Yamaha SYSTEM74N Instrukcja obsługi

Typ
Instrukcja obsługi
1EN
Acoustic Electric Guitar System74N
Owners Manual
Thank you for purchasing the Yamaha Guitar with the Atmosfeel™ technology.
Featuring Yamaha’s newly developed three-way system with built-in piezoelectric sensors, the acoustic guitar sound is captured as is, with amazing
accuracy across the entire frequency range - from low to high - creating an expressive, natural warm stereophonic sound. To obtain the best perfor-
mance and potential from this instrument, we encourage you to read this manual before use.
Note that this manual covers only the electronic parts of this product. For information on the other non-electronic parts, refer to the separate Acous-
tic Guitar Owner’s Manual.
Specifications
System: System74N Pickup: Hybrid 3-way System Control: Master
Volume, Mic Blend, Treble EQ
Output Jack: Combination end pin/line out
power switch
Output Impedance: 1 kΩ Power: AA battery x2 (alkaline
or nickel-metal hydride) *
1 Battery Life: Approximately 28 hours using
alk
aline batteries, approximately 24 hours using nickel metal hydride batter-
ies.*
2 Accessories: Neck adjustment hex wrench x1, AA battery x2
*
1
For best performance, we recommend the use of alkaline or nickel-metal hydride
batteries. When using nickel-metal hydride batteries, please follow the instructions in
the manual provided with the batteries.
*
2
Depends upon operating conditions.
*
The contents of this manual apply to the latest specifications as of the publishing
date. To obtain the latest manual, access the Yamaha website then download the
manual file. Since specifications, equipment or separately sold accessories may
not be the same in every locale, please check with your Yamaha dealer.
EN
system74n_en.fm Page 1 Thursday, May 23, 2019 11:19 AM
2EN
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of
serious injury or even death from electrical shock, short-circuiting,
damages, fire or other hazards. These precautions include, but are not
limited to, the following:
This instrument contains no user-serviceable parts. Do not open the instrument or attempt to
disassemble or modify the internal components in any way. If it should appear to be
malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha
service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet conditions, place it
on any containers (such as vases, bottles, or glasses) containing liquids that might spill into
any openings. If any liquid such as water seeps into the instrument, turn off the power
immediately and have the instrument inspected by qualified Yamaha service personnel.
When one of the following problems occur, immediately turn off the power and remove all
batteries from the instrument, then have the instrument inspected by Yamaha service
personnel.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
Follow the precautions below. Failure to do so might result in explosion, fire, overheating or
battery fluid leakage.
- Do not tamper with or disassemble batteries.
- Do not dispose of batteries in fire.
- Do not attempt to recharge batteries that are not designed to be charged.
- Keep the batteries separate from metallic objects such as necklaces, hairpins, coins, and keys.
- Use the specified battery type only.
- Use new batteries, all of which are the same type, same model, and made by the same manufacturer.
- Always make sure all batteries are inserted in conformity with the +/- polarity markings.
PRECAUTIONS
Do not open
Water warning
If you notice any abnormality
Battery
system74n_en.fm Page 2 Thursday, May 23, 2019 11:19 AM
3EN
- When the batteries run out, or if the instrument is not to be used for a long time, remove the
batteries from the instrument.
Keep batteries away from small children who might accidentally swallow them.
If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should come in
contact with your eyes, mouth, or skin, wash immediately with water and consult a doctor.
Battery fluid is corrosive and may possibly cause loss of sight or chemical burns.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of
physical injury to you or others, or damage to the instrument or other
property. These precautions include, but are not limited to, the following:
Before connecting the instrument to other electronic components, turn off the power for all
components. Before turning the power on or off for all components, set all volume levels to
minimum.
Be sure to set the volumes of all components at their minimum levels and gradually raise the
volume controls while playing the instrument to set the desired listening level.
Do not place the instrument in an unstable position where it might accidentally fall over.
Do not rest your weight on, or place heavy objects on the instrument, and do not use
excessive force on the buttons, switches or connectors.
Connection
* Yamaha cannot be held responsible for damage caused by improper use or
modifications to the instrument.
* Make sure to discard used batteries according to local regulations.
* Please read the instruction manual for the external audio device such as a
guitar amplifier, etc., prior to use.
Location
Handling caution
system74n_en.fm Page 3 Thursday, May 23, 2019 11:19 AM
4EN
Part Names/Control Descriptions
Controls
system74n_en.fm Page 4 Thursday, May 23, 2019 11:19 AM
5EN
q Master Volume
Turn the Master Volume control all the way down to the minimum
before connecting/disconnecting a cable. When a cable is connected to
the r Output Jack, the LED located inside the Master Volume lights
green for one second, then the Atmosfeel™ feature will be turned on.
The output level can be adjusted by turning this control to the right
(clockwise) to increase the level, or to the left (counterclockwise) to
reduce the level.
w Mic Blend
Adjusts the level of the sound picked up with the microphones installed
inside the body. Turning this control to the right (clockwise) enhances
the body resonance and spaciousness of the sound. Adjusting this does
not change the output level.
NOTE
Feedback might occur depending on the usage conditions. Use the w Mic
Blend or the e Treble EQ to adjust the sound.
e Treble EQ
Adjusts the level of the high frequencies. Turning this control to the
right (clockwise) gradually boosts the higher frequencies. Turning it to
the left (counterclockwise) gradually cuts them.
r Output jack/battery holder
The output jack and battery compartment are combined into a single
unit. Inserting a plug into the output jack switches the internal preampli-
fier on. To prolong the life of your battery, unplug the cable from the
output jack when not in use.
system74n_en.fm Page 5 Thursday, May 23, 2019 11:19 AM
6EN
q Slide the tab on the endpin section in the direction indicated by the
arrow in the diagram below to release the lock, then pull out the battery
holder.
w Insert two AA batteries making sure that the battery poles are properly
aligned with the polarity markings on the battery holder.
e Slide the battery holder back into the endpin section until it locks.
NOTICE
When using nickel metal-hydride batteries, take care not to damage the
battery casing or poles when installing and removing the batteries.
Remaining Battery Level
The LED located inside the Master Volume flashes red when it is time to
change the batteries. Once the LED begins flashing, the remaining opera-
tion time is approximately two hours with alkaline batteries and about one
hour when using nickel metal hydride batteries (Time varies according to
operating conditions). Please replace the batteries as soon as possible.
Replacing the Batteries
Battery Holder
AA battery
x2
Tab
Release the lock
Endpin section
system74n_en.fm Page 6 Thursday, May 23, 2019 11:19 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Yamaha SYSTEM74N Instrukcja obsługi

Typ
Instrukcja obsługi