Bissell PowerSteamer 1697 Series Instrukcja obsługi

Marka: Bissell

Model: PowerSteamer 1697 Series

Kategoria: Odkurzacze parowe

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

PowerSteamer 8804 Series

Thank You

USER'S GUIDE

1697, 8804 SERIES

Safety Instructions

Product View

Assembly

Special Features

Operations

Maintenance & Care

Product Registration

Troubleshooting

Consumer Care

4-5

7-8

8-13

14-15

16-17

Replacement Parts

Warranty

Earn BISSELL Rewards!

product today!

See details on

back page

www.bissell.com 800.237.7691

Thanks for buying a BISSELL Deep Cleaner

We’re glad you purchased a BISSELL deep cleaner. Everything we know

about floor care went into the design and construction of this complete,

high-tech home cleaning system.

Your BISSELL deep cleaner is well made, and we back it with a limited one

year warranty. We also stand behind it with a knowledgeable, dedicated

Consumer Care department, so, should you ever have a problem, you’ll

receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL

is a global leader in the design, manufacture, and service of high quality

homecare products like your deep cleaner.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

Chairman & CEO

www.bissell.com 800.237.7691

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical

appliance, basic precautions

should be observed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

YOUR DEEP CLEANER.

WARNING:

To reduce the risk of fire,

electric shock, or injury:

■

Do not immerse.

■

Use only on surfaces moistened by the cleaning process.

■

Always connect to a properly grounded outlet.

■

See Grounding Instructions.

■

Unplug from outlet when not in use and before conducting

maintenance or troubleshooting.

■

Do not leave machine when it is plugged in.

■

Do not service machine when it is plugged in.

■

Do not use with damaged cord or plug.

■

If appliance is not working as it should, has been dropped,

damaged, left outdoors, or dropped into water, have it repaired at

an authorized Service Center.

■

Use indoors only.

■

Do not pull or carry by cord, use cord as a handle, close door on

cord, pull cord around sharp corners or edges, run appliance over

cord, or expose cord to heated surfaces.

■

Unplug by grasping the plug, not the cord.

■

Do not handle plug or appliance with wet hands.

■

Do not put any object into appliance openings, use with blocked opening, or

restrict air flow.

■

Do not expose hair, loose clothing, fingers or body parts to

openings or moving parts.

■

Do not pick up hot or burning objects.

■

Do not pick up flammable or combustible materials (lighter fluid, gaso-

line, kerosene, etc.) or use in the presence of explosive liquids or vapor.

■

Do not use appliance in an enclosed space filled with vapors

given off by oil base paint, paint thinner, some moth proofing

substances, flammable dust, or other explosive or toxic vapors.

■

Do not pick up toxic material (chlorine bleach, ammonia, drain

cleaner, gasoline, etc.).

■

Do not modify the 3-prong grounded plug.

■

Do not allow to be used as a toy.

■

Do not use for any purpose other than described in this User’s Guide.

■

Do not unplug by pulling on the cord.

■

Use only manufacturer’s recommended attachments.

■

Use only cleaning products formulated by BISSELL for use in this

appliance to prevent internal component damage. See the cleaning

fluid section of this guide.

■

Keep openings free of dust, lint, hair, etc.

■

Do not point attachment nozzle at people or animals

■

Keep appliance on a level surface.

■

Turn off all controls before unplugging.

■

Unplug before attaching the TurboBrush

■

Be extra careful when cleaning stairs.

■

Close attention is necessary when used by or near children.

■

Always install float before any wet pick up operation.

■

Do not operate the appliance unless the belt door is securely

assembled in the location provided.

SAVE THESE

INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE

ONLY.

GROUNDING

INSTRUCTIONS

This appliance must be connected to

a grounded wiring system. If it should

malfunction or break down, grounding

provides a safe path of least resistance

for electrical current, reducing the risk of

electrical shock. The cord for this appli-

ance has an equipment-grounding con-

ductor and a grounding plug. It must only

be plugged into an outlet that is properly

installed and grounded in accordance

with all local codes and ordinances.

WARNING:

Improper connection of the equipment-

grounding conductor can result in a risk

of electrical shock. Check with a qualified

electrician or service person if you aren’t

sure if the outlet is properly grounded.

DO NOT MODIFY THE PLUG. If it will

not fit the outlet, have a proper outlet

installed by a qualified electrician. This

appliance is designed for use on a nomi-

nal 120-volt circuit, and has a grounding

attachment plug that looks like the plug in

the drawing above. Make certain that the

appliance is connected to an outlet hav-

ing the same configuration as the plug.

No plug adapter should be used with this

appliance.

Grounded

Outlets

Grounding Pin

www.bissell.com 800.237.7691

Product view

Optional Accessories

These items are available for purchase with your model. To order replacement parts or

additional tools or formulas, please refer to page 19.

Spraying

Crevice Tool

3” Tough Stain Tool

4” Upholstery Tool TurboBrush

Hard Floor Tool

Mesh Tool Bag

(bag only)

TurboBrush

Storage

(Select Models)

SmartMix

Switch

SmartMix

Tank

DirtLifter

PowerBrush

Floor Nozzle

Window

Belt Access Door

ReadyTools

™

Dial

Flow Indicator

(Filter Inside)

Lower Handle

www.bissell.com 800.237.7691

Product view

Cleaning fluid

Keep plenty of genuine BISSELL 2X formula on hand so

you can clean and protect whenever it fits your schedule.

Always use genuine BISSELL deep cleaning formulas.

Non-BISSELL cleaning solutions may harm the machine

and will void the warranty.

BISSELL

Deep Clean

and Protect

Formula

with

Scotchgard

™

Protector

BISSELL Pet

Stain & Odor

Removal

Formula with

Scotchgard™

Protector

BISSELL

Spring Breeze

Formula with

Scotchgard™

Protector

BISSELL

Hard Floor

Solutions™

Formula

BISSELL

Tough Stain

PreCleaner™

BISSELL

Professional

Deep Cleaning

Formula with

Scotchgard™

Protector

Trigger

Upper

Handle

Tool Caddy

Power Cord

Quick Release

Tough Stain

Brush Storage

Flex

Hose

Storage

Clip

Hex Nuts

4" Upholstery

Tool Storage

(Select Models)

Flex Hose

Handle

Release

2-in-1

water

tank™

Power

Switch

WARNING:

To reduce the risk of fire and

electric shock due to internal

component damage, use only

BISSELL cleaning fluids intended

for use with the deep cleaner.

www.bissell.com 800.237.7691

Assembly

Your PowerSteamer comes in three, easy to

assemble components:

Upper Handle

Lower Handle

Tool Caddy

The only thing you will need to assemble your

cleaner is a Phillips head

screwdriver.

1. Slide upper handle onto lower handle.

2. Feed bundled power cord through tool

caddy from caddy’s flat side.

3. Align upper handle holes and tool

caddy holes.

4. Place hex nut into back of tool caddy

and hold in place. Insert bolt from front

to back turning into the hex nut until

snug. Do not over tighten. Repeat for

the second bolt and hex nut.

5. Insert 2 screws into lower 2 holes.

Turn until snug.

6. Snap tools into storage on the tool

caddy.

7. Wrap power cord and flex hose as

shown in figure 7.

PowerSteamer assembly is now complete.

OFF

1. 2.

3. 4.

5. 6.

WARNING:

Do not plug in your cleaner until

you have completely assembled

it per the following instructions

and are familiar with all instruc-

tions and operating procedures.

www.bissell.com 800.237.7691

Special Features

Your BISSELL PowerSteamer is a home cleaning

system that uses a combination of hot tap water,

BISSELL advanced cleaning formula and suction

to safely clean carpets and upholstery.

