Panasonic SCPT70 Instrukcja obsługi

Marka: Panasonic

Model: SCPT70

Kategoria: Odtwarzacze DVD

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

SC-PT70

[EP]

RQTX1024-Z

Operating Instructions

Návod k obsluze

Instrukcja obsługi

Használati útmutató

DVD Home Theater Sound System

Systém zvuku domácího kina s DVD pâehrávaçem

Zestaw kina domowego z odtwarzaczem DVD

DVD házimozi hangrendszer

Model No. / Model č. / Nr Modelu / Model No.SC-PT70

until

2009/10/01

Dear customer

Thank you for purchasing this product. For optimum performance and

safety, please read these instructions carefully.

Before connecting, operating or adjusting this product, please read

the instructions completely.

Please keep this manual for future reference.

The illustrations shown may differ from your unit.

Vážený zákazníku

Děkujeme za zakoupení tohoto výrobku. Pro dosažení optimálního

výkonu a z bezpečnostních důvodu si pečlivě přečtěte tyto pokyny.

Před zapojením, obsluhou nebo nastavením tohoto výrobku si

přečtěte celý tento návod.

Návod uschovejte k pozdějšímu použití.

Uvedené ilustrace se mohou od vašeho přístroje lišit.

Szanowny Nabywco

Dziękujemy za zakupienie tego produktu. Aby zapewnić optymalną pracę

urządzenia i jego bezpieczną obsługę, należy dokładnie przeczytać

niniejszą instrukcję.

Przed podłączeniem, użytkowaniem lub regulacją produktu należy

przeczytać całą instrukcję obsługi.

Należy zachować tę instrukcję obsługi na przyszłość.

Urzdązenie pokazane na ilustracjach może się różnić od

zakupionego urządzenia.

Tisztelt Vásárló!

Köszönjük, hogy termékünket választotta. A biztonság és a készülék

optimális teljesítménye érdekében kérjük, hogy figyelmesen olvassa el a

használati útmutatót!

A készülék csatlakoztatása, üzembe helyezése és beállítása előtt

kérjük, figyelmesen olvassa végig a használati útmutatót.

Kérjük, őrizze meg ezt az útmutatót.

Az útmutatóban látható ábrák eltérhetnek az Ön készülékétől.

Region number/Číslo regionu/Numer regionu/Régiókód

The player plays DVD-Video marked with labels containing the

region number “2” or “ALL”.

Přehrávač přehrává disky DVD-Video označené štítky s číslem

regionu „2“ nebo „ALL“.

Odtwarzacz obsługuje płyty DVD-Video z numerami regionów „2“ lub

„ALL“.

A DVD lejátszó a megfelelő régiókóddal “2” vagy “ALL” jelzéssel

jelölt DVD-Video lemezeket játssza le.

Example/Příklad/Przykład/Például:

2 ALL

The illustration shows SC-PT70.

Obrázek představuje model SC-PT70.

Na rysunku przedstawiono model SC-PT70.

SC-PT70EP-RQTX1024-Z_eng.book Page 1 Thursday, August 20, 2009 10:19 AM

RQTX1024

System/Systém/Zestaw/Rendszer SC-PT70

Main unit/Hlavní jednotka/Główne urządzenie/Készülék SA-PT70

Front speakers/Čelní reproduktory/Głośniki przednie/Első hangsugárzók SB-HF70

Center speaker/Centrální reproduktor/Głośnik centralny/Középcsatorna hangsugárzó SB-HC70

Surround speakers/Prostorové reproduktory/Głośniki dźwięku przestrzennego/Háttér hangsugárzók SB-HS70

Subwoofer/Subwoofer/Głośnik niskotonowy/Extra mélysugárzó SB-HW70

Operations in these instructions are described mainly with the remote control, but you can perform the operations on the main unit if

the controls are the same.

Popis obsluhy v tomto návodu se týká především dálkového ovladače, avšak obsluhu lze provádět také pomocí ovládacích prvků

hlavní jednotky – jestliže jsou stejné jako na ovladači.

W instrukcji obsługi opisano głównie czynności wykonywane z poziomu pilota, można je jednak wykonać z poziomu urządzenia

głównego, jeżeli znajdujące się tam przyciski są takie same.

A használati útmutatóban ismertetett mûveletek fõleg a távvezérlõ használatára vonatkoznak, de ezeket a mûveleteket a készülék

kezelõszerveivel ugyanúgy elvégezheti.

Accessories/Příslušenství/Akcesoria/Tartozékok

Please check and identify the supplied accessories.

Zkontrolujte a odlište dodané příslušenství.

Sprawdź załączone akcesoria.

Kérjük, ellenőrizze és azonosítsa a mellékelt tartozékokat.

∏ 1 Remote control/Dálkový ovladač/Pilot/Távvezérlő

(N2QAYB000456)

∏ 2 Remote control batteries/Baterie dálkového ovladače/Baterie pilota/Elem a távvezérlőhöz

∏ 1 FM indoor antenna/Pokojová anténa FM/Wewnętrzna antena FM/URH szobaantenna

∏ 5 Speaker cables/Kabely reproduktorů/Kabel głośnikowe/Rövid kábel (középcsatorna hangsugárzóhoz)

∏ 1 AC mains lead/Sít’ový kabel/Przewód zasilania/Hálózati csatlakozókábel

∏ 1 Sheet of speaker cable stickers/Arch nálepek na kabely reproduktorů/Arkusze nalepek na kable głośnikowe/

Csomag címke a hangsugárzó kábelekhez

(Side of product)

(Bok přístroje)

(z boku urządzenia)

(A készülék oldalsó része)

(Inside of product)

(Uvnitř přehrávače)

(Wewnątrz urządzenia)

(A készülék belsejében)

SC-PT70EP-RQTX1024-Z_eng.book Page 2 Thursday, August 20, 2009 10:19 AM

RQTX1024

[Note] / [Poznamka] / [Uwaga] / [Megjegyzés]

The circled numbers indicated in the operating instructions (e.g. Press [Í]1.) correspond to the circled numbers in the above.

Zakroužkovaná čísla uvedená v návodu k obsluze (např. Stiskněte [Í]1.) odpovídají zakroužkovaným číslům viz výše.

Zakreślone cyfry zaznaczone w instrukcji obsługi (np. Wciśnij [Í]1.) odnoszą się do zakreślonych cyfr w tejże instrukcji.

A használati utasításban feltüntetett bekarikázott számok (pl. Nyomja meg az [Í]1.gombot) a fenti bekarikázott számoknak felelnek meg.

RETURN

VOL

STOP

1 2 3

4 5 6

7 8

PLAY MODE

VOL

SKIP

SLOW

SKIP

PLAY

PAUSE

DVD

RADIO

EXT-IN

MUTE

SOUND

SURROUND

PLAY

LIST

SLEEP

CH SELECT

SETUP

W.SRD

FL DISPLAY

CANCEL

REPEAT

VOL

MUSIC PORT

OPEN/CLOSE

1 2

4 5 6

7 8

SC-PT70EP-RQTX1024-Z_eng.book Page 3 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Control reference guide

Other Panasonic audio/video equipment may start functioning when you

operate the unit using the supplied remote control.

You can operate this unit in another mode by setting the remote control

operating mode to “REMOTE 2”.

The main unit and remote control must be set to the same mode.

1 Press [EXT-IN]@ to select “AUX/TV”.

2 Press and hold [1]8 on the main unit and [2] on the remote control

until the main unit’s display shows “REMOTE 2”.

3 Press and hold [OK]9 and [2] on the remote control for at least 2

seconds.

To change the mode back to “REMOTE 1”, repeat the steps above by

replacing [2] with [1].

Remote control

1 Turn the main unit on/off (B 8)

2 Select the play mode

(B 11)

3 Select channels and title numbers etc. / Enter numbers

(B 8, 10)

4 Set the repeat mode

(B 11)

5 Basic operations for play (B 10)

6 Select preset radio stations (B 8)

7 Select surround sound effects (B 9)

8 Show a disc top menu or program list (B 10, 11)

9 Select or confirm menu items / Frame-by-frame (B 10)

: Show a disc menu or play list (B 10, 12)

; Show setup menu or select speaker channel (B 8, 10)

< Turn Whisper-mode Surround on/off (B 10)

= TV operations

Aim the remote control at the Panasonic TV and press the

button.

[Í]: Turn the TV on/off

[AV]: Change the TV’s video input mode

[r, s]: Adjust the TV volume

This may not work properly with some models.

> Adjust the volume of the main unit

? Mute the sound

≥ “MUTE” flashes on the main unit’s display while the function is on.

≥ To cancel, press the button again or adjust the volume.

≥ Muting is cancelled when you switch the unit to standby.

@ Source select

[DVD]: Select disc as the source (B 8)

[RADIO]: Select FM tuner (B 8)

[EXT-IN]: Select external audio as the source (B 9)

AV#AUX/TV# MUSIC P.

^------------------------------}

A Select radio stations manually (B 8)

B Select sound mode (B 9)

C Show START menu (B 9)

D Show on-screen menu (B 12)

E Return to previous screen (B 10)

F Cancel (B 11)

G Switch information on the main unit’s display (B 10)

Set the Sleep timer

Press and hold [—SLEEP].

While the time is shown on the main unit’s display, press

[—SLEEP] repeatedly.

SLEEP 30 # SLEEP 60 # SLEEP 90 # SLEEP 120

^-------------------------- OFF (Cancel) (--------------------------}

≥ To confirm the remaining time, press and hold the button again.

Avoiding interference with other Panasonic equipment

Main unit

1 Standby/on switch (Í/I)

Press to switch the unit from on to standby mode or vice

versa. In standby mode, the unit is still consuming a small

amount of power. (B 10)

2 Open/Close the disc tray (B 10)

3 Remote control signal sensor

4 Display

5 Connect external music device (B 14)

6 Adjust the volume of the main unit

7 Stop playing

8 Play disc (B 10)

Language code list

Abkhazian: 6566

Afar: 6565

Afrikaans: 6570

Albanian: 8381

Ameharic: 6577

Arabic: 6582

Armenian: 7289

Assamese: 6583

Aymara: 6589

Azerbaijani: 6590

Bashkir: 6665

Basque: 6985

Bengali, Bangla: 6678

Bhutani: 6890

Bihari: 6672

Breton: 6682

Bulgarian: 6671

Burmese: 7789

Byelorussian: 6669

Cambodian: 7577

Catalan: 6765

Chinese: 9072

Corsican: 6779

Croatian: 7282

Czech: 6783

Danish: 6865

Dutch: 7876

English: 6978

Esperanto: 6979

Estonian: 6984

Faroese: 7079

Fiji: 7074

Finnish: 7073

French: 7082

Frisian: 7089

Galician: 7176

Georgian: 7565

German: 6869

Greek: 6976

Greenlandic: 7576

Guarani: 7178

Gujarati: 7185

Hausa: 7265

Hebrew: 7387

Hindi: 7273

Hungarian: 7285

Icelandic: 7383

Indonesian: 7378

Interlingua: 7365

Irish: 7165

Italian: 7384

Japanese: 7465

Javanese: 7487

Kannada: 7578

Kashmiri: 7583

Kazakh: 7575

Kirghiz: 7589

Korean: 7579

Kurdish: 7585

Laotian: 7679

Latin: 7665

Latvian, Lettish: 7686

Lingala: 7678

Lithuanian: 7684

Macedonian: 7775

Malagasy: 7771

Malay: 7783

Malayalam: 7776

Maltese: 7784

Maori: 7773

Marathi: 7782

Moldavian: 7779

Mongolian: 7778

Nauru: 7865

Nepali: 7869

Norwegian: 7879

Oriya: 7982

Pashto, Pushto: 8083

Persian: 7065

Polish: 8076

Portuguese: 8084

Punjabi: 8065

Quechua: 8185

Rhaeto-Romance:

8277

Romanian: 8279

Russian: 8285

Samoan: 8377

Sanskrit: 8365

Scots Gaelic: 7168

Serbian: 8382

Serbo-Croatian: 8372

Shona: 8378

Sindhi: 8368

Singhalese: 8373

Slovak: 8375

Slovenian: 8376

Somali: 8379

Spanish: 6983

Sundanese: 8385

Swahili: 8387

Swedish: 8386

Tagalog: 8476

Tajik: 8471

Tamil: 8465

Tatar: 8484

Telugu: 8469

Thai: 8472

Tibetan: 6679

Tigrinya: 8473

Tonga: 8479

Turkish: 8482

Turkmen: 8475

Twi: 8487

Ukrainian: 8575

Urdu: 8582

Uzbek: 8590

Vietnamese: 8673

Volapük: 8679

Welsh: 6789

Wolof: 8779

Xhosa: 8872

Yiddish: 7473

Yoruba: 8979

Zulu: 9085

SC-PT70EP-RQTX1024-Z_eng.book Page 4 Thursday, August 20, 2009 10:19 AM

Getting StartedPlaying DiscsOther OperationsReference

RQTX1024

ENGLISH

TABLE OF CONTENTS

Getting Started

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Control reference guide. . . . . . . . . . . . . . . . . . . . . . . . . . .4

Quick Start Guide

step 1 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

step 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Speaker connections. . . . . . . . . . . . . . . . . . . . . .6

Radio antenna connections. . . . . . . . . . . . . . . . .6

Audio and video connections . . . . . . . . . . . . . . .7

step 3 AC mains lead connection. . . . . . . . . . . . . . . 7

step 4 Preparing the remote control . . . . . . . . . . . . 7

step 5 EASY SETUP

. . . . . . . . . . . . . . . . . . . . . . . 8

Setting up the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Presetting stations automatically . . . . . . . . . . . . . . . . . . . . . 8

Confirming the preset channels . . . . . . . . . . . . . . . . . . . . . . 8

Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Selecting the playback source . . . . . . . . . . . . . . . . . . . . .9

Selecting the source from the START menu . . . . . . . . . . . . 9

Selecting the source by the remote control . . . . . . . . . . . . . 9

Playing Discs

Basic play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Other modes of play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Program and Random play . . . . . . . . . . . . . . . . . . . . . . . . 11

Using navigation menus . . . . . . . . . . . . . . . . . . . . . . . . . 11

Playing data discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Playing DVD-R/-RW (DVD-VR) discs . . . . . . . . . . . . . . . . 11

Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . 12

Other Operations

Using the VIERA Link “HDAVI Control

” . . . . . . . . . . . 13

One touch play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Auto input switching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Power off link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Speaker control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

VIERA Link Control only with TV’s remote control

(for “HDAVI Control 2 or later”) . . . . . . . . . . . . . . . . . . . . 14

Playing from MUSIC PORT . . . . . . . . . . . . . . . . . . . . . . . 14

Reference

Changing the player settings . . . . . . . . . . . . . . . . . . . . . 15

DivX information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Displaying DivX subtitles text . . . . . . . . . . . . . . . . . . . . . . 17

Speaker installation option. . . . . . . . . . . . . . . . . . . . . . . 17

Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Discs that can be played. . . . . . . . . . . . . . . . . . . . . . . . . 18

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Enjoying sound effects from all speakers

Enjoying surround sound effects. . . . . . . . . . . . . . . . .9

Selecting sound mode. . . . . . . . . . . . . . . . . . . . . . . . . .9

Whisper-mode Surround. . . . . . . . . . . . . . . . . . . . . . .10

Adjusting the speaker output level manually . . . . . .10

Adjusting the balance of the front speakers . . . . . . .10

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

PRODUCT DAMAGE,

≥DO NOT EXPOSE THIS APPARATUS TO RAIN,

MOISTURE, DRIPPING OR SPLASHING AND THAT NO

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

SHALL BE PLACED ON THE APPARATUS.

≥USE ONLY THE RECOMMENDED ACCESSORIES.

≥DO NOT REMOVE THE COVER (OR BACK); THERE

ARE NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

CAUTION!

≥ DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,

BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.

ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK

OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO

OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER

MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

≥ DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS

WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND

Other video connection

Other audio connection

step 3 AC mains lead connection

AC IN

To household mains socket

AC mains lead (included)

Main unit (rear)

step 4 Preparing the remote control

Batteries

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

R6/LR6, AA

Insert so the poles ( and ) match those in the remote control.

Press in and lift up.

Replace the cover.

≥ Use alkaline or manganese batteries.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in an automobile exposed to direct

sunlight for a long period of time with doors and windows closed.

Use

SC-PT70EP-RQTX1024-Z_eng.book Page 7 Thursday, August 20, 2009 10:19 AM

RQTX1024

ENGLISH

The Easy setup screen assists you in making necessary

settings.

≥Language

Select the language used on menu screen.

≥TV aspect

Select the aspect to suit your TV.

≥Speakers position

Select “5.1ch layout” mode or “2.1ch layout” mode according to your

speaker layout (B 6, Positioning).

≥Speaker check

Listen to speaker output to confirm speaker connections.

≥Speaker output

Make surround sound setting for speaker output.

Only when “5.1ch layout” mode is selected in “Speakers position”

above.

[Note]

≥ If this unit is connected to a “HDAVI Control 3 or later” compatible TV

via HDMI cable, the menu language and TV aspect information will be

retrieved via VIERA Link.

≥ If this unit is connected to a “HDAVI Control 2” compatible TV via

HDMI cable, the menu language information will be retrieved via

VIERA Link.

≥ Settings in the Easy setup can also be changed in the player settings

[e.g. language, TV aspect (B 15)].

Setting up the radio

Up to 30 stations can be set.

≥ “SET OK” is displayed when the stations are set, and the radio tunes

to the last preset station.

≥ “ERROR” is displayed when automatic presetting is unsuccessful.

Preset the channels manually (B right).

≥ The FM setting is also shown on the TV display.

To cancel the mode, press and hold the button again until “AUTO ST” is

displayed.

≥ The mode is also cancelled when you change the frequency.

Up to 30 stations can be set.

A station previously stored is overwritten when another station is stored

in the same channel preset.

step 5 EASY SETUP

Preparation

Turn on your TV and select the appropriate video input mode (e.g.

VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.

≥ To change your TV’s video input mode, refer to its operating

instructions.

≥ This remote control can perform some basic TV operations (B 4).

Press [Í]1 to turn on the unit.

≥ When the Easy setup screen appears automatically, skip step

2 to 6.

Press [DVD]@ to select “DVD/CD”.

Press [SETUP]; to show the setup menu.

Press [3, 4]9 to select “OTHERS” and press [OK]9.

Press [3, 4]9 to select “EASY SETUP” and press

[OK]9.

Press [OK]9 to select “SET”.

Press [3, 4]9 to select “Yes” and press [OK]9.

SET

MAIN

DISC

VIDEO

AUDIO

DISPLAY

HDMI

OTHERS

EXIT : SETUP

RETURN

Follow the messages and make the settings with

[3, 4]9 and [OK]9.

(B below, Easy setup settings)

Press [OK]9 to finish Easy setup.

Easy setup settings

Presetting stations automatically

Press [RADIO]@ to select “FM”.

Press [MENU]:.

Each time you press the button:

LOWEST (factory preset):

To begin auto preset with the lowest frequency.

CURRENT:

To begin auto preset with the current frequency.

To change the frequency, refer to “Manual tuning” (B right).

Press and hold [OK]9.

Release the button when “FM AUTO” is displayed.

The tuner starts to preset all the stations it can receive into the

channels in ascending order.

Confirming the preset channels

Press [RADIO]@ to select “FM”.

Press the numbered buttons to select a channel.

≥ To select a 2-digit number

e.g. 12: [S10]3 B [1] B [2]

Alternatively, press [X, W]6.

If noise is excessive

Press and hold [PLAY MODE]2 to display “MONO”.

Manual tuning

Press [RADIO]@ to select “FM”.

Press [6, 5]A to select the frequency.

≥ To start automatic tuning, press and hold [6, 5]A until the

frequency starts scrolling. Tuning stops when a station is found.

Presetting stations manually

1 While listening to the radio broadcast

Press [OK]9.

2 While the frequency is flashing on the display

Press the numbered buttons to select a channel.

≥ To select a 2-digit number

e.g. 12: [S10]3 B [1] B [2]

Alternatively, press [X, W]6, and then press [OK]9.

SC-PT70EP-RQTX1024-Z_eng.book Page 8 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Selecting the playback source

You can select sound effects, desired source, or access playback/menus

by using the START menu.

When “Input Selection” is selected

You can select a desired source from the menu.

≥ DVD/CD (B 8), FM (B 8), AV (B right), AUX/TV (B right),

MUSIC PORT (B 14)

When “Sound” is selected

You can select sound quality settings (B below, Equalizer).

When a disc is loaded, you can also access playback or menus from the

START menu.

e.g. [DVD-V]

When the on-screen control panel appears

e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)

You can operate the playback with the indicated controls.

[Note]

Confirm the audio connection to the SCART (AV) or AUX/TV terminal on

the main unit when you select the corresponding sources (B 7). Reduce

the volume on the TV to its minimum, and then adjust the volume of the

main unit.

≥ The following sound effects may not be available or may have no effect

with some sources.

≥

You may experience a reduction in sound quality when these sound effects

are used with some sources. If this occurs, turn the sound effects off.

“SRD” lights in the main unit’s display when there is output from the

surround speakers.

For “2.1ch layout”

mode

STANDARD:

Sound is output as it was recorded/encoded. Speaker output varies

depending on the source.

STEREO:

You can play any source in stereo. Surround sound effect is

unavailable.

A.SRD:

You can enjoy surround effect with any audio source.

When the signal is DTS or Dolby Digital, “/DTS” or “/DOLBY DIGITAL” will

also be displayed respectively.

Selected mode in “Speakers position” (B 8, Easy setup settings).

(Continued on next page)

Selecting the source from the START menu

Press [START]C to show the START menu.

This unit automatically turns on.

(The TV also turns on when using VIERA Link “HDAVI Control”. This

works only when in “DVD/CD” mode without any disc being loaded.)

e.g.

Press [3, 4]9 to select an item and press [OK]9.

≥ To exit, press [START]C.

Press [3, 4]9 to make the setting and press [OK]9.

DVD/CD Home Cinema

Input Selection

Sound

DVD/CD Home Cinema

Input Selection

Sound

Playback Disc

TOP MENU (DVD)

MENU (DVD)

Playback/menu access

Selecting the source by the remote control

Press To select

[DVD]@ DVD/CD

[RADIO]@ FM

[EXT-IN]@ Each time you press the button:

AV: For audio input through the SCART (AV)

terminal.

AUX/TV: For audio input through the AUX/TV terminal.

MUSIC P.: For audio input through MUSIC PORT. (B 14)

Enjoying sound effects from all speakers

Enjoying surround sound effects

Press [SURROUND]7.

Each time you press the button:

For “5.1ch layout”

mode

STANDARD:

Sound is output as it was recorded/encoded. Speaker output varies

depending on the source.

MULTI-CH:

You can enjoy sound from the front speakers, as well as the surround

speakers even when playing a 2-channel sound or non-surround sound.

MANUAL: (B below)

While “MANUAL” is displayed, press [2, 1]9 to select

other surround modes.

Each time you press [2, 1]9:

DOLBY PLII MOVIE

Suitable for movie software, or softwares recorded in Dolby Surround.

(except [DivX])

DOLBY PLII MUSIC

Adds 5.1-channel effects to stereo sources. (except [DivX])

S.SRD

You can enjoy sound from all speakers with stereo sources. (Surround

output will be in mono.)

STEREO

Sound will only be output to the front speakers and the subwoofer from

any source.

Recommended modes to enjoy TV audio or stereo

sources from all speakers:

≥ DOLBY PLII MOVIE ≥ DOLBY PLII MUSIC ≥ S.SRD

Selecting sound mode

Press [SOUND]B to select a sound mode.

Each time you press the button:

EQ: Equalizer

SUBW LVL: Subwoofer Level

C.FOCUS: Center Focus [Only when “5.1ch layout” mode is

selected in “Speakers position” (B 8, Easy setup

settings).]

While the selected mode is displayed, press [2, 1]9 to

make the settings.

Refer to the following for setting details of each sound effect.

Equalizer

You can select sound quality settings.

Each time you press [2, 1]9:

HEAVY: Adds punch to rock.

CLEAR: Clarifies higher sounds.

SOFT: For background music.

FLAT: Cancel (no effect is added).

Subwoofer level

You can adjust the amount of bass. The unit automatically selects

the most suitable setting according to the type of playback

source.

SUB W 1

SUB W 2

SUB W 3

SUB W 4

^-------------------------------------------------------------------J

≥ The setting you make is retained and recalled every time you

play the same type of source.

SC-PT70EP-RQTX1024-Z_eng.book Page 9 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Except [DivX]

You can enhance the surround effect for low volume 5.1-channel sound.

(Convenient for late night viewing.)

[Only when “5.1ch layout” mode is selected in “Speakers position” (B 8,

Easy setup settings).]

Preparation

≥ To display the picture, turn on the TV and select the appropriate video

input mode.

≥ Press [r, s VOL]> to adjust the volume to normal listening level.

≥ Select “TEST TONE” from “SPEAKER SETTINGS” in AUDIO menu

(B 16).

[Effective only when “5.1ch layout” mode is selected in “Speakers

position” (B 8, Easy setup settings) and playing 5.1-channel sound.]

Basic play

Preparation

To display the picture, turn on your TV and change its video input mode

(e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.

[Note]

≥ DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.

To preserve the unit’s motor and your TV screen, press [∫ STOP]5

when you are finished with the menus.

≥ Total title number may not be displayed properly on iR/iRW.

≥ ABOUT DIVX VIDEO:

DivX

is a digital video format created by DivX, Inc. This is an official

DivX Certified device that plays DivX video.

Center Focus

(Effective when playing audio containing center channel

sound.)

You can make the sound of the center speaker seem like it is

coming from within the TV.

C.FOCUS ON,------.C.FOCUS OFF

Whisper-mode Surround

Press [W.SRD]<.

Each time you press the button:

WHISPER-MODE SRD ON,--.WHISPER-MODE SRD OFF

Adjusting the speaker output level manually

Press [OK]9 to enter test tone mode.

Test tone will be output to each channel in the following order.

LEFT, CENTER, RIGHT, SURROUND RIGHT, SURROUND LEFT

e.g.

AUDIO-SPEAKER SETTINGS-TEST TONE

SPEAKER

LEFT

CENTER

RIGHT

SURROUND RIGHT

SURROUND LEFT

TRIM LEVEL

− −

0dB

− −

0dB

Press [OK]9 then [3, 4]9 to adjust the speaker level

for each speaker. (CENTER, SURROUND RIGHT,

SURROUND LEFT)

6dB to

6 dB (Factory preset: 0 dB)

≥ To exit the screen, press [SETUP];.

To adjust speaker level during play

1 Press and hold [—CH SELECT]; to select the speaker.

While the speaker channel is displayed, press [—CH SELECT];.

L# C# R# RS# LS# SW

^---------------------------------------------}

≥ You can adjust SW (Subwoofer) only if the disc includes a subwoofer

channel.

≥

“S” appears on the main unit’s display when you have selected “S.SRD”

(

B 9

, Enjoying surround sound effects). In this case, you can adjust both

surround speaker levels at the same time using

[3, 4]9

S: `6dB to i6dB

2 Press [3]9 (increase) or [4]9 (decrease) to adjust the speaker

level for each speaker.

C, RS, LS, SW: `6dB to i6dB

(L, R: Only the balance is adjustable.) (B below)

Adjusting the balance of the front speakers

Press and hold [—CH SELECT]; to select “L” or “R”.

While “L” or “R” is selected, press [2, 1]9.

Press [Í/I]1 or [Í]1 to turn on the unit.

Press [DVD]@ to select “DVD/CD”.

Press [< OPEN/CLOSE]2 to open the disc tray.

Load the disc.

≥ Load double-sided discs so the label for the

side you want to play is facing up.

Press [1]8 or [1 PLAY]5 to start play.

≥ Press [r, s VOL]6/> to adjust the volume.

Basic controls

One touch play (remote control only): [1 PLAY]5

(during standby mode)

The main unit automatically turns on and starts playing the disc in the

tray.

Stop: [∫ STOP]5

The position is memorised while “RESUME STOP” is on the screen.

≥ Press [1 PLAY]5 to resume.

≥ Press [∫ STOP]5 again to clear the position.

Label facing up

Pause: [; PAUSE]5

≥ Press [1 PLAY]5 to restart play.

Skip: [:, 9 SKIP]5

Search: [6, 5]5 (during play)

≥ Up to 5 steps.

≥ Press [1 PLAY]5 to start normal play.

Slow-motion: [6, 5]5 (during pause)

≥ [VCD] Slow-motion: Forward direction only.

≥ [MPEG4] [DivX] Slow-motion: Does not work.

Frame-by-frame: [2;, ;1]9 (during pause)

[DVD-VR] [DVD-V] [VCD]

≥ [DVD-VR] [VCD] Forward direction only.

On-screen item select: [3, 4, 2, 1, OK]9

[3, 4, 2, 1]9: Select

[OK]9: Confirm

Enter number: Numbered buttons

[DVD-VR]

[DVD-V] [VCD] [CD]

e.g. To select 12: [S10]3 B [1] B [2]

[VCD] with playback control

Press [∫ STOP]5 to cancel the PBC function, and then press the

numbered buttons.

[DVD-V] Show a disc top menu: [TOP MENU]8

[DVD-V] Show a disc menu: [MENU]:

Return to previous screen: [RETURN]E

[VCD] (with playback control) Show a disc menu: [RETURN]E

Main unit display: [FL DISPLAY]G

[DVD-VR] [DVD-V] [WMA] [MP3] [MPEG4] [DivX]

Time display

,-. Information display (e.g. [DVD-VR] Program number)

[JPEG]

SLIDE

,-.Contents number

SC-PT70EP-RQTX1024-Z_eng.book Page 10 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Other modes of play

This works only when the elapsed play time can be displayed. It also

works with all JPEG content.

Items shown differ depending on the type of disc and playback mode.

Preparation

≥ [DVD-VR] Select “DATA” in “DVD-VR/DATA” (B 16, OTHERS menu) to

play WMA, MP3, JPEG, MPEG4 or DivX contents.

≥ If “PLAYBACK MENU” screen appears, select “AUDIO/PICTURE” or

“VIDEO” (B right, Using PLAYBACK MENU), then proceed with the

above.

≥ For a disc with both WMA/MP3 and JPEG contents, select either music

or picture contents.

WMA/MP3: Select “MUSIC PROGRAM” or “MUSIC RANDOM”.

JPEG: Select “PICTURE PROGRAM” or “PICTURE RANDOM”.

≥ [DVD-V] Some items cannot be played even if you have programmed

them.

