Streamline SF-FG03-024 Instrukcja obsługi

Typ
Instrukcja obsługi
Vivid
SF-FG03-220
SF-FG03-024
Codes:
INSTRUCTION MANUAL
INSTR-SF-FG03
English
STREAMLINE® disclaims all liability for damage or injury as a result of improper or unreasonable use or
failure to follow operating instructions of the Vivid™ PRO
ABC
DEF
G
Main Power Switch
Flow Rate Knob
Lock Up Button
Chemical Tank Trigger
LED Control Panel Nozzle Cover
About your system
Warning
F
A
B
C
D
E
G
2W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 3
1. Charge battery before operating.
2. If your fogger is the Li-ion battery version,
to maintain battery health: Every 2 months,
drain and then fully charge the battery.
Do not charge for more than 10 hours.
3. Do not turn the machine upside down while
it contains solution.
4. After spraying chemicals, spray
clean water.
5. Do not splash any liquid on machine.
6. Avoid spraying strongly-corrosive chemicals
if possible. Otherwise, immediately spray
clean water.
7. When adjusting flow rate, be careful
where the nozzle pointed.
8. Before storing, rinse solution tank with
clean water.
Vivid
Operation Manual
1. Fill solution tank and ensure the tank
cap is screwed on securely. If your
fogger is the Li-ion battery version,
ensure the battery is charged.
4. Open flow rate knob
2. Turn on the main power switch 5. Pull the trigger to spray, release to
stop spraying
3. Press ON/OFF button
Main power switch
“0” is o
Flow rate kniob
ON/OFF button
Trigger
Press Trigger Release Trigger
4W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 5
Vivid
6. To spray continuously, use the lock
up button to lock the trigger in the
pulled position.
1. Release trigger
7. To adjust flow rate or droplet size, use the flow rate knob. Turn flow rate knob counter-clockwise to
increase flow rate and droplet size.
ON/OFF button
To stop spraying
2. Dial Down the flow rate knob
3. Press ON/OFF button
4. Turn o the main power switch on
the handle
ON/OFF button
Main powe switch
6W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 7
Vivid
1. Push the locker button 5. Reinsert battery
Attention: Upper side is with groove.
2. Remove battery
3. The battery can be charged
after it is removed.
4. A green indicator light means
charge is complete.
Main power switch
Locker button
Charging the battery
(This is only applicable if you have the Li-ion battery version)
3 4
8W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 9
Vivid
Adjusting the speed of the motor
Setting Up the Vivid™ PRO Fogger before use:
Fogging method:
Activating the timer & setting a time limit for fogging
Trouble shooting
1. Press twice
1. Press once
1. Press again
2. Press to select the desired limit
2. Press to select “timing”
3. Once speed is selected, press and you have set the new speed
3. Once the timer is set, press twice
The fogger is turned on but wont start up by pressing button?
5. Turn the power o at the main power switch and then turn back on.
2. Press to select the desired limit
1. Firstly ensure you’re using the correct PPE for the environment you’re working in. e.g. facemask,
eye goggles, gloves and body coverall
2. If you’re using Vivid™ SENSE solution this can be poured straight into the solution tank without being diluted.
3. Remove the tank lid and carefully fill the tank with fogging solution ensuring solution is not spilt on
the Vivid™ fogger. Once full, screw the lid back on and you’re ready to start
1. Before you start, open any windows in the area you’re fogging.
2. Plan your route for fogging, with the exit to the room behind you
3. Switch on the Vivid™ PRO Fogger and move it from side to side working from the ceiling down
to the floor ensuring all surfaces have a good covering.
4. When complete, switch o the machine and exit the room.
5. If you’re using the Vivid™ SENSE Fogging Solution, an internal unventilated room will require up to
30 mins stand time before re-occupation, where as a well ventilated area will only require up to 15 minutes.
10 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 11
Vivid
STREAMLINE® systems can be built according to customers’ exact requirements
For non-standard systems, the user’s needs or specifications are listened to and turned
into reality.
Whilst price is important, quality is remembered long after price is forgotten
We insist on sourcing brand name products from around the world, only of a reputable
quality, and bring them together under the STREAMLINE® name
• All STREAMLINE® products carry a full one year’s warranty, according to the manufacturers’
standard terms and conditions of sale.
We have an in-house technical helpline able to answer most of your questions relating to the
capabilities and functionalities of all STREAMLINE® products
If we get it wrong, we will put it right. If you are sent a wrong item, we will immediately
attend to sending you the correct item and arrange a collection of the wrong item without
any quibbles
STREAMLINE® is backed by a comprehensive range with massive stocks providing you with a
‘one stop shop’ for all your requirements.
Flexibility
Quality
Service
Why STREAMLINE®?
STREAMLINE® Warranty
MANUFACTURED
IN THE
UNITED KINGDOM
CHECKED AND
TESTED BY
QUALITY CONTROL
The warranty on all Machines and Equipment is
for 1 year (12-months) from RECORDED DATE
OF PURCHASE.
THIS WARRANTY EXCLUDES NORMAL
MAINTENANCE ITEMS, including but not limited
to HOSES, FILTERS, O-RINGS,
DIAPHRAGMS, VALVES, GASKETS,
CARBON BRUSHES and damage to motors
and other components as a result of failure to
replace normal maintenance items. THIS LIST
IS NOT EXHAUSTIVE.
If STREAMLINE® receives notice of such defects
during the warranty period, STREAMLINE®
will either, at its opinion, repair or replace
components which prove to be defective.
Replacement parts will only be supplied under
warranty, upon the inspection and approval of
the defective parts by STREAMLINE®.
Should it be necessary to supply replacement
parts before the opportunity to inspect, these
will be charged at current prices and credit will
only be issued upon subsequent inspection and
warranty approval by STREAMLINE®.
The customer is responsible for the cost of
return of the defective part. If warranty is
approved, STREAMLINE® will pay for the cost
of the repaired or replacement part.
This warranty excludes the following conditions
and circumstances which are at the discretion
of STREAMLINE®:
Wear and tear, misuse, abuse improper
maintenance, frost damage, the use of chemicals
other than those supplied or approved by
STREAMLINE®, improper installation or repair,
unauthorised modification, incidental or
consequential costs, loss or damage, service,
labour or third party charges, the cost of
returning defective parts to STREAMLINE®.
This warranty constitutes the exclusive remedy
of any purchaser of a STREAMLINE® unit and
is in lieu of all other warranties, express or
implied, including without limitation any implied
warranty of merchantability or fitness for use, to
the fullest extent permitted by law. In no event
shall any implied warranty of merchantability or
fitness for use exceed the term of the applicable
warranty stated above and STREAMLINE® shall
have no other obligation or liability.
Important
Unfortunately these rights cannot be
transferred to a third party.
12 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 13
Vivid
Hamilton House, 8 Fairfax Road,
Heathfield Industrial Estate,
Newton Abbot
Devon, TQ12 6UD
United Kingdom
Telephone: +44 (0) 1626 830 830
Email: sales@streamline.systems
Visit: www.streamline.systems INSTR-SF-FG03
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Streamline SF-FG03-024 Instrukcja obsługi

Typ
Instrukcja obsługi

w innych językach