

The appliance is switched on. The water

tank and bean container have been

filled.

1. Place a cup under the outlet system.

2. Touch % repeatedly to select

the required coffee strength.

3. Touch the espresso or caffe crema

button.

The coffee is brewed and then

dispensed into the cup.

Note: To stop dispensing the drink

before the end, touch espresso or caffe

crema again.

Operating the appliance en

13

Preparing drinks with milk

This appliance has a milk frother. You

can make drinks of coffee with milk or

froth up milk.

Note: Dried milk residues are difficult to

remove so always perform

cleaning.~ "Daily care and cleaning"

on page 19

:Warning

Risk of burns!

The milk frother gets very hot. Hold only

by the handle. After use, let it cool down

first before touching it.

Coffee drinks with milk

You can choose between cappuccino

and latte macchiato. When doing so,

please check the position of the coffee

dispenser and milk frother.

The appliance is switched on. The water

tank and bean container have been

filled.

1. Fill a large cup or a large glass with

approx. 100 ml milk for cappuccino

and approx. 150 ml milk for latte

macchiato.

2. Place a cup or a glass under the

outlet system.

3. Push the coffee dispenser and milk

frother right down.

4. Touch % repeatedly to select

the required coffee strength.

5. Touch the cappuccino or latte

macchiato button.

The milk is first frothed up in the cup or

glass. The coffee is then brewed and

dispensed into the cup or glass.

Note: To stop current dispensing of the

drink before the end, touch cappuccino

or latte macchiato again.

Frothing up milk

The appliance is switched on. The water

tank and bean container have been

filled.

1. Fill a large cup or a large glass with

approx. 100 ml milk.

2. Place a cup or a glass under the

outlet system.

3. Push the coffee dispenser and milk

frother right down.

4. Touch the milk button.

The milk is frothed up.

Note: To stop the process before the

end, touch milkagain.

Cappuccino

Latte macchiato

en Operating the appliance

14

Adjusting beverage settings

Preparing two cups at once

Before making a drink, you can select

dispensing of two cups at once.

Touching # switches the function on

or off.

"Double cup on" or "Double cup off"

lights up in the display for 5 seconds.

The Double cup function is only

possible for espresso and caffe crema;

the buttons light up. Dispensing other

drinks is not possible while the Double

cup function is switched on.

Notes

■ The drinks are prepared in two steps

(two grinding operations). Please

wait until the process is fully

completed.

■ If no button is pressed within 90

seconds, the appliance automatically

switches to the setting "Double

cup off".

Coffee strength

Before making a drink, you can adjust

the coffee strength:

To do so, touch % to select the

strength you require.

Note: The coffee strength selected is

then active for all drinks made with

coffee.

Filling level

You can adjust the filling level of your

drinks.

Press and hold espresso or caffe

crema for 3 seconds.

Dispensing takes place, with the button

selected flashing.

Progress is shown on the display:

Once the required filling level is

reached, touch the button selected to

stop. The new filling level is only

apparent after the next drink is

dispensed.

Note: The filling level can be selected

either for Espresso (25 - 60 ml) or Caffe

crema (80 - 200 ml).A minimum

quantity is always brewed: Espresso

approx. 25 ml and Caffe crema

approx. 80 ml.

Frothing time

You can adjust the frothing time of your

drinks.

Press and hold cappuccino, latte

macchiato or milk for 3 seconds.

The milk is frothed up, and the button

selected flashes.

Progress is shown on the display:

Once the required frothing time is

reached, touch the button selected to

stop.

Note: Setting the frothing time has no

impact on the amount of coffee.

very mild

mild

regular

strong

very strong

only with TI305:

aromaIntense

Operating the appliance en

15

Setting the grinding level

This appliance features an adjustable

grinder. This enables the grinding level

of the coffee to be individually changed.

:Warning

Risk of injury!

Do not reach into the grinding unit.

Caution!

The appliance may be damaged! Only

adjust the grinding level when the

grinder is running!

When the grinder is in operation, use

the rotary selector ): to set the

grinding level.

■ Finer grinding level: turn

anticlockwise. (Fig. a)

■ Coarser grinding level: turn

clockwise. (Fig. b)

Notes

■ The new setting will not become

apparent until the second cup of

coffee.

■ For dark roast coffee beans, choose

a finer grinding level; for lighter

beans, choose a coarser grinding

level.

Water filter

~ Fig. &

A water filter lessens limescale

deposits, reduces impurities in water

and improves the taste of the coffee.

