Auriol Z31743A Operation and Safety Notes

Kategoria
Stacje pogodowe
Typ
Operation and Safety Notes

Ten podręcznik jest również odpowiedni dla

TEMPERATURE STATION
TEMPERA TURSTA TION
Bedienungs- und Sicherheitshinweise
BEL- ÉS KÜLTÉRI HŐMÉRŐ
Kezelési és biztonsági utalások
ST ACJA METEO
Wskazówki dotyczące obsługi i bezpieczeństwa
TEMPERA TURNA POST AJA
Navodila za upravljanje in varnostna opozorila
IAN 91838
METEOSTANICE
Pokyny pro obsluhu a bezpečnostní pokyny
DIGITÁLNY TEPLOMER
Pokyny pre obsluhu a bezpečnostné pokyny
TEMPERATURE STATION
Operation and Safety Notes
91838_aur_Temperaturstation_cover_LB4_PL-HU-SI-CZ-SK.indd 2 30.08.13 08:34
GB Operation and Safety Notes Page 6
PL Wskazówki dotyczące
obsługi i bezpieczeństwa Strona 27
HU Kezelési és biztonsági utalások Oldal 50
SI Navodila za upravljanje
in varnostna opozorila Stran 71
CZ Pokyny pro obsluhu a
bezpečnostní pokyny Strana 93
SK Pokyny pre obsluhu a
bezpečnostné pokyny Strana 113
DE / AT / CH Bedienungs- und
Sicherheitshinweise Seite 133
91838_aur_Temperaturstation_cover_LB4_PL-HU-SI-CZ-SK.indd 3 30.08.13 08:34
3
A
1
2
3
4
5
7
8
9
10
12
11
13
14
15
17
16
6
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 3 30.08.13 08:34
4
B
18
x 1
20
19
21
22
C
x 1
x 1
23
24
25
2627
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 4 30.08.13 08:34
5
D
x 1
28
E
x 1x 1
29
30
3132
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 5 30.08.13 08:34
6 GB
Proper use .................................................Page 7
Description of parts
and features .............................................Page 7
Technical data .........................................Page 8
Safety
General safety information ............................Page 9
Safety instructions for batteries ......................Page 11
Before initial use
General information .......................................Page 13
Preparing to use the outdoor sensor .............Page 14
Preparing the weather station for use ...........Page 14
Weather station ..............................................Page 16
External sensor ................................................Page 16
Setting the language / time zone / time /
date manually .................................................Page 17
Displaying summer time .................................Page 18
Calling up the time zone ................................Page 19
Setting the alarm time .....................................Page 19
Calling up the alarm times .............................Page 20
Switching the alarm on / off ...........................Page 20
Using the snooze button ................................Page 20
Displaying temperature ..................................Page 21
Calling up the minimum / maximum values ....Page 21
Displaying temperature trends .......................Page 22
Battery state display .......................................Page 22
Replacing the batteries ...................................Page 22
Troubleshooting....................................Page 23
Cleaning and maintenance .........Page 24
Disposal ........................................................Page 24
Declaration of conformity............Page 25
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 6 30.08.13 08:34
7 GB
Temperature station
Proper use
The weather station displays the indoor and out-
door temperatures in Celsius (°C) or Fahrenheit
(°F) and their maximum and minimum values. The
weather station also displays the time in 12 / 24-
hour clock modes and the date. In addition, the
weather station has an alarm function. The device
is not intended for commercial use.
Description of parts
and features
LC display
1
Temperature trend (outdoor temperature)
2
Outdoor temperature
3
symbol (outdoor sensor)
4
MAX- / MIN display for indoor temperature
5
Temperature trend (indoor temperature)
6
Indoor temperature
7
symbol (weather station)
8
Time
9
Z
Z
symbol (snooze function)
10
Seconds display
11
symbol
12
Day of the week display
13
Date display (day / month)
14
DST display (summer time)
15
/ symbol (Alarm 1 / Alarm 2)
16
2
nd
time zone (ZONE)
17
MAX- / MIN display (outdoor temperature)
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 7 30.08.13 08:34
8 GB
Weather station
18
Z
Z
/ REGISTER button (snooze function /
REGISTER)
19
SELECT button
20
SET / RESET button
21
ALARM button
22
CLOCK button
23
Hanging slot
24
Battery compartment
25
Stand
26
Screw (ø 2.5 mm)
27
Dowel (ø 6 mm)
Outdoor sensor
28
Control LED
29
Hanging slot
30
Battery compartment
31
Screw (ø 2.5 mm)
32
Dowel (ø 6 mm)
Technical data
Weather station:
Temperature
measurement range: 0 – + 50 °C
+32 – +122 °F
Note: If the temperature is ≤0 °C (32 °F), the
LC display shows “LL.L”. If the temperature is
≥50 °C (122 °F), the LC display shows “HH.H”.
Temperature interval: 0.1 °C
Radio signal: DCF
Batteries: 2 x AA 1.
5 V
(included)
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 8 30.08.13 08:34
9 GB
Outdoor sensor:
Temperature
measurement range: –20 °C – +60 °C
–4 °F – +140 °F
Note: If the temperature is ≤–20 °C (–4 °F),
the LC display shows “LL.L”. If the temperature is
≥60 °C (140 °F), the LC display shows “HH.H”.
HF transmission signal: 433 MHz
HF transmission range: max. 30 metres
(in open area)
Batteries: 2 x AA 1.
5 V
(included)
Safety
YOU SHOULD STORE ALL SAFETY
INFORMATION AND INSTRUC-
TIONS IN A SAFE PLACE IN
CASE
YOU NEED TO REFER TO
THEM AGAIN IN THE FUTURE!
General safety
information
This appliance can be used by
children aged from 8 years and
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 9 30.08.13 08:34
10 GB
above and persons with reduced
physical, sensory or mental ca-
pabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
Do not expose the device to an
extremely high electromagnetic
field. This may impair the correct
functioning of the device.
Please note that the guarantee
does not cover damage caused
by incorrect handling, non-com-
pliance with the operating in-
structions or interference with
the device by unauthorised in-
dividuals.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 10 30.08.13 08:34
11 GB
Safety instructions
for batteries
DANGER TO
LIFE! Batteries can be swal-
lowed, which may represent a
danger to life. If a battery has
been swallowed, medical help
is required immediately.
Remove the batteries from the
device if they are not going to
be used for a prolonged period.
CAUTION! DANGER
OF EXPLOSION!
Never recharge batteries which
are not rechargeable.
When inserting the batteries, en-
sure the correct polarity! This is
shown in the battery compart-
ments.
Remove spent batteries immedi-
ately from the device. There is
an increased danger of leaks!
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 11 30.08.13 08:34
12 GB
Keep batteries away from chil-
dren do not throw the batteries
in the fire, short-circuit them or
take them apart.
Always replace all the batteries
at once.
Use batteries of the same type
only. Otherwise there is a risk
of an explosion.
If the batteries have leaked inside
your device, you should remove
them immediately in order to
prevent damage to the device!
Avoid contact with the skin, eyes
and mucous membranes. Any
parts of the body coming into
contact with battery acid should
be rinsed off with copious am-
ounts of water and / or a doctor
contacted if necessary!
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 12 30.08.13 08:34
13 GB
Before initial use
Put the batteries first into the outdoor
sensor, then into the weather station.
General information
CAUTION! When choosing
where to position
the weather station,
make sure that it is not exposed
to direct sunlight, vibrations, dust, heat, cold or
moisture. Do not place the weather station or exter-
nal sensor near to heat sources, e.g. radiators, as
this may result in damage to the instruments.
Place the weather station on the accompany-
ing stand
25
.
Please ensure that neighbouring devices are
not operated at the same frequency of
433 MHz. Such devices may cause interfer-
ence to the radio connection.
Do not place the devices next to or on metal
plates. Otherwise the quality of radio wave
transmission may be reduced.
Radio signal (DCF):
The DCF signal (time signal transmitter) is made
up of time pulses transmitted from one of the high-
est precision clocks in the world close to Frankfurt /
Main in Germany – it varies by 1 second in 1mil-
lion years.
In ideal conditions, your weather station can pick
up this signal over a distance of up to approx.
1,500 km around Frankfurt / Main.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 13 30.08.13 08:34
14 GB
Preparing to use
the outdoor sensor
Inserting the batteries:
Remove the battery compartment cover from
the back of the outdoor sensor.
Insert two 1.
5 V
batteries (AA) (included)
into the battery compartment
30
.
Note: Make sure you fit the batteries the
right way round (polarity). This is shown in the
battery compartment (see. fig E).
The outdoor sensor is now ready for use and
the control LED
28
illuminates briefly.
Close the battery compartment cover.
If this does not work, carry out a restart, if
necessary. To do this, press and keep pressed
the Z
Z
/ REGISTER button
18
.
Preparing the weather
station for use
Inserting the batteries:
Open the battery compartment
24
on the
back of the weather station.
Insert two 1.
5 V
batteries (AA) (included)
into the battery compartment.
Note: Make sure you fit the batteries the
right way round (polarity). This is shown on
the battery compartment (see. fig E).
Close the battery compartment cover.
Connecting the weather station with the
outdoor sensor and the DCF radio signal:
After the batteries have been inserted, the
weather station attempts to establish a connection
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 14 30.08.13 08:34
15 GB
with the outdoor sensor. This process can take a
few minutes. The
symbol flashes. Once the de-
vice has successfully connected to the external
sensor, the
symbol stops flashing and the tem-
perature is shown in the LC display.
Note: If the weather station does not receive the
signal from the outdoor sensor within 3 minutes,
the weather station automatically starts with the
reception of the radio time signal.
After successful reception of the outdoor sensor
signal or after 3 minutes, the weather station starts
with the reception of the radio time signal. This
process can take up to 5 minutes and is indicated
in the LC display by the flashing
symbol
11
.
After successful reception of the DCF radio signal,
the
symbol is displayed continuously in the
LC display.
Note: Do not move the weather station while it is
receiving the signal. Otherwise this could interfere
with reception.If synchronisation is not possible
when the weather station is being first set up, try
changing the location (e.g. place the weather sta-
tion near to a window).
Reception may be considerably reduced by obstruc-
tions (e.g. concrete walls) or sources of interference
(e.g. other electrical devices).
If the reception of the radio signal continues to be
interrupted, you can set the time and date manu-
ally (see “Setting the language / time zone / time /
date manually”).
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 15 30.08.13 08:34
16 GB
Mounting the weather station and / or
the outdoor sensor on a wall:
Note: You will require an electric drill and a
crosshead screwdriver for this step.
CAUTION! DANGER TO LIFE, RISK OF
INJURY AND MATERIAL DAMAGE! Read
the operating and safety instructions for your drill
carefully.
DANGER TO LIFE! Take care
that you do not hit electricity, gas or water lines
when you drill into the wall. If necessary, check
with a pipe and cable detector before drilling.
Weather station
Mark the position of the hole (ø approx. 6 mm)
on the wall.
Drill the hole with an electric drill.
Insert the dowel
27
into the drilled hole.
Using a crosshead screwdriver, screw the
screw
26
into the dowel.
Hang the weather station by placing the
hanger
23
on the screw.
External sensor
Mark the position of the hole (ø approx. 6 mm)
on the wall.
Drill the hole with an electric drill.
Insert the dowel
32
into the drilled hole.
Using a crosshead screwdriver, screw the
screw
31
into the dowel.
Hang the external sensor by placing the
hanger
29
on the screw.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 16 30.08.13 08:34
17 GB
Note: Ensure that the external sensor does not
come into contact with water or direct sunlight.
Electronic devices may adversely affect the wire-
less signal reception.
Setting the language / time
zone / time / date manually
The reception of DCF radio signal where the
weather station has been positioned may become
degraded or interrupted. If this happens you can
set the device manually.
 1. Press and hold down the CLOCK button
22
for about 3 seconds.
 2. Press the SET / RESET button
20
to switch be-
tween the 12- and 24-hour clock display modes.
 3. Press the CLOCK button to confirm your set-
tings. The day of the week display
12
flashes.
Tip: If you press and hold down the SET /
RESET button, you accelerate the process and
reach the desired value more quickly. This
quicker method can also be used for making
the following settings. If during a period of
30seconds no buttons are pressed, the LC
display returns automatically to the default
display.
 4. Press the SET / RESET button to set the desired
language (GE = German, FR = French,
SP = Spanish, IT = Italian, EN = English).
 5. Press the CLOCK button to confirm your set-
tings. The time zone display flashes.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 17 30.08.13 08:34
18 GB
 6. Press the SET / RESET button to set the desired
time zone for time zone 2 (–12 hours to
+12hours).
Note: Should you be in a country in which
the DCF signal can be received but the time
is different to your current local time, you can
use the time zone setting to have the clock
display your current local time. If you find
yourself in a country in which, for example,
the local time is an hour ahead of Central
European Time (CET), you set the time zone
to +01. The clock is now still controlled by
DCF but shows the time as one hour ahead
of CET. If you wish to know what the time is in
the USA for example, then simply by setting
the time zone value to e.g. –10 you will ob-
tain the current local time in Los Angeles etc.
 7. Press the CLOCK button to confirm your settings.
The hour display flashes.
 8. Press the SET / RESET button to set the desired
value.
 9. Press the CLOCK button to confirm your settings.
10. Repeat steps 6 and 7 to set the values for,
minutes, seconds
10
, year and date
13
(day /
month).
Note: The seconds display can only be
reset to 00.
11. After this, the LC display returns to the default
display.
Displaying summer time
Summer time is indicated by the DST symbol
14
in the LC display. The weather station
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 18 30.08.13 08:34
19 GB
automatically detects from the DCF radio signal
whether it is summer time or not.
Calling up the time zone
The default display shows the time zone according
to the information provided by the DCF signal.
Press the CLOCK button
22
. The time zone
16
appears in the LC display.
Press the CLOCK button again to return to the
default display.
Setting the alarm time
You can set two different alarm times.
 1. Press and hold down the ALARM button
21
for about 3 seconds.
Note: If an alarm time has been set before,
then that previously set alarm time appears in
the LC display. If not, then the display shows
0:00 or AM 12:00.
 2. The hour display flashes. Press the SET /
RESET button
20
to set the desired value.
 3. Press the ALARM button to confirm your
settings. The minute display flashes.
 4. Press the SET / RESET button to set the desired
value.
 5. Press the ALARM button to confirm your
settings.
 6. Repeat steps 2 to 5 to set the time for Alarm 2.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 19 30.08.13 08:34
20 GB
Calling up the alarm times
Press ALARM button
21
once or twice to
call up the set time for Alarm 1 or Alarm 2
respectively.
Press the ALARM button again to return to the
default display.
Switching the alarm on / off
Press the SET / RESET button
20
once to acti-
vate Alarm 1. Press the SET / RESET button
twice to activate Alarm 2. Press the SET /
RESET button three times to activate Alarm1
and Alarm 2.
Note: The symbol
or appears in the
LC display.
The alarm signal sounds as soon as the set
alarm time is reached. The alarm signal ceases
automatically after a period of 2minutes.
Press the ALARM button
21
to switch off the
alarm signal before it switches off automati-
cally.
Note: The alarm signal sounds every day at
the set time.
Press the SET / RESET button three times to
deactivate Alarm 1. Press the SET / RESET
button twice to deactivate Alarm 2. Press the
SET / RESET button once to deactivate Alarm
1 and Alarm 2.
Using the snooze button
Press the Z
Z
/ REGISTER button
18
while the
alarm signal is sounding to activate the snooze
function.
91838_aur_Temperaturstation_content_LB4_PL-HU-SI-CZ-SK.indd 20 30.08.13 08:34
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154

Auriol Z31743A Operation and Safety Notes

Kategoria
Stacje pogodowe
Typ
Operation and Safety Notes
Ten podręcznik jest również odpowiedni dla

w innych językach