KitchenAid KIF 5O41 PLETGS instrukcja

Kategoria
Zmywarki
Typ
instrukcja
Instruction for use
2
3
Installation ............................................................................................................................................ 4
Product description .............................................................................................................................. 5
First time use ......................................................................................................................................... 6
Advice and tips ..................................................................................................................................... 8
Loading the racks ................................................................................................................................ 8
Selecting a cycle and options ..............................................................................................................10
Cycle table ........................................................................................................................................... 11
Options and settings .......................................................................................................................... 12
Settings menu .................................................................................................................................... 13
Care and maintenance ....................................................................................................................... 14
Troubleshooting .................................................................................................................................. 15
After-sales service ............................................................................................................................. 17
4
INSTALLATION
CONNECTING THE WATER SUPPLY
Adaptation of the water supply for installation should only be perfor-
med by a qualied technician.
The water inlet and outlet hoses may be positioned towards the right
or the left in order to achieve the best possible installation.
Make sure the dishwasher does not bend or squash the hoses.
CONNECTING THE WATER INLET HOSE
Run the water until it is perfectly clear.
Screw the inlet hose tightly into position and turn on the tap.
If the inlet hose is not long enough, contact a specialist store or an
authorised technician.
The water pressure must be within the values indicated in the Techni-
cal Data table - otherwise the dishwasher may be function properly.
Make sure the hose is not bent or compressed.
SPECIFICATIONS FOR THE CONNECTION OF THE WATER SUPPLY HOSE:
CONNECTING THE WATER OUTLET HOSE
Connect the outlet hose to a drain duct with a minimum diameter of
2 cm A.
The outlet hose connection must be at a height ranging from 40 to
80 cm from the oor or surface where the dishwasher rests.
Before connecting the water outlet hose to the sink drain, remove the
plastic plug B.
ANTI-FLOODING PROTECTION
Anti-ooding protection. To ensure oods do not occur, the dishwasher:
- is provided with a special system which blocks the water supply in
the event of anomalies or leaks from inside the appliance.
Some models are also equipped with the supplementary safety device
New Aqua Stop, which guarantees anti-ooding protection even in
the event of a supply hose rupture.
Under no circumstances should the water inlet hose be cut as it conta-
ins live electrical parts.
ELECTRICAL CONNECTION
WARNING: Under no circumstances should the water inlet hose
be cut as it contains live electrical parts.
Before inserting the plug into the electrical socket, make sure that:
The socket is earth and complies with current regulations;
The socket can withstand the maximum load of the appliance as
shown on the data plate located on the inside of the door (see
PRODUCT DESCRIPTION).
The power supply voltage falls within the values indicated on the
data plate on the inside of the door.
The socket is compatible with the plug of the appliance.
If this is not the case, ask an authorised technician to replace the plug
(see AFTER-SALES SERVICE). Do not use extension cables or multiple
sockets. Once the appliance has been installed, the power supply
cable and the electrical socket should be easily accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, have it replaced by the ma-
nufacturer or its authorised Technical Assistance Service in order to
prevent all potential hazards.
The Company shall not be held responsible for any incidents, if these
regulations are not observed.
POSITIONING AND LEVELLING
1. Position the dishwasher on a level sturdy oor. If the oor is uneven,
the front feet of the appliance may be adjusted until it reaches
a horizontal position. If the appliance is levelled correctly, it will be
more stable and much less likely to move or cause vibrations and
noise while it is operating.
2. Before recessing the dishwasher, stick the adhesive transparent strip
under the wooden shelf in order to protect it from any condensation
which may form.
3. Place the dishwasher so that its sides or back panel are in contact
with the adjacent cabinets or the wall. This appliance can also be
recessed under a single worktop.
4. To adjust the height of the rear foot, turn the red hexagonal bushing
on the lower central part at the front of the dishwasher using a
hexagonal spanner with an opening of 8 mm. Turn the spanner in
a clockwise direction to increase the height and in an anticlockwise
direction to decrease it.
DIMENSIONS AND CAPACITY:
WATER SUPPLY cold or hot (max. 60°C)
WATER INTAKE 3/4”
POWER OF WATER PRESSURE
0,05 ÷ 1 MPa (0.5 ÷ 10 bar)
7,25 – 145 psi
WIDTH 598 mm
HEIGHT 820 mm
DEPTH 555 mm
CAPACITY 14 standard place-settings
ATTENTION: If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.
Before using the appliance carefully read Safety Instructions guide.
MIN 40 cm
MAX 80 cm
5
1 2 3 4 5 6 7 8 9 10
1. Upper rack
2. Cutlery rack
3. Foldable aps
4. Upper rack height adjuster
5. Upper sprayer arm
6. Dynamic Clean support
7. Lower rack
8. Lower sprayer arm
9. Filter Assembly
10. Salt reservoir
11. Detergent and Rinse Aid dispensers
12. Rating plate
13. Control panel
1. ON-OFF button
2. CYCLES 6 buttons for direct access popular cycles
3. EXTRA CYCLES button. Access to other cycles
4. INFO button. Provide info for selected cycle
5. DISPLAY - Indicators area
6. DISPLAY - Information area
7. PREVIOUS button for options/settings
8. SET button. Select/change options and settings
9. NEXT button for options/settings
10. START button
PRODUCT DESCRIPTION
CONTROL PANEL
DISPLAY - INDICATORS
A. START DELAY
B. ECO CYCLE
C. MULTIZONE - Cutlery rack
D. CLOSED WATER TAP
E. ADD SALT
F. MULTIZONE - Upper Rack
G. MULTIZONE - Lower Rack
H. ADD RINSE AID
I. TABLET
A B C
I H G F
D
E
The control panel of this dishwasher activates pushing by ON/OFF button.
