Signature Hardware 445732 Instrukcja instalacji

Typ
Instrukcja instalacji
1
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing fixtures. Signature Hardware
accepts no liability for any damage to the hook or for
personal injury during installation.
Read entire Edison Robe Hook Installation Instructions.
Observe all local building and safety codes.
Unpack and inspect the product for any shipping
damages. If you find damages, do not install. Contact
Customer Service at 1-866-855-2284. If you need
assistance or have questions while installing your robe
hook, contact Customer Service.
We recommend consulting a professional if you are
unfamiliar with installing bathroom fixtures. Signature
Hardware accepts no liability for any damage to the floor,
walls or for personal injury during installation.
GETTING STARTED
Ensure that you have gathered all the required
materials that are needed for the installation.
WALL-MOUNT TOWEL HOLDER
INSTALLATION INSTRUCTIONS
REVISED 07/10/2019
Pencil
Screwdriver
Drill
Stud Finder
TOOLS AND MATERIALS:
2
INSTALLATION
Note: We recommend anchoring any fixtures that will
bear weight to wall studs or solid wood blocking. If the
studs in your bathroom do not line up to the mounting
location, wood blocking can be installed between the
studs using standard 2 x 4’s. If wood blocking needs to
be installed behind the finished wall, we recommend
consulting a professional if you are unfamiliar with this
type of installation.
3. Use a screwdriver to fasten the wall-mount towel
holder to the wall with the provided screws.
1. Determine the installation location and mark the
wall through each of the mounting holes in the
wall-mount towel holder.
2. Drill the screw holes with the appropriate drill bit for
the wall surface or material.
WALL-MOUNT TOWEL HOLDER
INSTALLATION INSTRUCTIONS
  • Page 1 1
  • Page 2 2

Signature Hardware 445732 Instrukcja instalacji

Typ
Instrukcja instalacji

w innych językach