Water filters are available from retailers

or from customer service.

Inserting or replacing a water filter

A new water filter must be rinsed before

it can be used.

The appliance is switched on. The water

tank has been filled.

1. Press and hold % and

calc’nClean for at least 3 seconds.

2. Touch the “V” button cappuccino

repeatedly until "W. hardness"

appears.

3. Confirm by pressing the “ok” button

latte macchiato.

4. Press the “V” button cappuccino

repeatedly until "Water filter"

appears.

5. Confirm by pressing the “ok” button

latte macchiato.

The display shows "Filter act.".

6. Immerse the water filter (opening up)

in a container filled with water until

no more air bubbles rise to the

surface.

7. Then press the water filter firmly into

the empty water tank.

8. Fill the water tank with water up to

the "max" marking.

9. Place a container with a capacity of

1.0 litre under the outlet.

10. Touch the “ok” button latte

macchiato to save the setting and

start rinsing.

11. Touch the “¾” button caffe crema to

exit the menu.

12. Then empty the container. The

appliance is ready for use again.

Removing the water filter

If the water filter has been removed and

no new one inserted, please select the

appropriate water hardness as

described in the section "Settings -

Setting the water hardness".

D E

en Settings

16

Frost protection

To prevent frost damage during

transportation and storage, the

appliance must be completely emptied

beforehand.

Info: The appliance must be ready for

use and the water tank filled.

1. Place a large container under the

outlet of the milk frother and push

the frother down.

2. Press the milk button.

The LED in the button flashes, and

the appliance now heats up.

3. As soon as steam escapes from the

milk frother, remove the water tank.

4. Allow the appliance to cool down.

Wait until ) "Water tank empty"

appears.

5. Use the k button to switch the

appliance off.

6. Empty the water tank and the drip

tray.

1 Settings

Settings

This appliance has different factory

settings. You can customise the settings

on the appliance.

Note: If no button is pressed within

90 seconds, the appliance switches to

"Choose beverage" without saving. The

previous setting remains unchanged.

You can select the following settings:

Automatic switch-off

Selecting automatic switch-off

The appliance switches off automatically

at a specific time after the last button

was pressed. This time can be selected,

with settings from 15 minutes to

4 hours possible here.

1. Press and hold % and

calc’nClean for at least 3 seconds.

2. Touch the “V” button

cappuccinorepeatedly until "Auto

Stand-by" appears.

3. Confirm by pressing the “ok” button

latte macchiato.

The setting is saved.

4. Touch the “V” button cappuccino

and select the time. The following

settings are possible:

– after 15 min.

– after 30 min. (factory setting)

– after 1 hour

– after 2 hours

– after 4 hours

5. Confirm by pressing the “ok” button

latte macchiato.

The setting is saved.

6. Touch the “¾” button caffe crema to

exit the menu.

Settings en

17

Switching the audible signal

on/off

Whenever a button is pressed, an

audible signal sounds.

This can be switched on or off.

1. Press and hold % and

calc’nClean for at least 3 seconds.

2. Touch the “V” button cappuccino

repeatedly until "Sound" appears.

3. Confirm by pressing the “ok” button

latte macchiato.

The setting is saved.

4. Touch the “V” button cappuccino

and select "Sound on" or "Sound

off".

5. Confirm by pressing the “ok” button

latte macchiato.

The setting is saved.

6. Touch the “¾” button caffe crema to

exit the menu.

Setting the language

1. Press and hold % and

calc’nClean for at least 3 seconds.

2. Touch the “V” button cappuccino

repeatedly until "Language" appears.

3. Confirm by pressing the “ok” button

latte macchiato.

The setting is saved.

4. Touch the “V” button cappuccino

and select the required language.

5. Confirm by pressing the “ok” button

latte macchiato.

The setting is saved.

6. Touch the “¾” button caffe crema to

exit the menu.

Setting the water hardness

It is important to set the water hardness

correctly so that the appliance indicates

in good time when the descaling

programme should be run. The preset

water hardness is level 4.

You can check the water hardness

using the enclosed test strip or by

asking your local water supplier.

1. Briefly immerse the enclosed test

strip in fresh tap water, leave it to

drip and read off the result after 1

minute.

The number of fields on the test strip

that change colour indicate the water

hardness level.

2. Press and hold % and

calc’nClean for at least 3 seconds.

3. Touch the “V” button cappuccino

repeatedly until "W. hardness"

appears.

