GE JXTR31C Instrukcja instalacji

GE
Marka
GE
Model
JXTR31C
Typ
Instrukcja instalacji

Niniejsza instrukcja jest również odpowiednia dla

{c}.
INSTRUCTIONS TO INSTALL TRIM KIT
Toinstall the trim ring when the opening is larger than 28 l/Y x 19 1/2” follow these directions.
Measure the kw”dfhof the present opening
minus 28 IL? ( See figure 1).
Divide remainder by twwand this will
give yuu the w“dth of wood pieces 10be
nailed or screwed to each end of the
opening.
Use wmd thatis the same thickness as
3. Atler the cutoutsize has been reduced to 28 lflx
19 1/7 center the trim ring over the ~ening with
w“deredge of the trim to the front of the counter
unit.
the counter !w. Men attaching be sure
the tm is level with the countertop.
)
COUNTER
TOP
MAXIMUM OPENING
‘ SIZE Tt+AT TRIM
Fig. I
KIT WILL COVER
~iAt) OF
WATERPROOF CAULK
Fig. 3
4 (a). Place lhe counter unit into the trim ring.
(b). At/ach both the counter unit and trim ring to
the counter top with wood screws (See fig.
4).
2 (a).
(b).
Measure the depth of the present opening
minus 19 1/? ( See fig. 1).
Divide this remainder by h-wand this will give
you the nidth of the wwod pieces to be
attached to the front and back of your counter
top opening (See fig. 2).
Fig. 2
,_ ——
‘~ FIN ISI+E[) OF(hJIFJG
?8 1/?” x 1!’) 1/2”
Pub. 31-10178 SR10278
INT149-1
.
—. —..
Fig. 4
5.
+- /0{”]8,
&/l ,
.— ...— ——-
After counter unit has been securely anchored to
the counter top, wipe off any excess caulk that
may have squeezed from beneath fhe trim ring.
F7w-
  • Page 1 1

GE JXTR31C Instrukcja instalacji

GE
Marka
GE
Model
JXTR31C
Typ
Instrukcja instalacji
Niniejsza instrukcja jest również odpowiednia dla
Pobierz PDF
raport

w innych językach

Inne dokumenty