DirtLifter

PowerBrush

The DirtLifter PowerBrush is designed to

enhance cleaning performance. The bristle

pattern safely lifts out the deep down dirt while

gently grooming carpet fibers. The floating sus-

pension self-adjusts to all carpet heights. When

the power is ON ( I ) and the machine is in

the upright position, your carpet is protected

because the brushes are lifted up off the carpet.

SmartMix

The SmartMix feature automatically mixes hot

tap water with the BISSELL advanced cleaning

formula. Simply choose one of the 3 settings

(high traffic, normal, or water only) and the

PowerSteamer will adjust the right amount of

cleaning solution to mix with the water to fit

your cleaning need.

When your cleaning job is finished, the formula

can be stored ready to use in your machine for

the next time!

2-in-1 water tank

Our 2-in-1 water tank system is designed with a

heavy duty bladder inside for clean water. As you

clean, the clean water in the bladder will empty

and mix with the cleaning formula. Dirty water

pulled out of your carpets will collect around the

outside of the bladder so that clean and dirty

water are always kept separate. This allows the

user to maximize tank space, yet only carry one

tank to and from the sink for emptying and filling.

EXIT

START

HERE

SmartMix bottle

www.bissell.com 800.237.7691

Special Features

Operations

Flow indicator

This is located on the machine base. It spins

when the trigger is pressed to indicate that

the machine is applying cleaning solution to

the carpet and will stop spinning when the

SmartMix tank or Bladder needs to be refilled,

or when the trigger is released.

Note: Flow indicator does not

spin when spraying through the

attachment hose.

ReadyTools dial

This provides either floor cleaning or above

the floor cleaning with the flip of a switch. If

choosing above floor cleaning for upholstery,

stairs, or along the baseboards, choose the

attachment appropriate for the job. Attach tool

to the hose, and you are ready to go!

1. Plan activities to give your carpet time to dry.

2. Move furniture to another area if cleaning

an entire room (optional).

3. Thoroughly vacuum area with a dry

vacuum cleaner before deep cleaning.

4. Plan your cleaning route to leave an exit

path. It is best to begin cleaning in the

corner farthest from your exit.

5. Pretreating (optional)

NOTE: Pretreating is recommended

to improve cleaning effectiveness

for heavily soiled carpet in high

traffic areas such as entryways

and hallways.

a. Spray the BISSELL Tough Stain Pre-treat

formula onto heavy traffic areas, soiled

areas, or stains.

b. Allow to penetrate for at least 3 minutes.

c. Following the instructions below, clean

as normal, using the BISSELL PowerSteamer

machine on the high traffic setting.

ATTENTION:

Some Berber carpets have a

tendency to fuzz with wear.

Repeated strokes in the same

area with an ordinary vacuum

or deep cleaner may aggravate

this condition. Please see Stain

Removal instructions on page 12.

TIO

START

HERE

——— 4'———

EXIT

——— ———

TOOLS

PRETREAT

FLOOR

CLEANING

OFF

Flow Indicator



TOOLS

PRETREAT

FLOOR

CLEANING

ReadyTools Dial

www.bissell.com 800.237.7691

Operations

Fill the 2-in-1 water tank

1. Release the handle and lay the machine

handle back to access the Tank.

2. Remove the tank from the base of the

machine by lifting the tank carry handle.

3. Carry like a bucket to the sink. Rotate the

handle forward to unlatch the lid. Lift off

and set the lid aside.

4. Fill up the bladder with clean hot

tap water. *Do not boil or

microwave water as it can

destroy the bladder.

5. Replace the top of the tank by matching

the lid and tank edges. Handle must

be in the forward position in order to

replace lid. Rotate the handle to the

carrying position to latch the lid.

NOTE: Remember to secure the lid

and test to make sure it is secure

before picking up the tank.

6. Place tank into machine base, seating

firmly in place. Rotate tank handle back

into latched position. Bring machine

handle back into upright position.

Fill the SmartMix/formula tank

1. Lift the formula tank up and out of the

machine base.