4. Touch the “ok” button latte

macchiato and confirm.

5. Touch the “V” button cappuccino

and select the water hardness. The

following settings are possible:

– W. hardness 1

– W. hardness 2

– W. hardness 3

– W. hardness 4 (factory setting)

– Water filter (when used)

– H2O-Softener (setting if water

softener available)

6. Touch the “ok” button latte

macchiato to save the setting.

7. Touch the “¾” button caffe crema to

exit the menu.

en Settings

18

The table shows the allocation of the

levels to the different degrees of water

hardness:

Subsequent changes to the water

hardness can be made at any time.

Note: When using the water filter (see

section "Accessories"), proceed as

follows ~ "Water filter" on page 15.

Factory reset

If you set the appliance back to the

factory settings, you will lose your own

settings.

1. Press and hold % and

calc’nClean for at least 3 seconds.

2. Touch the “V” button cappuccino

repeatedly until "Factory reset"

appears.

3. Confirm by pressing the “ok” button

latte macchiato.

The setting is saved.

4. Touch the “¾” button caffe crema to

exit the menu.

Level Degree of water hardness

German (°dH) French (°fH)

1 1-7 1-13

2 8-14 14-25

3 15-21 26-38

4 22-30 39-54

Daily care and cleaning en

19

D Daily care and

cleaning

Daily care and cleaning

With good care and cleaning, your

appliance will remain fully functioning

for a long time to come. In this section,

you will learn how to correctly clean and

care for your appliance.

:Warning

Risk of electric shock!

Before cleaning the appliance, pull out

the mains plug. Never immerse the

appliance in water. Do not use a steam

cleaner.

Cleaning agent

Please observe the following

information to ensure that the different

surfaces are not damaged by using the

wrong type of cleaning agent.

Do not use:

■ Harsh or abrasive cleaning agents.

■ Any cleaning agents containing

alcohol or spirits.

■ Hard scouring pads or sponges.

Notes

■ New sponge cloths may contain

salts. Salts can cause rust film on

stainless steel. Wash new sponge

cloths thoroughly before use.

■ Always remove any limescale,

residues of coffee or milk, cleaning

or descaling solution

immediately.This residue may cause

corrosion.

Caution!

Not all of the appliance's components

can be cleaned in the dishwasher.

~ Fig. $ - &

Cleaning the appliance

1. Wipe the outside of the appliance

with a soft, damp cloth.

2. Clean the control panel using a

micro-fibre cloth.

Notes

■ If the appliance is cold when

switched on, or if it is switched off

after dispensing coffee, it rinses

automatically.The system is therefore

self-cleaning.

■ If the appliance has not been used

for a long period of time (e.g. while

you are on holiday), clean the entire

appliance thoroughly, including the

milk frother and brewing unit.

9

Not dishwasher-safe:

Water tank

Cover for water tank

Aroma lid

Brewing unit

Drip tray

Dishwasher-safe:

max.

60°C

Drip plate

Drip grate

Coffee grounds container

Float

Milk frother

Cover for milk frother

en Daily care and cleaning

20

Cleaning the drip tray and

coffee grounds container

~ Fig. $

Note: The drip tray and coffee grounds

container should be emptied and

cleaned every day in order to prevent

deposits.With frequent use also empty

from time to time, as soon as the float is

clearly visible, or the relevant message

appears in the display.

1. Open the door.

2. Pull the drip tray with the coffee

grounds container forwards and out.

3. Remove the drip plate with grate.

4. Empty and clean the drip tray and

coffee grounds container.

5. Wipe out the inside of the appliance

(area of drip tray).

Cleaning the milk system

~ Fig. %

The milk system must be cleaned after

each use to remove residues.

:Warning

Risk of burns!

The milk frother gets very hot. Hold only

by the handle. After use, let it cool down

first before touching it.

1. Fill a glass half-full with water and

place under the outlet system.

2. Push the milk frother right down.

3. Touch the milk button to clean the

milk system.

4. Push the milk frother right up and

allow it to cool down.

5. Dismantle the milk frother into its

individual parts and clean

thoroughly.

6. Dry the individual parts, reassemble

and fit back onto the appliance.

Notes

■ To stop the process before the end,

touch milk again.

■ All parts of the milk system should

be cleaned in the dishwasher.

Detergent residues in the milk

system must be thoroughly removed

following the rinsing process.

Strona się ładuje...

Siemens TI303203RW Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Siemens TI303203RW Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty