Bartscher 300147 Instrukcja obsługi

Marka: Bartscher

Model: 300147

Typ: Instrukcja obsługi

ASP700

300147

Bartscher GmbH

Franz-Kleine-Str. 28

D-33154 Salzkotten

Germany

Phone: +49 5258 971-0

Fax: +49 5258 971-120

Service hotline: +49 5258 971-197

www.bartscher.com

Version: 1.0

Date of preparation: 2019-07-03

Original instruction manual

300147 3 / 7

Technical Specifications

Name:

Dishwasher basket trolley ASP700

Item No.:

300147

Material:

Stainless steel

Number of guide pairs:

Guide dimensions (W x D) in mm:

505 x 545

Distance between guide pairs in mm:

200

Load-bearing capacity per guide pair, max.

in kg.:

Number of swivel casters:

Locking swivel casters:

Diameter of casters in mm:

100

Number of caster dampers:

Material of caster dampers:

plastic

Total load-bearing capacity, max. in kg:

100

Dimensions (W x D x H) in mm:

630 x 615 x 1750

Weight in kg:

15,8

We reserve the right to implement technical modifications!

Version / Characteristics

• Area of application: clearing/storage

• Version: guides

• Designed for: dishwasher baskets 500 x 500 mm

• May be loaded from both sides

• Square tubing frame, 25 x 25 mm section

• One basket lock per front and rear of the trolley

• Delivery state: building kit, plug system (simple assembly)

4 / 7 300147

Scope of Delivery / Part Name

• Unpack the dishwasher basket trolley and remove the packing material pursuant

to environmental regulations.

• Check completeness of delivery according to the list below:

Element

Number

Name

Lateral sections with 7 preinstalled

guides and

1 basket lock per each

Crossbars

Locking swivel casters

Swivel casters without locking

Swivel caster dampers

Allen wrench

Square washers

Bolts

300147 5 / 7

Intended Use

The dishwasher basket trolley is intended for storing suitable dishwasher baskets,

with dimensions of 500 x 500, in commercial kitchens.

Assembly

Fig. 1

Fig. 2

1. Place one lateral section on the ground.

2. Take 6 crossbars (top, middle and bottom) and mount them on the lateral

section of the dishwasher basket trolley (Fig 1).

3. Each time, with top and bottom crossbar, use square washer between a

crossbar and the lateral section and between lateral section and a bolt.

4. Then, use Allen wrench and tighten the bolt.

5. Each time, with middle crossbars, use only one square washer between the

lateral section and a bolt.

6. Use Allen wrench and tighten the bolt.

7. Mount 6 crossbars on the second lateral section, using washers and blots, as

described above (Fig. 1).

6 / 7 300147

8. Place the dishwasher basket

trolley on its side.

9. Mount 4 swivel caster dampers

onto square tubing of lateral

sections.

10. Finally, screw swivel casters into

square tubing of lateral sections.

(Fig. 3)

Fig. 3

Positioning

1. Set the dishwasher basket trolley on swivel casters and check its stability.

2. Thedishwasher basket trolley may be levelled through screwing in and out

swivel casters.

3. After setting the dishwasher basket trolley in a designated place, lock 2 swivel

casters with lockings to prevent accidental relocation or overturn of the trolley.

Loading of the dishwasher basket trolley / Fixing of the basket locks

1. Place required number of suitable

dishwasher baskets in guides.

2. Secure dishwasher baskets at front and

rear with basket locks, lifting them up and

closing before dishwasher baskets (Fig. 4).

Basket locks stop dishwasher baskets from

slipping, tilting or falling out.

3. Zabezpieczyć kosz e do zmyware k z przodu i z t yłu za pomocą blokad kosza, p odciągając je do góry i zamykają c przed kosz ami do z mywarek (Rys. 4). Blokady kosza z apobiegają ześlizg iwaniu si ę, przechylaniu l ub wypadani u z koszy do z mywarek.

Fig. 4