AWZ508
V1.0
PK2
Relay module
Edition: 4 from 01.03.2018
Supersedes the edition: 3 from 17.06.2013 EN
1. Destination.
The PK2 (AWZ508) relay module is to be used in low-voltage installations. It is intended for controlling and status
indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of
alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module.
It is equipped with two separate T+, T- inputs used to trip relays with high or low condition.
2. Module description.
2.1 Module elements. 3. Specifications.
2.2 Module terminals.
4. Scheme of module connections.
1 – feeding selection jumper
3 – LED diode (signals relay activity)
Voltage of the
relay’s coil
12V (10VDC÷15VDC)
24V (21VDC÷28VDC)
configuration with jumper Z1
Voltage of the
relay’s contacts
Current of the
relay’s contacts
2nd environmental class -10°C ÷ 50°C
L=80, W=43, H=22 [+/- 2mm]
installation tape or installation bolt x2
CE, 2 year from the production date
leads on connections: Ø 0,41÷1,63
(AWG 26-14)
T–,T+ input of voltage controlling relay activity
- IN + module supply input
C1,C2 – common relay clamp
NO1, NO2 – normaly open relay clamp
NC1, NC2 - normaly closed relay clamp
WEEE PARKING
According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste
and to collect such WEEE separately.
Zużytego sprzętu elektrycznego i elektronicznego nie wolno wyrzucać razem ze zwykłymi domowymi odpadami. Według dyrektywy WEEE
obowiązującej w UE dla zużytego sprzętu elektrycznego i elektronicznego należy stosować oddzielne sposoby utylizacji.
Pulsar
Siedlec 150, 32-744 Łapczyca, Poland
Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50
e-mail: biuro@pulsar.pl, sales@pulsar.pl
http:// www.pulsar.pl, www.zasilacze.pl