FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the United States and other countries
preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make
derivative works of the copyrighted material. Accordingly, any copyrighted material of Feniex and its licensors contained herein or in the Feniex products described in this Price
List may not be copied, reproduced, distributed, merged or modied, transmitted, transcribed, stored in retrieval system or translated into any language or computer language,
in any form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S. Patent & Trademark Oce.
BN-0118
INSTRUCTION MANUAL
AM600
TM
Safety Regulations & Warranty 3
Service after Expiration 3
Copyright 3
Feniex Product Copyright 3
Specications, Tones, & Wiring 4
Box Content 4
Dimensions 4
Pipe Mount 4
Magnet Mount 4
Mount Kit Part Numbers 4
Specications, Patterns, & Wiring 5
System Specications 5
Flash Patterns 5
Wiring Diagram 5
Power 5
Synchronization 5
Pattern Selection 5
Mounting Instructions 6
Permanent Mount 6
Pipe Mount 6
Magnet Mount 6
TABLE OF CONTENTS
FENIEX // 2019 // INSTRUCTION MANUAL // v2.2
WEB // www.feniex.com
2
TM
SAFETY REGULATIONS
The following provides all the information necessary to
safely operate the previously listed products of Feniex
Industries, Inc. Please read this manual thoroughly before
installing or operating your new product in order to
prevent any damage or injury. Failure to follow the listed
instructions in this manual may result in damage to your
products or personal injury.
• Proper installation of this product requires good
knowledge of automotive systems, electronics &
procedures.
• Please guarantee all vital components of the vehicle
are not in danger of being damaged by drilling holes
necessary for installation. Check all sides of the
mounting surface before drilling any holes into the
vehicle.
• Do not install this product in any way that interferes
with the deployment of the air bag. Doing so may
damage the eectiveness of the air bag & can lead to
serious personal and vehicle injury. The installer will
assume full responsibility of proper installation of the
new unit.
• Please clean the mounting surface before installation
of the unit when using tape, brackets, magnet, Velcro or
suction cups.
• The product’s ground wire must be connected directly
to the negative (-) battery post for eective use of the
unit. Please follow all wiring guidelines provided to
guarantee long lifespan & productivity. Failing to follow
these instructions may result in damage to the product.
WARRANTY
Feniex Industries, Inc. warrants to the original purchaser
that the product shall be free from defects in material &
workmanship for 5 years from the date of purchase for
all LED products. Feniex Industries warranties speakers,
sirens, ashers, & controllers for 2 years.
If warranty service is needed, please contact customer
support:
Phone: 1.800.615.8350
Web Site: www.Feniex.com/support
Email: techsupport@feniex.com
If the product needs to be returned for repair or
replacement, contact our customer service team (using
any method listed above) to receive a Return Merchandise
Authorization (RMA) number. Operational times are from 9
a.m. to 6 p.m. central time, Monday through Friday.
CONDITIONS
Feniex Industries, Inc. will not be held responsible for any
costs associated with equipment removal and/or
re-installation resulting from a warranty claim. It is the sole
responsibility of the party initiating a warranty claim to pay
shipping charges associated with returning a product to
Feniex Industries for repair or replacement.
SERVICE AFTER EXPIRATION
Feniex Industries will still provide service for all products
after expiration of the warranty. For any issues, call the
customer support line. In some instances it may be
necessary for the product to be shipped, freight prepaid
and insured for loss or damage to Feniex headquarters.
SAFETY REGULATIONS & WARRANTY
Utilizing non-factory screws and mounting brackets may result
in the loss of warranty coverage.
COPYRIGHT
This instruction manual and the Feniex products
described in this instruction manual may include or
describe copyrighted Feniex material. Laws in the United
States and other countries preserve for Feniex Industries
and its licensors certain exclusive rights for copyrighted
material, including the exclusive right to copy, reproduce
in any form, distribute and make derivative works of
the copyrighted material. Accordingly, any copyrighted
material of Feniex and its licensors contained herein or in
the Feniex products described in this instruction manual
may not be copied, reproduced, distributed, merged
or modied in any manner without the express written
permission of Feniex Industries, Inc.
FENIEX PRODUCT COPYRIGHTS
The products described in this document are the property
of Feniex Industries, Inc. It is furnished by express license
agreement only and may be used only in accordance with the
terms of such an agreement. Products and documentation
are copyrighted materials. Making unauthorized copies is
prohibited by law. No part of the product or documentation
may be reproduced, transmitted, transcribed, stored in
retrieval system or translated into any language or computer
language, in any form or by any means, without prior
permission from Feniex Industries, Inc.
Please do not send in product without contacting support rst
for a Return Merchandise Authorization (RMA) number.
FENIEX // 2019 // INSTRUCTION MANUAL // v2.2
WEB // www.feniex.com
3
TM
BOX CONTENTS QUANTITY
1. Beacon, Permanent Mount 1
2. Screws, Self-Tapping 3
MOUNT KITS* PART NUMBER
Pipe-Mount Kit (1" NPT) BN-0118-PM*
Magnet Mount Kit BN-0118-PM*
*Sold Separately
BOX CONTENTS, DIMENSIONS, & MOUNTING OPTIONS
PIPE MOUNT (1" NPT)
MAGNET MOUNT
6.5"
4.4"
DIMENSIONS
Using the hardware provided, secure the beacon to the
pipe-mount adapter, feeding the wire down through the
center of adapter plate. After making the appropriate
wiring connections, feed the wire through the pipe and
tighten the beacon onto the pipe. Tighten the adjustment
nut to complete the installation.
Using the hardware provided, secure the beacon to the
magnet mount. Be sure to feed the wire through the
formed opening before tightening the two components
together.
Magnetic mounts are not intended for high-speed use. Limit
speed to 35MPH or less while magnet is attached to vehicle. For
vehicles traveling over 35 MPH or with non-steel bodies, utilize
the permanent mount option.
FENIEX // 2019 // INSTRUCTION MANUAL // v2.2
WEB // www.feniex.com
4
TM
Pipe Not Included
SYSTEM SPECIFICATIONS
Input Power 12 - 24 VDC
Current Draw 2.5 Amps
External Fuse (if hard wired) 125% of Circuit Load
Power Output 20 Watts
Colors Amber, Red, Blue, White, Green
SAE Certification Class 1, J845
Flash Patterns 20
Dimensions
6.5" D x 4.4" H
FLASH PATTERNS
Single Flash [Slow] Reverse Simulated Rotating [Slow]
Single Flash [Fast] Reverse Simulated Rotating [Fast]
Double Flash [Slow] 3x Double Flash [Slow] > 3x Quint Flash [Slow]
Double Flash [Fast] 5x Double Flash [Fast] > 5x Quint Flash [Fast]
Triple Flash [Slow] 6x Sim. Rotating [Slow] > 4x Quint Flash [Slow]
Triple Flash [Fast] 8x Sim. Rotating [Fast] > 6x Quint Flash [Fast]
Quit Flash [Slow] 3x Triple Flash [Slow] > 3x Single Flash [Slow]
Quint Flash [Fast] 5x Triple Flash [Fast] > 5x Single Flash [Fast]
Simulated Rotating [Slow] Combination #1: Patterns 1, 3, 5, 7, & 9 [Slow]
Simulated Rotation [Fast] Combination #2: Patterns 2, 4, 6, 8, & 10 [Fast]
SPECIFICATIONS, PATTERNS, & WIRING
COLOR FUNCTION CONNECTION
Black
Ground 12v (-) Chasis Ground
Red
Battery 12v (+) Positive Battery Terminal
Yellow
Pattern/Sync 12v (+) Momentary Switch
WIRING DIAGRAM
SYNCHRONIZATION
1) Tie the yellow wires from each beacon together to
synchronize them. There is no master/slave functionality.
POWER
1) Simply plug the cigarette lighter adapter into your
vehicle's cigarette lighter outlet and turn on the power
switch to activate the unit.
A) If hard-wiring the unit, cut cable 4" inches or
more away from the cigarette lighter adapter to
expose the red, yellow, & black wires.
B) Strip the wire jacketing back to expose the wire.
C) Extend the red wire to a 12v (+) post. Extend the
black wire to a 12v (-) ground.
The AM600 Beacon is bright & can be harmful to your vision.
Wear protective glasses while looking directly at the product.
PATTERN SELECTION
1) Momentarily tap the Pattern Changer wire (yellow) to a 12v
(+) positive terminal to change the pattern.
FENIEX // 2019 // INSTRUCTION MANUAL // v2.2
WEB // www.feniex.com
5
TM
MOUNTING INSTRUCTIONS
PIPE MOUNT (1" NPT)
MAGNET MOUNT
Using the hardware provided, secure the beacon to the
pipe-mount adapter, feeding the wire down through the
center of adapter plate. After making the appropriate
wiring connections, feed the wire through the pipe and
tighten the beacon onto the pipe. Tighten the adjustment
nut to complete the installation.
Using the hardware provided, secure the beacon to
the magnet mount. Besure to feed the wire through the
formed opening before tightening the two components
together.
Pipe Not Included
PERMANENT MOUNT
The beacon comes standard with a permanent mount
ange attached. Simply use the 3 supplied screws to to
secure the beacon to your surface of choice. Be sure to
route the wire accordingly prior to tightening the beacon
to its surface.
FENIEX // 2019 // INSTRUCTION MANUAL // v2.2
WEB // www.feniex.com
6
TM
-
1
-
2
-
3
-
4
-
5
-
6
w innych językach
- English: Feniex am600 User manual
Powiązane dokumenty
Inne dokumenty
-
Yamaha PSR-E413 Instrukcja obsługi
-
-
Yamaha DGX-530 Instrukcja obsługi
-
-
-
-
-
Yamaha DGX630B - 88 Key Portable Grand Instrukcja obsługi