2. Fill the formula tank by first unscrewing

the cap and insert. Always use genuine

BISSELL formulas to maximize cleaning

and for the safety of your machine.

Fill with water to the water fill line, then

fill with formula to the formula fill line

and replace the cap and insert. Place

formula tank into the slot in the back of

the machine for a snug fit.

NOTE: If bottle leaks, check

for proper positioning of red

gasket and straw insert.

WARNING:

To Reduce the Risk of Fire and

Electric Shock due to internal

component damage, use only

BISSELL cleaning fluids intended

for use with the deep cleaner.

Red

Gasket

www.bissell.com 800.237.7691

Operations

Choose the SmartMix setting

Simply choose one of the 3 settings

 •HighTraffic

 •Normal

 •WaterRinse

and the PowerSteamer will adjust the right

amount of cleaning solution to mix with the

heated water to fit your cleaning need.

NOTE: When your cleaning job

is finished, the formula can be

stored ready to use in your

machine for the next time!

Set ReadyTools dial

Set ready tools dial to the floor cleaning setting.

Power switch

1. Plug into a proper outlet and turn the

power switch to the ON ( I ) position. The

switch is found on the back of the handle.

Cleaning strokes

1. While pressing the trigger, make one slow

forward wet pass and another one back.

Let the formula and DirtLifter PowerBrush

do the work for you. Caution: Do not

overwet. Take care not to run over loose

objects or edges of area rugs. Stalling

brush may result in premature belt failure.

2. Release the trigger and make one slow for-

ward and backward pass over the same

area to remove any residual dirty water,

and aid in drying. Repeat cleaning passes

until solution being pulled up appears

clean. Continue passes without pressing

the trigger until you can’t see any more

water being pulled up.

NOTE: Both the SmartMix tank

and the clean water tank must

have liquid in them in order for the

machine to spray. If one tank is

empty the machine will not apply

cleaning solution or water.

3. After cleaning, you may want to turn

the SmartMix dial to rinse to give your

carpeting a final water only rinse.

This will ensure thorough removal of

embedded dirt loosened by the deep

cleaning formula.

WARNING:

To reduce the risk of fire and

electric shock due to internal

component damage, use only

BISSELL cleaning fluids intended

for use with the deep cleaner.

When filling bottle or

storing unit, set

dial to:

WATER

RINSE



HIGH 

TRAFFIC

WATER RINSE/

CARPET

PROTECTOR 



NORMAL



TOOLS

PRETREAT

FLOOR

CLEANING



TOOLS

PRETREAT

FLOOR

CLEANING

ReadyTools Dial

SmartMix Dial

Tip:

Deep cleaning stairs and high

traffic areas on a regular basis

can prolong carpet life.

www.bissell.com 800.237.7691

Operations

Empty The 2-in-1 water tank

1. Remove the 2-in-1 water tank from the

base using the tank carry handle. Carry

the tank like a bucket to a utility sink or

outside where you will dispose of the

collection water. Remove the top of the

tank by rotating the handle forward to

unlatch lid and lifting lid off tank.

2. Empty collection water from bottom

of tank.

NOTE: You may notice hair &

debris deposits on the carpet or

in the tank that were loosened by

the cleaning action (especially with

newer carpets that have never

been deep cleaned before). This

debris should be picked up and

thrown away.

3. After each use, remove and rinse the lint

screen located on the tank lid.

4. Refill the tank in tank by referencing

“Fill the 2-in-1 water tank” on page 9.

Remember to secure the top of the tank

by rotating the handle and test to make

sure it is secure before picking up.

5. Return 2-in-1 water tank to the machine.

Rinse (optional)

Rinsing is an optional step that can be done

during the cleaning process by switching to the

water rinse setting, or it can be done after the

carpeted area has been cleaned.

1. Simply choose the water rinse setting

on the SmartMix dial, and follow the

same path as you did for cleaning,

taking care to do a forward (wet)

stroke by depressing the trigger, a

backward (wet) stroke, and a forward

and backward (dry) stroke, releasing

the trigger. Continue this until the water

you see coming up the nozzle is clear,

taking care not to over-wet the carpet.

