Panasonic SCTMAX40E Instrukcja obsługi

Confidential

Until:

02 Aug 2019

Dziękujemy za zakupienie tego produktu.

Proszę dokładnie zapoznać się z tą instrukcją obsługi,

aby jak najlepiej wykorzystać to urządzenie i zapewnić

jego bezpieczne użytkowanie.

Prosimy o zachowanie niniejszej instrukcji obsługi.

Kiitos, että hankit tämän tuotteen.

Lue nämä ohjeet huolellisesti parhaan suorituskyvyn ja

turvallisuuden takaamiseksi.

Säilytä ohje tulevaa tarvetta varten.

Tak fordi du har valgt dette produkt.

Læs venligst denne betjeningsvejledning omhyggeligt,

således at optimal ydelse og sikkerhed opnås.

Gem vejledningen til senere brug.

Operating Instructions

Bruksanvisning

Betjeningsvejledning

Käyttöohjeet

Instrukcja obsługi

Návod k obsluze

Wireless Speaker System

Trådlöst högtalarsystem

Trådløst højttalersystem

Langaton kaiutinjärjestelmä

Zestaw głośników bezprzewodowych

Bezdrátová souprava reproduktorů

Model No. SC-TMAX40

SC-TMAX50

TQBJ2193

E

Děkujeme za zakoupení tohoto výrobku.

Pro dosažení optimálního výkonu a z bezpečnostních

důvodu si pečlivě přečtěte tyto pokyny.

Uschovejte si prosím tento návod k obsluze.

Thank you for purchasing this product.

For optimum performance and safety, please read these

instructions carefully.

Please keep this manual for future reference.

Tack för valet av denna apparat.

Läs igenom bruksanvisningen noga för bästa resultat och

för säkerhets skull.

Spara denna bruksanvisning.

This illustration shows SC-TMAX40.

Denna illustration visar SC-TMAX40.

Denne illustration viser SC-TMAX40.

Kuvassa on SC-TMAX40.

Na tej ilustracji pokazano model SC-TMAX40.

Na obrázku je znázorněn SC-TMAX40.

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 1 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

2

TQBJ2193

2

These operating instructions are applicable for models

SC-TMAX40 and SC-TMAX50.

Unless otherwise indicated, illustrations in these operating

instructions are of SC-TMAX40. Your system and the

illustrations can look differently.

Back of product

The symbols on this product (including the accessories)

represent the following:

Table of contents

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Caution for AC mains lead . . . . . . . . . . . . . . . . . . . . . . . 3

Sales and Support Information . . . . . . . . . . . . . . . . . . . . 3

Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Transporting the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Making the connections . . . . . . . . . . . . . . . . . . . . . . . . . 4

Preparing the remote control . . . . . . . . . . . . . . . . . . . . . 5

Overview of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Preparing media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Media playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Sound effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

DJ functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Using a microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Karaoke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Clock and timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

External equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Safety precautions

WARNING!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as vases,

on this unit.

– Use the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

– Do not let metal objects fall inside this unit.

CAUTION!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit

is well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not place sources of naked flames, such as lighted

candles, on this unit.

• This unit is intended for use in moderate climates.

• This unit may receive radio interference caused by

mobile telephones during use. If such interference

occurs, please increase separation between this unit

and the mobile telephone.

• This unit utilizes a laser. Use of controls or adjustments

or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

• Set the unit up on an even surface away from direct

sunlight, high temperatures, high humidity, and

excessive vibration.

• This system might get warm after prolonged usage. This

is normal. Do not be alarmed.

AC mains lead

• The mains plug is the disconnecting device. Install this

unit so that the mains plug can be unplugged from the

socket outlet immediately.

Battery

• Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

• When disposing of the batteries, please contact your

local authorities or dealer and ask for the correct

method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and

windows closed.

• Do not break open or short-circuit the battery.

• Do not charge the alkaline or manganese battery.

• Do not use the battery if the cover has peeled off.

• Remove the battery if you do not use the remote control

for a long period of time. Keep in a cool, dark area.

[TMAX40]:

[TMAX50]:

Indicate features applicable to SC-TMAX40.

Indicate features applicable to SC-TMAX50.

AC

Class II equipment (The construction of the

product is double-insulated.)

ON

Standby

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 2 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

3

TQBJ2193

3

Caution for AC mains lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains

plug for your safety and convenience.

A 3-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that

the replacement fuse has a rating of 3-ampere and that it

is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the

body of the fuse.

If the plug contains a removable fuse cover you must

ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a

replacement cover is obtained.

A replacement fuse cover can be purchased from your

local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC

mains plug (figures A and B). Confirm the AC mains plug

fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

Sales and Support Information

For the United Kingdom and Ireland

Customer Communications Centre

• For customers within the UK: 0344 844 3899

• For customers within Ireland: 01 289 8333

• Monday – Friday 9:00am – 5:00pm (Excluding public

holidays).

• For further support on your product, please visit our

website: www.panasonic.co.uk

Direct Sales at Panasonic UK

• Order accessory and consumable items for your product

with ease and confidence by phoning our Customer

Communications Centre Monday – Friday 9:00am –

5:00pm (Excluding public holidays).

• Or go on line through our Internet Accessory ordering

application at www.pas-europe.com

.

• Most major credit and debit cards accepted.

• All enquiries transactions and distribution facilities are

provided directly by Panasonic UK.

• It couldn’t be simpler!

• Also available through our Internet is direct shopping for

a wide range of finished products. Take a browse on our

website for further details.

Supplied accessories

Check and identify the supplied accessories. Product

numbers correct as of May 2019. These may be subject to

change.

 2 AC mains leads

For the United Kingdom and Ireland

(TNMX213)

 1 FM indoor antenna

(TSAA0009)

 1 Remote control

(N2QAYB001215)

 1 Remote control battery

 For the United Kingdom and Ireland

1 Antenna plug adaptor

(TPBAA172)

Note:

Use the AC mains lead that is suitable for your household

mains socket.

Figure A Figure B

Fuse cover

Fuse (3 ampere)

ENGLISH

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 3 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

4

TQBJ2193

4

Transporting the unit

Preparation

Disconnect all connected devices and cables from the

unit.

Note:

• Keep the unit at least 10 mm away from other objects for

proper ventilation.

• The speakers do not have magnetic shielding. Do not put

them near PCs or other equipment easily influenced by

magnetism.

• When you play at high levels for a long period, it can cause

damage to the speakers and decrease the life of the

speakers.

• Decrease the volume in these conditions to prevent

damage:

– When the sound is distorted.

– When you adjust the sound quality.

Maintenance

Disconnect the AC mains lead before maintenance.

Clean this system with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this

system.

• Before using chemically treated cloth, read the

instructions that came with the cloth carefully.

Making the connections

Connect the AC mains lead only after all the other

connections have been made.

1 Connect the FM indoor antenna.

Put the antenna where reception is best.

CAUTION!

• Improper handling or transportation manner may

cause the unit to fall, etc., resulting in damage

and/or personal injury.

• Do not touch the speaker cone’s reverberating

surfaces:

– This may damage the speaker cone.

– The speaker cone may be hot.

• Do not put the unit on a table or any elevated

surface.

• Do not allow children to climb on the unit.

• Be careful when babies or children are near.

For the United Kingdom and Ireland

Connect the FM outdoor antenna.

Use an outdoor antenna if reception is poor.

CAUTION!

Keep the antenna plug adaptor out of reach of

children to prevent swallowing.

Note:

• Do not use the outdoor antenna during a lightning

storm.

• Disconnect the outdoor antenna if you do not use the

system.

Adhesive tape

(not supplied)

Antenna plug adaptor

75 Ω coaxial cable

(not supplied)

FM outdoor antenna

(not supplied)

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 4 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

5

TQBJ2193

5

2 Connect the AC mains lead.

Do not use any other AC mains lead except the

supplied one.

Hold the unit when connecting or disconnecting the

AC mains lead to prevent the unit from falling.

Conserving power

The system consumes a small amount of power even

when it is in standby mode. Disconnect the power

supply if you do not use the system.

Some settings will be lost after you disconnect the

system. You have to set them again.

Note:

Keep the antennas away from the AC mains lead to avoid

picking up noise.

Preparing the remote control

Use alkaline or manganese battery.

Install the battery so that the poles (+ and –) align with

those in the remote control.

(For the AC mains plug of three pins)

READ THE “Caution for AC mains lead” BEFORE

CONNECTION.

To household mains socket

ENGLISH

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 5 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

6

TQBJ2193

6

Overview of controls

Do the procedures with the remote control. You can also use the buttons on the unit if they are the same.

A Standby/on switch [`], [1]

Press to switch the unit from on to standby mode or

vice versa. In standby mode, the unit is still consuming

a small amount of power.

B Decrease the brightness of the display panel

The illumination is also switched off.

To cancel, press the button again.

C Select the audio source

Press [SELECT <, >] (unit: [SELECT]) repeatedly to

select the source:

On the unit:

To start Bluetooth

®

pairing, press and hold [ ].

D Basic playback control

E View the setup menu

F View the content information

G Select or confirm the option

H Set the sleep timer

I Adjust the volume level

On the unit:

Press [VOL] and then turn [VOLUME/MULTI

CONTROL] to adjust the volume.

Adjust the microphone volume level

Press and hold [–MIC VOL] until “MIC VOL” is shown.

Turn [VOLUME/MULTI CONTROL] to adjust the

volume.

J Mute the sound

To cancel, press the button again.

“MUTE” is also cancelled when you adjust the volume

or when you switch off the system.

K View the play menu

L Select the sound effects

M Select DJ effect or DJ sampler

N Select the illumination effects

O Select MP3 album or track

Press [ALBUM/TRACK] to select album or track.

Browse tracks or albums

Press [R, T] or turn [VOLUME/MULTI CONTROL] to

browse.

To start playback from the selection, press [4/9].

P Select the Karaoke effects

To cancel, press and hold [–OFF] until “OFF EFFECT”

is shown.

Q Volume or multi control knob

Do not turn knob fast to prevent irregular of volume

operation.

R Select DJ jukebox

Select DEMO play

Press and hold [–DEMO] for more than 2 seconds, the

built-in demonstration song will be played.

Press [8] to stop the demonstration.

S Open or close the disc tray

USB A USB B

AUXBLUETOOTH

FMCD

D-IN

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 6 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

7

TQBJ2193

7

T DJ function direct buttons

Press [DJ] to switch on the DJ function.

Press [DJ1] to [DJ6] to select the desired function.

To cancel, press the selected [DJ1] to [DJ6] again.

U Microphone jack

V :USB A

USB port ( )

Play MP3 tracks.

W :USB B

USB port ( )

Play MP3 tracks.

X Remote control sensor

Point the remote control at the remote control

sensor, away from obstacles and within the

operation range.

Distance: Within approximately 7 m

Angle: Approximately 20° up and down, 30° left

and right

Y Display panel

Z Disc tray

SELECT

VOL

DJ6

DJ5

DJ4

DJ3

DJ2

DJ1

SOUND

JUKEBOX

KARAOKE

ALBUM/

TRACK

ILLUMINATION

Top panel

ENGLISH

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 7 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

8

TQBJ2193

8

Preparing media

Disc

1 Press [x] on the unit to open the disc tray.

Put in a disc with the label facing up.

Press again to close the disc tray.

2 Press [SELECT <, >] repeatedly to select “CD”.

USB

Preparation

Before you connect a USB device to the system, make

sure you do a backup of the data.

1 Decrease the volume and connect the USB device

to the USB port.

2 Press [SELECT <, >] repeatedly to select “USB A”

or “USB B”.

Note:

• Do not use a USB extension cable. The system cannot

recognise USB device connected through a cable.

• Some devices cannot be charged as the maximum USB

charging current is 0.5 A only.

Bluetooth

®

You can connect and play an audio device wirelessly

through Bluetooth

®

.

Preparation

• Switch on the unit.

• Switch on the Bluetooth

®

feature of the device and put

the device near the system.

• Read the operating instructions of the device for details.

█

Pairing a device

Preparation

If this system is connected to a Bluetooth

®

device,

disconnect it (~8).

1 Press [ ].

If “PAIRING” is shown, continue with step 3.

2 Press [PLAY MENU] to select “PAIRING” and then

press [OK].

3 Select “SC-TMAX40” or “SC-TMAX50” from the

Bluetooth

®

menu of the device.

If prompted for a passkey, input “0000” or “1234”.

The device connects with this system automatically

after pairing is complete.

The MAC address (example: 6C:5A:B5:B3:1D:0F)

may be shown before “SC-TMAX40” or “SC-TMAX50”

is shown.

The name of the connected device is shown for a few

seconds.

Using the unit

1 Press and hold [ ] until “PAIRING” is shown.

2 Select “SC-TMAX40” or “SC-TMAX50” from the

Bluetooth

®

menu of the device.

Note:

• You can pair up to 8 devices with this system. If a 9th device

is paired, the device that has not been used for the longest

time will be replaced.

• Depending on the searching functionality of the Bluetooth

®

device and the surrounding environment, if the product

name is not shown on the Bluetooth

®

menu of the device,

switch off and then switch on the Bluetooth

®

feature of the

device repeatedly during the pairing process.

█

Connecting a device

Preparation

If this system is connected to a Bluetooth

®

device,

disconnect it (~8).

1 Press [ ].

“BLUETOOTH READY” is shown.

2 Select “SC-TMAX40” or “SC-TMAX50” from the

Bluetooth

®

menu of the device.

The name of the connected device is shown for a few

seconds.

3 Start playback on the device.

Note:

• A device must be paired to connect.

• When “BLUETOOTH” is selected as the source, this system

will automatically try to connect to the last connected device.

(“LINKING” is shown during this process.)

█

Multi Connect

This system supports Multi Connect, which can connect

up to 3 devices simultaneously.

To switch between the connected devices

When one of the connected devices is playing, you can

easily switch control to another connected device simply

by starting a playback on that device. The previous

playback will be paused automatically.

Note:

This function may not work for some apps or devices

(depending on app or device specifications).

█

Disconnecting a device

While a Bluetooth

®

device is connected

1 Press [PLAY MENU] repeatedly to select

“DISCONNECT?”.

2 Press [R, T] to select “OK? YES” and then press

[OK].

“BLUETOOTH READY” is shown.

To cancel, select “OK? NO”.

Using the unit

Press and hold [ ] until “PAIRING” is shown.

Note:

• This function disconnects all connected devices.

• A device is disconnected when you:

– Select a different source.

– Move the device out of the maximum range.

– Disable the Bluetooth

®

transmission of the device.

– Switch off the system or the device.

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 8 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

9

TQBJ2193

9

Media playback

The following marks indicate the availability of the feature.

Basic playback

CD ::USB BLUETOOTH

Note:

Depending on the Bluetooth

®

device, some operations may not

work.

Viewing available information

:CD ::USB BLUETOOTH

You can view the available information, such as MP3

album and track number, on the display panel.

Press [DISPLAY] repeatedly.

Example: MP3 album and track number display.

Note:

• Maximum characters that can be shown: Approximately 32

• This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.

• Text data that the system does not support can show

differently.

Play menu

:CD ::USB

1 :CD :

Press [PLAY MENU].

:USB

Press [PLAY MENU] repeatedly to select

“PLAYMODE”.

2 Press [R, T] to select the setting and then press

[OK].

Note:

• During random playback, you cannot skip to tracks which

have been played.

• The setting is cancelled when you open the disc tray or

disconnect the USB device.

CD :

:USB :

BLUETOOTH :

CD-R/RW in CD-DA format or with MP3

files.

USB device with MP3 files.

Bluetooth

®

device.

Play Press [4/9].

Stop Press [8].

USB

The position is memorised.

“RESUME” is shown.

Press again to stop fully.

Pause Press [4/9].

Press again to continue playback.

Skip Press [2/3] or [5/6] to skip track.

:CD ::USB

Press [R, T] to skip MP3 album.

Search Press and hold [2/3] or [5/6].

Album

number

Track

number

OFF PLAYMODE Cancel the setting.

1-TRACK Play one selected track.

Press [2/3] or [5/6] to

select the track.

1-ALBUM Play one selected MP3 album.

Press [R, T] to select the MP3

album.

RANDOM Play all tracks randomly.

1-ALBUM

RANDOM

Play all tracks in one selected MP3

album randomly.

Press [R, T] to select the MP3

album.

ALL REPEAT Repeat all tracks.

1-TRACK REPEAT Repeat 1-TRACK.

1-ALBUM REPEAT Repeat 1-ALBUM.

RANDOM REPEAT Repeat random playback.

1-ALBUM

RANDOM REPEAT

Repeat 1-ALBUM RANDOM.

ENGLISH

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 9 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

10

TQBJ2193

10

█

Note on disc

• This system can play CD-R/RW with CD-DA or MP3

format content.

• Before playback, finalise the disc on the device it was

recorded on.

• Some CD-R/RW cannot be played because of the

condition of the recording.

█

Note on USB device

• This system does not guarantee connection with all

USB devices.

• This system supports USB 2.0 full speed.

• This system can support USB devices of up to 32 GB.

• Only FAT 12/16/32 file system is supported.

█

Note on MP3 file

• Files are defined as tracks and folders are defined as

albums.

• Tracks must have the extension

“.mp3” or “.MP3”.

• Tracks will not necessarily be played in the order you

recorded them.

• Some files can fail to work because of the sector size.

MP3 file on disc

• This system can access up to:

– 255 albums (including root folder)

–999 tracks

– 20 sessions

• Disc must conform to ISO9660 level 1 or 2 (except for

extended formats).

MP3 file on USB device

• This system can access up to:

– 800 albums (including root folder)

– 8000 tracks

– 999 tracks in one album

Radio

Preparation

Press [SELECT <, >] repeatedly to select “FM”.

Manual tuning

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Or press [8 ] on the unit to select “MANUAL”. Continue

with step 3.

2 Press [R, T] to select “MANUAL” and then press

[OK].

3 Press [2/3] or [5/6] to tune in to the

station.

To tune automatically, press and hold the button until

the frequency starts changing quickly.

Memory presetting

You can preset up to 30 FM stations.

█

Automatic presetting

1 Press [PLAY MENU] to select “A.PRESET”.

2 Press [R, T] to select “LOWEST” or “CURRENT”

and then press [OK].

The tuner presets all the stations it can receive into the

channels in ascending order.

To cancel, press [8].

█

Manual presetting

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Or press [8 ] on the unit to select “MANUAL”. Continue

with step 3.

2 Press [R, T] to select “MANUAL” and then press

[OK].

3 Press [2/3] or [5/6] to tune in to the

station.

4 Press [OK].

5 Press [R, T] to select a preset number and then

press [OK].

Do steps 3 through 5 again to preset more stations.

The new station replaces any station that occupies the

same preset number.

LOWEST Tuning begins from the lowest

frequency.

CURRENT Tuning begins from the current

frequency.

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 10 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

11

TQBJ2193

11

█

Selecting a preset station

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Or press [8] on the unit to select “PRESET”. Continue

with step 3.

2 Press [R, T] to select “PRESET” and then press

[OK].

3 Press [2/3] or [5/6] to select the preset

station.

Improving the sound quality

1 Press [PLAY MENU] repeatedly to select

“FM MODE”.

2 Press [R, T] to select “MONO” and then press

[OK].

To cancel, select “STEREO”.

“MONO” is also cancelled when you change the

frequency.

To memorise the setting

Continue with step 4 of “Manual presetting” (~10).

Checking the signal status

Press [DISPLAY] to select “FM STATUS”.

RDS broadcasting

This system can show the text data transmitted by the

radio data system (RDS) available in some areas.

Press [DISPLAY] repeatedly.

Note:

RDS may not be available if reception is poor.

Sound effects

1 Press [SOUND] repeatedly to select the effect.

2 Press [R, T] to select the setting and then press

[OK].

Or turn [VOLUME/MULTI CONTROL] to select the

setting.

Illumination

You can change the illumination effect on the system.

1 Press [SETUP] repeatedly to select

“ILLUMINATION”.

Or press [ILLUMINATION] on the unit.

2 Press [R, T] to select the effect and then press

[OK].

Or turn [VOLUME/MULTI CONTROL] to select the

effect.

Note:

When the dimmer function is switched on, the illumination on

the system will remain off even when you switch on the

illumination function.

FM–––– The FM signal is weak.

The system is not tuned in to a station.

FM ST The FM signal is in stereo.

FM MONO “MONO” is selected as the “FM MODE”.

The FM signal is in monaural.

PS Programme service

PTY Programme type

FREQ Frequency

PRESET EQ

“ROCK”, “POP”, “AFRO BEAT”,

“ARABIC”, “PERSIAN”, “INDIA

BASS”, “DANGDUT”, “MALAY

POP”, “ELECTRONICA”,

“REGGAETON”, “SALSA”,

“SAMBA”, “FOOTBALL”,

“KARAOKE” or “FLAT”

BASS/MID/TREBLE –4 to +4

Note:

These settings can change when you

select a PRESET EQ setting.

SURROUND

“ON SURROUND” or

“OFF SURROUND”

D.BASS LEVEL “OFF”, “LEVEL 1” to “LEVEL 6”

PATTERN [TMAX50]

A selection of 12 illumination patterns in

multiple colors.

[TMAX40]

A selection of 10 illumination patterns in

multiple colors.

COLOR

A selection of 60 different illumination colors

on the speakers.

OFF Cancel the effect.

ENGLISH

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 11 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

12

TQBJ2193

12

DJ functions

You can use the DJ functions to add sound effects or

sample sound between songs.

Note:

The DJ function is switched off when you switch off the system

or change to another source.

DJ jukebox

:USB

You can use the DJ jukebox function to add sample sound

mix between songs.

1 Press [PLAY MENU] to select “JUKEBOX”.

2 Press [R, T] to select the setting and then press

[OK].

Using the unit

1 Press [JUKEBOX] to select “DJ JUKEBOX

SELECT NUMBER”.

To cancel, select “OFF JUKEBOX”.

2 Press [DJ1] to [DJ6] to select the effect.

Sample sound is added to the intervals of all tracks.

To cancel, press the button again.

Note:

The system switches to repeat mode automatically when you

switch on DJ jukebox.

█

Changing the repeat setting

1 Press

[PLAY MENU] repeatedly to select

“PLAYMODE”.

2 Press [R, T] to select the setting and then press

[OK].

Note:

You cannot select the DJ jukebox effect when you are using

“RANDOM MIX REPEAT” mode.

DJ effect

(Except for D-IN and AUX source)

By unit only

You can use the DJ effect function to add sound effects.

1 Press [DJ] to select “DJ EFFECT SELECT

NUMBER” or “ON DJ EFFECT”.

To cancel, select “OFF EFFECT”.

2 Press [DJ1] to [DJ6] to select the effect.

To cancel, press the button again.

3 Turn [VOLUME/MULTI CONTROL] to select the

setting.

Note:

DJ effect is switched off when you switch off the system,

change to D-IN, AUX source.

DJ sampler

(Except for D-IN and AUX source)

By unit only

You can apply a scratch sound or sample sound to the

track you are playing.

1 Press [DJ] to select “SAMPLER SELECT

NUMBER” or “ON SAMPLER”.

To cancel, select “OFF EFFECT”.

2 Press [DJ1] to [DJ6] to select the desired sound.

To cancel, press the button again.

3 Turn [VOLUME/MULTI CONTROL].

Using the “Panasonic MAX Juke” app

You can download and install the free Android™ app

“Panasonic MAX Juke” on Google Play™ for additional

features, such as to request song playback from multiple

devices simultaneously. You can also call up the tracks

you want to play through the app. For details on the app,

refer to the site below.

http://av.jpn.support.panasonic.com/support/global/

cs/audio/app/

(This site is in English only.)

RANDOM REPEAT Repeat random playback.

ALL TITLE REPEAT Repeat all tracks.

RANDOM MIX

REPEAT

Repeat random playback. Sample

sound is added to the intervals of

all tracks.

[DJ1] PHASER

Add space and dimension to the sound.

[DJ2] FILTER

Enhance or filter specific ranges of the sound.

[DJ3] SOUND CHOPPER

Cut off the sound periodically.

[DJ4] ELECTRO ECHO

Add digital echo to the sound.

[DJ5] PITCH SHIFTER

Adjust the keys of the sound.

[DJ6] HARMONIZER

Add notes to the sound to create harmony.

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 12 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

13

TQBJ2193

13

Using a microphone

Preparation

Decrease the volume of the system to its minimum before

you connect or disconnect a microphone.

1 Connect a microphone (not supplied) to the

microphone jack.

Plug type: Ø 6.3 mm monaural

2 Press [SOUND] on the remote control repeatedly

to select “MIC VOL”.

Or press and hold [–MIC VOL] until “MIC VOL” is

shown.

3 Press [R, T] to adjust the volume of the

microphone and then press [OK].

Or turn [VOLUME/MULTI CONTROL] to adjust the

volume of the microphone.

4 If you want to sing with the background music,

play the music source and adjust the volume of

the system.

Note:

• If a strange noise (howling) is emitted, move the microphone

away from the speakers, or decrease the volume of the

microphone.

• When you do not use the microphone, disconnect it from the

microphone jack, and decrease the volume of the

microphone to its minimum.

Karaoke

Preparation

Select the music source.

Note:

The Karaoke function is switched off when you switch off the

system.

Karaoke effect

You can use the Karaoke effect function to add sound

effects.

1 Press [SOUND] on the remote control repeatedly

to select “KARAOKE EFFECT” and then press

[R, T] to select the effect.

Or press [KARAOKE] repeatedly to select the effect.

To check the current setting, press [OK].

2 Press [2/3] or [5/6] to select the setting

and then press [OK].

Or turn [VOLUME/MULTI CONTROL] to select the

setting.

VOCAL

CANCEL

Reduce the vocal level or change the

audio mode (depending on the source).

ECHO Add an echo effect to the sound.

KEY

CONTROL

Change the key of a song.

Note:

The setting is cancelled when you change

to another source.

TEMPO

:USB

Change the speed of a song.

BGM Change the background music level.

MIC EQ Select a MIC EQ mode.

OFF

EFFECT

Cancel the effect.

Press [OK] to confirm.

Or press and hold [–OFF] until “OFF

EFFECT” is shown.

VOCAL

CANCEL

“OFF”, 1 to 3, “L”, “R”, “L+R”

When using stereo source not

formatted for Karaoke

It is recommended to use “2 VOCAL

CANCEL” for most songs.

When using Karaoke formatted

source

L: Only left channel sound

(accompaniment only)

R: Only right channel sound (vocals

only)

L+R: Left and right channel sounds are

mixed

ECHO “OFF”, 1 to 4

KEY

CONTROL

–6 to +6

TEMPO “OFF”, –2 to +2

BGM “OFF”, 1 to 3

MIC EQ “SINGING” or “SPEECH”

ENGLISH

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 13 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

14

TQBJ2193

14

Clock and timers

Setting the clock

This is a 24-hour clock.

1 Press [SETUP] repeatedly to select “CLOCK”.

2 Press [R, T] to set the time and then press [OK].

To check the time

Press [SETUP] to select “CLOCK” and then press

[OK].

In standby mode, press [DISPLAY].

Note:

• The clock is reset when there is a power failure or when the

AC mains lead is disconnected.

• Reset the clock regularly to maintain accuracy.

Sleep timer

The sleep timer switches off the system after the set time.

Press [SLEEP] to select the setting (in minutes).

To cancel, select “OFF”.

To check the remaining time

Press [SLEEP].

Note:

• The remaining time is shown for a few seconds every

minute. “SLEEP 1” is always shown when only 1 minute

remains.

• The sleep timer always comes first. Be sure not to set an

overlap of timers.

Play timer

(Except for Bluetooth

®

, D-IN and AUX source)

You can set the timer to come on at a certain time to wake

you up.

Preparation

Set the clock.

1 Press [SETUP] repeatedly to select “TIMER ADJ”.

2 Press [R, T] to select “#PLAY” and then press

[OK].

3 Press [R, T] to set the start time and then press

[OK].

4 Do step 3 again to set the end time.

5 Press [R, T] to select the source you want to play

and then press [OK].

To start the timer

1 Prepare the source you want to listen to

(disc, USB or radio).

2 Press [SETUP] repeatedly to select “TIMER SET”.

3 Press [R, T] to select “PLAY ON” and then press

[OK].

To cancel, select “PLAY OFF”.

The system must be switched off for the timer to

operate.

To check the setting

1 Press [SETUP] repeatedly to select “TIMER ADJ”.

2 Press [R, T] to select “#PLAY” and then press

[OK].

In standby mode, press [DISPLAY] two times.

Note:

• The timer starts at a low volume and increases gradually to

the preset level.

• The timer comes on at the set time every day if the timer is

on.

• If you switch off the system and then switch on again while a

timer is in operation, the timer will not stop at the end time.

External equipment

Preparation

• Disconnect the AC mains lead.

• Switch off all equipment and read the appropriate

operating instructions.

Note:

• Do not bend cables at sharp angles.

• Components and cables are sold separately.

• Sound distortion can occur when you use an adapter.

• If you want to connect equipment other than those

described, refer to the audio dealer.

Using the optical input

You can connect a TV, VCR, DVD player etc., and listen to

the audio through this system.

1 Connect the external equipment.

2 Press [SELECT <, >] repeatedly to select “D-IN”.

3 Play the external equipment.

SLEEP 30 SLEEP 60 SLEEP 90 SLEEP120

OFF

Rear panel

of this unit

Optical digital

audio cable

(not supplied)

TV (not supplied)

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 14 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

15

TQBJ2193

15

Note:

• This system supports linear PCM signal.

• Multi-channel source will be converged to 2 channels.

• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz, up to 96 kHz

• The sound is muted if the signal format or frequency is not

supported.

• If there are sounds coming from the TV’s speakers,

decrease the volume of the TV to its minimum.

Using the auxiliary input

You can connect a VCR, DVD player etc., and listen to the

audio through this system.

1 Connect the external equipment.

2 Press [SELECT <, >] repeatedly to select “AUX”.

3 Play the external equipment.

Others

Auto off

This function will automatically switch the unit to standby

mode if there is no sound and it is not being used for

approximately 20 minutes.

1 Press [SETUP] repeatedly to select “AUTO OFF”.

2 Press [R, T] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

• This function does not work when you are in radio source.

• This function may not work when a microphone is

connected.

• The factory default is “ON”. To switch off this function, select

“OFF”.

Bluetooth

®

standby

This function automatically switches on the system when

you establish a Bluetooth

®

connection from a paired

device.

1 Press [SETUP] repeatedly to select “BLUETOOTH

STANDBY”.

2 Press [R, T] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

Some devices may take longer to respond. If you are

connected to a Bluetooth

®

device before switching off the

system, wait for a minimum of 5 seconds before connecting to

this system from your Bluetooth

®

device again.

Software update

Occasionally, Panasonic may release updated software

for this unit that may add or improve the way a feature

operates. These updates are available free of charge. For

more details, refer to the following website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

█

Checking the software version

1 Press [SETUP] repeatedly to select “SW VER.”

and then press [OK].

The software version is shown.

2 Press [OK] again to exit.

Rear panel

of this unit

Audio cable

(not supplied)

DVD player (not supplied)

ENGLISH

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 15 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

16

TQBJ2193

16

Troubleshooting

Before requesting service, make the following checks. If

you are in doubt about some of the check points, or if the

solutions indicated do not solve the problem, consult your

dealer for instructions.

█

Common problems

The unit does not work.

• The safety device has been activated. Do the following:

1. Press [1] on the unit to switch the unit to standby mode.

If the unit does not switch to standby mode, disconnect

the AC mains lead and then connect it again.

2. Press [1] again to switch on the unit. If the problem

persists, consult your dealer.

The display panel lights up and changes continuously in

standby mode.

• Press and hold [8] on the unit until “SDEMO OFF” is shown.

No operations can be done with the remote control.

• Examine that the battery is installed correctly.

Sound is distorted or no sound.

• Adjust the volume of the system.

• Switch off the system, determine and correct the cause, and

then switch on again. It can be caused by straining of the

speakers through excessive volume or power, and when

using the system in a hot environment.

A humming sound can be heard during playback.

• An AC mains lead or fluorescent light is near the cables.

Keep other appliances and cords away from the cables of

this system.

The sound level reduces.

• The protection circuit has been activated due to the

continuous use at high volume output. This is to protect the

system and maintain the sound quality.

█

Disc

Display not shown correctly.

Playback does not start.

• You have not put in the disc correctly. Put it in correctly.

• Disc is dirty. Clean the disc.

• Replace the disc if it is scratched, warped, or non-standard.

• There is condensation. Let the system dry for 1 to 2 hours.

The total number of tracks shown is incorrect.

The disc cannot be read.

Distorted sound is heard.

• You put in a disc that the system cannot play. Change to a

playable disc.

• You put in a disc that has not been finalised.

█

USB

The USB device or the contents in it cannot be read.

• The format of the USB device or the contents in it are not

compatible with the system.

