LevelOne WBR-6022 Quick Installation Manual

LevelOne

WBR-6022

HomeGuard 22 Residential Router

Quick Installation Guide

English Português

Deutsch Svenska

Français Slovenščina

Español

繁體中文

Nederlands

한국어

Dansk Русский

Italiano Polski

Ελληνικά

2

Table of Contents

English .......................................................................................... 3

Deutsch ....................................................................................... 19

Français ...................................................................................... 35

Español ....................................................................................... 51

Nederlands .................................................................................. 67

Dansk .......................................................................................... 83

Italiano ......................................................................................... 99

Ελληνικά .................................................................................... 115

Português .................................................................................. 131

Svenska .................................................................................... 147

Slovenščina ............................................................................... 163

繁體中文 .................................................................................... 179

한국어........................................................................................ 195

Русский ..................................................................................... 211

Polski ......................................................................................... 227

Default Settings

IP Address 192.168.0.1

Username admin

Password password

Wireless Mode Enable

Wireless SSID LevelOne

Security None

This guide covers only the most common situations. All detailed

information is described in the user manual.

3

Installation

1.

Connect your ADSL/Cable modem’s internet line to

WBR-6022’s WAN port.

2. Connect LevelOne IP Cameras, FNS-1020v2 and your PC to

WBR-6022’s LAN ports.

3. Plug-in the Power Adapter.

English

WAN

LAN

Power

FNS-1020v2 IP Camera IP Camera

PC

ADSL/Cable Modem

* If you want to use WPS (WiFi Protected Setup) function for wireless

devices, please refer to page 57 on CD User Manual.

4

Check Your Network Settings

1. Please make sure your PC can get IP address automatically

so the WBR-6022 can communicate with your PC during

configuration.

 Select “Control Panel” > “Network Connections”.

 Right click the “Local Area Connection” and choose

“Properties”.

 Select the TCP/IP protocol for your network card.

 Click on the Properties button. You should then see the

following screen and make sure you have selected

“Obtain IP address automatically”

2. Reboot computer to make sure you have received the IP

address correctly form the Router.

1.

2.

3.

4.

5.

5

Easy Setup Wizard

Insert the CD into your CD-ROM drive of your computer.

6

Select Easy Setup Language.

The “Quick” wizard will guide you through the setup in few easy

steps. Details read Page.14 (chart 4) of User Manual.

1.

2.

7

Make sure that your hardware connections are all correct.

Adjust the Router’s time zone.

1.

2.

8

Setup the Power Management schedule.

Click to “enable” the Smart Schedule then click “next” to continue.

Set wireless enable or disable.

1.

2.

1.

9

Configure the wireless setting.

Auto detect Router’s WAN Service.

10

There are 2 examples for WAN service.

Example 1: Auto Detect WAN Setting “PPPoE” or “Dynamic IP”

Step1: Type in your PPPoE account.

Please check your PPPoE account from your ISP, then type in the

data.

Notice: If you use “Dynamic IP”, please ignore Step1.

1.

2.

11

Step 2: Confirm your settings.

Step 3: Save Settings.

12

Step 4: WAN Service Test.

Step 5: Setup Completed.

13

Example 2: if you using another WAN service, please click “Let me

select WAN service by myself”.

Please check your WAN service from your ISP, then type in the

data.

1.

2.

14

Setup HomeGuard

1. Open IE Browser, type in the IP address http://192.168.0.1

.

2. Default username and password is “admin” and

“password”.

1.

2.

1.

2.

15

3. Click “Search New Device”.

4. Model Name & Default username / password.

Model Name Username / Password

FCS-0010 / WCS-0010 “administrator” / *blank

FCS-0020 / WCS-0020 “administrator” / *blank

FCS-1030v2 / WCS-2030v2 “root” / *blank

FCS-1060 / WCS-2060 “root” / *blank

FCS-1081A / FCS-1101 “root” / **MAC address

FCS-1091 / WCS-1090 “administrator” / *blank

FCS-0030 / WCS-0030

“admin” / “admin”

*blank: leave the password by blank

**MAC address: Camera’s MAC in capital letters

16

5. “Register” will guide you through few steps to register your

camera(s) and NVR(s).

1. Open “Save as” and choose IPCam 1/2/etc.  2. Insert

Username & password  3. Open “Save as” and choose

NVR1/2/etc.  4. Click “Register”.

Adjust Home Guard’s Time Zone and Save.

1.

4.

3.

2.

1.

Step 2

Step 1

17

6. Set Level1DNS Domain Name.

Click “System”  “DDNS Alias”.

You can use a preferred name as Alias, then you can use new

Level1DNS name through the internet anywhere.

The format is “Alias name“.level1dns.net

1. Input Alias name  2. Test alias  3. Save/Modify alias.

2.

1.

3.

2.

Step 3

1.

18

7. View the camera’s live video.

Step 1: Click the IP Camera on the left list.

Step 2: Show the Camera live Video.

Details setup please read Page.22 (chart 4.2) of User Manual.

Notice: if you don’t see the video, please install the Active-X

plug-in for the IP Camera first.

1.

2.

19

Installation

1.

Verbinden Sie das Internetkabel Ihres ADSL/Kabel-Modem

mit dem WAN-Port des WBR-6022.

2. Verbinden Sie die LevelOne IP-Kamera(s), FNS-1020 und

den Computer mit den LAN-Ports des WBR-6022.

3. Schliessen Sie das Netzteil an.

Deutsch

WAN

LAN

Power

FNS-1020v2 IP-Kamera IP-Kamera

PC

ADSL/Kabel Modem

* Wenn Sie die WPS (WiFi Protected Setup) - Funktion für drahtlose Geräte

verwenden möchten, lesen Sie bitte auf Seite 60 des CD-Benutzerhandbuch

nach.

20

Prüfen Sie Ihre Netzwerk-Einstellungen

1. Bitte stellen Sie sicher, dass Ihr PC die IP-Adresse

automatisch empfangen kann, so dass der WBR-6022 mit

Ihrem PC während der Konfiguration kommunizieren kann.

 Wählen Sie “Control Panel” > “Network Connections”.

 Rechter Mausklick auf “Local Area Connection” und

wählen Sie bitte “Properties”.

 Wählen Sie “TCP/IP protocol” für Ihre Netzwerk-Karte.

 Klicken Sie auf die “Properties”-Taste. Sie sollten dann

den folgenden Bildschirm sehen. Stellen Sie bitte sicher,

dass Sie “Obtain IP address automatically” ausgewählt

haben.

2. Starten Sie Ihren Rechner neu, um sicherzustellen, dass Sie

die IP-Adresse vom Router korrekt empfangen haben.

1.

2.

3.

4.

5.

Strona jest ładowana ...

LevelOne WBR-6022 Quick Installation Manual

LevelOne WBR-6022 Quick Installation Manual

w innych językach

Powiązane dokumenty

Inne dokumenty