WARNING:

To reduce the risk of fire and

electric shock due to internal

component damage, use only

BISSELL cleaning fluids intended

for use with the deep cleaner.

8a.

When filling bottle or

storing unit, set

dial to:

WATER

RINSE

1. 2.

www.bissell.com 800.237.7691

Operations

Stain removal

Do not delay! Attending to an

accident soon after it occurs ensures

the chances for full removal. Leaving

it for an extended period of time

may cause it to set and become

permanent.

1. Blot up liquids with an absorbent cloth

or paper towels. White materials are

recommended because certain dyes

may bleed and make the stain worse.

2. Gently scrape up any semi-solids with a

spoon or spatula. Do not use a knife or

other utensil with sharp edges because it

could damage the carpet or upholstery.

3. If the area has dried, remove the

remaining semi-solids and residue with

a sweeper or vacuum.

4. Be sure to test any spot removal formulas

in an inconspicuous area first. This is

important as some dyes and materials

could be damaged or discolored by

cleaning solvents. If such a change

should occur, try a different solution or

call a professional.

5. If cleaning on Berber carpeting, gently

run your machine over a hidden area.

If no fuzzing occurs, continue cleaning

in soiled area.

6. Using the BISSELL Tough Stain PreCleaner,

spray evenly over soiled area. Do not

overwet. Wait 3-5 minutes. Gently work

the solution by blotting area with a clean,

damp, color safe cloth.

7. Clean using either the floor cleaning,

or tools or pretreat setting on the ready

tools dial.

WARNING:

To reduce the risk of fire and

electric shock due to internal

component damage, use only

BISSELL cleaning fluids intended

for use with the deep cleaner.

Non-BISSELL cleaning solutions

may harm the machine and

void the warranty.

www.bissell.com 800.237.7691

Operations

Hard Floor

Cleaning Tool

Bottom Front Edge

of Floor Nozzle

Snap Together

Hard floor cleaning

Your PowerSteamer model may have come

with a hard floor attachment and Hard Floor

Solutions Formula. If not, these products

are available for purchase by contacting

the BISSELL Consumer Care department by

phone or on the website. The hard floor

tool provides effective cleaning for linoleum,

vinyl, and tile floors. Caution: Do not use on

unsealed hardwood floors.

1. Vacuum or Sweep thoroughly to pick up

any loose debris and pet hair.

2. Move any furniture, if needed.

3. Empty any carpet cleaning formula back

into the BISSELL bottle if stored in the formu-

la tank. Fill formula tank with water to the

water fill line, then with BISSELL 2X Hard

Floor Solutions to the formula fill line (avail-

able at many retailers, or contact BISSELL

Consumer Care).

4. Fill the 2-in-1 water tank with hot tap

water and set aside.

5. Attach the hard floor tool onto the floor

nozzle with the long tab to the right

side of the floor nozzle. First attach left

side (short tab) catching tab over nozzle

edge. Gently bend long tab (right side)

outward to easily snap over edge of

clear nozzle on left.

6. Set the ready tools dial to floor cleaning.

7. Set the SmartMix dial to normal clean.

8. Plug into an outlet and turn the power

switch ON ( I ).

9. Slowly move the machine forward and

back over bare floor surface one time

while pressing trigger.

Caution: Do not overwet.

10. Repeat the motion without pressing the

trigger. This allows the hard floor tool to

squeegee and suction up the dirty water.

11. Allow approximately 30 minutes for

floors to dry.

12. Remove hard floor tool and rinse and

dry before storing.

13. If any formula remains in the formula

tank, pour it back into the formula bottle

for use the next time.

14. Rinse out the formula tank.

WARNING:

To reduce the risk of electric shock

when cleaning a hard floor, the

BISSELL Hard Floor Tool (203-

5640) must be used and it must

only be used with BISSELL 2X

Hard Floor Solutions cleaning fluid

intended for use in this appliance

www.bissell.com 800.237.7691

Maintenance and Care

Machine storage

Once your cleaning is complete, make sure

the 2-in-1 water tank is emptied and rinsed out.

Put the unit away in a closet or basement for

the next use. The SmartMix tank can remain

filled and ready to go (store with machine set

to water only setting).

Note: Store cleaner in a protected,

dry area. Since this product uses

water, it must not be stored where

there is a danger of freezing. Freezing

will damage internal components and

void the warranty.

Machine Care

For best results, a few simple steps can assure

your machine is well maintained after your

cleaning is complete.

1. Turn power switch OFF ( O ). Unplug

the machine and wrap the power cord.

2. After emptying the 2-in-1 water tank, rinse

it out at a faucet with running hot tap

water, taking care to clean underneath

the heavy duty bladder, and all around it.

Clean out lint trap.

3. Replace the 2-in-1 water tank on

the machine.

4. Clean out the flow indicator filter each

time it is used to ensure best cleaning

performance. Unscrew the flow indica-

tor cap, lift out the red rotor and white

filter. Rinse all three parts with water.

Replace the filter and rotor. Replace the

flow indicator cap. Turn until snug, do

not over-tighten.

5. Any loose hair or debris can be pulled

from the brush roll if desired and thrown

away.

6. Wipe the machine’s exterior with a

soft cloth.

7. After carpet is dry, vacuum again to

remove hair and fuzz.

WARNING:

To reduce the risk of fire,

electric shock or injury, unplug

from the outlet before servicing.



TOOLS

PRETREAT

FLOOR

CLEANING

OFF

Flow Indicator

OFF

www.bissell.com 800.237.7691

Maintenance and Care

Your PowerSteamer machine comes equipped

with a hose and at least one attachment for

cleaning stairs, upholstery, and more.

1. Important! If using to clean Upholstery,

check Upholstery Tags.

a. Check manufacturer’s tag before clean-

ing. “W” or “WS” on the tag means you

can use your PowerSteamer. If the tag is

coded with an “X” or an “S” (with a diago-

nal stripe through it), or says “Dry Clean

Only”, do not proceed with any deep

cleaning machine. Do not use on velvet or

silk. If manufacturer’s tag is missing or not

coded, check with your furniture dealer.

b. Check for colorfastness in an

inconspicuous place.

c. If possible, check upholstery stuffing.

Colored stuffing may bleed through fabric

when wet.

Plan activities to allow upholstery time to dry.

e. Vacuum thoroughly to pick up loose

debris and pet hair. Use a vacuum with

a brush attachment and a crevice tool to

clean in fabric folds.

2. Follow the instructions on page 9 for filling

the 2-in-1 water tank and the formula tank.

3. Set ready tools dial to the tools or pretreat

setting. This will allow spray and divert the

suction to the hose.

4. Set SmartMix dial to normal.

Attach the cleaning tool to the end of the hose.

6. Plug in and turn on the power switch.

7. Clean by pressing the trigger to spray solu-

tion onto the area to be cleaned. Slowly

move the tool back and forth over the soiled

surface. Release the trigger to suction soiled

water. Continue to clean in the area, work-

ing in small sections, until no more dirt can

be removed. Rinse (optional) and suction as

needed. Caution: Do no overwet.

8. When cleaning is complete, remove and

rinse tools in clean, running water.

9. Coil hose around the tool caddy.

10. Empty 2-in-1 water tank and rinse out,

following the instructions on page 11.

11. Return ready tools dial to floor cleaning.

WARNING:

To reduce the risk of injury, be

extra careful when cleaning

stairs. Make sure machine is

secure and level.

Adsdfdd ghg bvh

cvbbj jkn hnbj jkvh

gcghhjj jhffhl kllgh

Manufacturer’s tag

Tip:

Deep cleaning carpeting

and upholstery with

BISSELL Multi-Allergen

Removal Formula™ with

Scotchgard™ protector

regularly can reduce dust

and allergens in your home.

www.bissell.com 800.237.7691www.bissell.com 800.237.7691

Reduced spray or no spray.