To select all the items

Press [3, 4]9 to select “ALL” and press [OK]9.

To clear the selected program

1 Press [1]9 and then press [3, 4]9 to select the program.

2 Press [CANCEL]F.

To clear the whole program

Press [1]9 several times to select “CLEAR ALL”, and then press [OK]9.

The whole program is also cleared when the disc tray is opened, the unit

is turned off or another source is selected.

Using navigation menus

[DVD-VR] Select “DATA” in “DVD-VR/DATA” (B 16, OTHERS menu) to

play WMA, MP3, JPEG, MPEG4 or DivX contents.

“PLAYBACK MENU” screen appears when the disc contains both video

(MPEG4/DivX) and other format (WMA/MP3/JPEG).

You can select to play from your desired item while the “DATA-DISC”

screen is displayed.

e.g.

≥ To display/exit the screen, press [MENU]:.

Play starts from the selected content.

∫ [JPEG] Selecting the picture in Thumbnail menu

To go to other group

1 Press [3]9 to select the group name.

2 Press [2, 1]9 to select the group and press [OK]9.

≥ Titles appear only if the titles are recorded on the disc.

≥ You cannot edit programs, play lists and disc titles.

(Continued on next page)

Repeat play

During play, press [REPEAT]4 to select an item to be

repeated.

e.g. [DVD-V]

`TITLE ---. `CHAP. ---. `OFF

^----------------------------------------------------b

To cancel, select “OFF”.

Program and Random play

[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] [MPEG4] [DivX]

While stopped, press [PLAY MODE]2 to select the play

mode.

Program and random playback screens appear sequentially.

Program ------------------------------------------) Random

^--- Exit program and random screens (}

Program play (up to 30 items)

Press [3, 4]9 to select an item and press [OK]9.

e.g. [DVD-V]

≥ Repeat this step to program other items.

≥ To return to the previous menu, press [RETURN]E.

Press [1 PLAY]5 to start play.

Random play

(Only when the disc has groups or multiple titles.)

Press [3, 4]9 to select a group or title and press

[OK]9.

e.g. [DVD-V]

≥ “¢” represents selected. To deselect, press [OK]9 again.

Press [1 PLAY]5 to start play.

DVD-V PROGRAM

SELECT TITLE

TITLE CHAPTER

TITLE 1

TITLE 2

TITLE 3

TITLE 4

DVD-V RANDOM

SELECT TITLE

TITLE 1

TITLE 2

TITLE 3

Playing data discs

[WMA] [MP3] [JPEG] [MPEG4] [DivX]

Using PLAYBACK MENU

Press [3, 4]9 to select “AUDIO/PICTURE” or “VIDEO”

and press [OK]9.

≥ To start play, press [1 PLAY]5.

≥ To select an item to play, refer “Playing from the selected item”

(B below).

Playing from the selected item

Press [3, 4]9 to select an item and press [OK]9.

≥ Press [2, 1]9 to skip page by page.

≥ To return to 1 level up from the current folder, press [RETURN]E.

≥ Maximum: 28 characters for file/folder name.

While picture is displayed, press [TOP MENU]8 to show

the thumbnail menu.

e.g.

Press [3, 4, 2, 1]9 to select a picture and press

[OK]9.

≥ Press [:, 9 SKIP]5 to skip page by page.

Playing DVD-R/-RW (DVD-VR) discs

[DVD-VR]

Playing the programs

While stopped, press [DIRECT NAVIGATOR]8.

e.g.

≥ To exit the screen, press [DIRECT NAVIGATOR]8.

Press [3, 4]9 to select the program and press [OK]9.

≥ Press [2, 1]9 to skip page by page.

PLAYBACK MENU

WMA/MP3/JPEG

MPEG4/DivX

AUDIO/PICTURE

VIDEO

DATA-DISC

ROOT

RETURN

Perfume

Underwater

Fantasy planet

Starpersons1

Group (Folder):

Content (File):

: WMA/MP3

: JPEG

: MPEG4/DivX

JPEG images G 1/ 1:C 3/ 9

Group name

Group and content

number

DATE

LENGTH

TITLE

0:16:02

10/11

LIVE CONCERT

02:15

0:38:25

12/05

AUTO ACTION

1:16:05

04/03

CINEMA

01:30

SC-PT70EP-RQTX1024-Z_eng.book Page 11 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

This works only when the disc contains a play list.

Using on-screen menus

Playing a play list

While stopped, press [PLAY LIST]:.

e.g.

≥ To exit the screen, press [PLAY LIST]:.

Press [3, 4]9 to select the play list and press [OK]9.

≥ Press [2, 1]9 to skip page by page.

Press [FUNCTIONS]D to show the on-screen menu.

Each time you press the button:

Menu 1 (Disc/Play)

Menu 2 (Video)

Menu 3 (Audio)

Menu 4 (HDMI)

Exit

Press [3, 4, 2, 1]9 to select the item and press

[OK]9.

Press [3, 4]9 to make the settings and press [OK]9.

Press [RETURN]E to exit.

Items shown differ depending on the type of disc.

Menu 1 (Disc/Play)

TRACK SEARCH, TITLE SEARCH, CONTENT SEARCH,

CHAPTER SEARCH, PG SEARCH (Program Search),

PL SEARCH (Playlist Search)

To start from a specific item

≥ [VCD] This does not work when using playback control.

e.g. [DVD-V]: T2 C5

To select numbers for data disc

e.g. 123: [S10]3 B [1] B [2] B [3] B [OK]9

AUDIO

[DVD-V] [DivX] (with multiple soundtracks)

To select audio soundtrack

[DVD-VR] [VCD]

To select “L”, “R”, “L+R” or “L R”

[DVD-V] (Karaoke disc)

To select “ON” or “OFF” for vocals

To select “OFF”, “V1”, “V2” or “V1+V2” for vocal selections

Actual operations depend on the disc. Read the disc’s instructions for details.

Signal type/data

LPCM/PPCM/ D/DTS/MP3/MPEG: Signal type

kHz (Sampling frequency)/bit/ch (Number of channels)

≥ [DivX] It may take some time for play to start if you change the audio on

a DivX video disc.

DATE

LENGTH

TITLE

0:00:10

11/11

CITY PENGUIN

00:01

0:01:20

12/01

FOOTBALL

1:10:04

01/02

SPECIAL

01:20

1:ENG

3/2.1ch

1 :ENG

OFF

TITLE SEARCH

Current item

Item name

e.g. Menu 1 (Disc/Play) [DVD-V]

C 1

1:ENG

3/2.1ch

1 :ENG

OFF

CHAPTER SEARCH

Current setting

e.g. Menu 1 (Disc/Play) [DVD-V]

3/2 .1ch

.0: No surround

.1: Mono surround

.2: Stereo surround (left/right)

.1: Low frequency effect

(not displayed if there is no signal)

.1: Center

.2: Front leftiFront right

.3: Front leftiFront rightiCenter

e.g.

PLAY SPEED

[DVD-VR] [DVD-V]

To change play speed

–from “k0.6” to “k1.4” (in 0.1-unit steps)

≥ Press [1 PLAY]5 to return to normal play.

≥ After you change the speed

– Dolby Pro Logic II has no effect.

– Audio output switches to 2-channel stereo.

– Sampling frequency of 96 kHz is converted to 48 kHz.

≥ This function may not work depending on the disc’s recording.

REPEAT MODE

(B 11, Repeat play)

A-B Repeat (To repeat a specified section)

Except [JPEG] [MPEG4] [DivX] [DVD-VR] (Still picture part) [VCD] (SVCD)

Press [OK]9 at the starting and ending points.

≥ Select “OFF” to cancel.

SUBTITLE

[DVD-V] [DivX] (with multiple subtitles) [VCD] (SVCD only)

To select subtitle language

≥ On iR/iRW, a subtitle number may be shown for subtitles that are

not displayed.

[DVD-VR] (with subtitle on/off information)

To select “ON” or “OFF”

≥ This may not work depending on the disc.

[DivX] (B 17, Displaying DivX subtitles text)

ANGLE

[DVD-V] (with multiple angles)

To select a video angle

DATE DISPLAY

[JPEG] To select “ON” or “OFF” for picture’s date display

ROTATION

[JPEG] To rotate a picture (during pause)

0,------. 90,------.180,------.270

^--------------------------------------------J

Menu 2 (Video)

PICTURE MODE

NORMAL

CINEMA1:

CINEMA2:

DYNAMIC:

ANIMATION:

Mellows images and enhances detail in dark scenes.

Sharpens images and enhances detail in dark scenes.

Enhances the contrast for powerful images.

Suitable for animation.

ZOOM

To select zoom sizes

NORMAL, AUTO (

[DVD-VR]

[DVD-V] [VCD]

≥ [JPEG]: during pause

JPG

DATE

SC-PT70EP-RQTX1024-Z_eng.book Page 12 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Using the VIERA Link “HDAVI

Control

”

VIERA Link “HDAVI Control”

VIERA Link “HDAVI Control” is a convenient function that offers linked

operations of this unit, and a Panasonic TV (VIERA) under “HDAVI

Control”. You can use this function by connecting the equipment with the

HDMI cable. See the operating instructions for connected equipment for

operational details.

≥ VIERA Link “HDAVI Control”, based on the control functions provided by

HDMI which is an industry standard known as HDMI CEC (Consumer

Electronics Control), is a unique function that we have developed and

added. As such, its operation with other manufacturers’ equipment that

supports HDMI CEC cannot be guaranteed.

≥ This unit supports “HDAVI Control 4” function.

“HDAVI Control 4” is the newest standard (current as of December,

2008) for Panasonic’s HDAVI Control compatible equipment. This

standard is compatible with Panasonic’s conventional HDAVI

equipment.

≥ Please refer to individual manuals for other manufacturers’ equipment

supporting VIERA Link function.

The TV with “HDAVI Control 2 or later” function enables the following

operation: VIERA Link Control only with TV’s remote control (for

“HDAVI Control 2 or later”) (B 14).

Preparation

≥ Confirm that the HDMI connection has been made (B 7).

≥ Confirm the audio connection to the AUX/TV terminal (B 7).

“AUX/TV” will be used as the TV audio setting for VIERA Link “HDAVI

Control”.

≥ Set “VIERA Link” to “ON” (B 16, HDMI menu).

≥ To complete and activate the connection correctly, turn on all VIERA

Link “HDAVI Control” compatible equipment and set the TV to the

corresponding HDMI input mode for this unit.

Whenever the connection or settings are changed, reconfirm the points

above.

(Available when using VIERA Link “HDAVI Control” with

“HDAVI Control 3 or later” compatible TV)

This function automatically provides synchronised audio and video

output. (This works only when the source is “DVD/CD” or “AUX/TV”.)

≥ When using “DVD/CD” as the source, set “TIME DELAY” in VIDEO

menu to “0 ms/AUTO” (B 15).

(Continued on next page)

TRANSFER MODE

If you have chosen “480p”/“576p”/“720p”/“1080p” (progressive), “1080i”

(interlaced) [“VIDEO FORMAT” in Menu 4 (HDMI)], select the method of

conversion for progressive output to suit the type of material.

≥ The setting will return to “AUTO” or “AUTO1” when the disc tray is

opened, the unit is turned off or another source is selected.

When playing PAL discs

AUTO:

VIDEO:

FILM:

Automatically detects the film and video content, and

appropriately converts it.

Select when using “AUTO”, and the content is distorted.

Select this if the edges of the film

content appear jagged or rough when

“AUTO” is selected.

However, if the video content is

distorted as shown in the illustration

to the right, then select “AUTO”.

When playing NTSC discs

AUTO1:

AUTO2:

VIDEO:

Automatically detects the film and video content, and

appropriately converts it.

In addition to “AUTO1”, automatically detects film

contents with different frame rates and appropriately

converts it.

Select if the video content is distorted when using

“AUTO1” or “AUTO2”.

SOURCE SELECT [DivX]

When you select “AUTO” the constructing method of the DivX contents

is automatically distinguished and output. If the picture is distorted,

select “INTERLACE” or “PROGRESSIVE” depending on which

constructing method was used when the contents were recorded to disc.

AUTO, INTERLACE, PROGRESSIVE

Menu 3 (Audio)

DIALOGUE ENHANCER

To make the dialogue in movies easier to hear

[DVD-V] (Dolby Digital, DTS, 3-channel or higher, with the dialogue

recorded in the center channel)

[DivX] (Dolby Digital, 3-channel or higher, with the dialogue recorded in

the center channel)

OFF, ON

Menu 4 (HDMI)

HDMI STATUS

To show HDMI information

e.g.

1 Connection status

2 Shows the output signal type.

(When “OFF” is selected in “AUDIO OUT” (B 16, HDMI menu),

“– – –” will be displayed.)

3 Shows the number of audio channels.

4 (B right, VIDEO FORMAT)

5 (B right, COLOUR SPACE)

HD ENHANCER

This works when the HDMI connection is being used with “VIDEO

PRIORITY” (B 16, HDMI menu) set to “ON”.

To sharpen the “720p”, “1080i” and “1080p” picture quality

OFF, 1 (weakest) to 3 (strongest)

HDMI

HDMI --- INFORMATION

CONNECTED STATE

AUDIO STREAM

MAX CHANNEL

VIDEO FORMAT

COLOUR SPACE

CONNECTED

PCM

2ch

720p

YCbCr 4:4:4











VIDEO FORMAT

This works when the HDMI connection is being used with “VIDEO

PRIORITY” (B 16, HDMI menu) set to “ON”.

To select suitable picture quality with your TV

(Video recordings will be converted to, and output as, high-definition

video.)

480p/576p/720p/1080p (progressive)

480i/576i/1080i (interlaced)

≥ If the picture is distorted, press and hold [CANCEL]F until the picture

is displayed correctly. (The output will return to “480p”/“576p”.)

The numbers displayed depend on the disc being played. One of

the above numbers is displayed.

COLOUR SPACE

This works when the HDMI connection is being used with “VIDEO

PRIORITY” (B 16, HDMI menu) set to “ON”.

To select suitable picture colour with your TV

YCbCr 4:2:2

YCbCr 4:4:4

RGB

≥ If the setting above is not compatible with your TV, it will not be

displayed.

Auto lip sync

SC-PT70EP-RQTX1024-Z_eng.book Page 13 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

You can turn on this unit and the TV, and start playing the disc with a

single press of a button.

[Note]

Playback may not be immediately displayed on the TV. If you miss the

beginning portion of playback, press [:]5 or [6]5 to go back to

where playback started.

≥ When you switch the TV input to TV tuner mode, this unit will

automatically switch to “AUX/TV”.

≥ When this unit is in “DVD/CD” mode, the TV will automatically switch its

input mode for this unit.

≥ When playback stops ([DVD-V] [VCD]) or when this unit turns off, the TV

will automatically return to TV tuner mode.

≥ When you select

“AUX/TV”

from “Input Selection” in START menu (B 9),

the TV will automatically switch to TV tuner mode.

When the TV is turned off, this unit goes into standby mode automatically.

To continue audio playback even when the TV is turned off, select

“VIDEO” (B 16, “POWER OFF LINK” in HDMI menu).

[Note]

≥ When you press [Í]1, only this unit turns off. Other connected

equipment compatible with VIERA Link “HDAVI Control” stays on.

≥ If this unit is connected to a “HDAVI Control 4” compatible TV with the

“Intelligent Auto Standby” setting activated on the TV, the main unit will

be automatically turned to standby under the following conditions:

e.g.,

For details, refer also to the operating instructions for your TV.

You can select whether audio is output from this unit’s speakers or the TV

speakers by using the TV menu settings. For details, refer to the

operating instructions for your TV.

Home Cinema

This unit’s speakers are active.

≥ When you turn on this unit, this unit’s speakers will be automatically

activated.

≥ When this unit is in standby mode, changing the TV speakers to this

unit’s speakers in the TV menu will automatically turn this unit on and

select “AUX/TV” as the source.

≥ The TV speakers are automatically muted.

≥ You can control the volume setting using the volume or mute button on

the TV’s remote control. (The volume level is displayed on the main

unit’s display.)

≥ To cancel muting, you can also use this unit’s remote control (B 4).

≥ If you turn off this unit, TV speakers will be automatically activated.

TV speakers are active.

≥ The volume of this unit is set to “0”.

– This function works only when “DVD/CD” or “AUX/TV” is selected as

the source on this unit.

≥ Audio output is 2-channel audio.

When switching between this unit speakers and TV speakers, the TV

screen may be blank for several seconds.

You can control the playback menus of this unit with the TV’s remote

control. When operating the TV’s remote control, refer to the below

illustration for operation buttons.

You can operate the playback with the indicated controls.

≥ The on-screen control panel can also be shown by using a button on the

TV’s remote control (e.g. [OPTION]).

– This works only during “DVD/CD” playback and resume modes.

If the TV has automatically switched to the HDMI input mode for this

unit (B left, Auto input switching)

The TV will automatically switch to TV tuner mode when:

– you press [EXIT] button on the TV’s remote control.

– you press [EXIT] or [RETURN] button on the TV’s remote control to exit

the START menu.

This does not work during playback or resume mode when “DVD/CD” is

selected as the source.

[Note]

≥ Depending on the menu, some button operations cannot be performed

from the TV’s remote control.

≥ You cannot input numbers with the numbered buttons on the TV’s

remote control ([0] to [9]). Use this unit’s remote control to select the

play list etc.

Playing from MUSIC PORT

The MUSIC PORT allows you to connect and enjoy music from an

external music device (e.g. MP3 player) through your home theater

system.

Preparation

≥ To avoid distorted sound, make sure that any equalizer function of your

external device is turned off.

≥ Reduce the volume of the main unit and external music device.

Adjust the volume on the external music device to a normal listening level,

and then adjust the volume of the main unit.

One touch play

(Remote control only)

During standby mode, press [

PLAY]

to start disc playback.

This unit’s speakers will be automatically activated (B below).

Auto input switching

Power off link

– when changing the TV input from the one the main unit is

connected to

– when changing the speaker use from this unit’s speakers to the

TV speakers

Speaker control

VIERA Link Control only with TV’s remote control

(for “HDAVI Control 2 or later”)

1 Select this unit’s operation menu by using the TV menu settings.

(For details, refer to the operating instructions for your TV.)

The START menu will be shown.

e.g. [DVD-V]

≥ The START menu can also be shown by using a button on the TV’s

remote control (e.g. [OPTION]).

– When “DVD/CD” is selected as the source, the TV’s remote control

works only during stop mode.

2 Select the desired item on the START menu (B 9).

When the on-screen control panel appears

e.g. [DVD-V] (when “Playback Disc” is selected from the START menu.)

Connect the external music device (not included) to the

MUSIC PORT5.

Plug type: ‰3.5 mm stereo mini plug

Press [EXT-IN]@ to select “MUSIC P.”.

DVD/CD Home Cinema

Input Selection

Sound

Playback Disc

TOP MENU (DVD)

MENU (DVD)

Playback/menu access

SC-PT70EP-RQTX1024-Z_eng.book Page 14 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Changing the player settings

≥ The settings remain intact even if you switch the unit to standby.

≥ Underlined items are the factory settings in the following menus.

§1

The original language designated on the disc is selected.

§2

Input the appropriate code from the language code list (B 4).

§3

If the language selected for “AUDIO” is not available, subtitles appear

in that language (if available on the disc).

RATINGS

Set a rating level to limit DVD-Video play.

Setting ratings (When level 8 is selected)

≥ 0 LOCK ALL: To prevent play of discs without rating levels.

≥ 1 to 7

≥ 8 NO LIMIT

When you select your ratings level, a password screen is shown.

Follow the on-screen instructions.

Do not forget your password.

A message screen will be shown if a DVD-Video disc exceeding the rating

level is inserted in the unit.

Follow the on-screen instructions.

PASSWORD

Change the password for “RATINGS”.

≥ SETTING

To change ratings (When level 0 to 7 is selected)

≥ CHANGE: Follow the on-screen instructions.

VIDEO OUT – SCART

Choose the video signal format to be output from the SCART (AV)

terminal.

≥ VIDEO

≥ S-VIDEO

≥ RGB 1: (Only when connected to a RGB compatible TV)

If you always would like to view the picture from the unit in RGB signal,

select this mode. The TV screen will automatically switch to display the

picture from the unit when the unit is turned on.

≥ RGB 2: (Only when connected to a RGB compatible TV)

When in TV tuner mode, if the selector is set to “DVD/CD”, the TV screen

will automatically switch to display the picture from the unit only during disc

playback (

[DVD-V]

[DVD-VR]

[VCD]

) or when viewing on-screen menu of

DVD/CD.

The TV picture will be displayed when the selector is set to “AV”. With

other selectors, the picture from this unit will be displayed.

Select to suit the type of equipment you connected to the HDMI AV OUT

terminal.

Select “BITSTREAM” when the equipment can decode the bitstream

(digital form of 5.1-channel data). Otherwise, select “PCM”.

(If the bitstream is output to the equipment without a decoder, high levels

of noise can be output and may damage your speakers and hearing.)

DOLBY DIGITAL

DTS

MPEG

When audio is output from HDMI AV OUT terminal, and the

connected equipment does not support the item selected, the actual

output will depend on the performance of this connected equipment.

(Continued on next page)

Press [SETUP]; to show the setup menu.

Press [3, 4]9 to select the menu and press [OK]9.

≥ To return to the previous screen, press [RETURN]E.

Press [3, 4]9 to select the item and press [OK]9.

Press [3, 4]9 to make the settings and press [OK]9.

Press [SETUP]; to exit.

DISC menu

AUDIO

Choose the audio language.

≥ ENGLISH

≥ FRENCH ≥ SPANISH ≥ GERMAN

≥ RUSSIAN ≥HUNGARIAN ≥ CZECH ≥ POLISH

≥ ORIGINAL

§1

≥ OTHER – – – –

§2

SUBTITLE

Choose the subtitle language.

≥ AUTO

§3

≥ ENGLISH ≥ FRENCH ≥ SPANISH

≥ GERMAN ≥ RUSSIAN ≥HUNGARIAN ≥ CZECH

≥ POLISH ≥ OTHER – – – –

§2

MENUS

Choose the language for disc menus.

≥ ENGLISH

≥ FRENCH ≥ SPANISH ≥ GERMAN

≥ RUSSIAN ≥HUNGARIAN ≥CZECH ≥ POLISH

≥ OTHER – – – –

§2

SET

MAIN

DISC

VIDEO

AUDIO

DISPLAY

HDMI

OTHERS

EXIT : SETUP

RETURN

SET

RETURN

DISC

EXIT : SETUP

SETTING STATE

AUDIO

SUBTITLE

MENUS

RATINGS

PASSWORD

ENGLISH

AUTO

ENGLISH

8 NO LIMIT

Item

Setting

Display the current setting

of the items below

VIDEO menu

TV ASPECT

Choose the setting to suit your TV.

≥ 16:9

: Widescreen TV (16:9)

≥ 4:3PAN&SCAN: Regular aspect TV (4:3)

The sides of the widescreen picture are cut off so it

fills the screen (unless prohibited by the disc).

≥ 4:3LETTERBOX: Regular aspect TV (4:3)

Widescreen picture is shown in the letterbox style.

TIME DELAY

When connected with a Plasma display, adjust if you notice the audio is

out of sync with the video.

≥ 0 ms/AUTO

≥ 20 ms ≥ 40 ms ≥ 60 ms

≥ 80 ms ≥ 100 ms

When using VIERA Link “HDAVI Control” with “HDAVI Control 3 or later”

compatible TV (B 13), select “0 ms/AUTO”.

Audio and video will automatically be set in sync.

NTSC DISC OUT

Choose PAL 60 or NTSC output when playing NTSC discs (B 18, Video

systems).

≥ NTSC: When connected to an NTSC TV.

≥ PAL60

: When connected to a PAL TV.

STILL MODE

Specify the type of picture shown when paused.

≥ AUTO

≥ FIELD: The picture is not blurred, but picture quality is lower.

≥ FRAME: Overall quality is high, but the picture may appear blurred.

AUDIO menu

≥BITSTREAM ≥PCM

≥BITSTREAM

≥PCM

≥BITSTREAM ≥PCM

DYNAMIC RANGE

≥ ON: Adjusts for clarity even when the volume is low. Convenient for

late night viewing. (Only works with Dolby Digital)

≥ OFF

SC-PT70EP-RQTX1024-Z_eng.book Page 15 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

REGISTRATION [DivX]

Display the unit’s registration code.

≥ SHOW CODE

You need this registration code to purchase and play DivX Video-on-

Demand (VOD) content (B 17).

JPEG TIME

Set the speed of the slideshow.

Factory preset: 3 SEC

≥ 1 SEC to 15 SEC (in 1-unit steps)

≥ 15 SEC to 60 SEC (in 5-unit steps)

≥ 60 SEC to 180 SEC (in 30-unit steps)

DEFAULTS

This returns all values in the MAIN menu to the default settings.

≥ RESET

The password screen is shown if “RATINGS” (B 15) is set. Please enter

the same password, then turn the unit off and on again.

SPEAKER SETTINGS

Select the delay time of the speakers.

[Effective only when “5.1ch layout” mode is selected in “Speakers

position” (B 8, Easy setup settings) and playing 5.1-channel sound.]

(Center and surround speakers only)

For optimum listening with 5.1-channel sound, all the speakers, except for

the subwoofer, should be the same distance from the seating position.

If you have to place the center or surround speakers closer to the seating

position, adjust the delay time to make up for the difference.

If either distance a or b is less than c, find the difference in the table

and change to the recommended setting.

a Center speaker b Surround speaker

Difference (Approx.) Setting Difference (Approx.) Setting

30 cm 1ms 150 cm 5ms

60 cm 2ms 300 cm 10ms

90 cm 3ms 450 cm 15ms

120 cm 4ms

150 cm 5ms

≥ SETTINGS:

≥ C DELAY (Center Delay):

0ms

, 1ms, 2ms, 3ms, 4ms, 5ms

Select the delay time for your center speaker.

≥ LS/RS DELAY (Left Surround/Right Surround Delay):

0ms

, 5ms, 10ms, 15ms

Select the delay time for your surround speakers.

≥ TEST TONE: SETTING

Use the test tone for speaker level adjustments (B 10, Adjusting

the speaker output level manually).

DISPLAY menu

LANGUAGE

Choose the language for the on-screen messages.

≥ ENGLISH

≥ FRANÇAIS ≥ ESPAÑOL ≥DEUTSCH

≥ PУCCKИЙ ≥ MAGYAR ≥ ÇESKY ≥ POLSKI

HDMI menu

VIDEO PRIORITY

≥ ON: When using the HDMI AV OUT terminal for video output. The

resolution of the video output from the HDMI AV OUT terminal is

optimized according to the capability of the connected

equipment (e.g. TV).

≥ OFF: When not using the HDMI AV OUT terminal for video output.

Video output will not depend on the connected equipment, but

on this unit.

AUDIO OUT

≥ ON: When audio output is from the HDMI AV OUT terminal.

(Depending on the capabilities of the connected equipment,

audio output may differ from the audio settings of the main unit.)

≥ OFF

: When audio output is not from the HDMI AV OUT terminal. (The

audio is output using the settings of the main unit.)

RGB RANGE

This works only when “COLOUR SPACE” in Menu 4 (HDMI) is set to RGB

(B 13).

≥ STANDARD

≥ ENHANCED: When the black and white images are not distinct.

VIERA Link

≥ ON: The VIERA Link “HDAVI Control” function is available (B 13).

≥ OFF











: Actual speaker position

: Ideal speaker position

: Primary listening

distance

Approximate room dimensions

Circle of constant primary listening distance

POWER OFF LINK

Select the desired power off link setting of this unit for VIERA Link operation

14). (This works depending on the settings of the connected

VIERA Link

“HDAVI Control”

compatible equipment.)

≥ VIDEO/AUDIO: When the TV is turned off, this unit will turn off

automatically.

≥ VIDEO: When the TV is turned off, this unit will turn off except during the

following conditions:

– audio playback ([CD] [MP3] [WMA])

– radio mode

OTHERS menu

FL DIMMER

Change the brightness of the unit’s display.

≥ BRIGHT

≥ DIM: The display is dimmed.

≥ AUTO: The display is dimmed, but brightens when you perform

some operations.

EASY SETUP

≥ SET (B 8)

DVD-VR/DATA

Select to play only DVD-VR or DATA format.

≥ DVD-VR

: To play the video programs on DVD-R/-RW.

≥ DATA: To play the data files on DVD-R/-RW.

SCREEN DIMMER

This is to prevent burn marks on the TV screen.

≥ OFF

≥ WAIT 5 MIN

: If there is no operation for 5 minutes, the picture turns

grey. The TV screen will resume when you perform some

operations. (This does not work during video playback.)

SC-PT70EP-RQTX1024-Z_eng.book Page 16 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

DivX information

ABOUT DIVX VIDEO-ON-DEMAND:

This DivX

Certified device must be registered in order to play DivX

Video-on-Demand (VOD) content.

First generate the DivX VOD registration code for your device and submit

it during the registration process. [Important: DivX VOD content is

protected by a DivX DRM (Digital Rights Management) system that

restricts playback to registered DivX Certified devices. If you try to play

DivX VOD content not authorized for your device, the message

“AUTHORIZATION ERROR” will be displayed and your content will not

play.]

Learn more at www.divx.com/vod.

Display the unit’s registration code

(B 16, “REGISTRATION” in OTHERS menu)

≥ We recommend that you make a note of this code for future reference.

≥ After playing DivX VOD content for the first time, another registration

code is then displayed in “REGISTRATION (DIVX)”. Do not use this

registration code to purchase DivX VOD content. If you use this code to

purchase DivX VOD content, and then play the content on this unit, you

will no longer be able to play any content that you purchased using the

previous code.

Regarding DivX content that can only be played a set

number of times

Some DivX VOD content can only be played a set number of times. When

you play this content, the remaining number of plays is displayed.

You cannot play this content when the number of remaining plays is zero.

(“RENTAL EXPIRED” is displayed.)

When playing this content

≥ The number of remaining plays is reduced by one if

– you press [Í]1 or [SETUP];.

– you press [∫ STOP]5.

– you press [:, 9 SKIP]5 or [6, 5 SEARCH]5 etc. and

arrive at another content.

Resume function (B 10, Stop: [∫ STOP]5) does not work.

You can display subtitles text recorded onto the DivX video disc on this unit.

Depending on the methods used to create the file, the following functions

may not work, or the subtitles may not be displayed correctly.

1 During play, select “SUBTITLE” in Menu 1 (B 12).

2 Press [3, 4]9 to select “TEXT ON” and press [OK]9.

≥DivX video files that do not display “TEXT ON” do not contain

subtitles text. Subtitles text cannot be displayed.

≥If the subtitles text are not displayed correctly, try changing the

language settings (B below).

Subtitles text language settings

[Only when “LANGUAGE” in DISPLAY menu is set to “ENGLISH” (B 16).]

1 During play, press [SETUP];.

2 Press [3, 4]9 to select “DISC” and press [OK]9.

3 Press [3, 4]9 to select “SUBTITLE TEXT” and press [OK]9.

4 Press [3, 4]9 to select “LATIN1”, “LATIN2” (factory setting),

“CYRILLIC” or “TURKISH” and press [OK]9.

≥To exit the screen, press [SETUP];.

Types of subtitles text file that can be displayed

Subtitles text that satisfy the following conditions can be displayed on this

unit.

≥ File format: MicroDVD, SubRip, or TMPlayer

≥ File extension: “.SRT”, “.srt”, “.SUB”, “.sub”, “.TXT”, or “.txt”

≥ File name: No more than 44 characters excluding the file extension

≥ The DivX video file and subtitles text file are inside the same folder, and

the file names are the same except for the file extensions.

≥ If there are more than one subtitles text files inside the same folder, they

are displayed in the following order of priority: “.srt”, “.sub”, “.txt”.

[Note]

≥ If the file name of the DivX video file is not displayed correctly on the

menu screen (the file name is displayed as “¢”), or the file size exceeds

256 KB, the subtitles text may not be displayed correctly.

≥ The subtitles text cannot be displayed during menu display or when

operations such as search are being performed.

Speaker installation option

You can attach all of the speakers (except subwoofer) to a wall.

≥ The wall or pillar on which the speakers are to be attached should be

capable of supporting 10 kg per screw. Consult a qualified building

contractor when attaching the speakers to a wall. Improper attachment

may result in damage to the wall and speakers.

Licenses

Displaying DivX subtitles text

SET

OTHERS−REGISTRATION (DIVX)

DIVX (R) VIDEO ON DEMAND

YOUR REGISTRATION CODE IS

XXXXXXXX

TO LEARN MORE VISIT

www.divx.com/vod

8 alphanumeric characters

Attaching to a wall

1 Drive a screw (not included) into the wall.

2 Fit the speaker securely onto the screw(s) with the hole(s).

Manufactured under license from Dolby Laboratories.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby

Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942;

5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and

worldwide patents issued & pending. DTS and DTS Digital Surround

are registered trademarks and the DTS logos and Symbol are

U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132; and

5,583,936.

This product incorporates copyright protection technology that is

protected by U.S. patents and other intellectual property rights. Use of

this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

HDAVI Control

is a trademark of Panasonic Corporation.

Windows Media and the Windows logo are trademarks or registered

trademarks of Microsoft Corporation in the United States and/or other

countries.

This product is protected by certain intellectual property rights of

Microsoft Corporation and third parties. Use or distribution of such

technology outside of this product is prohibited without a license from

Microsoft or an authorized Microsoft subsidiary and third parties.

This product is licensed under the MPEG-4 Visual patent portfolio

license for the personal and non-commercial use of a consumer for (i)

encoding video in compliance with the MPEG-4 Visual Standard

(“MPEG-4 Video”) and/or (ii) decoding MPEG-4 Video that was

encoded by a consumer engaged in a personal and non-commercial

activity and/or was obtained from a video provider licensed by MPEG

LA to provide MPEG-4 Video. No license is granted or shall be implied

for any other use. Additional information including that relating to

promotional, internal and commercial uses and licensing may be

obtained from MPEG LA, LLC. See http://www.mpegla.com

Plays DivX

video

DivX

is a registered trademark of DivX, Inc., and is used under license.

At least 30 mm

Wall or pillar

4.0 mm



7.0 mm to 9.0 mm



3 mm to 5 mm

SC-PT70EP-RQTX1024-Z_eng.book Page 17 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Discs that can be played

Commercial discs

Recorded discs

≥ Before playback, finalize the disc on the device it was recorded on.

≥ It may not be possible to play all the above-mentioned discs in some

cases due to the type of disc, the condition of the recording, the

recording method, or how the files were created (B right, Tips for

making data discs).

Blu-ray, HD DVD, AVCHD discs, DVD-RW version 1.0, DVD-Audio,

DVD-ROM, CD-ROM, CDV, CD-G, SACD, Photo CD, DVD-RAM, and

“Chaoji VCD” available on the market including CVD, DVCD and SVCD

that do not conform to IEC62107.

≥ This unit can play PAL and NTSC, but your TV must match the system

used on the disc.

≥ PAL discs cannot be correctly viewed on an NTSC TV.

≥ This unit can convert NTSC signals to PAL 60 for viewing on a PAL TV

(B 15, “NTSC DISC OUT” in VIDEO menu).

≥ Do not attach labels or stickers to discs. This may cause disc warping,

rendering it unusable.

≥ Do not write on the label side with a ball-point pen or other writing

instrument.

≥ Do not use record cleaning sprays, benzine, thinner, liquids which

prevent static electricity, or any other solvent.

≥ Do not use scratch-proof protectors or covers.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed stickers or labels (rented

discs, etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

≥ There may be differences in the display order on the menu screen and

computer screen.

≥ This unit cannot play files recorded using packet write.

DVD-R/RW

≥ Discs must conform to UDF bridge (UDF 1.02/ISO9660).

≥ This unit does not support multi-session. Only the default session is

played.

CD-R/RW

≥ Discs must conform to ISO9660 level 1 or 2 (except for extended

formats).

≥ This unit supports multi-session but if there are many sessions it takes

more time for play to start. Keep the number of sessions to a minimum

to avoid this.

Type of media/

Logo

Remarks Indicated as

DVD-Video High quality movie and

music discs

[DVD-V]

Video CD Music discs with video

Including SVCD

(Conforming to IEC62107)

[VCD]

CD Music discs [CD]

Type of media/

Logo

Formats Indicated as

DVD-R/RW ≥ DVD-Video Format

≥ Version 1.1 of the DVD

Video Recording Format

≥ MP3 format

≥ JPEG format

≥ DivX format

≥ MPEG4

[DVD-V]

[DVD-VR]

[MP3]

[JPEG]

[DivX]

[MPEG4]

DVD-R DL ≥ DVD-Video Format

≥ Version 1.2 of the DVD

Video Recording Format

≥ DivX format

[DVD-V]

[DVD-VR]

[DivX]

rR/rRW/rRDL ≥ +VR (+R/+RW Video

Recording) Format

[DVD-V]

CD-R/RW ≥ MP3 format

≥ JPEG format

≥ DivX format

≥ MPEG4

≥ WMA

[MP3]

[JPEG]

[DivX]

[MPEG4]

[WMA]

Note about using a DualDisc

The digital audio content side of a DualDisc does not meet the technical

specifications of the Compact Disc Digital Audio (CD-DA) format so

playback may not be possible.

Discs that cannot be played

Video systems

Disc handling precautions

Tips for making data discs

[WMA] (Extension: “.WMA”, “.wma”)

Disc: CD-R/RW

≥ Compatible compression rate: between 48 kbps and 320 kbps

≥ You cannot play WMA files that are copy-protected.

[MP3] (Extension: “.MP3”, “.mp3”)

Disc: DVD-R/RW, CD-R/RW

≥ This unit does not support ID3 tags.

≥ Sampling frequency and compression rate:

– DVD-R/RW: 11.02, 12, 22.05, 24 kHz (8 to 160 kbps), 44.1 and

48 kHz (32 to 320 kbps)

– CD-R/RW: 8, 11.02, 12, 16, 22.05, 24 kHz (8 to 160 kbps), 32, 44.1

and 48 kHz (32 to 320 kbps)

[JPEG] (Extension: “.JPG”, “.jpg”, “.JPEG”, “.jpeg”)

Disc: DVD-R/RW, CD-R/RW

≥ JPEG files taken on a digital camera that conform to DCF Standard

(Design rule for Camera File system) Version 1.0 are displayed.

– Files that have been altered, edited or saved with computer picture

editing software may not be displayed.

≥ This unit cannot display moving pictures, MOTION JPEG and other

such formats, still pictures other than JPEG (e.g. TIFF), or play

pictures with attached audio.

[MPEG4] (Extension: “.ASF”, “.asf”)

Disc: DVD-R/RW, CD-R/RW

≥ The recording date may differ from that of the actual date.

[DivX] (Extension: “.DIVX”, “.divx”, “.AVI”, “.avi”)

Disc: DVD-R/RW, CD-R/RW

≥ DivX files greater than 2 GB or have no index may not be played

properly on this unit.

≥ This unit supports all resolutions up to maximum of 720k480

(NTSC)/720k576 (PAL).

≥ You can select up to 8 types of audio and subtitles on this unit.

SC-PT70EP-RQTX1024-Z_eng.book Page 18 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Specifications

§8

Rating with Low-cut filter equipped Amplifier

[Note]

1 Specifications are subject to change without notice.

Mass and dimensions are approximate.

2 Total harmonic distortion is measured by a digital spectrum analyzer.

AMPLIFIER SECTION

RMS Output Power: Dolby Digital Mode

Front Ch

Surround Ch

Center Ch

Subwoofer Ch

55 W per channel (5 ≠), 1 kHz, 10 % THD

55 W per channel (5 ≠), 100 Hz, 10 % THD

Total RMS Dolby Digital mode power 330 W

FM TUNER, TERMINALS SECTION

Preset Memory FM 30 stations

Frequency Modulation (FM)

Frequency range 87.50 MHz to 108.00 MHz (50-kHz step)

Antenna terminals 75 ≠ (unbalanced)

Music Port (Front)

Sensitivity 100 mV, 6.8 k≠

Terminal Stereo, 3.5 mm jack

DISC SECTION

Discs played (8 cm or 12 cm)

(1) DVD (DVD-Video, DivX

§5, 6

)

(2) DVD-R (DVD-Video, DVD-VR, MP3

§2, 5

, JPEG

§4, 5

, MPEG4

§5, 7

DivX

§5, 6

)

(3) DVD-R DL (DVD-Video, DVD-VR, DivX

§5, 6

)

(4) DVD-RW (DVD-Video, DVD-VR, MP3

§2, 5

, JPEG

§4, 5

, MPEG4

§5, 7

DivX

§5, 6

)

(5) iR/iRW (Video)

(6) iR DL (Video)

(7) CD, CD-R/RW (CD-DA, Video CD, SVCD

§1

, MP3

§2, 5

, WMA

§3, 5

JPEG

§4, 5

, MPEG4

§5, 7

, DivX

§5, 6

)

§1

Conforming to IEC62107

§2

MPEG-1 Layer 3, MPEG-2 Layer 3

§3

Windows Media Audio Ver.9.0 L3

Not compatible with Multiple Bit Rate (MBR)

§4

Exif Ver 2.1 JPEG Baseline files

Picture resolution: between 160k120 and 6144k4096 pixels (Sub

sampling is 4:0:0, 4:2:0, 4:2:2 or 4:4:4). Extremely long and narrow

pictures may not be displayed.

§5

The total combined maximum number of recognizable audio,

picture and video contents and groups: 4000 audio, picture and

video contents and 255 groups. (Excluding Root folder)

§6

Plays DivX

video.

§7

MPEG4 data recorded with Panasonic SD multi cameras or DVD

video recorders

Conforming to SD VIDEO specifications (ASF standard)/MPEG4

(Simple Profile) video system/G.726 audio system

Pick up

Wavelength (DVD/CD) 650/790 nm

Laser power (DVD/CD) CLASS 1M/CLASS 1M

Audio output (Disc)

Number of channels 5.1 ch (FL, FR, C, SL, SR, SW)

VIDEO SECTION

Video system PAL625/50, PAL525/60, NTSC

Composite video output

Output level

Terminal

1Vp-p (75≠)

Scart jack (1 system)

S-video output

Y output level

C output level

Terminal

1Vp-p (75≠)

PAL; 0.3 Vp-p (75 ≠)

NTSC; 0.286 Vp-p (75 ≠)

Scart jack (1 system)

RGB video output

R output level

G output level

B output level

Terminal

0.7 Vp-p (75 ≠)

Scart jack (1 system)

HDMI AV output

Terminal 19-pin type A connector

HDAVI Control This unit supports “HDAVI Control 4” function.

SPEAKER SECTION

[Front\speakers\SB-HF70]

Type

Speaker unit(s)

1 way, 1 speaker system (Bass reflex)

Impedance 5 ≠

Full range 6.5 cm Cone type

Input power (IEC)

Output sound pressure

Frequency range

Dimensions (WtHtD)

Mass

55 W

§8

(Max)

80 dB/W (1.0 m)

100 Hz to 25 kHz (j16 dB)

150 Hz to 22 kHz (j10 dB)

80 mmk119 mmk68 mm

0.32 kg

[Surround\speakers\SB-HS70]

Type

Speaker unit(s)

1 way, 1 speaker system (Bass reflex)

Impedance 5 ≠

Full range 6.5 cm Cone type

Input power (IEC)

Output sound pressure

Frequency range

Dimensions (WtHtD)

Mass

55 W

§8

(Max)

80 dB/W (1.0 m)

100 Hz to 25 kHz (j16 dB)

150 Hz to 22 kHz (j10 dB)

80 mmk119 mmk68 mm

0.32 kg

[Center\speaker\SB-HC70]

Type

Speaker unit(s)

1 way, 1 speaker system (Bass reflex)

Impedance 5 ≠

Full range 6.5 cm Cone type

Input power (IEC)

Output sound pressure

Frequency range

Dimensions (WtHtD)

Mass

55 W

§8

(Max)

80 dB/W (1.0 m)

100 Hz to 25 kHz (j16 dB)

150 Hz to 22 kHz (j10 dB)

80 mmk119 mmk68 mm

0.39 kg

[Subwoofer\SB-HW70]

Type

Speaker unit(s)

1 way, 1 speaker system (Bass reflex)

Impedance 5 ≠

Woofer 12 cm Cone type

Input power (IEC)

Output sound pressure

Frequency range

Dimensions (WtHtD)

Mass

55 W (Max)

79 dB/W (1.0 m)

35 Hz to 350 Hz (j16 dB)

40 Hz to 200 Hz (j10 dB)

130 mmk278 mmk230 mm

2.2 kg

GENERAL

Power supply

Power consumption

Dimensions (WtHtD)

Mass

Operating temperature range

Operating humidity range

AC 220 V to 240 V, 50 Hz

Main unit 47 W

360 mmk58 mmk239 mm

Main unit 2.0 kg

0 oC to r40 oC

35 % to 80 % RH (no condensation)

Power consumption in standby mode approx. 0.48 W

SC-PT70EP-RQTX1024-Z_eng.book Page 19 Thursday, August 20, 2009 10:19 AM

RQTX1024

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt

about some of the check points, or if the solutions indicated in the

following guide do not solve the problem, consult your dealer for

instructions.

No power.

Insert the AC mains lead securely. (B 7)

The unit is automatically switched to standby mode.

The Sleep timer was working and had reached the set time limit. (B 4)

The display is dark.

Select “BRIGHT” in “FL DIMMER” in the OTHERS menu. (B 16)

“NO PLAY”

≥ You inserted a disc the unit cannot play; insert one it can. (B 18)

≥ You inserted a blank disc.

≥ You inserted a disc that has not been finalized.

“NO DISC”

≥ You have not inserted a disc; insert one.

≥ You have not inserted the disc correctly; insert it correctly. (B 10)

“F61”

Check and correct the speaker cable connections. If this does not fix the

problem, consult the dealer. (B 6)

“F76”

There is a power supply problem. Consult the dealer.

“DVD U11”

Disc may be dirty. Wipe it clean.

“ERROR”

Incorrect operation performed. Read the instructions and try again.

“DVD H∑∑”

“DVD F∑∑∑”

∑ stands for a number.

≥ Trouble may have occurred. The numbers following “H” and “F” depend

on the status of the unit. Turn the unit off and then back on.

Alternatively, turn the unit off, disconnect the AC mains lead, and then

reconnect it.

≥ If the service numbers fail to clear, note the service number and contact

a qualified service person.

“U70∑”

∑ stands for a number. (The actual number following “U70” will depend on

the state of the main unit.)

≥ The HDMI connection acts unusually.

– The connected equipment is not HDMI-compatible.

– Please use HDMI cables that have the HDMI logo (as shown on the

cover).

– The HDMI cable is too long.

– The HDMI cable is damaged.

“REMOTE 1” or “REMOTE 2”

Match the modes on the main unit and remote control. Depending on the

number being displayed (“1” or “2”), press and hold [OK] and the

corresponding numbered button ([1] or [2]) for at least 2 seconds. (B 4)

No response when any buttons are pressed.

≥ This unit cannot play discs other than the ones listed in these operating

instructions. (B 18)

≥ The unit may not be operating properly due to lightning, static electricity

or some other external factor. Turn the unit off and then back on.

Alternatively, turn the unit off, disconnect the AC mains lead, and then

reconnect it.

≥ Condensation has formed. Wait 1 to 2 hours for it to evaporate.

No response when remote control buttons are pressed.

≥ Check that the batteries are installed correctly. (B 7)

≥ The batteries are depleted. Replace them with new ones. (B 7)

≥ Aim the remote control at the remote control signal sensor and operate.

(B 4)

Other products respond to the remote control.

Change the remote control operating mode. (B 4)

No picture or sound.

≥ Check the video or speaker connection. (B 6, 7)

≥ Check the power or input setting of the connected equipment and the

main unit.

≥ Check that the disc has something recorded on it.

You have forgotten your ratings password.

Reset all the settings to Factory Preset.

While stopped and “DVD/CD” is the source, press and hold [∫]7 (Stop)

on the main unit and [S10]3 on the remote control until “INITIALIZED”

disappears from the TV. Turn the unit off and on again.

All settings will return to the default values.

(This does not work during program and random modes, or when setup

menu or START menu is displayed.)

Some characters are not displayed correctly.

Characters other than English alphabet and Arabic numerals may not be

displayed correctly.

The VIERA Link “HDAVI Control” function does not

respond.

Depending on the condition of this unit or the connected equipment, it

may be necessary to repeat the same operation so that the function can

work correctly. (B 13)

The setting you made in “TV ASPECT” (B 15, VIDEO menu)

or “LANGUAGE” (B 16, DISPLAY menu) does not work.

The settings for “TV ASPECT”

§1

and “LANGUAGE”

§2

will automatically

follow the information from the TV. (B 8, Easy setup settings)

§1

When using VIERA Link “HDAVI Control” with “HDAVI Control 3 or

later” compatible TV

§2

When using VIERA Link “HDAVI Control” with “HDAVI Control 2 or

later” compatible TV

It takes time before play starts.

≥ Play may take time to begin when an MP3 track has still picture data.

Even after the track starts, the correct play time will not be displayed.

This is normal. [MP3]

≥ This is normal on DivX video. [DivX]

A menu screen appears during skip or search. [VCD]

This is normal for Video CDs.

Playback control menu does not appear.

[VCD] with playback control

Press [∫ STOP]5 twice and then press [1 PLAY]5.

Program and Random play do not work. [DVD-V]

These functions do not work with some DVD-Videos.

Play does not start.

≥ This unit may not play WMA and MPEG4 that contains still picture data.

≥ If playing DivX VOD content, refer to the homepage where you

purchased the DivX VOD content. (Example: www.divx.com/vod) [DivX]

≥ If a disc contains CD-DA and other formats, proper playback may not be

possible.

No subtitles.

≥ Display the subtitles. (“SUBTITLE” in Menu 1) (B 12)

≥ Subtitles may not be displayed depending on the disc. [DivX]

Point B is automatically set.

The end of an item becomes point B when it is reached.

The Setup menu cannot be accessed.

≥ Select “DVD/CD” as the source.

≥ Cancel Program and Random play. (B 11)

Power

Unit displays

General operation

Disc operation

SC-PT70EP-RQTX1024-Z_eng.book Page 20 Thursday, August 20, 2009 10:19 AM

Strona jest ładowana ...

Panasonic SCPT70 Instrukcja obsługi

Marka: Panasonic

Model: SCPT70

Kategoria: Odtwarzacze DVD

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

SC-PT70

ściągnij PDF

raport

w innych językach

slovenčina: Panasonic SCPT70 Návod na používanie
English: Panasonic SCPT70 Operating instructions

Panasonic SCPT70 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Panasonic SCPT70 Instrukcja obsługi

w innych językach

Powiązane dokumenty