Arlington CE1BL Instrukcja obsługi

Marka
Arlington
Model
CE1BL
Typ
Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Installation Instructions
Install one of Arlington’s low voltage
mounting brackets (not supplied)
at entry and/or exit locations.
Use L
V1
for the single-gang CE1,
and LV2 for the
two-gang CE2.
1 For entry location: Use the
mounting bracket as a
template, and cut hole for
entry location. Feed wires
into the cable entrance
plate. Make sure that the hood is in the desired
orientation; facing in or out.
2 For wire exit: Install low voltage mounting
bracket (repeat above instructions). Fish wires
from behind the wall sur
face and pull through
the bracket. Feed wires into CE1 or CE2 with
the hood in the correct orientation (in or out).
3 Attach both (entry and/or exit) cable entrance
plates to the LV1 or LV2 mounting brackets.
4 Connect wires to electronic equipment.
Catalog
UPC/DEI/NAED
Description
Plate
Unit/Std
Number
Mfg. #018997
Non-metallic Cable Entrance Plate Color
Pkg
CE1 10460 Single gang White 10
CE2 10461 Two gang White 10
Cable Entrance Plates and Hood
Reversible • Non-metallic • Cable protection at its best
NEW!
HOOD on
reverse
1 Stauffer Industrial Park
Scranton, PA 18517
800/233.4717
Fax 570/562.0646
www.aifittings.com
A
A
r
r
l
l
i
i
n
n
g
g
t
t
o
o
n
n
Arlington’s new REVERSIBLE entrance
plate not only protects cable, but
delivers good looks and installation
versatility.
Use it facing IN – or OUT. It’s easy to
install. And, it’s the best way to run
cable where you want it.
• Non-rusting, paintable plastic
• Versatile, easy to use
• Install facing in or out
Includes
screws
that
match
plate
color
CE1
CE2
CE1
w/ plate
facing IN
CE2
w/ plate
facing OUT
See reverse for
Cable Entrance Hood
for decorator plates
LV1
LV2
CE2
w/ plate
facing IN
at
www.aifittings.com
View V
ideo
Patent pending
The SCOOP
™
Cable Entrance Hood for Decorator Plates
Reversible • Non-metallic • Installation versatility
Distributed by
CED1/CE1&2 0408/50M
1 Stauffer Industrial Park
Scranton, PA 18517
800/233.4717
Fax 570/562.0646
w
w
w
w
w
w
.
.
a
a
i
i
f
f
i
i
t
t
t
t
i
i
n
n
g
g
s
s
.
.
c
c
o
o
m
m
A
A
r
r
l
l
i
i
n
n
g
g
t
t
o
o
n
n
©2008 Arlington Industries, Inc.
For good looks and installation
versatility with decorator-style wall
plates, try Arlington’s reversible
non-metallic, single gang entrance
hood.
• Easy to install, facing
IN or OUT
• Protects low voltage
cable against damage.
It’s the best way to run cable
where you need it.
CED1
facing
IN
CED1
facing
OUT
Catalog
UPC/DEI/NAED Description
Plate
Unit/Std
Number Mfg. #018997
Non-metallic Cable Entrance Hood Color Pkg
CED1 10465 Single gang White 10
Includes
two #6
scr
ews
Patent pending
CED1
facing IN
at
www
.aifittings.com
View Video
The SCOOP
™
CED1
facing OUT
LV3
Mounting
Bracket
(not supplied)
Installation Instructions
Use one or more of Arlington’s low voltage
mounting brackets (not supplied) to install
The SCOOP™ – the single-gang
LV1, two-gang
LV2, three-gang LV3 or four-gang LV4.
1
Use the mounting bracket as a template, then
cut hole for entry location. Attach the
mounting bracket to the wall.
2 Feed wires through The SCOOP™ (CED1), with
it facing in or out, as desired. Attach to the
mounting bracket with the supplied screws.
Repeat as many times as necessary.
3
Connect wires to electronic equipment.
Single
gang
LV1
2-gang
LV2
4-gang
LV4
3-gang
LV3
  • Page 1 1
  • Page 2 2

Arlington CE1BL Instrukcja obsługi

Marka
Arlington
Model
CE1BL
Typ
Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla
ściągnij PDF
raport

w innych językach

Inne dokumenty