Possible Cause Remedies

1. Bladder may be empty. 1. Refill bladder with hot tap water.

2. SmartMix tank may be empty. 2. Follow the instructions under "Fill the SmartMix/

formula tank" on page 9 Formula for cleaning.

3. The filter may be clogged. 3. Clean out flow indicator filter, page 14, step 4.

4. Tanks may not be seated properly. 4. Turn power OFF (O); remove & reseat tanks.

5. Pump may have lost prime. 5. Turn power OFF (O); after 1

minute turn ON and press Trigger.

6. The pump belt may be broken. 6. Turn the machine OFF (O) and unplug from the outlet. To

check if a pump belt has broken, you will need a flat head

screwdriver. Insert the blade end into the lower slot of the

belt access door to release the lower snap. If necessary,

insert the blade end into the upper slot to release the upper

snap. Examine the belt for breakage. You should be able

to see the pump belt looped around the motor shaft. If it

is broken or missing, please refer to Replacement Parts on

page 18 before calling Consumer Care. Complete installation

instructions will accompany the replacement belt.

DirtLifter PowerBrush does not turn.

Possible Cause Remedies

1. The Brush Belt or Pump Belt is off or broken. 1. Turn the machine OFF (O) and unplug from the outlet. To

check if the brush belt or pump belt has broken, you will

need a flat head screwdriver. Insert the blade end into

the lower slot of the belt access door to release the lower

snap. If necessary, insert the blade end into the upper slot

to release the upper snap. Examine the belt for breakage.

If broken, please refer to Replacement Parts on page 18

before calling Consumer Care. Complete installation instruc-

tions will accompany the replacement belt.

TOOLS

PRETREAT

FLOOR

CLEANING

Insert Screwdriver

Blade Here

Lift Here

WARNING:

To reduce the risk of fire, electric

shock or injury unplug from

outlet before servicing.

Troubleshooting

www.bissell.com 800.237.7691

Cleaner not picking up solution.

Possible Cause Remedies

1. Ready tools dial may be on the wrong setting for the cleaning job. 1. Set ready tools dial to either or tools or pretreat

floor cleaning.

2. Nozzle window may not be properly attached. 2. Press down firmly on the black oval gasket at the top

window to make sure the two tabs on the back of the

nozzle window are snapped into the corresponding holes

in the main housing.

3. 2-in-1 water tank lid is not properly installed. 3. Re-install lid; refer to page 9.

4. 2-in-1 water tank is not properly seated. 4. 2-in-1 water tank must be firmly seated to function;

remove and reseat 2-in-1 water tank.

5. Poor tool position. (Hand held attachments only). 5. Adjust angle; apply more downward pressure.

6. 2-in-1 water tank has picked up maximum dirty water. 6. Empty 2-in-1 water tank, refer to page 11.

Other maintenance or service not included in the manual should be

performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of

service. Contact us directly at 1-800-237-7691.

Troubleshooting

www.bissell.com 800.237.7691

Replacement parts - BISSELL PowerSteamer

Accessories - BISSELL PowerSteamer

Below a list of common replacement parts. While not all of these parts may have

come with your specific machine, all are available to you for purchase, if desired.

Item Part No. Part Name

1 015-9043 Tank Assembly Complete (Includes lid assembly)

2 015-4439 Tank Lid Assembly

3 015-9041 Tank Bottom

4 210-1785 SmartMix® Tank (Includes Cap)

5 210-1795 SmartMix® Cap Assembly

6 555-6503 Flow Indicator Cap Assembly

7 214-9871 Floor Nozzle Window and Gasket

8 210-4052 Window Gasket

9 215-0628 Replacement Pump Belt (With Instructions)

10 015-0621 Replacement Belt Brush (With Instructions)

