TELE-TOWER 1101 Specyfikacja

Typ
Specyfikacja
a
Form 43-29-01-01 ©Telpro Inc. 2013 All Rights Reserved
A d j u s t a b l e Wor k P l a t for m
®
The cost effective alternative to expensive motorized units and inefficient scaffolding.
Shown here with extension
Shown here with extension
Manufactured by:
7251 So. 42nd St.
Grand Forks, ND 58201
(701) 775-0551
(800) 448-0822
www.telproinc.com
Meets Applicable U.S. ANSI and OSHA Standards*
For Rolling Work Platforms
Models
1101 / 1101-96
1101-22 /1101-2296
• Safe
• Portable
All Steel Construction
• Integrated Safety Components
• Five Minute Assembly - No Tools Needed
*Multiple Models geared for OSHA 1926.450 Construction & OSHA 1910.29 General Industry
Made in the U.S.A.
InnovationInnovation
a
www.telproinc.com
*Working height is approximated by adding
platform height to a worker’s reach.
Uniquely Adjustable Platform
Unique telescoping frame combines with a proprietary
brake winch and cable system to rapidly adjust the plat-
form height from 2’ to 11’ at six inch intervals (*up to 18’
working height).
For higher elevations, an optional extension is available
With the extension installed, the unit will reach platform
heights from 12.5’- 17.5’ (*up to 24’ working height).
Base unit assembles in just 5-10 minutes by one worker
with no tools. (Same holds true for the extension.)
a
The Tele-Tower
®
prevents
wasted time setting up, adjusting, and
tearing down other scaffolding. No more worries
about losing parts, Tele-Tower
®
components are integral
to the unit. One person can assemble the unit safely from the
ground - no tools needed. Transport in a van or pickup truck.
Assembly
Assembly
Assembly
Assembly
Versatility
wasted time setting up, adjusting, and
wasted time setting up, adjusting, and
tearing down other scaffolding. No more worries
tearing down other scaffolding. No more worries
tearing down other scaffolding. No more worries
about losing parts, Tele-Tower
about losing parts, Tele-Tower
about losing parts, Tele-Tower
to the unit. One person can assemble the unit safely from the
to the unit. One person can assemble the unit safely from the
to the unit. One person can assemble the unit safely from the
to the unit. One person can assemble the unit safely from the
The spacious deck allows two workers to work
side by side or allows one person a generous
work space. Safe and affordable, two reasons
to replace your motorized units to this cost
effective solution.
Steel Deck: 19” or 22” W x 68” or 92” L
(depending on model choice)
4” toe board integrated into the deck
Working Space
Working Space
Versatile outriggers have easy slide-out,
lock-in adjustment. The 6’ base provides
stability at higher elevations. Slide one
side in when working next to a permanent
wall - slide both sides in when passing
through standard 32” doorways.
Outriggers
72” Full Extension 50” Half Extension 31.5” Retracted
www.telproinc.com
5” Dual
locking casters
Integral
Adjustable
Outriggers
Stable 6’ Base
Spring loaded
positive lock pins
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
& Quality
Manual Winch System
Positive Platform Heights
Integral Outriggers
Safety chains
4” Toe Safety Rail
Heavy-Duty Casters
Secure Locking Pins
Integral Toe Boards; Guard
Rails w/ Safety Chains Included
www.telproinc.com
Tele-Tower
®
with
Extension
253” (6.43 m)
max total height
210”
(5.33 m)
max
platform
height
150”
(3.81 m)
max
platform
height
Extension consists of:
(2) Complete Extension Ladders
(4) Extension Coupler Pipes
(4) Braces
(1) Deck
76.5” (1.94 m) or
100.5” (2.55 m
total outside length
depending on model
Min. to Max. base width:
31.5”-72”
(80.01 cm - 1.83 m)
or
34.25” - 72”
(80.01 cm - 1.83 m)
depending on model
133”
(3.38 m)
max platform
height
176”
(4.47 m)
max total height
72.5”
(1.84 m)
walk
through
clearance
68” (1.73 m) or
92” (2.33 m)
Inside
depending on model
47” (1.19 m)
Top inside
Tele-Tower
®
Base Unit
75.25” (1.91 m)
platform height:
fully assembled
not elevated
19” (48.26 cm) or
22” (55.88 cm)
platform width
depending on model
24” (60.26 cm)
minimum
platform height
79.5” (2.02 m)
clearance height
with safety
rails removed
Tele-Tower
®
consists of:
(2) Telescoping end sections with outriggers
on 5” heavy duty dual locking scaffold casters
(1) Connecting beam with cable elevating mechanism
(6) Interchangeable sway braces
(1) Steel safety deck with 4” toe board
(1) Set of 4 safety rails with 4 safety chains
Net Weight Static Load
Rating
Steel Safety
Deck
Platform
Heights
Max. Working
Height
Safety
Lock Pins
Elevating
System
6’ Base: Height
to Base Ratio
Ship Box Qty 1
Dimensions
Install Time
100 / 140 LBS.
550 LBS.
w/ 4” Toe board 12.5’ - 17.5’ approx. 24’ in 6” increments
from 12.5’-17.5’
Manual Winch &
Cable System
Better than
3:1
84” x 34” x 17”
180-220 LBS.
Approximately
10 minutes!
Specifi cations & Features
Tele-Tower
®
Model
Optional
Extension
Ship Box Qty 1
Dimensions
6’ Base: Height
to Base Ratio
Nominal Deck
Size
Max. Working
Height
Platform
Heights
Steel Safety
Deck
Static Load
Rating
Net Weight
Elevating
System
Geared toward
OSHA:
~370 LBS. 550 LBS.
w/ 4” Toeboard 2’ - 11’ approx. 18’ 19” Wide
6’ Long
Manual Winch &
Cable System
Better than
2:1
84”x34”x24”
450 LBS.
1177: Adds 6.5’ to
deck height
1101
1926.450
Construction
~420 LBS. 550 LBS.
w/ 4” Toeboard 2’ - 11’ approx. 18’ 19” Wide
8’ Long
Manual Winch &
Cable System
Better than
2:1
106”x36”x24”
500 LBS.
1177-96: Adds 6.5’
to deck height
1101-96
1926.450
Construction
~470 LBS. 800 LBS.
w/ 4” Toeboard 2’ - 11’ approx. 18’ 22” Wide
6’ Long
Manual Winch &
Cable System
Better than
2:1
84” x 36” x 24”
550 LBS.
1177-22: Adds 6.5’
to deck height
1101-22
1910.29
General Industry
~520 LBS.
800 LBS. w/ 4” Toeboard 2’ - 11’ approx. 18’ 22” Wide
8’ Long
Manual Winch &
Cable System
Better than
2:1
106”x36”x24”
600 LBS.
1177-2296: Adds
6.5’ to deck height
1101-2296
1910.29
General Industry
Tele-Tower
®
Tele-Tower
®
Extensions 1177, 1177-96, 1177-22, 1177-2296
150 / 190 LBS.
800 LBS.
w/ 4” Toe board 12.5’ - 17.5’ approx. 24’ in 6” increments
from 12.5’-17.5’
Manual Winch &
Cable System
Better than
3:1
84” x 34” x 17”
190 -230 LBS.
Approximately
10 minutes!
Extension
Model
1177 &
1177-96
1177-22 &
1177-2296
www.telproinc.com
Extensions
Height extensions for both the
Tele-Tower® model 1101 &
1101-96. Fasten to the top of the
Tele-Tower® and add 6.5 feet to
the height. With the extension
on the Tele-Tower® is adjust-
able from 12.5 feet to 17.5 feet
in 6 inch increments.
Storage Kit
Safety Rail Storage Cradle
Holds all four safety rails securely
under your deck. Keeps the rails
close at hand when not in use.
Safety Hoist
Use the Dual Drive winch
(Manual or Drill Drive) to safely
and rapidly lift up to 75 lbs
to the deck. Features patented
safety overload protecting
auto-brake winch system. Unit
includes bucket harness. (bucket
not included)
• Stay productively
on the deck &
move the Tele-
Tower
® around the
job with this attach-
ment.
•Automatically
adjusts with the
Tele-Tower
®
for
deck heights from
6’ to 11’
•Fits Tele-Tower
®
Models:
1101
1101-96
1101-22
1101-2296
(not for use with in-
stalled extension unit)
Ground Drive
Large Tray
Use one or both of the tool
trays to keep tools at hand
and off the deck.
Small Tray
Accessorize
Your
Reduction Drive Is an
add-on to the Tele-Tower®
that makes it easier to raise and
lower the Tele-Tower®. Great
for when you have an extension
unit installed.
The Storage Kit is
excellent for keeping
your Tele-Tower®
in a nice compact
space. It keeps the
unit all together in
a smaller foot print.
It will also hold the
extension.
800-448-0822 • [email protected] • www.telproinc.com
Tele-Tower® Connector
Joins multiple Tele-Tower®s together at the base and the
deck, allowing you to create a long working platform.
Caution must be used when adjusting heights of the
multiple Tele-Tower
®s joined by the Connector. Each
Tele-Tower
® must be adjusted individually and the deck
connector will need to be repositioned after adjusting.
All Tele-Tower®s need to be adjusted to the same height
when using the Connector. End Chains must be used to
connect the two guardrails on either end.
Add the 14-07 Tele-Rail to add guard rails between two
Tele-Tower® units spanning a bus or vehicle.
Safety Pole
Use to secure the end chains when working against
a wall and not using the guardrails on the wall side.
These are sold individually and two are required on a
Tele-Tower®.
Got a custom application or need?
Give us a call or email us with all of the details and let
us see what we can do for you.
1-800-448-0822
800-448-0822 • [email protected] • www.telproinc.com
7251 S 42nd St • Grand Forks, ND 58201 • 701-775-0551 • 800-448-0822
www.telproinc.com • [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

TELE-TOWER 1101 Specyfikacja

Typ
Specyfikacja

w innych językach