For energy saving the control panel deactivates automatically after 10 minutes if no cycle has started.
1
7
2
3
4
6
5
11
13
12
10
8
9
0000 000 00000
Service:
6
After connecting the appliance to the power supply for the rst time,
the display will guide you to set up the appliance for rst use.
1. The language selection
To select preferred language please
press button „<” or „>”.
Conrm by pressing „SET button.
After language conrmation, the appliance will go through the rst
time use conguration menu.
2. Setting the water hardness
The water hardness is by default
set to level 3. To change water
hardness level press button „<” or „>”
repeatedly.
To conrm your choice press „SET
button. The level must be set
according to the table below.
To allow the water softener to work in a perfect way, it is essential that
the water hardness setting is based on the actual water hardness in your
house. This information can be obtained from your local water supplier.
3. Filling the water softener
When water hardness is set, it is
required to ll water softener with
water and special regeneration salt.
Remove the lower rack and unscrew
the reservoir cap (anticlockwise)
As a rst step it is needed to ll
reservoir with water ( ~1.5 litres).
Once done, proceed to the next
step by pressing „SET button.
Position the funnel (see gure) and ll the salt reservoir right up to its
edge (approximately 1 kg); it is not unusual for some water will spill out.
Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get
into the container during the wash program (this could damage the
water softener beyond repair).
Once done, proceed to the next step by pressing „SET button.
Only use salt that has been specically designed for dishwashers.
4. Setting the brightness level
The brightness level is by default set
to level 5. To change brightness level
press button „<” or „>” repeatedly.
To conrm Your choice press „SET
button.
5. Detergent type operation
In this step it is very important to
choose what type of detergent will
be used (tablet/capsule or
gel/powder).
If you prefer to use All-in-one
detergent in tablet or capsule for
washing - press „SET, then go to
step 7. Open tap operation on the
next page.
The symbol on display will be lit. If you prefer to use gel or po-
wder detergent for washing, press „<” or „>”, then go to step 6. Rinse
aid operation.
6. Rinse aid operation*
*If All-in-one detergent was chosen in the previous step, this step will
be skipped by the appliance.
WATER HARDNESS = 3
<> = CHANGE OK = YES
WATER HARDNESS
1=MIN, 5=MAX
LANGUAGE: ENGLISH?
<> = CHANGE OK = YES
ENGLISH
SELECTED
POUR WATER
OPERATION
INSERT 1,5 LITER OF
OK = DONE
WATER IN THE
OK = DONE
WATER SOFTENER
OK = DONE
INSERT SALT
OPERATION
ADD 1KG OF SALT
OK = DONE
IN THE SALT DISPENSER
OK = DONE
RINSE AID
OPERATION
INSERT RINSE AID
OK = DONE
IN THE DISPENSER
OK = DONE
FIRST TIME USE
ADJUST BRIGHTNESS
1=MIN, 5=MAX
BRIGHTNESS = 5
<> = CHANGE OK = YES
DETERGENT TYPE
OPERATION
DO YOU USE
<> = NO OK = YES
DETERGENT?
<> = NO OK = YES
“ALL IN ONE”
<> = NO OK = YES
A
B
Water Hardness Table
Level
°dH
German degrees
°fH
French degrees
°Clark
English degrees
1 Soft 0 - 6 0 - 10 0 - 7
2 Medium 7 - 11 11 - 20 8 - 14
3 Average 12 - 16 21 - 29 15 - 20
4 Hard 17 - 34 30 - 60 21 - 42
5 Very hard 35 - 50 61 - 90 43 - 62
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
Residual saline solution or grains of salt can lead to corrosion,
irreparably damaging the stainless steel components.
The guarantee is not applicable if faults are caused by such
circumstances.
If the salt container is not lled, the water softener and the heating
element may be damaged as a result of limescale accumulation.
Using of Salt is recommended with any type of dishwasher detergent.
7
1. Open the dispenser B by pressing and pulling up the tab on the lid.
2. Carefully introduce the rinse aid as far as the maximum (110 ml) re-
ference notch of the lling space A - avoid spilling it. If this happens,
clean the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it.
4. Conrm operation by pressing „SET button.
NEVER pour the rinse aid directly into the tub.
Setting rinse aid level
(not necessary when using tablets/capsules)
The rinse aid dosage can be adjusted to the detergent used. The lower
the setting, the less rinse aid is dispensed. The factory setting is for (5)
level.
To change, follow instructions in section “SETTINGS / MENU”.
7. Open tap operation
Check water tap is open. If closed, open it then conrm by pressing
„SET button.
8. First cycle operation
Before normal use of appliance it is
recommended to run Intensive cyc-
le rst, to calibrate the appliance.
Insert a detergent into dispenser
chamber D (see below), then press
„SET button.
Intensive cycle will be selected
automaticly. Press „START
button and close the appliance
door within 4 seconds.
This rst cycle can be up to 20
minutes longer as a result of the
automatic calibration process.
After this process the appliance is ready for normal use.
OPEN TAP
OPERATION
OPEN THE
OK = DONE
WATER TAP
OK = DONE
FIRST CYCLE
OPERATION
REMEMBER TO RUN THE
OK = EXIT
INTENSIVE CYCLE
OK = EXIT
WITH EMPTY BASKETS
OK = EXIT
TO COMPLETE
OK = EXIT
THE FIRST SET UP
OK = EXIT
ADDING A DETERGENT
To achieve the best washing and drying results, the combined use of
detergent, rinse aid liquid and rened salt is required.
We recommend using detergents that do not contain phosphates or
chlorine, as these products are harmful to the environment.
Good washing results also depend on the correct amount of deter-
gent being used.
Exceeding the stated amount does not result in a more eective wash
and increases environmental pollution.
The amount can be adjusted to the soil level. In the case of normally
soiled items, use approximately either 35g (powder detergent) or
35ml (liquid detergent) and additional tea spoon of detergent directly
inside the tub. If tablets are used, one tablet will be enough.
If the crockery is only lightly soiled or if it has been rinsed with water
before being placed in the dishwasher, reduce the amount of deter-
gent used accordingly (minimum 25 g/ml) e.g. skip the powder/gel
putted inside the tub.
To open the detergent dispenser,
press button C. Introduce the deter-
gent into the dry dispenser D only.
Place the amount of detergent for
pre-washing directly inside the tub.
1. When measuring out the deter-
gent refer to the mentioned ear-
lier information to add the proper
quantity. Inside the dispenser D
there are indications to help the
detergent dosing.
2. Remove detergent residues from the edges of the dispenser and
close the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until the
closing device is secured in place.
The detergent dispenser automatically opens up at the right time
according to the program.
If you are using a All-in-one detergents, we recommend that you add
salt in any case, especially if the water is hard or very hard (follow the
instructions given on the packaging).
C
D
Usage of detergent not designed for dishwashers may cause
malfunction or damage to the appliance.
8
ADVICE AND TIPS
LOADING THE RACKS
CUTLERY RACK
The third rack was designed tohouse the cutlery.
Arrange the cutlery as shown in the gure.
A separate arrangement of the cutlery makes collection easier after
washing and improves washing and drying performance.
Knives and other utensils with sharp edges must be positioned
with the blades facing downwards.
The geometry of the rack makes it possible to place such small items as
coee cups in the area in the middle.
The cutlery basket is equipped with two sliding side trays to make the
most of the height of the space below and enable the loading of high
items into upper rack.
TIPS
Before loading the baskets, remove all food residues from the crockery
and empty the glasses. You do not need to rinse beforehand under
running water.
Arrange the crockery so that it is held in place rmly and does not tip
over; and arrange the containers with the openings facing downwards
and the concave/convex parts placed obliquely, thus allowing the
water to reach every surface and ow freely.
Warning: lids, handles, trays and frying pans do not prevent the spray-
er arms from rotating.
Place any small items in the cutlery basket.
Very soiled dishes and pans should be placed in the lower basket
because in this sector the water sprays are stronger and allow a higher
washing performance.
After loading the appliance, make sure that the sprayer arms can
cotate freely.
UNSUITABLE CROCKERY
Wooden crockery and cutlery.
Delicate decorated glasses, artistic handicraft and antique crockery.
Their decorations are not resistant.
Parts in synthetic material which do not withstand high temperatures.
Copper and tin crockery.
Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces can
change and fade during the washing process. Some types of glass (e.g.
crystal objects) can become opaque after a number of wash cycles too.
DAMAGE TO GLASS AND CROCKERY
Only use glasses and porcelain guaranteed by the manufacturer as
dishwasher safe.
Use a delicate detergent suitable for crockery
Collect glasses and cutlery from the dishwasher as soon as the wash
cycle is over.
TIPS ON ENERGY SAVING
When the household dishwasher is used according to the manufac-
turer’s instructions, washing tableware in a dishwasher usually
consumes less energy and water than hand dishwashing.
In order to maximize dishwasher eciency it is recommended to
initiate the wash cycle once dishwasher is fully loaded. Loading
the household dishwasher up to the capacity indicated by the man-
ufacturer will contribute to energy and water savings. Information
on correct loading of tableware can be found in Loading chapter.
In case of partial loading it is recommended to use dedicated wash
options if available (Half load/ Zone Wash, Multizone), illing up only
selected racks. Incorrect loading or overloading the dishwasher may
increase resources usage (such as water, energy and time, as well as
increase noise level), reducing cleaning and drying performance.
Manual pre-rinsing of tableware items leads to increased water and
energy consumption and is not recommended.
HYGIENE
To avoid odour and sediment which can be accumulated in the
dishwasher please run a high temperature program at least once a
month. Use a tea spoon of detergent and run it without the loading to
clean your appliance.
9
UPPER RACK
Load delicate and light
dishes:glasses, cups, saucers, low
salad bowls.
The upper rack has tip-up
supports which can be used in a
vertical position when arranging
tea/ dessert saucers or in a lower
position to load bowls and food
containers.
(loading example for the upper rack)
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable aps can be
positioned at three dierent heights to
optimize the arrangement of crockery
inside the rack.
Wine glasses can be placed safely in
the foldable aps by inserting the stem
of each glass into the corresponding
slots.
Depending on the model:
to unfold the aps there is needed
to slide it up and rotate or release it
from the snaps and pull it down.
to fold the aps there is needed to rotate it and slide aps down or
pull it up and attach aps to the snaps.
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted:
high position to place bulky crockery in the
lower basket and low position to make the
most of the tip-up supports by creating more
space upwards and avoid collision with the
items loaded into lower rack.
The upper rack is equipped with a Upper
Rack height adjuster (see gure), without
pressing the levers, lift it up by simply holding
the rack sides, as soon as the rack is stable in
its upper position.
To restore to the lower position, press the levers A at the sides of the
rack and move the basket downwards.
We strongly recommend that you do not adjust the height of the
rack when it is loaded.
NEVER raise or lower the basket on one side only.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids
should ideally be placed at the sides to avoid interferences with the
spray arm.
The lower rack has tip-up supports which can be used in a vertical
position when arranging plates or in a horizontal position (lower) to
load pans and salad bowls easily.
(loading example for the lower rack)
GLASS CARE
Dedicated accessory that
allows you to safely store
dierent types of stem
glasses in the lower rack.
It enables cleaning &
drying results by allowing
an optimised and stable
positioning of the glasses.
DYNAMIC CLEAN IN LOWER RACK
Dynamic Clean uses the special water
jets in the rear of cavity to wash more
intensively the high dirty items.
Placing the pots/casseroles faced to
the Dynamic Clean® component please
activate the DYNAMIC CLEAN on the
panel.
The lower rack has a Dynamic Clean, a special pull-out support in the
rear of the rack that can be used to support frying pans or baking pans
in upright position, thus taking up less space.
How to use Dynamic Clean:
1. Adjust the Dynamic Clean area
(G) folding down the rear plate
holders to load pots.
2. Load pots and casseroles inclined
vertically in Dynamic Clean area.
Pots have to be inclined towards
the power water jets.
2
3
1
1
3
2
A
B
10
SELECTING A CYCLE AND OPTIONS
POWER
CLEAN
50° 3:10h
DYNAMIC
CLEAN
50° 3:10h
MODIFYING A RUNNING PROGRAM
If a wrong program was selected, it is possible to change it, provided
that it has only just begun: open the door, press and hold the „ON/OFF”
button, the machine will switch o.
Switch the machine back on using the „ON/OFF” button and
select the new wash cycle and any desired options; start the cycle
by pressing the „START button and closing the door within 4
sec.
TO PAUSE THE CYCLE (ADDING EXTRA ITEMS)
Open the door and place the crockery inside the dishwasher,
(beware of HOT steam!). Press „START button and close the
door within 4 sec. to resume the cycle from the point at which it was
interrupted.
ACCIDENTAL INTERRUPTIONS
If the door is opened during the wash cycle, or if there is a power
cut, the cycle stops. To resume the cycle from where it was interrup-
ted, press the „START button and close the door within 4 sec.
Open appliance door (beware of hot steam!) and unload the racks,
starting from the lower rack rst.
If it is needed to rell salt reservoir or rinse aid dispenser, it is
recommended to do this operations right before start of the next
cycle.
ECO CYCLE
1 2 3
45
NORMALLY SOILED CROCKERY.
STANDARD PROGRAM,
WATER ENERGY
The list of available cycles and options can be found in Cycle Table
on next page. Eco cycle is selected by default. If you want to have Last
Used cycle selected by default, you can change it in „Settings Menu”.
It is possible to select a cycle by pressing 1 of 6 cycles direct access
buttons or by pressing „Extra Cycles button repeatedly. When the
last one is reached a further press goes back to the rst.
Press cycle button to choose cycle in accordance with the level
of soiling of the dishes and with Cycle Table. Information will be
shown on the display:
1. Indicators
2. Name of the selected cycle
3. Vertical bar showing the position of the extra cycle list only
4. Energy consumption of the selected cycle
5. Water consumption of the selected cycle
Three seconds after selecting a cycle, its
time and temperature will be displayed
(if available).
Press „INFO” button to display a brief description of the cycle and
its water / energy consumption.
During the selection phase the „START LED blinks.
Additional options are available for most cycles (see „Options and
Settings” section). When any option is selected, its name is shown on
the display on the right.
If more than one option is selected one
bullet point for each option is displayed.
Each option name is displayed for 3 sec.
with its bullet point fulled.
When the cycle and option selection is complete, press „START
button and close the door within 4 seconds to start chosen cycle.
After the cycle nishes, there is an acustic signal and the dispaly shows:
On the display additional information can be shown:
ADD SALT - rell salt reservoir.
ADD RINSE AID - rell rinse aid.
DEGREASE AND CLEAN MACHINE WE RECOMMEND WPRO - every 50 cycle, will be
recommended to use the WPRO cleaner (according to instruction
on the consumable).
After 10 minutes the appliance switches o.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently
preventing scale buildup on heater, contributing also to better cleaning
eciency.
This system regenerates itself with salt, therefore it is required to
rell salt container when empty.
Frequency of regeneration depends on water hardness level setting -
regeneration takes place once per 6 Eco cycles with water hardness
level set to 3.
Regeneration process starts in nal rinse and nishes in drying phase,
before cycle ends.
Single regeneration consumes: ~3.5L of water;
Takes up to 5 additional minutes for the cycle;
Consumes below 0.005kWh of energy.
CYCLE FINISHED
11
CYCLES TABLE
CYCLE Available options *
Drying
phase
Auto Door
Opening /
NaturalDry
Duration of
wash cycle
(h:min)
**
Water
consumption
(l/cycle)
Energy
cosumption
(kWh/cycle)
ECO
50°
TABLET, START DELAY,
DYNAMIC CLEAN, BOOST
3:10 9.5 0.75
DYNAMIC SENSOR
50-60°
TABLET, START DELAY, MULTIZONE,
DYNAMIC CLEAN, BOOST
1:25 - 3:00 7.0 - 14.0 0.90 - 1.40
PROFESSIONAL
65°
TABLET, START DELAY, MULTIZONE,
DYNAMIC CLEAN
- 2:27 16.5 1.70
MIXED
60°
TABLET, START DELAY, MULTIZONE
2:30 16.0 1.30
FAST WASH&DRY
50°
TABLET, START DELAY, MULTIZONE
1:25 11.5 1.10
GLASS
45°
TABLET, START DELAY, MULTIZONE,
BOOST
2:05 11.5 1.20
EXTRA CYCLES - available by pressing button
FAST 30’ 50°
TABLET, START DELAY, MULTIZONE
- - 0:30 9.0 0.50
SILENT 50°
TABLET, START DELAY
3:30 15.0 1.15
DYNAMIC HYGIENE 65°
START DELAY
- 1:40 10.0 1.30
PRE-WASH cold
START DELAY, MULTIZONE
- - 0:12 4.5 0.01
SELF CLEAN 65°
START DELAY
- - 0:50 8.0 0.85
1. ECO - Eco programme is suitable to clean normally soiled tableware, that for this use, it is the most ecient programme in terms of its
combined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
2. DYNAMIC SENSOR - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program
accordingly.
3. PROFESSIONAL - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
4. MIXEDMixed soil. For normally soiled dishes with dried food residues.
5. FAST WASH&DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning performance in shorter time.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
EXTRA CYCLES
7. FAST 30’ - Program to be used for half load of lightly-soiled dishes with no dried food residues. Does not include drying phase.
8. SILENT -
Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
9. DYNAMIC HYGIENE -
Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
dishwasher.
10. PRE-WASH - Crockery to be washed later. No detergent to be used with this program.
11. SELF CLEAN - Program to be used to perform maintenance of the dishwasher, to be carried out only when the dishwasher is EMPTY using
specic detergents designed for dishwasher maintenance.
Notes:
Please note that cycle Fast 30’ is dedicated for lightly soiled dishes.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Pre-treatment of the dishes is not needed before any of the programs.
* Not all options can be used simultaneously.
** Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options
and sensor calibration. The sensor calibration can increase program duration up to 20 min.
12
OPTIONS AND SETTINGS
TABLET (All-in-one)
This setting allows you to optimise the performance of the cycle
according to the type of detergent used. Enable it if you use combined
detergents in tablet form (rinse aid, salt and detergent in 1 dose).
To set the Tablet, enter in the setting
menu by pressing „SET button and
navigate with „< , >” until TABLET
is shown, then press „SET button.
START DELAY
The start of the cycle may be delayed for a selected period of time.
To set a delay, enter in the setting menu by pressing „SET button and
navigate with „< , >” until „START DELAY is shown, then press „SET button.
With each press of the button “>” or “<“, the delay start increases by:
every 0:30 if selection below 4 hours,
every 1:00 if selection is below 12 hours,
every 2 hours if selection is above 12 hours.
Default value is OFF.
If delay is selected, the is lit.
Once „SET button is pressed the
delay is conrmed and the machine
comes back to the cycle selection
screen with delay value visible.
Press „START and close the door within 4 sec. to start the delay.
To remove the delay, press „<” or „>” button until „OFF” is displayed.
MULTIZONE
If there are not many dishes to be washed it can be loaded in one rack
only. Using this option you can select which rack you want to wash.
To set the Multizone, enter in the setting menu by pressing „SET
button and navigate with „< , >” until „MULTIZONE” is shown, then
press „SET button.
By default the MULTIZONE is not
active and all racks icons are lit.
The multizone icon becomes lit.
The multizone icon becomes lit.
The multizone icon becomes lit.
Remember to load the upper or lower rack only, and to reduce the
amount of detergent accordingly.
If upper rack is removed, please apply detergent directly to tub
instead of detergent dispenser.
DYNAMIC CLEAN
Thanks to additional water jets this option provides a more intensive
and powerful wash in the specic area of lower rack.
Default value is OFF.
To set the Dynamic Clean, enter in
the setting menu by pressing „SET
button and navigate with „< , >”
until „DYNAMIC CLEAN” is shown,
then press „SET button.
BOOST
The boost option delivers a cut 25%-67% of the duration for main
cycles, while ensuring an optimal level of washing and drying.
In order to do that it will require more water and energy consumption
compared to the regular full-lenght cycle. The option can be selected
on programs: Eco 50°, Dynamic Sensor 50-60°, Glass 45°.
To set the Boost, enter in the setting
menu by pressing „SET button and
navigate with „< , >” until „BOOST
is shown, then press „SET button.
With each press of the button „>” or
„<“ option will be ON or OFF.
Conrm by pressing „SET” button.
FLOOR LIGHT
A LED light projected on the oor indicates that the dishwasher is
working. The light stays on during the cycle and switches o at the
end of the cycle.
This feature is active by default, but it is possible to deactivate it in the
“SETTINGS MENU”.
TUB LIGHT
When the feature is active the LEDs in the tub are automatically
switched on/o as soon as the user open/close the door respectively.
If the door remains opened for more than 10 min, the LEDs in the
tub switch o (to turn them on again, the door has to be closed and
opened again).
This feature is active by default, but it is possible to deactivate it in the
“SETTINGS MENU”.
TABLET OFF
TABLET ON
TABLET ON
MULTIZONE OK
<CUTLERY ONLY>
<ALL RACKS> < >
<LOW ONLY> < >
<CUTLERY ONLY> < >
<HIGH ONLY> < >
With each cycle additional options can be used. A full list of available options working with specic cycles can be found in the Cycle Table on
the previous page. All active options are shown on the display.
To set an option press „SET button. SET OPTIONS message is shown for a few seconds. Then use „<” or „>” button to navigate through the option
list. Press „SET to select the option, in the setting menu the LED above „SET button is lit.
If the option is not available, it will be still visible in its position but with „ ”
START DELAY OFF
<STARTS IN h> OFF
<STARTS IN h> 4:00
<STARTS IN h> 4:00
BOOST OFF
BOOST ON
BOOST ON
DYNAMIC CLEAN OFF
DYNAMIC CLEAN ON
DYNAMIC CLEAN ON
13
SETTINGS MENU
Language
To change language, enter in the
setting menu by pressing „SET
button and navigate with „< , >”
until „LANGUAGE” is shown, then
press „SET button.
First cycle
You can choose which cycle is
selected by default when switching
on the appliance: ECO or the LAST
USED one.
To change rst cycle, enter in the
setting menu by pressing „SET but-
ton and navigate with „< , >” until
„FIRST CYCLE” is shown, then press
„SET button.
Sounds
To change sounds, enter in the
setting menu by pressing „SET
button and navigate with „< , >”
until „SOUNDS” is shown, then press
„SET button.
Choose between 2 levels: HIGH;
LOW. Can be also OFF.
Water Hardness
To change water hardness level,
enter in the setting menu by
pressing „SET button and navigate
with „< , >” until WATER HARDNESS”
is shown, then press „SET button.
To setup correct level according to water hardness, see table on page 6.
Screen Brightness
To change screen brightness
level, enter in the setting menu by
pressing „SET button and navigate
with „< , >” until „SCREEN BRIGHT. is
shown, then press „SET button.
Choose between ve levels: 1, 2, 3, 4 and 5.
Floor Light
To change oor light, enter in the
setting menu by pressing „SET
button and navigate with „< , >”
until „FLOOR LIGHT is shown, then
press „SET button.
Tub Light
To change tub light, enter in the
setting menu by pressing „SET
button and navigate with „< , >”
until TUB LIGHT is shown, then
press „SET button.
Auto Door Opening / NaturalDry
To set Auto Door Opening / NaturalDry
on or o, enter in the setting menu by
pressing „SET button and navigate with
„< , >” until NATURALDRY is shown,
then press „SET button.
Auto Door Opening / NaturalDry is a convection drying system which
automatically opens the door during/after drying phase to ensure ex-
ceptional drying performance every day. Door opens at the tempera-
ture that is safe to your kitchen furniture, thus door will not be opened
when the option of BOOST is on.
As additional steam protection, special designed protection foil is added
together with the dishwasher. To see how to mount protection foil
please refer to (INSTALLATION GUIDE).
Rinse Aid level
To change rinse aid level, enter in
the setting menu by pressing „SET
button and navigate with „< , >”
until „RINSE AID LEV. is shown, then
press „SET button.
Choose between ve levels: 1, 2, 3, 4 and 5.
If the rinse aid level is set to 1, no rinse aid will be supplied. The LOW
RINSE AID indicator light will not be lit if you run out of rinse aid.
The factory setting is for (5) level .
If you see bluish streaks on the dishes, set a low number (2-3).
If there are drops of water or limescale marks on the dishes, set
a high number (4-5).
Demo mode
To see to demo mode, enter in the
setting menu by pressing „SET
button and navigate with „< , >”
until „DEMO MODE” is shown, then
press „SET button.
Reset to factory default
To reset to factory default, enter in
the setting menu by pressing „SET
button and navigate with „< , >”
until „RESET TO DEF. is shown, then
press „SET button.
Exit
To exit the setting menu, press any
cycle button or press „< , >” button
untill EXIT is shown, then press
„SET button.
8.NATURALDRY ON
8.NATURALDRY OFF
9.RINSE AID LEV. 4
9.RINSE AID LEV. 5
11.RESET TO DEF. OK
11.OFF
11.ON < >
12.EXIT < >
4.WATER HARDNESS 3
5.SCREEN BRIGHT. 5
6.FLOOR LIGHT ON
7.TUB LIGHT ON
To change machne settings you need to enter into the Settins Menu.
Press „SET” button and navigate with „< , >” until SETTINGS is shown, then press „SET” button.
To exit the setting menu, press any cycle button or press „< , >” button untill EXIT is shown, then press „SET” button.
4.WATER HARDNESS 4
5.SCREEN BRIGHT. 3
6.FLOOR LIGHT OFF
7.TUB LIGHT OFF
1.LANGUAGE OK
1.ENGLISH
1.ITALIAN < >
2.FIRST CYCLE OK
2.<LAST USED>
2.<ECO> < >
3.SOUNDS OK
3.<OFF>
3.<HIGHT> < >
10.DEMO MODE ON
10.DEMO MODE OFF
14
CARE AND MAINTENANCE
CLEANING THE DISHWASHER
Any marks on the inside of the appliance may be
removed using a cloth dampened with water and a
little vinegar.
The external surfaces of the machine and the control
panel can be cleaned using a non-abrasive cloth
which has been dampened with water. Do not use
solvents or abrasive products.
PREVENTING UNPLEASANT ODOURS
Always keep the door of the appliance ajar in order to avoid moisture
from forming and being trapped inside the machine.
Clean the seals around the door and detergent dispensers regularly
using a damp sponge. This will avoid food becoming trapped in the se-
als, which is the main cause behind the formation of unpleasant odours.
CHEKING THE WATER SUPPLY HOSE
Check the inlet hose regularly for brittleness and cracks. If damaged,
replace it by a new hose available through our After-Sales Service or
your specialist dealer. Depending on the hose type:
If the inlet hose has a transparent coating, periodically check if the
colour intensies locally. If yes, the hose may have a leak and should
be replaced.
For water stop hoses: check the small safety valve inspection window
(see arrow). If it is red, the water stop function was triggered, and the
hose must be replaced by a new one.
For unscrewing this hose, press the release button while unscrewing
the hose.
CLEANING THE WATER INLET HOSE
If the water hoses are new or have not been used for an extended
period of time, let the water run to make sure it is clear and free of im-
purities before performing the necessary connections. If this precau-
tion is not taken, the water inlet could become blocked and damage
the dishwasher.
CLEANING THE FILTER ASSEMBLY
Regularly clean the lter assembly so that the lters do not clog and
that the waste water ows away correctly.
Using dishwasher with clogged lters or foreign objects inside ltra-
tion system or sprayarms may cause unit malfunction resulting in lose
of performance, noisy work or higher resources usage.
The lter assembly consists of three lters which remove food residues
from the washing water and then recirculate the water.
The dishwasher must not be used without lters or if the lter is
loose.
At least once per month or after each 30 cycles, check the lter assembly
and if necessary clean it thoroughly under running water, using a non-
-metallic brush and following the instructions below:
1. Turn the cylindrical lter A in an anti-clockwise direction and pull it
out (Fig 1).
2. Remove the cup lter B by exerting a slight pressure on the side
aps (Fig 2).
3. Slide out the stainless-steel plate lter C (Fig 3).
4. In case you nd foreign objects (such as broken glass, porcelain,
bones, fruit seeds etc.) please remove them carefully.
5. Inspect the trap and remove any food residues. NEVER REMOVE
the wash-cycle pump protection (black detail) (Fig 4).
After cleaning the lters, re-place the lter assembly and x it in po-
sition correctly; this is essential for maintaining the ecient operation
of the dishwasher.
CLEANING THE SPRAY ARMS
On occasions, food residue may
become encrusted onto the spray
arms and block the holes used
to spray the water. It is therefore
recommended that you check the
arms from time to time and clean
them with a small non-metallic
brush.
To remove the upper spray arm,
turn the plastic locking ring in an
anti-clockwise direction. The upper spray arm should be replaced so
that the side with the greater number of holes is facing upwards.
The lower spray arm may be removed
by pulling it upwards.
21
43
A
C
A
B
ATTENTION: Always unplug the appliance when cleaning it and when performing maintenance work.Do not use ammable liquids to clean
the machine.
15
TROUBLESHOOTING
PROBLEMS POSSIBLE CAUSES SOLUTIONS
Display shows:
CHECK SALT! or
ADD SALT
Salt reservoir is empty.
Rell reservoir with salt (see page 6).
Adjust water hardness (see page 6).
Display shows:
CHECK RINSE AID! or ADD RINSE
AID
Rinse aid dispenser is empty. Rell dispenser with rinse aid (see page 6).
... is not working / will not
start.
The appliance must be switched on. Check the household circuit fuse if there is no power supply.
The appliance door doesn’t close. Check if the appliance door is closed.
“Start Delay option is ON.
Check whether the „Start Delay option has been selected. If it has, the
appliance will start once the set time has elapsed. If necessary, Reset the
current cycle by switching OFF the dishwasher , then switch it on again,
select a new cycle, press START and close the door within 4 seconds.
Display shows: F6
symbol on the display
indicators
Water pressure is too low.
The water tap must be fully open during water inlet (minimum capaci-
ty: 0.5 litres per minute).
Kinked water inlet hose or cloged
inlet lters.
The water inlet hose must not be kinked and the inlet lter in the water
tap connector must not be dirty or clogged.
Display shows: F3
Dirty lters. Clean the lters.
Kinked drain hose. The drain hose must not be kinked.
Syphon hose connection closed.
The closure disk of the syphon hose connection
must be removed.
Display shows: F2
Dirty lters or spray arms. Clean lters and spray arms.
Too little water in the appliance
system.
Concave items (e.g. bowls, cups) must be arranged
facing downwards in the rack.
Drain hose incorrectly tted.
The drain hose must be tted correctly (for high mounted appliances,
leave min. 200 - 400mm from the lower edge of the appliance) - see
Installation.
High level of foam inside.
Repeat without detergent or wait until foam
disappears..
Water pressure is too low.
The water tap must be fully open during water inlet (minimum capaci-
ty: 0.5 litres per minute).
Kinked water inlet hose or cloged
inlet lters.
The water inlet hose must not be kinked and the inlet lter in the water
tap connector must not be dirty or clogged.
Display shows:
PRESS START AND
CLOSE THE DOOR
Door is not closed within
4 seconds of button press.
Press again and close the appliance door within 4 seconds.
Display shows:
OPEN AND CLOSE
THE DOOR
The door was not open between
cycles.
Unload appliance (if not unloaded before), open and close the door.
Display shows: Fx
Appliance has technical defect.
Call customer service (state fault displayed).
Close the water tap.
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list.
For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty booklet.
The manufacturer ensures the availability of spare parts for at least 10 years after production date of this appliance.
16
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The door doesn’t
lock.
Racks are not t to the end. Verify that racks are t to the end.
The door is not lock. Vigorously push the door until you hear theclack” sound.
The dishwasher
makes excessive
noise.
The dishes are rattling against each. Arrange the crockery correctly (see Loading the Racks).
An excessive amount of foam has been
produced.
The detergent has not been measured out correctly or it is not suitable for
use in dishwashers (see Filling the Detergent Dispenser). Reset the current
cycle by switching OFF the dishwasher, then switch it on again, select a
new program, press START and close the door within 4 seconds. Please do
not add any detergent.
The dishes have not
been dried.
The selected program hasn’t any drying
phase.
Verify on the programs table if the selected program has the drying phase.
The rinse aid has run out or the resolution
is not adequate.
Add the rinse aid or adjust the dosage levels higher (see Filling the Rinse
Aid Dispenser).
The dishes are made of non-stick or
plastic.
It is normal the presence of drops of water (see Tips).
The dishes are not
clean.
The crockery has not been arranged
properly.
Arrange the crockery correctly (see Loading the Racks).
The spray arms cannot rotate freely, being
hindered by the dishes.
Arrange the crockery correctly (see Loading the Racks).
The wash cycle is too gentle and/or deter-
gent eciency is low.
Select an appropriate wash cycle (see Programs Table).
An excessive amount of foam has been
produced (see AFTER-SALES SERVICE).
The detergent has not been measured out correctly or it is not suitable for
use in dishwashers (see Filling the Detergent Dispenser). Reset the current
cycle by switching OFF the dishwasher, then switch it on again, select a
new program, press START and close the door within 4 seconds. Please do
not add any detergent.
The cap on the rinse aid compartment has
not been shut correctly.
Make sure the cap of the rinse aid dispenser is closed.
The lter is soiled or clogged. Clean the lter assembly (see Care and Maintenance).
There is no salt. Fill the salt reservoir (see Filling the Salt Reservoir).
The dishes and glas-
ses show calcination
or a whitish lm.
The salt level is too low. Fill the salt reservoir (see Filling the Salt Reservoir).
The adjustment of the water hardness is
not adequate.
Increase the values (see Water Hardness Table).
The cap of the salt reservoir is not proper-
ly closed.
Check to have properly closed the salt reservoir cap.
The rinse aid is used up or the dosage is
insucient.
Add the rinse aid or adjust the dosage levels higher.
The dishes and
glasses are blue
streaked or have a
bluish tinge.
The rinse aid dosage is excessive. Adjust the dosage rates below.
17
AFTER-SALES SERVICE
Policy and standard documentation and additional product information can be found by:
Visiting our website: docs.kitchenaid.eu
Using QR Code
Alternatively, contact our After-sales Service (See phone number in the warranty booklet).
When contacting our After-sales Service, please state the codes provided on your product’s
identication plate.
The model information can be retrieved using the QR-Code reported in the energy label.
The label also includes the model identier that can be used to consult the portal of the registry at
https://eprel.ec.europa.eu (available only on certain models).
IEC 436
:
18
19
EN
Printed in Italy
11/20
400011509467B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240

KitchenAid KIF 5O41 PLETGS instrukcja

Kategoria
Zmywarki
Typ
instrukcja