Delock Converter USB 2.0 > Serial RS-232 5 kV Isolation
Opis
This USB 2.0 to serial RS-232 converter by Delock offers
an RS-232 connection for measuring devices, POS
systems, printers, modems, IoT devices etc. The galvanic
isolation prevents data transmission errors with uneven
earthing potentials, ground loops or voltage spikes. The
converter is suitable for DIN rail mounting.
Galvanic isolation
The galvanic isolation (5 KV) is done with optical isolators.
Specyfikacja
• Connector:
Host: 1 x Mini USB 2.0 B female
Device: 1 x D-Sub 9 pin Serial RS-232 male
• Chipset: FTDI
• Data transfer rate up to 1 Mb/s
• LED indicators for status TX / RX
• 5 kV optical isolation
• ± 15 kV ESD protection for all signal pins
• Power consumption: 70 mA / 350 mW
• Power supply via USB (Bus-Powered)
• Operating temperature: - 30° ~ 75° C
• Storage temperature: - 40° ~ 85° C
• Relative humidity: 5 ~ 95 % (not condensing)
• Housing: plastic
• Dimension (LxWxH): ca. 93 x 42 x 22 mm
Wymagania systemowe
• Windows XP/XP-64/Vista/Vista-64/7/7-64/8/8-64/10/10-64, Mac OS 10.5,
Linux Kernel 2.6
• PC or notebook with one free USB port
Zawartość opakowania
• Converter
• USB 2.0 cable, length: ca. 1 m
• Mounting set for DIN rail
• Driver CD
• User manual
Numer artykułu 62502
EAN: 4043619625024
Kraj pochodzenia: Taiwan, Republic
of China
Opakowanie: • Box
Zdjęcia
General
Funkcja : Plug & Play
Mounting type: Montaż na szynie DIN 35 mm
Specyfikacja : RS-232 (EIA / TIA)
USB 2.0
Supported operating system: Linux Kernel 2.6 lub nowszy
Mac OS 10.14.1 lub nowszy
Windows 10 32-bit
Windows 10 64-bit
Windows 7 32-bit
Windows 7 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows Server 2012 R2
Windows Server 2012
Windows Server 2016
Wskaźnik LED: RX / TX
Protection: ESD (Electrostatic Discharge)
Galvanische Trennung
Interface
Złącze 1: 1 x USB 2.0 Type Mini-B female
Złącze 2: 1 x Serial RS-232 DB9 male
Technical characteristics
Chipset: FTDI 232R
Szybkość transmisji danych: up to 921.6 Kbps
Temperatura robocza: -30 °C ~ 75 °C
Humidity: 5 ~ 95 %
Signal transmission: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Data transmission: asynchronous
full duplex
Bi-directional
Napięcie: USB Bus powered (no additional power supply required)
Current consumption: < 100 mA
UART: USB to serial UART
Support: Modbus
Physical characteristics
Obudowa kolor: czarny
Materiał obudowy: Plastik
Wykończenie pinów: pozłacane
Typ śrubek: #4-40 UNC
Długość: 93 mm
Width: 42 mm
Height: 22 mm
Overvoltage protection: ±15 kV ESD Human Body Model (HBM)
±15 kV EN / IEC 61000-4-2 Wyładowanie w szczelinie powietrza
-
1
-
2
-
3