• USB devices with storage capacity of more than 32 GB

cannot work in some conditions.

Slow operation of the USB device.

• Large content size or large memory USB device takes

longer time to read.

█

Bluetooth

®

Pairing cannot be done.

• Check the Bluetooth

®

device condition.

• The device is out of the 10 m communication range. Move

the device nearer to the system.

The device cannot be connected.

• The pairing of the device was unsuccessful. Do pairing again

(~8).

• The pairing of the device has been replaced. Do pairing

again (~8).

• This system might be connected to a different device.

Disconnect the other device and try connecting the device

again.

• The system may have a problem. Switch off the system and

then switch on again.

The device is connected but audio cannot be heard

through the system.

• For some built-in Bluetooth

®

devices, you have to set the

audio output to “SC-TMAX40” or “SC-TMAX50” manually.

Read the operating instructions of the device for details.

Playback during Multi Connect is not working or no

sound.

• Restart the app of the device.

• The control of the device was not switched successfully.

Disconnect the existing connected devices and try again.

Sound from the device is interrupted.

• The device is out of the 10 m communication range. Move

the device nearer to the system.

• Remove any obstacle between the system and the device.

• Other devices that use the 2.4 GHz frequency band

(wireless router, microwaves, cordless phones, etc.) are

interfering. Move the device nearer to the system and

distance it from the other devices.

█

Radio

Sound is distorted.

• Use an optional FM outdoor antenna. The antenna should

be installed by a competent technician.

A beat sound is heard.

• Switch off the TV or move it away from the system.

• Move mobile telephones away from the system if the

interference is apparent.

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 16 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

17

TQBJ2193

17

█

Unit displays

“--:--”

• You connected the AC mains lead for the first time or there

was a power failure recently. Set the clock.

• Track play time is more than 99 minutes.

“ADJUST CLOCK”

• The clock is not set. Adjust the clock.

“ADJUST TIMER”

• The play timer is not set. Adjust the play timer.

“AUDIO UNSUPPORTED”

• The signal format or frequency is not supported.

• This system does not support bitstream signals. Change the

digital audio output setting on the external equipment to

PCM.

• This system supports sampling frequencies of 32 kHz,

44.1 kHz, 48 kHz, up to 96 kHz. Select only the supported

sampling frequencies on the connected equipment.

• Try connecting the external equipment by using the auxiliary

input.

“AUTO OFF”

• The system has not been used for 20 minutes and will

switch off within a minute. To cancel, press any button.

“DEVICE CONNECTED FULL”

• You have connected 3 Bluetooth

®

devices. To connect

another device, disconnect one of the connected devices

and try again.

“ERROR”

• An incorrect operation was done. Read the instructions and

try again.

“F” / “F” (“” represents a number.)

• The protection circuit has been activated and the system

may be switched off automatically.

• Disconnect the AC mains lead and wait for a few seconds

before connecting it again. If the problem persists,

disconnect the AC mains lead and consult your dealer.

“NO DISC”

• You have not put in a disc.

“NO PLAY”

“UNSUPPORT”

• There is no album or track in the USB device.

• Examine the content. You can only play supported format.

• The files in the USB device can be corrupted. Format the

USB device and try again.

• The system may have a problem. Switch off the system and

then switch on again.

“NOT SUPPORT MULTI CONNECT”

• The Bluetooth

®

connection cannot be established.

Disconnect the existing connected devices and try again.

“NOT SUPPORTED”

• To use Karaoke effect in D-IN source, change the digital

audio output setting on the external equipment to PCM.

“PLAYERROR”

• An unsupported MP3 file has been played. The system will

skip that track and play the next one.

“REMOTE 1”

“REMOTE 2”

• The remote control and the unit are using different codes.

Change the code of the remote control.

– When “REMOTE 1” is shown, press and hold [OK] and

[ ] on the remote control for a minimum of 4 seconds.

– When “REMOTE 2” is shown, press and hold [OK] and [<]

for a minimum of 4 seconds.

“USB A NO DEVICE”

“USB B NO DEVICE”

• The USB device is not connected. Examine the connection.

“USB OVER CURRENT ERROR”

• The USB device is drawing too much power. Disconnect the

USB device, switch off the system and then switch on again.

• Check the connection, it may be caused by a faulty USB

cable.

“VBR”

• The system cannot show the remaining play time for variable

bit rate (VBR) tracks.

ENGLISH

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 17 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

18

TQBJ2193

18

Remote control code

When other Panasonic equipment responds to the remote

control of this system, change the remote control code for

this system.

Preparation

Press [SELECT] repeatedly on the unit to select “AUX”.

█

To set the code to “REMOTE 2”

1 Press and hold [SELECT] on the unit and [<] until

“REMOTE 2” is shown.

2 Press and hold [OK] and [<] for a minimum of

4 seconds.

█

To set the code to “REMOTE 1”

1 Press and hold [SELECT] on the unit and [ ] on

the remote control until “REMOTE 1” is shown.

2 Press and hold [OK] and [ ] on the remote

control for a minimum of 4 seconds.

System memory reset

Reset the memory when the following situations occur:

• There is no response when buttons are pressed.

• You want to clear and reset the memory contents.

1 Press and hold [1] on the unit until “RESET?” is

shown.

2 While you press and hold [1] on the unit, press

[SELECT].

“RESET” is shown.

After “–––––––––” is shown, the unit will switch

off automatically.

All the settings are set back to the factory preset.

It is necessary to set the memory items again.

DEMO play

The unit will play built-in demonstration song for 1 minute.

1 Press and hold for more than 2 seconds.

“WAIT FOR DEMO PLAY” is shown while you press

and hold the button.

Demonstration song is played and “DEMOPLAY” is

shown.

2 Press [8] to stop the demonstration song.

References

About Bluetooth

®

Frequency band

• This system uses the 2.4 GHz frequency band.

Certification

• This system conforms to the frequency restrictions and

has received certification based on frequency laws.

Thus, a wireless permit is not necessary.

• The actions below are punishable by law in some

countries:

– Taking apart or modifying the unit.

– Removing specification indications.

Restrictions of use

• Wireless transmission and/or usage with all Bluetooth

®

equipped devices is not guaranteed.

• All devices must conform to standards set by the

Bluetooth SIG, Inc.

• Depending on the specifications and settings of a

device, it can fail to connect or some operations can be

different.

• This system supports Bluetooth

®

security features. But

depending on the operating environment and/or

settings, this security is possibly not sufficient. Transmit

data wirelessly to this system with caution.

• This system cannot transmit data to a Bluetooth

®

device.

Range of use

• Use this device at a maximum range of 10 m.

• The range can decrease depending on the environment,

obstacles or interference.

Interference from other devices

• This system may not function properly and troubles

such as noise and sound jumps may arise due to radio

wave interference if this unit is located too close to other

Bluetooth

®

devices or the devices that use the 2.4 GHz

band.

• This system may not function properly if radio waves

from a nearby broadcasting station, etc. is too strong.

Intended usage

• This system is for normal, general use only.

• Do not use this system near an equipment or in an

environment that is sensitive to radio frequency

interference (example: airports, hospitals, laboratories,

etc.).

Panasonic bears no responsibility for data and/or

information that is compromised during a wireless

transmission.

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 18 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

19

TQBJ2193

19

Licenses

The Bluetooth

®

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Panasonic Corporation is under license.

Other trademarks and trade names are those of their

respective owners.

Android and Google Play are trademarks of Google

LLC.

Disposal of Old Equipment and Batteries

Only for European Union and countries with

recycling systems

These symbols on the products, packaging,

and/or accompanying documents mean that

used electrical and electronic products and

batteries must not be mixed with general

household waste.

For proper treatment, recovery and recycling

of old products and used batteries, please

take them to applicable collection points in

accordance with your national legislation.

By disposing of them correctly, you will help to

save valuable resources and prevent any

potential negative effects on human health

and the environment.

For more information about collection and

recycling, please contact your local

municipality.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

Note for the battery symbol (bottom

symbol):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

ENGLISH

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 19 Tuesday, July 16, 2019 10:45 AM

offset printing

Confidential

Until:

02 Aug 2019

20

TQBJ2193

20

Specifications

█

General

Dimensions (W x H x D)

[TMAX50] 305 mm x 904 mm x 326 mm

[TMAX40] 305 mm x 804 mm x 326 mm

Mass

[TMAX50] 20 kg

[TMAX40] 17.5 kg

Operating temperature range 0°C to +40°C

Operating humidity range

35% to 80% RH (no condensation)

█

Amplifier section

RMS output power stereo mode [TMAX50]

Front Ch (both ch driven)

500 W per channel (3 Ω), 1 kHz, 30% THD

Subwoofer Ch (x 2)

500 W per channel (3 Ω), 100 Hz, 30% THD

Total RMS stereo mode power 2000 W

RMS output power stereo mode [TMAX40]

Front Ch (both ch driven)

200 W per channel (6 Ω), 1 kHz, 30% THD

Subwoofer Ch (x 2)

400 W per channel (3 Ω), 100 Hz, 30% THD

Total RMS stereo mode power 1200 W

█

Tuner section

Frequency modulation (FM)

Preset memory 30 stations

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals 75 Ω (unbalanced)

█

Disc section

Disc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3 )

MPEG-1 Layer 3

Pick up

Wavelength 790 nm (CD)

NORSK

Bølgelengde 790 nm (CD)

Laserstyrke Ingen farlig stråling sendes ut

█

Terminal section

USB port

USB standard USB 2.0 full speed

Media file format support MP3 (*.mp3)

USB device file system FAT12, FAT16, FAT32

Digital audio input

Optical digital input Optical terminal

Sampling frequency

32 kHz, 44.1 kHz, 48 kHz, 96 kHz

Audio format PCM

Microphone

Terminal Mono, 6.3 mm jack (2 system)

Analog audio input

Audio input Pin jack (1 system)

█

Bluetooth

®

section

Version Bluetooth

®

Ver. 5.0

Class Class 1

Supported profiles A2DP, AVRCP, SPP

Frequency band 2.4 GHz band FH-SS

Operating frequency 2402 MHz to 2480 MHz

Maximum power (EIRP) 8 dBm

Operation distance 30 m line of sight

Supported codec SBC

█

Speaker section

Front speaker

Speaker unit(s)

Tweeter 6 cm cone type x 2

Woofer 10 cm cone type x 2

Subwoofer

Speaker unit(s)

[TMAX50]

Super Woofer 20 cm cone type x 2

[TMAX40]

Super Woofer 20 cm cone type x 1

Note:

• Specifications are subject to change without notice.

Mass and dimensions are approximate.

• Total harmonic distortion is measured by the digital spectrum

analyser.

Power supply AC 220 V to 240 V, 50 Hz

Power consumption

[TMAX50] 277 W

[TMAX40] 196 W

Power consumption in standby mode (approximate)

With “BLUETOOTH STANDBY” set to “OFF” 0.5 W

With “BLUETOOTH STANDBY” set to “ON” 0.6 W

TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 20 Tuesday, July 16, 2019 10:45 AM

offset printing

Strona się ładuje...

Panasonic SCTMAX40E Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Panasonic SCTMAX40E Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty