Digi XBee / XBee-PRO S2C DigiMesh 2.4 Module instrukcja

Digi
Marka
Digi
Model
XBee / XBee-PRO S2C DigiMesh 2.4 Module
Kategoria
Anteny sieciowe
Typ
instrukcja

Ten podręcznik jest również odpowiedni dla

1
Digi XBee Application Note
Migration from XBee/XBee-PRO ZB (S2/S2B) to XBee/XBee-PRO ZB (S2C)
This guide will assist you with migrating from the XBee/XBee-PRO ZB (S2/S2B) to the XBee/XBee-PRO ZB
(S2C) Through-Hole modules. Even though these XBee modules are similar in function, there are some
differences that you need to keep in mind. The S2/S2B used the Ember EM250 microprocessor to
control the ZigBee Protocol. The XBee/XBee-PRO ZB (S2C) module uses the Ember EM357; this new
microprocessor contains much more memory allowing for more flexibility. The footprint of the
XBee/XBee-PRO ZB (S2C) Though-Hole is identical to the XBee/XBee-PRO ZB (S2/S2B) and is fully over-
the-air (OTA) compatible. A key change with the XBee/XBee-PRO ZB (S2C) is that six firmware images
(Coordinator AT, Coordinator API, Router AT, Router API, End Device AT, and End Device API) are
combined into a single firmware load.
Migration Considerations
XBee ZigBee (S2) to XBee ZigBee (S2C) Through-Hole Considerations
Considerations
XBee ZB (S2)
XBee ZB (S2C) TH
Comments
Indoor/Urban Range
up to 133 ft. (40 m)
Up to 200 ft. (60 m)
Improved
Outdoor RF line-of-sight
Range
up to 400 ft. (120 m)
Up to 4000 ft. (1200 m)
Improved
Transmit Power Output
2mW (+3dBm), Boost
mode
1.25mW (+1dBm),
Normal mode
6.3mW (+8dBm), Boost
mode
3.1mW (+5dBm), Normal
mode
Channel 26 max power is
+3dBm
Improved
Note: An International variant
of the XBee ZB (S2C) TH is not
available; the +8dBm non-PRO
variant should be used.
Receiver Sensitivity
-96 dBm, Boost mode
-95 dBm, Normal mode
-102 dBm, Boost mode
-100 dBm, Normal mode
Improved
Operating Current
(Transmit)
40mA (@ 3.3 V, Boost
mode)
35mA (@ 3.3 V, Normal
mode)
45mA (+8 dBm, Boost
mode)
33mA (+5 dBm, Normal
mode)
Slightly higher on boost mode
to due to increased output
power.
Improved on normal mode.
Operating Current
(Receive)
40mA (@ 3.3 V, Boost
mode)
38mA (@ 3.3 V, Normal
mode)
31mA (Boost mode)
28mA (Normal mode)
Improved
SPI
Not Supported
5 Mbps maximum (burst)
Added SPI interface
FCC ID
OUR-XBEE2
MCQ-S2CTH
Customer will need to change
the label on their end product
to show the appropriate FCC ID
for the S2C.
Industry Canada (IC) ID
4214A-XBEE2
1846A-S2CTH
Customer will need to change
the label on their end product
to show the appropriate IC ID
for the S2C.
2
XBee-PRO ZigBee (S2) to XBee-PRO ZigBee (S2C) Through-Hole Considerations
Considerations
XBee-PRO ZB (S2)
XBee-PRO ZB (S2C) TH
Comments
Transmit Power Output
50mW (+17 dBm)
63mW (+18 dBm)
Improved
Receiver Sensitivity
-102 dBm
-101 dBm
Comparable
Supply Voltage
3.0 - 3.4 V
2.7 - 3.6 V
Larger voltage range
Operating Current
(Transmit)
295mA (@3.3 V)
120mA @ +3.3 V, +18 dBm
Improved
Operating Current
(Receive)
45 mA (@3.3 V)
31 mA
Improved
Power-down Current
3.5A @ 25
o
C
< 1A @ 25
o
C
Improved
Channels
11 to 24
11 to 25
One additional channel
SPI
Not Supported
5 Mbps maximum (burst)
Added SPI interface
FCC ID
MCQ-XBEEPRO2
MCQ-PS2CTH
Customer will need to
change the label on their
end product to show the
appropriate FCC ID for the
S2C.
Industry Canada (IC) ID
1846A-XBEEPRO2
1846A-PS2CTH
Customer will need to
change the label on their
end product to show the
appropriate IC ID for the
S2C.
XBee-PRO ZigBee (S2B) to XBee-PRO ZigBee (S2C) Through-Hole Considerations
Considerations
XBee-PRO ZB (S2B)
XBee-PRO ZB (S2C) TH
Comments
Receiver Sensitivity
-102 dBm
-101 dBm
Comparable
Operating Current
(Transmit)
205mA, up to 220 mA
with programmable
variant (@3.3 V)
120mA @ +3.3 V, +18 dBm
Improved
Operating Current
(Receive)
47 mA, up to 62 mA with
programmable
variant (@3.3 V)
31mA
Improved
Power-down Current
3.5A @ 25
o
C
< 1A @ 25
o
C
Improved
SPI
Not Supported
5 Mbps maximum (burst)
Added SPI interface
FCC ID
MCQ-PROS2B
MCQ-PS2CTH
Customer will need to
change the label on their
end product to show the
appropriate FCC ID for the
S2C.
Industry Canada (IC) ID
1846A-PROS2B
1846A-PS2CTH
Customer will need to
change the label on their
end product to show the
appropriate IC ID for the
S2C.
3
Pin Compatibility
The XBee/XBee-PRO ZB (S2C) introduces the SPI serial interface to Digi’s through-hole ZigBee radio. The
table below shows which pins are used for the SPI interface. Please refer to the XBee/XBee-PRO ZB (S2C)
product manual for more information.
Pin #
XBee/XBee-PRO ZB (S2C) TH
1
VCC
2
DOUT / DIO13
3
DIN / CONFIG / DIO14
4
DIO12 / SPI_MISO
5
RESET
6
RSSI PWM / PWMO DIO10
7
PWM1 / DIO11
8
[RESERVED]
9
DTR / SLEEP_RQ / DIO8
10
GND
11
SPI_MOSI / DIO4
12
CTS / DIO7
13
ON_SLEEP / DIO9
14
VREF
15
ASSOCIATE / DIO5
16
RTS / DIO6
17
AD3 / DIO3 / SPI_SSEL
18
AD2 / DIO2 / SPI_CLK
19
AD1 / DIO1 / SPI_ATTN
20
AD0 / DIO0 / COMMISIONING BUTTON
4
Part Number Migration Guide
The following table shows which XBee/XBee-PRO ZB (S2C) module to migrate to depending on which
XBee/XBee-PRO ZB (S2/S2B) module you are currently using.
Legacy Part
Number
Description
Migrate To
Description
XB24-BPIT-***
XBee ZB (ZNet 2.5) low power
ZigBee module w/ PCB antenna
XB24CZ7PIT-004
XBee ZB (S2C) low power ZigBee
module w/ PCB antenna
XB24-BSIT-***
XBee ZB (ZNet 2.5) low power
ZigBee module w/ RPSMA
connector
XB24CZ7SIT-004
XBee ZB (S2C) low power ZigBee
module w/ RPSMA connector
XB24-BUIT-***
XBee ZB (ZNet 2.5) low power
ZigBee module w/ U.FL
connector
XB24CZ7UIT-004
XBee ZB (S2C) low power ZigBee
module w/ U.FL connector
XB24-BWIT-***
XBee ZB (ZNet 2.5) low power
ZigBee module w/ integrated
wire antenna
XB24CZ7WIT-004
XBee ZB (S2C) low power ZigBee
module w/ integrated wire
antenna
XBP24-BPIT-***
XBee-PRO ZB (ZNet 2.5) module
w/ PCB antenna
XBP24CZ7PIT-004
XBee-PRO ZB (S2C) module w/ PCB
antenna
XBP24-BSIT-***
XBee-PRO ZB (ZNet 2.5) module
with RPSMA connector
XBP24CZ7SIT-004
XBee-PRO ZB (S2C) module with
RPSMA connector
XBP24-BUIT-***
XBee-PRO ZB (ZNet 2.5) module
w/ U.FL antenna connector
XBP24CZ7UIT-004
XBee-PRO ZB (S2C) module w/
U.FL antenna connector
XBP24-BWIT-***
XBee-PRO ZB (ZNet 2.5) module
w/ wire antenna
XBP24CZ7WIT-004
XBee-PRO ZB (S2C) module w/
wire antenna
XBP24-BPIT-***J
XBee-PRO ZB (ZNet 2.5) module
w/ PCB antenna (International)
XB24CZ7PIT-004
XBee ZB (S2C) low power ZigBee
module w/ PCB antenna
XBP24-BSIT-***J
XBee-PRO ZB (ZNet 2.5) module
with RPSMA connector
(International)
XB24CZ7SIT-004
XBee ZB (S2C) low power ZigBee
module w/ RPSMA connector
XBP24-BUIT-***J
XBee-PRO ZB (ZNet 2.5) module
w/ U.FL antenna connector
(International)
XB24CZ7UIT-004
XBee ZB (S2C) low power ZigBee
module w/ U.FL connector
XBP24-BWIT-***J
XBee-PRO ZB (ZNet 2.5) module
w/ wire antenna (International)
XB24CZ7WIT-004
XBee ZB (S2C) low power ZigBee
module w/ integrated wire
antenna
XB24-Z7PIT-***
XBee ZB (S2) low power ZigBee
module w/ PCB antenna
XB24CZ7PIT-004
XBee ZB (S2C) low power ZigBee
module w/ PCB antenna
XB24-Z7WIT-***
XBee ZB (S2) low power ZigBee
module w/ integrated wire
antenna
XB24CZ7WIT-004
XBee ZB (S2C) low power ZigBee
module w/ integrated wire
antenna
XB24-Z7UIT-***
XBee ZB (S2) low power ZigBee
module w/ U.FL connector
XB24CZ7UIT-004
XBee ZB (S2C) low power ZigBee
module w/ U.FL connector
XB24-Z7SIT-***
XBee ZB (S2) low power ZigBee
module w/ RPSMA connector
XB24CZ7SIT-004
XBee ZB (S2C) low power ZigBee
module w/ RPSMA connector
XBP24-Z7PIT-***
XBee-PRO ZB (S2) module w/
PCB antenna
XBP24CZ7PIT-004
XBee-PRO ZB (S2C) module w/ PCB
antenna
XBP24-Z7WIT-***
XBee-PRO ZB (S2) module w/
wire antenna
XBP24CZ7WIT-004
XBee-PRO ZB (S2C) module w/
wire antenna
5
XBP24-Z7UIT-***
XBee-PRO ZB (S2) module w/
U.FL antenna connector
XBP24CZ7UIT-004
XBee-PRO ZB (S2C) module w/
U.FL antenna connector
XBP24-Z7SIT-***
XBee-PRO ZB (S2) module with
RPSMA connector
XBP24CZ7SIT-004
XBee-PRO ZB (S2C) module with
RPSMA connector
XBP24-Z7PIT-***J
XBee-PRO ZB (S2) module w/
PCB antenna (International)
XB24CZ7PIT-004
XBee ZB (S2C) low power ZigBee
module w/ PCB antenna
XBP24-Z7WIT-***J
XBee-PRO ZB (S2) module w/
wire antenna (International)
XB24CZ7WIT-004
XBee ZB (S2C) low power ZigBee
module w/ integrated wire
antenna
XBP24-Z7UIT-***J
XBee-PRO ZB (S2) module w/
U.FL antenna connector
(International)
XB24CZ7UIT-004
XBee ZB (S2C) low power ZigBee
module w/ U.FL connector
XBP24-Z7SIT-***J
XBee-PRO ZB (S2) module with
RPSMA connector
(International)
XB24CZ7SIT-004
XBee ZB (S2C) low power ZigBee
module w/ RPSMA connector
XBP24BZ7PIT-***
XBee-PRO ZB (S2B) module w/
PCB antenna
XBP24CZ7PIT-004
XBee-PRO ZB (S2C) module w/ PCB
antenna
XBP24BZ7SIT-***
XBee-PRO ZB (S2B) module with
RPSMA connector
XBP24CZ7SIT-004
XBee-PRO ZB (S2C) module with
RPSMA connector
XBP24BZ7UIT-***
XBee-PRO ZB (S2B) module w/
U.FL antenna connector
XBP24CZ7UIT-004
XBee-PRO ZB (S2C) module w/
U.FL antenna connector
XBP24BZ7WIT-***
XBee-PRO ZB (S2B) module w/
wire antenna
XBP24CZ7WIT-004
XBee-PRO ZB (S2C) module w/
wire antenna
XBP24BZ7PIT-***J
XBee-PRO ZB (S2B) module w/
PCB antenna
(International)
XB24CZ7PIT-004
XBee ZB (S2C) low power ZigBee
module w/ PCB antenna
XBP24BZ7SIT-***J
XBee-PRO ZB (S2B) module with
RPSMA connector
(International)
XB24CZ7SIT-004
XBee ZB (S2C) low power ZigBee
module w/ RPSMA connector
XBP24BZ7UIT-***J
XBee-PRO ZB (S2B) module w/
U.FL antenna connector
(International)
XB24CZ7UIT-004
XBee ZB (S2C) low power ZigBee
module w/ U.FL connector
XBP24BZ7WIT-***J
XBee-PRO ZB (S2B) module w/
wire antenna (International)
XB24CZ7WIT-004
XBee ZB (S2C) low power ZigBee
module w/ integrated wire
antenna
XBP24BZ7SITB***
Programmable XBee-PRO ZB
(S2B) extended range ZigBee
module w/ RPSMA connector
XBP24CZ7SITB003
Programmable XBee-PRO ZB (S2C)
extended range ZigBee module w/
RPSMA connector
XBP24BZ7WITB***
Programmable XBee-PRO ZB
(S2B) extended range ZigBee
module w/ integrated wire
antenna
XBP24CZ7WITB003
Programmable XBee-PRO ZB (S2C)
extended range ZigBee module w/
integrated wire antenna
XBP24BZ7PITB***
Programmable XBee-PRO ZB
(S2B) extended range ZigBee
module w/ PCB antenna
XBP24CZ7PITB003
Programmable XBee-PRO ZB (S2C)
extended range ZigBee module w/
PCB antenna
XBP24BZ7UITB***
Programmable XBee-PRO ZB
(S2B) extended range ZigBee
module w/ U.FL connector
XBP24CZ7UITB003
Programmable XBee-PRO ZB (S2C)
extended range ZigBee module w/
U.FL connector
XBP24BZ7SITB***J
Programmable XBee-PRO ZB
(S2B) extended range ZigBee
module w/ RPSMA connector
(International)
XB24CZ7SITB003
Programmable XBee ZB (S2C) low
power ZigBee module w/ RPSMA
connector
6
XBP24BZ7WITB***J
Programmable XBee-PRO ZB
(S2B) extended range ZigBee
module w/ integrated wire
antenna (International)
XB24CZ7WITB003
Programmable XBee ZB (S2C) low
power ZigBee module w/
integrated wire antenna
XBP24BZ7PITB***J
Programmable XBee-PRO ZB
(S2B) extended range ZigBee
module w/ PCB antenna
(International)
XB24CZ7PITB003
Programmable XBee ZB (S2C) low
power ZigBee module w/ PCB
antenna
XBP24BZ7UITB***J
Programmable XBee-PRO ZB
(S2B) extended range ZigBee
module w/ U.FL connector
(International)
XB24CZ7UITB003
Programmable XBee ZB (S2C) low
power ZigBee module w/ U.FL
connector
Configuration
The XBee/XBee-PRO ZB (S2/S2B) modules had six different firmware images (Coordinator AT,
Coordinator API, Router AT, Router API, End Device AT, and End Device API). The XBee/XBee-PRO ZB
(S2C) modules combine these six function sets into a single firmware image. The table below shows you
which settings to enable on the XBee/XBee-PRO ZB (S2C) modules to match the function set you were
using on the XBee/XBee-PRO ZB (S2/S2B) modules.
XBee/XBee-PRO ZB (S2/S2B) Function Set
XBee/XBee-PRO ZB (S2C) Firmware Settings
ZigBee Router AT
Default Settings
ZigBee Router API
Set AP (API Enable) = API enabled [1]
ZigBee Coordinator AT
Set CE (Coordinator Enable) = Enabled [1]
ZigBee Coordinator API
Set CE (Coordinator Enable) = Enabled [1]
Set AP (API Enable) = API enabled [1]
ZigBee End Device AT
Set SM (Sleep Mode) = Cyclic Sleep [4]
ZigBee End Device API
Set SM (Sleep Mode) = Cyclic Sleep [4]
Set AP (API Enable) = API enabled [1]
7
What’s New
The XBee/XBee-PRO ZB (S2C) introduces some new features and commands such as:
An alternative serial port is available using SPI slave mode operation
Six firmware images (Coordinator AT, Coordinator API, Router AT, Router API, End Device AT,
and End Device API) are combined into a single firmware
o ATCE command (1-enables/0-disables) Coordinator mode
o ATSM command (0 is Router/Coordinator, nonzero is sleeping End Device)
o Note that Coordinator mode cannot be enabled is SM is nonzero and you can’t set a
nonzero SM if CE is nonzero
Fragmentation is now available in both API mode and transparent mode
P3 (DOUT), P4 (DIN), D8 (SleepRq), and D9 (On-Sleep) are now available for I/O sampling
Both pull-up and pull-down resistors can now be applied to pins configured for inputs
ATVL command added for long version information
ATDO command added for configuring device options
ATAS command added for Active Scan
Self-addressed Tx Status messages return a status code of 0x23
ATDO has HIGH_RAM_CONCENTRATOR and NO_ACK_IO_SAMPLING options added
Binding and Multicasting transmissions are supported
AT&X command added to clear binding and group tables
Added Tx options 0x04 (indirect addressing) and 0x08 (multicast addressing)
A 5 second break will reset the XBee. Then it will boot with default baud settings into command
mode.
BD range increased from 0-7 to 0-0x0A, and nonstandard baud rates are permitted, but not
guaranteed
NI, DN, ND string parameters support upper and lower case
TxOption 0x01 disables retries and route repair. RxOption 0x01 indicates the transmitter
disabled retries.
FR returns 0x00 modem status code instead of 0x01
DC10 - verbose joining mode option
Self-addressed fragmentable messages now return the self-addressed Tx Status code (0x23)
instead of simply success (0x00)
Three command characters ("+++") typed rapidly will shift the device from API mode to AT
command mode
ATCN will shift the device from AT command mode to API mode
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Digi XBee / XBee-PRO S2C DigiMesh 2.4 Module instrukcja

Digi
Marka
Digi
Model
XBee / XBee-PRO S2C DigiMesh 2.4 Module
Kategoria
Anteny sieciowe
Typ
instrukcja
Ten podręcznik jest również odpowiedni dla
ściągnij PDF
raport

Inne dokumenty