Delock Converter USB 2.0 > Serial RS-422/485 with 3 kV
Isolation
Opis
This USB 2.0 to serial RS-422/485 converter by Delock
offers an RS-422/485 connection for measuring devices,
POS systems, printers, modems, IoT devices etc. The
galvanic isolation prevents data transmission errors with
uneven earthing potentials, ground loops or voltage spikes.
The converter is suitable for DIN rail mounting.
Galvanic isolation
The galvanic isolation (3 KV) is done with optical isolators.
Specyfikacja
• Connector:
Host: 1 x Mini USB 2.0 B female
Device: 1 x RS-422/485 Terminal Block 5 pin
• Data transfer rate up to 1 Mb/s
• 1 x DIP switch: RS-422/485 set operating mode
• LED indicators for status TX / RX
• 3 kV optical isolation
• ± 15 kV ESD protection for all signal pins
• Supports: RS-485 Echo Mode
• Power consumption: 54 mA / 270 mW
• Power supply via USB (Bus-Powered)
• Operating temperature: - 30° ~ 75° C
• Storage temperature: - 40° ~ 85° C
• Relative humidity: 5 ~ 95 % (not condensing)
• Housing: plastic
• Dimension (LxWxH): ca. 101 x 42 x 22 mm
Wymagania systemowe
• Windows XP/XP-64/Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-6410/10-64, Server
2012/2012R2/2016, Mac OS 10.5, Linux Kernel 2.6
• PC or notebook with one free USB port
Zawartość opakowania
• Converter
• USB 2.0 cable, length: ca. 1 m
• Mounting set for DIN rail
• Driver CD
• User manual
Numer artykułu 62501
EAN: 4043619625017
Kraj pochodzenia: Taiwan, Republic
of China
Opakowanie: • Box
Zdjęcia
General
Funkcja : Plug & Play
Mounting type: Montaż na szynie DIN 35 mm
Specyfikacja : RS-422 / RS-485 (EIA / TIA)
USB 2.0
Supported operating system: Linux Kernel 2.6 lub nowszy
Mac OS 10.14.1 lub nowszy
Windows 10 32-bit
Windows 10 64-bit
Windows 7 32-bit
Windows 7 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows Server 2012 R2
Windows Server 2012
Windows Server 2016
Wskaźnik LED: RX / TX
Protection: ESD (Electrostatic Discharge)
Galvanische Trennung
Interface
Złącze 1: 1 x USB 2.0 Type Mini-B female
Złącze 2: 1 x 5 Pin Terminalblock
Technical characteristics
Chipset: FTDI 232R
Szybkość transmisji danych: up to 921.6 Kbps
Temperatura robocza: -40 °C ~ 85 °C
Humidity: 5 ~ 95 %
Signal transmission: Tx+, Tx-, Rx+, Rx-, GND
Data transmission: asynchronous
Bi-directional
Half duplex
full duplex
differential
Napięcie: USB Bus powered (no additional power supply required)
Current consumption: < 100 mA
UART: USB to serial UART
Support: Modbus
RS-485 Echo Mode
Physical characteristics
Obudowa kolor: czarny
Materiał obudowy: Plastik
Wykończenie pinów: pozłacane
Długość: 101 mm
Width: 42 mm
Height: 22 mm
-
1
-
2
-
3