11 213-3501 Lint Screen

Item Part No. Part Name

1 203-6653 4" Upholstery Tool

2 203-6652 Spraying Crevice Tool

3 203-6652 TurboBrush® Tool

4 203-5640 Hard Floor Tool

5 203-6651 3" Tough Stain Tool

6 62E5-2 BISSELL 2X Deep Clean & Protect Formula 60 oz

7 99K5-2 BISSELL 2X Professional Deep Cleaning Formula 60 oz

8 84U4-2 BISSELL 2X Professional Deep Cleaning Formula 60 oz

9 56L9 BISSELL 2X Hard Floor Solutions™ 16 oz

10 4001 Tough Stain PreCleaner™ 22 oz

1 2 3 4 5

1 2

3 4

OFF

8 10 11

6 7 8 9

www.bissell.com 800.237.7691

Warranty - BISSELL PowerSteamer

This warranty gives you specific legal rights, and you may also have other rights which may

vary from state to state. If you need additional instruction regarding this warranty or have ques-

tions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone,

or regular mail as described below.

Limited One Year Warranty

Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the prod-

uct BISSELL will repair or replace (with new or remanufactured components or products), at

BISSELL’s option, free of charge from the date of purchase by the original purchaser, for one

year any defective or malfunctioning part.

See information below on "If your BISSELL product should require service".

This warranty applies to product used for personal, and not commercial or rental service. This

warranty does not apply to fans or routine maintenance components such as filters, belts, or

brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any

other use not in accordance with the user's guide is not covered.

If your BISSELL product should require service:

Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area.

If you need information about repairs or replacement parts, or if you have questions about

your warranty, contact BISSELL Consumer Care.

Website or E-mail:

www.bissell.com

Or Call:

BISSELL Consumer Care

1-800-237-7691

Monday - Friday 8 am - 10 pm ET

Saturday 9 am - 8 pm ET

Or Write:

BISSELL Homecare, Inc.

PO Box 3606

Grand Rapids, MI 49501

ATTN: Consumer Care

BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE

ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE

PURCHASE PRICE OF THE PRODUCT.

Some states do not allow the exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may not apply to you.

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR

WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty last so the above limitation

may not apply to you.

Registering is quick, easy and offers you benefits over the lifetime of your product.

You’ll receive:

BISSELL Rewards Points

Automatically earn points for discounts and free shipping on future purchases.

Faster Service

Supplying your information now saves you time should you need to contact us with

questions regarding your product.

Product Support Reminders and Alerts

We’ll contact you with any important product maintenance reminders and alerts.

Special Promotions

Optional: Register your email to receive notice of offers, contests, cleaning tips and more!

Visit www.bissell.com/registration now!

Don't forget to register your product!

Grand Rapids, Michigan

Part Number 120-4504

Rev 4/12

Visit our website at:

www.bissell.com

Scotchgard is a trademark of 3M

For information about repairs or replacement parts, or questions about your warranty, call:

BISSELL Consumer Care

1-800-237-7691

Monday - Friday 8 am — 10 pm ET

Saturday 9 am — 8 pm ET

Or write:

BISSELL Homecare, Inc.

PO Box 3606

Grand Rapids MI 49501

ATTN: Consumer Care

Or visit the BISSELL website - www.bissell.com

When contacting BISSELL, have model number of cleaner available.

Please record your Model Number: ___________________

Please record your Purchase Date: ___________________

NOTE: Please keep your original sales receipt. It

provides proof of purchase date in the event of a

warranty claim. See Warranty on page 19 for details.

BISSELL Consumer Care

www.bissell.com 800.237.7691

Bissell PowerSteamer 1697 Series Instrukcja obsługi

Marka: Bissell

Model: PowerSteamer 1697 Series

Kategoria: Odkurzacze parowe

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

PowerSteamer 8804 Series

ściągnij PDF

raport

w innych językach

English: Bissell PowerSteamer 1697 Series User manual

Bissell PowerSteamer 1697 Series Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Bissell PowerSteamer 1697 Series Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty