CTC Union FRM220-1000S-2F Instrukcja obsługi

CTC Union
Marka
CTC Union
Model
FRM220-1000S-2F
Kategoria
Sieciowe konwertery mediów
Typ
Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

www.ctcu.comwww.ctcu.com
www.ctcu.com
Gigabit Ethernet over Fiber Media Converter
FRM220-1000E(S)-2F
User Guide
Panel
■
Figure #2 Stand-alone chassis options for FRM220-1000E(S)-2F
1000E-DC12 1000E-AC 1000E-DC48 1000E-AD
1000ES-2F 1000E-2F
■
Figure #1. Upper Panel of FRM220-1000E(S)-2F
DC Jack
AC Jack
Power
Switch
Power
Switch
Power
Switch
DC
Terminal
AC Jack
Power
Switch
DC
Terminal
[email protected][email protected]
[email protected]
CTC Union Technologies Co., Ltd.
www.ctcu.com[email protected]
Introduction
The FRM220-1000E Families are slide in ber media converters available in a number of
dierent models that also act as line cards for placement in the FRM220 platform Media
converter chassis. The FRM220-CH01 are stand-alone cases for FRM220 slide-in cards with
built-in power supply features. The FRM220-1000ES-2F is a media converter with 2-port
1000Base-X SFP. The FRM220-1000E-2F is a media converter with xed 2-port 1000Base-X.
The data transmission over optical ber media converter depends on your specic network
needs
All media converters are available with either multi-mode or single-mode optical transceivers
and with connector SC or LC. In single mode, WDM ( Wave Division Multiplexing with SC or LC )
or “Bidi” are also available in 20, 40, 60km reach, which provide the ability to transmit and
receive data using only a single optical ber. When the FRM220-1000E card is placed in the
FRM220 rack with SNMP management, the card status, type, and ber link status can all be
displayed.
The Fiber media converters give you the freedom to extend your Gigabit Ethernet network
cabling distance by allowing connectivity up to 120 kilometers. LED indicators display the
status of the converters.
Specications
Standards
IEEE802.3z 1000Base-SX/LX, Gigabit Standards
1000Base-FX Fiber Optic Connectors
1000ES-2F: Two SFP slot LC connector are provided for optic cable connection.
1000E-2F : Two SC connectors are provided for optic cable connection
Environment
Operating -- 0°C – 50°C
Storage -- 0°C – 70°C
Humidity -- 10 – 90% (non-condensing)
Power
Adapter: 12V DC 1A, Built-in AC Power 100~240 V, Built-in DC Power 18~72VDC
Dimensions: (W x D x H) mm
1000E-DC12 : 88 × 160 × 24 1000E-AC : 135 × 201 × 35
1000E-DC48 : 135 × 201 × 35 1000E-AD : 135 × 201 × 35
Application
Ethernet Ethernet
FRM220-1000ES-1+CH01 FRM220-1000E-2F+CH01
CPE ( Stand-alone ) to CPE ( Stand-alone )
FRM220-1000ES-1+CH01
www.ctcu.com[email protected]www.ctcu.com[email protected]
www.ctcu.com[email protected]www.ctcu.com[email protected]
LED Indicators
LED Function State Status
Power indicator
Fiber link 1
Fiber link 2
LFP mode
On
O
On
O
Blinking
On
O
Blinking
On
O
Converter has power
Converter has no power
Link on
No link or the link is faulty
Receiving data on the ber
Link on
No link or the link is faulty
Receiving data on the ber
Link Fault Pass Through enabled
Link Fault Pass Through disabled
PWR
Link1
Link2
LFP
Link-Fault-Pass through (LFP) Application Note
This media converter incorporates a Fiber Pass Through feature which allows indirect
sensing of a Fiber Link Loss via the 10/100/1000 Base-TX UTP connection. Whenever the
media converter detects a Link Loss condition on the Receive ber (Fiber LNK OFF), it disables
its UTP transmitter so that a Link Loss condition will be sensed on the receive UTP port. (See
the following gure) The link loss can then be sensed and reported by a Network
Management agent at the remote UTP port's host equipment.
This feature has no eect on the media converter's UTP LNK LED, which continues to
function normally, independent of the state of the Fiber LNK LED and the UTP transmitter.
This feature is enabled by default on all the FIB1-1000 family media converters.
1000ES-2F DIP Switch :
PWR
1
DIP SW
SFP 1
SFP 2
LED
On : LFP ~ enable
Off : LFP ~ disable
DIP SW Pin 1 -- Link Fault Pass Through (LFP):
DIP SW Pin 2 ~4 (Reserved)
On : LFP ~ enable
Off : LFP ~ disable
DIP SW Pin 1 -- Link Fault Pass Through (LFP):
DIP SW Pin 2 ~4 (Reserved)
1000E-2F DIP Switch :
PWR
1
DIP SW
Fiber 1
Fiber 2
LED
■
The default setting of Dip switch is all set to “OFF”
■
When FRM220-1000E(S)-2F is installed in FRM220 chassis, the SNMP
command will takeover the Dip switch setting.
Note :
Link 1 Link 2 LFPPWR
1000E(S)-2F
Fiber
Switch
or PC
Switch
or PC
TX (OFF)
RX (OFF)
RX
TX
TX
RX
RX
TX
UTP UTP
Link
Fail
Remote Fault
Link
Fail
Figure: Fiber Break Responses
www.ctcu.comwww.ctcu.com
www.ctcu.com
Gigabit Ethernet over Fiber Media Converter
FRM220-1000EDS, FRM220-1000E(S)-1
User Guide
Panel
■
Figure #2 Stand-alone rear panel of FRM220-1000E
1000E-DC12 1000E-AC 1000E-DC48 1000E-AD
1000EDS 1000ES-1 1000E-1
■
Figure #1. Upper Panel of FRM220-1000E
DC Jack
AC Jack
Power
Switch
Power
Switch
Power
Switch
DC
Terminal
AC Jack
Power
Switch
DC
Terminal
[email protected][email protected]
[email protected]
CTC Union Technologies Co., Ltd.
www.ctcu.com[email protected]
Introduction
The FRM220-1000E Families are slide in ber media converters available in a number of
dierent models that also act as line cards for placement in the FRM220 platform Media
converter chassis. The FRM220-CH01 are stand-alone cases for FRM220 slide-in cards with
built-in power supply features. The FRM220-1000EDS is a media converter with 2-port
10/100/1000Base-T to 2-port 1000Base-X SFP. The FRM220-1000ES-1 is a media converter
with 1-port 10/100/1000Base-T to 1-port 1000Base-X SFP. The FRM220-1000E-1 is a media
converter with 1-port 10/100/1000Base-T to 1-port 1000Base-X. The data transmission over
optical ber media converter depends on your specic network needs
All media converters are available with either multi-mode or single-mode optical transceivers
and with connector SC or LC. In single mode, WDM (Wave Division Multiplexing with SC or LC )
or “Bidi” are also available in 20, 40, 60km reach, which provide the ability to transmit and
receive data using only a single optical ber. When the FRM220-1000E card is placed in the
FRM220 rack with SNMP management, the card status, type, ber link status and UTP link
status can all be displayed. For the UTP side, auto-negotiation is default. There units will
automatically tailor themselves to convert both half-duplex or full-duplex signals.
The Fiber media converters give you the freedom to extend your Ethernet network cabling
distance by allowing connectivity up to 120 kilometers. LED indicators display the status of
the converters.
Specications
Standards
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T,
IEEE802.3z 1000Base-SX/LX, Gigabit Standards
10/100/1000Base-T RJ-45 Connectors
1000EDS : Two RJ45 connectors are provided for UTP cable connection.
1000ES-1 : One RJ45 connector is provided for UTP cable connection
1000E-1 : One RJ45 connector is provided for UTP cable connection
All RJ45 ports utilizing auto MDI/MDIX, which allow all UTP connections for both
straight and crossover UTP cable.
Environment
Operating -- 0°C – 50°C, Storage -- 0°C – 70°C, Humidity -- 10 – 90% (non-condensing)
1000Base-X Fiber Optic Connectors
1000EDS : Two SFP slot LC connectors are provided for optic cable connection.
1000ES-1 : One SFP slot LC connector is provided for optic cable connection
1000E-1 : One SC connector is provided for optic cable connection
Power
Adapter: 12V DC 1A, Built-in AC Power 100~240 V, Built-in DC Power 18~72VDC
Dimensions: (W x D x H) mm
1000E-DC12 : 88 × 160 × 24 1000E-AC : 135 × 201 × 35
1000E-DC48 : 135 × 201 × 35 1000E-AD : 135 × 201 × 35
568-A type 568-B typeRJ-45 Pin
5
4
3
6
1
2
7
8
Pair1-Tip
Pari1-Ring
Pair2-Tip
Pair2-Ring
Pair3-Tip
Pair3-Ring
Pair4-Tip
Pair4-Ring
Pair1-Tip
Pair1-Ring
Pair3-Tip
Pair3-Ring
Pair2-Tip
Pair2-Ring
Pair4-Tip
Pair4-Ring
www.ctcu.com[email protected]www.ctcu.com[email protected]
www.ctcu.com[email protected]www.ctcu.com[email protected]
LED Indicators
UTP Port LED Indicators
LED Function State Status
Power indicator
Fiber link 1
Fiber link 2
Operation mode
LFP mode
On
O
On
O
Blinking
On
O
On
O
Converter has power
Converter has no power
Link on
No link or the link is faulty
Receiving data on the ber
2-channel converter mode
4-port switch mode
Link Fault Pass Through enable
Link Fault Pass Through disable
PWR
Link1
Link2
2CH
LFP
LED Function State Status
mode display
Ethernet link
Yellow
Green
O
On
O
Blink
1000Base-TX
100Base-TX
10Base-T
The UTP link is ok
No link or the link is faulty
Receiving data on Ethernet
Speed
Link
Link-Fault-Pass Through (LFP) Application Note
This media converter incorporates a Fiber Pass Through feature which allows indirect
sensing of a Fiber Link Loss via the 10/100/1000 Base-TX UTP connection. Whenever the
media converter detects a Link Loss condition on the Receive ber (Fiber LNK OFF), it disables
its UTP transmitter so that a Link Loss condition will be sensed on the receive UTP port. (See
the following gure) The link loss can then be sensed and reported by a Network
Management agent at the remote UTP port's host equipment.
This feature has no eect on the media converter's UTP LNK LED, which continues to
function normally, independent of the state of the Fiber LNK LED and the UTP transmitter.
This feature is enabled by default on all the FIB1-1000 family media converters.
1000EDS DIP Switch :
PWR
DIP SW1
SFP 1
SFP 2
LED
LAN 1
LAN 2
DIP SW2
Dip SW1 Pin 5 off: 4-port switch mode (default)
Dip SW1 Pin 5 on: 2-channel converter mode
Channel one converter: SFP1 to LAN1
Channel two converter: SFP2 to LAN2
DIP SW1 Pin 5 Operation mode:
DIP SW2 Pin 5 (Reserved)
1000E(S)-1 DIP Switch :
PWR
DIP SW
SFP 1
LAN 1
LED
■
If all types of slide-in card were installed in FRM220 chassis,
The SNMP command will takeover the Dip switch setting.
Note :
Link 1 Link 2 2CHPWR
1000EDS
DIP SW1 for LAN1 and DIP SW2 for LAN2 Setting DIP SW1 for LAN1 Setting
Link 1 LFPPWR
1000E(S)-1
Fiber
Switch
or PC
Switch
or PC
TX (OFF)
RX (OFF)
RX
TX
TX
RX
RX
TX
UTP UTP
Link
Fail
Remote Fault
Link
Fail
Figure: Fiber Break Responses
Speed
UTP Link
UTP 100Mbps / Full
-
OffOnOff
UTP 1000Mbps / Full
-
OffOffOn
UTP 100Mbps / Half
-
On OnOff
UTP 10Mbps / Full
-
OffOnOn
UTP 10Mpbs / Half
-
OnOn On
LFP Off (used in converter mode)Off
---
LFP On (used in converter mode)On
---
UTP / N - Way
-
OffOffOff
FunctionPin 4Pin 3Pin 2Pin 1
UTP 100Mbps / Full
-
OffOnOff
UTP 1000Mbps / Full
-
OffOffOn
UTP 100Mbps / Half
-
On OnOff
UTP 10Mbps / Full
-
OffOnOn
UTP 10Mpbs / Half
-
OnOn On
LFP OffOff
---
LFP OnOn
---
UTP / N - Way
-
OffOffOff
FunctionPin 4Pin 3Pin 2Pin 1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

CTC Union FRM220-1000S-2F Instrukcja obsługi

CTC Union
Marka
CTC Union
Model
FRM220-1000S-2F
Kategoria
Sieciowe konwertery mediów
Typ
Instrukcja obsługi
Niniejsza instrukcja jest również odpowiednia dla
Pobierz PDF
raport

w innych językach

Powiązane artykuły

Inne dokumenty