Yamaha MU100 Instrukcja obsługi

TONE GENERATOR

OWNER'S MANUAL

BEDIENUNGSANLEITUNG

MODE D'EMPLOI

FCC INFORMATION (U.S.A)

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B”

digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a

residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio

frequencies and, if not installed and used according to the instructions found in the user’s manual, may cause interference harmful to

the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all

installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”,

please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in

to co-axial type cable.

If these corrective measures do not produce satisfactory results, please contact the your local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division,

6600 Orangethorpe Ave, Buena Park, CA 90620

*

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

NEDERLAND / THE NETHERLANDS

• Dit apparaat bevat een lithium batterij voor geheugen back-up.

• This apparatus contains a lithium battery for memory back-up.

• Raadpleeg uw leverancier over de verwijdering van de batterij

op het moment dat u het apparaat ann het einde van de

levensduur afdankt of de volgende Yamaha Service Afdeiing:

Yamaha Music Nederland Service Afdeiing

Kanaalweg 18-G, 3526 KL UTRECHT

Tel. 030-2828425

• For the removal of the battery at the moment of the disposal at

the end of the service life please consult your retailer or Yamaha

Service Center as follows:

Yamaha Music Nederland Service Center

Address: Kanaalweg 18-G, 3526 KL UTRECHT

Tel : 030-2828425

• Gooi de batterij niet weg, maar lever hem in als KCA.

• Do not throw away the battery. Instead, hand it in as small

chemical waste.

ADVARSEL!

Lithiumbatteri—Eksplosionsfare ved fejlagtig håndtering.

Udskiftning må kun ske med batteri af samme fabrikat og

type. Levér det brugte batteri tilbage til leverandoren.

VARNING

Explosionsfara vid felaktigt batteribyte. Använd samma

batterityp eller en ekvivalent typ som rekommenderas av

apparattillverkaren. Kassera använt batteri enligt fabrikantens

instruktion.

VAROITUS

Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda

paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin.

Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.

• This applies only to products distributed by Yamaha Canada Music Ltd.

• Ceci ne s’applique qu’aux produits distribués par Yamaha Canada Musique Ltée.

CANADA

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power

supply or adapter other than one described in the manual, on

the name plate, or specifically recommended by Yamaha.

WARNING: Do not place this product in a position where

anyone could walk on, trip over ,or roll anything over power

or connecting cords of any kind. The use of an extension cord

is not recommended! IF you must use an extension cord, the

minimum wire size for a 25' cord (or less ) is 18 AWG. NOTE:

The smaller the AWG number ,the larger the current handling

capacity. For longer extension cords, consult a local electri-

cian.

This product should be used only with the components

supplied or; a cart, rack, or stand that is recommended by

Yamaha. If a cart, etc., is used, please observe all safety

markings and instructions that accompany the accessory

product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be

correct at the time of printing. However, Yamaha reserves

the right to change or modify any of the specifications

without notice or obligation to update existing units.

This product, either alone or in combination with an ampli-

fier and headphones or speaker/s, may be capable of produc-

ing sound levels that could cause permanent hearing loss.

DO NOT operate for long periods of time at a high volume

level or at a level that is uncomfortable. If you experience

any hearing loss or ringing in the ears, you should consult an

audiologist.

IMPORTANT: The louder the sound, the shorter the time

period before damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or

as optional accessories. Some of these items are designed to

be dealer assembled or installed. Please make sure that

benches are stable and any optional fixtures (where applica-

ble) are well secured BEFORE using.

Benches supplied by Yamaha are designed for seating only.

No other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating

to how a function or effect works (when the unit is operating

as designed) are not covered by the manufacturer’s war-

ranty, and are therefore the owners responsibility. Please

study this manual carefully and consult your dealer before

requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe

and environmentally friendly. We sincerely believe that our

products and the production methods used to produce them,

meet these goals. In keeping with both the letter and the

spirit of the law, we want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery

which (if applicable) is soldered in place. The average life

span of this type of battery is approximately five years.

When replacement becomes necessary, contact a qualified

service representative to perform the replacement.

This product may also use “household” type batteries. Some

of these may be rechargeable. Make sure that the battery

being charged is a rechargeable type and that the charger is

intended for the battery being charged.

When installing batteries, do not mix batteries with new, or

with batteries of a different type. Batteries MUST be in-

stalled correctly. Mismatches or incorrect installation may

result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery.

Keep all batteries away from children. Dispose of used

batteries promptly and as regulated by the laws in your area.

Note: Check with any retailer of household type batteries in

your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for

some reason its useful life is considered to be at an end,

please observe all local, state, and federal regulations that

relate to the disposal of products that contain lead, batteries,

plastics, etc. If your dealer is unable to assist you, please

contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the rear of the product. The

model number, serial number, power requirements, etc., are

located on this plate. You should record the model number,

serial number, and the date of purchase in the spaces pro-

vided below and retain this manual as a permanent record of

your purchase.

Model

Serial No.

Purchase Date

SPECIAL MESSAGE SECTION

PLEASE KEEP THIS MANUAL

92-BP

TONE GENERATOR

OWNER'S MANUAL

BEDIENUNGSANLEITUNG

MODE D'EMPLOI

FRANÇAIS

DEUTSCH

ENGLISH

Welcome to the MU100

6

How to Use This Manual

Welcome to the MU100

Congratulations and thank you for purchasing the Yamaha MU100 Tone

Generator!

The MU100 is an advanced tone generator providing an amazing total of

1313 high-quality Voices, full General MIDI compatibility — including

Yamaha’s XG — plus flexible computer interfacing in a compact, easy-

to-use half-rack unit.

With the convenient built-in host computer interface and MIDI termi-

nals, the MU100 is ideal for any computer music system — from connec-

tion to a simple laptop to integration in a complete MIDI studio. With its

large LCD and the intuitive graphic controls on the display, the MU100 is

remarkably easy to use.

The MU100 also features completely independent dual MIDI inputs, 32

Part multi-timbral capacity and full 64-note polyphony for playback of

even the most sophisticated song data. A special Performance mode

gives you flexible four-Voice operation, for live performance applications.

Also built into the system are six digital multi-effects and two EQ sec-

tions (one per-part, and one overall), which give you enormous versatility

in “sweetening” the sound. What’s more, the MU100 provides a host of

comprehensive, yet easy-to-use editing tools for getting just the sound you

need.

The MU100 has a convenient A/D input that allows you to connect a mi-

crophone, electric guitar or other instrument, and mix those signals with

the MU100’s Voices. A plug-in connector is also built into the MU100 for

easy integration with the XG Plug-in System.

* Company names and product names in this Owner’s Manual are the trade-

marks or registered trademarks of their respective companies and are

hereby acknowledged.

Unpacking

How to Use This Manual

7

MU100 Serial No.:

PA-5B AC Power Adaptor*

Owner’s Manual

CD-ROM “XGtools”

Unpacking

Your MU100 package should include the items listed below. Make sure that

you have them all. Also, write down the serial number of your MU100 in the

box below, for future reference.

GM System Level 1

“GM System Level 1” is a standard specification that defines the arrange-

ment of voices in a tone generator and its MIDI functionality, ensuring

that data can be played back with substantially the same sounds on any

GM-compatible tone generator, regardless of its manufacturer or model.

Tone generators and song data that meet the “GM System Level 1” bear

this GM logo.

XG

“XG” is a tone generator format that expands the voice arrangement of the

“GM System Level 1” specification to meet the ever-increasing demands

of today’s computer peripheral environment, providing richer expressive

power while maintaining upward compatibility of data. “XG” greatly ex-

pands “GM System Level 1” by defining the ways in which voices are ex-

panded or edited and the structure and type of effects.

When commercially available song data bearing the XG logo is played

back on a tone generator which bears the XG logo, you will enjoy a full

musical experience that includes unlimited expansion voices and effect

functions.

About the XG Plug-in System

This system offers powerful expansion and upgrade capabilities for XG-

Plug-in-compatible tone generators.

The XG Plug-in System enables you to equip the tone generator with the

latest and most sophisticated technology, ensuring that you keep pace with

the rapid and multi-faceted advance in modern music production.

* Power supply recommendation may vary from country to country.

Please check with your nearest Yamaha dealer for further details.

8

Table of Contents

TABLE OF CONTENTS

Table of Contents

Welcome to the MU100.......................................................................................................... 6

Unpacking ............................................................................................................................... 7

Table of Contents ................................................................................................................... 8

How to Use This Manual ..................................................................................................... 12

PRECAUTIONS................................................................................................................... 13

The Controls of the MU100 ................................................................................................ 15

Front Panel.................................................................................................................. 15

Rear Panel................................................................................................................... 18

The MU100 — What It Is and What It Can Do ............................................................... 19

What It Is... ..................................................................................................................... 19

About General MIDI .................................................................................................. 19

About XG-format ....................................................................................................... 20

What It Can Do... ........................................................................................................... 20

Using With a MIDI Keyboard .................................................................................... 20

Using with the XG Plug-in System ............................................................................ 21

Using With a Computer or Sequencer........................................................................ 21

About the Modes of the MU100 .................................................................................... 22

Play Modes and the Part Controls .............................................................................. 23

Part Edit Mode............................................................................................................ 23

Utility Mode ............................................................................................................... 23

Modes and Function Tree.................................................................................................... 24

GUIDED TOUR

Setting Up Your MU100................................................................................................. 28

What You'll Need........................................................................................................ 28

Making the Connections............................................................................................. 28

Powering Up.................................................................................................................... 30

Playing the Demo Song .................................................................................................. 31

Setting Up the MU100 in Your Music System ............................................................. 33

Connecting to MIDI Devices ..................................................................................... 33

Connecting Directly to a Computer ........................................................................... 35

Macintosh and Compatibles ................................................................................. 35

IBM PC/AT and Compatibles ............................................................................... 37

Selecting and Playing the Performances...................................................................... 39

Calling Up the Performance Play Mode and Playing the Performances................... 39

Selecting and Playing Individual Voices ...................................................................... 42

Calling Up the XG Mode ........................................................................................... 42

Selecting Voice Banks and Voices From the Panel .................................................... 43

Selecting Voices From a MIDI Keyboard .................................................................. 47

Editing in the Multi Mode ............................................................................................. 48

Single Part Controls.................................................................................................... 49

Changing the Volume and Pan settings of a Part.................................................. 50

On Your Own... ............................................................................................... 51

Table of Contents

9

TABLE OF CONTENTS

Edit Menu Parameters ................................................................................................ 52

Changing the Filter and EG Settings of a Part ..................................................... 52

On Your Own... ............................................................................................... 54

Editing Drum Voices — with the Drum Setup Controls............................................ 55

Making Changes to Individual Drum Sounds — the "Drum" Parameters .......... 56

On Your Own... ............................................................................................... 58

Editing in the Performance Mode ................................................................................ 59

All Part Controls......................................................................................................... 60

Transposing the Overall Key of a Performance......................................................... 61

Single Part Controls — Selecting Different Voices for the Performance.................. 62

On Your Own... ............................................................................................... 63

Edit Menu Parameters — Creating a Two-Voice Layer ............................................ 64

Setting Up a Keyboard Split....................................................................................... 66

On Your Own... ............................................................................................... 67

Using the Assignable Controller in a Performance.................................................... 67

Saving Your Original Performance ............................................................................ 68

Assignable Controller (AC1) ......................................................................................... 69

Controllers and Control Numbers .............................................................................. 69

Control Numbers and the Actual Sound..................................................................... 70

Assigning the Assignable Controller.......................................................................... 71

Using the Assignable Controller — Setting Up ......................................................... 72

Using the Assignable Controller — Some Applications............................................ 73

Changing the Brightness on a Piano Voice........................................................... 73

Experssive Volume Control of a Part ................................................................... 75

Expressive Control of Individual Drum Sounds .................................................. 75

On Your Own... ............................................................................................... 77

Effects .............................................................................................................................. 78

Using Reverb and Chorus........................................................................................... 78

Applying Distortion to a Part — Using the Variation Effects ................................... 80

Equalizer (EQ)................................................................................................................ 82

Adjusting the Tone of a Specific Part — Part EQ...................................................... 82

Adjusting the Overall Tone — Multi EQ ................................................................... 84

Mute/Solo ........................................................................................................................ 85

Using Mute/Solo......................................................................................................... 85

A/D Input ........................................................................................................................ 87

Using the A/D Input ................................................................................................... 87

Data Flow Block Diagram ............................................................................................. 91

MIDI/Computer Connecting Cables ............................................................................ 92

REFERENCE

Multi Mode...................................................................................................................... 95

Part Controls ............................................................................................................... 95

Single Part Control................................................................................................ 96

All Part Control..................................................................................................... 98

10

Table of Contents

TABLE OF CONTENTS

Multi Edit Mode ....................................................................................................... 100

Filter .................................................................................................................... 100

Envelope Generator (EG) ................................................................................... 102

Equalizer (EQ) .................................................................................................... 105

Vibrato................................................................................................................. 106

Others .................................................................................................................. 107

Drum Setup Controls .......................................................................................... 114

Performance Mode ....................................................................................................... 119

Performance Part Control ......................................................................................... 120

All Part ................................................................................................................ 120

Single Part ........................................................................................................... 121

Performance Edit Mode............................................................................................ 123

Common.............................................................................................................. 123

Part ...................................................................................................................... 126

Copy and Store Operations ...................................................................................... 129

Copy .................................................................................................................... 129

Store .................................................................................................................... 130

Recall Function ................................................................................................... 132

Effect Edit Mode .......................................................................................................... 133

Reverb (REV) ........................................................................................................... 134

Chorus (CHO)........................................................................................................... 135

Variation (VAR) ........................................................................................................ 136

Insertion 1, 2 (INS 1, 2)............................................................................................ 138

About the Effect Connections — System and Insertion .......................................... 139

Equalizer (Multi EQ) Edit........................................................................................... 142

Utility Mode .................................................................................................................. 143

System Functions (SYSTEM) .................................................................................. 144

Dump Out Functions (DUMPOUT)......................................................................... 148

Saving and Restoring Data via MIDI ................................................................. 148

Saving and Restoring Data via TO HOST.......................................................... 148

Initialize Functions (INITIAL)................................................................................. 152

Demo Song Play (DEMO) ....................................................................................... 155

Sound Module Mode (MODE).................................................................................... 156

Miscellaneous Functions.............................................................................................. 157

Show Control Change .............................................................................................. 157

Show Exclusive ........................................................................................................ 159

Table of Contents

11

TABLE OF CONTENTS

APPENDIX

Installing the Optional XG Plug-in System ............................................................... 163

Introducing the XG Plug-in System ......................................................................... 163

Plug-in versatility like never before ................................................................... 163

XG Plug-in System Integration .......................................................................... 164

The Boards of the XG Plug-in System ............................................................... 164

Introducing the XGworks Plug-in System ......................................................... 165

Installation ................................................................................................................ 166

Prior to Installation ............................................................................................. 166

Basic Information.......................................................................................... 166

Backing Up Data ........................................................................................... 166

The Performance Mode................................................................................. 166

Installing a Plug-in Board into the MU100 ........................................................ 167

Troubleshooting ............................................................................................................ 170

Error Messages ............................................................................................................. 171

Specifications ................................................................................................................ 173

Glossary......................................................................................................................... 175

Index .............................................................................................................................. 177

12

How to Use This Manual

You are probably eager to try out your new MU100 Tone Generator right

away and hear what it can do, rather than have to read through a lot of in-

structions before you can even get a sound out of it.

The structure of the manual is very straightforward. You can approach it in

a linear manner, reading through from beginning to end, or on an “on-de-

mand” basis, going directly to the information you need as you need it.

However, to get the most out of your MU100, we strongly suggest that you

read the following sections in the order given:

1) Precautions

This gives you important information on how to care for your new

MU100, how to avoid damaging it, and how to ensure long-term, reli-

able operation.

2) The MU100 — What It Is and What It Can Do

This briefly provides an overview of the functions and features of the

MU100 and offers some important hints on how you can use it effec-

tively. It also provides convenient page references so that you can eas-

ily find out about features and functions of interest.

3) The Controls of the MU100

This section introduces you to the panel controls and connectors.

4) Guided Tour

This is perhaps the most important and valuable section of the manual.

It gets you started using your new MU100, helping you set up the in-

strument and play it — and it introduces you to virtually all of the im-

portant functions and features. The hands-on experience you gain in

this section will help you quickly master the instrument and aid you in

navigating the more detailed sections of the manual.

5) Setting Up the MU100 in Your Music System;

Using the MU100 with a Computer or Sequencer

These sections (within the Tutorial) provide all you need to know to effec-

tively integrate the MU100 into your present computer music system.

6) Reference

Once you’re familiar with everything above, lightly go over this com-

prehensive guide to all editing functions. You won’t need (or want) to

read everything at once, but it is there for you to refer to when you

need information about a certain feature or function.

7) Appendix

Use the sections in the Appendix as necessary. For example, the Index

will come in handy when you need to quickly find information on a

specific topic. Other sections, such as the Glossary, Troubleshooting,

Installing the optional XG Plug-in System and Error Messages pro-

vide additional useful information.

8) Sound List & MIDI Data booklet

This separate booklet features lists of the Performances, Voices, drum

sounds, effect types and parameters, as well as details on all relevant

MIDI messages and data.

PRECAUTIONS

13

• Do not operate the instrument for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

■REPLACING THE BACKUP BATTERY

• This instrument contains a non rechargeable internal backup battery

which permits internal data to remain stored even when the power is off.

When the backup battery needs replacing, the message "Battery Low!"

will display in the display. When this happens, immediately back up

your data (using an external device such as the floppy disk-based

Yamaha MIDI Data Filer MDF3), then have qualified Yamaha service

personnel replace the backup battery.

• Do not attempt to replace the backup battery yourself, in order to prevent

the possible serious hazards. Always have qualified Yamaha service

personnel replace the backup battery.

• Never place the backup battery in a location that a child can reach, since

a child might accidentally swallow the battery. If this should happen,

consult a physician immediately.

■SAVING USER DATA

• Save all data to an external device such as the Yamaha MIDI Data Filer

MDF3, in order to help prevent the loss of important data due to a

malfunction or user operating error.

Yamaha cannot be held responsible for damage caused by improper

use or modifications to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep these precautions in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not open the instrument or attempt to disassemble the internal parts

or modify them in any way. The instrument contains no user-serviceable

parts. If it should appear to be malfunctioning, discontinue use

immediately and have it inspected by qualified Yamaha service

personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might

spill into any openings.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is

a sudden loss of sound during use of the instrument, or if any unusual

smells or smoke should appear to be caused by it, immediately turn off

the power switch, disconnect the adaptor plug from the outlet, and have

the instrument inspected by qualified Yamaha service personnel.

• Use the specified adaptor (PA-5B or an equivalent recommended by

Yamaha) only. Using the wrong adaptor can result in damage to the

instrument or overheating.

• Before cleaning the instrument, always remove the electric plug from

the outlet. Never insert or remove an electric plug with wet hands.

• Check the electric plug periodically and remove any dirt or dust which

may have accumulated on it.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not place the AC adaptor cord near heat sources such as heaters or

radiators, and do not excessively bend or otherwise damage the cord,

place heavy objects on it, or place it in a position where anyone could

walk on, trip over, or roll anything over it.

• When removing the electric plug from the instrument or an outlet, always

hold the plug itself and not the cord.

• Do not connect the instrument to an electrical outlet using a multiple-

connector. Doing so can result in lower sound quality, or possibly cause

overheating in the outlet.

• Unplug the AC power adaptor when not using the instrument, or during

electrical storms.

• Before connecting the instrument to other electronic components, turn

off the power for all components. Before turning the power on or off for

all components, set all volume levels to minimum.

• Do not expose the instrument to excessive dust or vibrations, or extreme

cold or heat (such as in direct sunlight, near a heater, or in a car during

the day) to prevent the possibility of panel disfiguration or damage to

the internal components.

• Do not use the instrument near other electrical products such as

televisions, radios, or speakers, since this might cause interference which

can affect proper operation of the other products.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Before moving the instrument, remove all connected adaptor and other

cables.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint

thinners, solvents, cleaning fluids, or chemical-impregnated wiping

cloths. Also, do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument,

and do not use excessive force on the buttons, switches or connectors.

The Controls of the MU90R

15

The Controls of the MU100

Front Panel

1 A/D INPUT

For connection of a microphone, electric guitar or other electronic instruments

(stereo 1/4” plug).

2 A/D INPUT level control

For control of the level of the A/D input.

3 PHONES jack

For connection to a set of stereo headphones (Stereo Mini-pin).

4 POWER/VOL control

Controls the power off/on functions as well as adjusts the overall volume of

the MU100.

1

34

2

16

The Controls of the MU90R

The Controls of the MU100

5 PLAY button

For entering the Play mode and switching among the different Play displays.

(See page 40.)

6 EDIT button

For entering the Edit mode. (See page 52.)

7 UTIL (UTILITY) button

For entering the Utility mode. (See page 31.)

8 MODE button

For entering the Sound Module mode. (See page 39.)

9 EFFECT button

For entering the Effect Edit mode. (See page 79.)

: EQ button

For entering the EQ Edit mode. (See page 84.)

A MUTE/SOLO button

Pressing this alternately mutes or solos the selected Part. (See page 85.)

B ENTER button

For calling up menu items in the display and for executing certain functions

and operations. Double-clicking this (pressing it twice quickly) calls up the

Show Exclusive function. (see page 159.)

C EXIT button

For leaving various display pages and returning to previous displays. Also for

canceling certain functions and operations.

7

8

9

0

B

C

56 A

D

E

F

The Controls of the MU90R

17

The Controls of the MU100

D PART -/+ buttons

For selecting different Parts. In the Effect Edit mode, these can be used to

switch among the different effects. Pressing these together alternately switches

between All Part and Single Part control. (See page 40.)

E SELECT </> buttons

For selecting the various menu items, parameters and controls on the display.

F VALUE -/+ buttons

For changing the value of a selected parameter or control.

Hint

You can rapidly move through the values by holding down one of the [VALUE

-

/

+

]

buttons. You can move even more rapidly by holding down one button and then press-

ing and holding down the other. For example, to rapidly advance (increase) the value,

hold down the [VALUE

+

] button and simultaneously press and hold down the [VALUE

-

] button.

18

The Controls of the MU90R

The Controls of the MU100

Rear Panel

1 MIDI THRU, MIDI OUT and MIDI IN A/B terminals

For connection to other MIDI devices, such as a MIDI keyboard, tone genera-

tor, sequencer, or to a computer that has a MIDI interface. MIDI IN A and B are

independent MIDI ports, allowing full 32-channel MIDI input. MIDI OUT is

for data dumps to another MIDI device, while MIDI THRU is for “daisy-chain”

connection of additional MU100s or other MIDI instruments. (See page 33 for

more information on MIDI connections.)

2 HOST SELECT switch

For selecting the type of host computer. (See page 35.)

3 TO HOST terminal

For connection to a host computer that does not have a MIDI interface. (See

page 35.)

4 DC IN jack

For connection to the PA-5B AC power adaptor.

5 OUTPUT L, R jacks (Left, Right)

For connection to a stereo amplifier/speaker system.

6 INPUT L, R jacks (Left, Right)

For connection between tone generator modules, CD players or other external

audio devices.

Effectors and equalizers cannot be applied to a signal that is input through

these jacks.

MIDI

THRU

OUT I N-A

I N-B

MIDI Mac

PC-2 PC-1

HOST SELECT

TO HOST

DC IN

SER NO.

R

L

OUTPUT INPUT

123456

The MU100 — What It Is and What It Can Do

19

The MU100 — What It Is and What It Can Do

What It Is...

The MU100 is a full-featured and easy-to-use tone generator, that provides an

unprecedented wealth of Voices and expressive sonic control. It features full

General MIDI Level 1 compatibility with 128 General MIDI Voices and 9 drum

Voices. It also provides new XG compatibility, with a huge total of 1267 Voices

and 46 drum Voices.

The MU100 has 64-note polyphony and is 32-Part multi-timbral. In other

words, the MU100 has 32 different Parts, each with its own Voice, so that up to

32 different Voices can be sounded simultaneously. Since the MU100 features

dual MIDI input ports (A and B), 16 Parts can be played from one MIDI port and

the remaining 16 from the other port.

Additional A/D Parts let you connect up to two external signals — such as a

microphone, electric guitar or CD player — and mix them with the MU100’s

Voices through stereo input jack.

The MU100 also has a TO HOST terminal for easy interfacing with a com-

puter, allowing you to play the Voices using your favorite music software. This

is where the advanced multi-timbral capabilities come in, letting you playing

sophisticated arrangements using up to 32 different Voices at the same time.

Although Voices cannot be directly edited, the various Part controls and Edit

mode give you tools for transforming or customizing the sound of the Voices.

What’s more, the MU100 has a built-in multi-effect processor, with six indepen-

dent digital effect “units” for enhancing the sound.

The MU100 also features a special Performance mode, in which four Parts

are played simultaneously over a single MIDI channel. Connected to a MIDI

keyboard, this effectively gives you four tone generators in one. The MU100

gives you 100 factory-programmed Preset Performances plus 100 Internal Per-

formance locations for storing your own original Performances.

About General MIDI

General MIDI is a new addition to the worldwide MIDI standard. MIDI, as

you know, stands for Musical Instrument Digital Interface, and makes it

possible for various electronic musical instruments and other devices to “com-

municate” with each other. For example, by connecting a sequencer to the

MU100’s MIDI IN terminal, you could play back a song on the sequencer

using the Voices of the MU100.

So, where does General MIDI fit in all of this? One of the most important

features of General MIDI is in the standardization of Voices. This means that a

song recorded in the General MIDI format can be played back on any General

MIDI compatible tone generator and sound just as the composer intended. For

20

The MU100 — What It Is and What It Can Do

example, if there is an alto sax solo in the song, it will be played by an alto sax

Voice on the General MIDI tone generator (and not by a tuba or harpsichord!).

Since the MU100 is fully compatible with General MIDI, you can take advan-

tage of the vast wealth of musical material recorded in that format.

About XG format

The new XG format is an extension of General MIDI, and provides a number of

significant improvements and enhancements. XG-compatible song data takes

advantage of the extensive MIDI control and built-in effects of the MU100 (and

other MU-series instruments).

To take greatest advantage of the powerful capabilities of XG, we recom-

mend using XG-compatible instruments and software. For example, XG-com-

patible keyboards such as the Yamaha CBX-K2 keyboard and software give you

direct controls for accessing the full expressive potential of the MU100’s XG

Voices and the XG-related parameters.

What It Can Do...

Here are a few ideas on how you can use the MU100. The list below is not

comprehensive, but is meant to be a general guide to the possibilities and pro-

vide a starting point or springboard for your own creative ideas and explora-

tions.

Using With a MIDI Keyboard

Use the MU100 as a supplementary tone generator with your MIDI key-

board and play the Voices of both instruments in a layer together. Or, use the

convenient Performance mode, and play four Voices on the MU100 at once.

You can split the four Voices across the keyboard, playing each from a dif-

ferent register. Or you can create sophisticated velocity splits, in which a

different Voice is heard depending on how strongly you play the keyboard.

Or use keyboard and velocity splits together for even greater flexibility.

The MU100 — What It Is and What It Can Do

21

The MU100 — What It Is and What It Can Do

Using with the XG Plug-in System

The MU100 is equipped with a connector that supports the XG Plug-in Sys-

tem. The system currently (as of September 1998) consists of three easy-to-

use plug-in boards: the PLG100-DX, PLG100-VL and PLG100-VH.

A vast range of features like Virtual Acoustic Sound Synthesis, dynamic

sound effects, powerful FM synthesis voices, vocal harmonies and editing

features enhance the functionality of the MU100 without complicated set-

ups and wiring. The XG Plug-in System provides a seamless, fully inte-

grated solution to help you create the ultimate studio environment.

Using With a Computer or Sequencer

Home Studio Setup

The MU100 integrates instantly and easily into any existing setup. If you have a

MIDI keyboard, computer and sequencing software, the MU100 with its high-qual-

ity Voices and multi-timbral capabilities can expand your home studio system.

Carry It With You

If you have a laptop computer (and sequencing software), simply connect the

MU100, plug in some headphones and you’ve got a complete, high-powered

music making system that’s ready to go wherever you go. Use it for composing,

arranging, practicing or making/playing demos for your band.

Use It at a Gig

Similarly, you can connect a laptop or a MIDI data filer and playback song data with

the MU100’s Voices. Plug a microphone into one of the A/D inputs and a guitar into

the other, and you can mix your own live performance with the sequencer tracks.

Multimedia

Since it’s compatible with General MIDI and XG, the MU100 is a natural for

multimedia applications. Bring it with you to a presentation — since the com-

puter interface is built-in to the MU100, it hooks up instantly and easily to the

computer’s serial port or printer port, without the need for any other equipment.

22

The MU100 — What It Is and What It Can Do

About the Modes of the MU100

The MU100 has two main operating modes: Multi and Performance. In Multi

mode, the MU100 is a 32-Part multi-timbral tone generator; in Performance

mode, the MU100 effectively functions as four tone generators controlled

over a single MIDI channel.

Which mode the MU100 is in depends on the selected Sound Module

mode. If XG, TG300B or C/M are selected, the MU100 automatically sets

itself to the Multi mode. When PFM is selected, the MU100 is in the Perfor-

mance mode. (For information on selecting the Sound Module mode, see

page 156.)

Each mode provides compatibility with different music software and hard-

ware.

XG: This mode provides the full potential of the MU100, giving you

access to the 1074 XG Voices.

TG300B: This mode provides compatibility with the GM-B mode of the

TG300 Tone Generator.

C/M: This mode provides compatibility with most computer music soft-

ware not supported by the other two Multi modes.

PFM: This mode (Performance) lets you play four Voices simultaneously

over a single MIDI channel. (For more information on using the

Performance mode, see page 39.)

The bottom right of the display indicates the currently selected Sound Mod-

ule mode.

Selected Sound Module mode.

NOTE

When set to the TG300B mode, the MU100 may not be able to play TG300-specific

song data with complete accuracy. However, MIDI data designed for other com-

puter music tone generators is compatible with the MU100.

XG

TG300B

C/M

PERFORM

Strona się ładuje...

Yamaha MU100 Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Yamaha MU100 Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty