Pulsar AWZ513 Instrukcja obsługi

Kategoria
Komponenty urządzeń zabezpieczających
Typ
Instrukcja obsługi
AWZ513
v.2.0
PK1
Relay module
Edition: 4 from 10.07.2013
Supersedes the edition: 3 from 10.07.2013 EN
1. Intended use.
The PK1 (AWZ513) relay module is to be used in low-voltage installations. It is intended for controlling and status
indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of
alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. It features a
serial fuse in the circuit of the relay (C, NO, NC).
2. Installation.
The module is equipped with a plastic panel with self-adhesive tape that enables fixing it to a flat surface (side panel of an
enclosure, a buffer PSU, etc.) and holes for bolting the panel to the mounting surface.
3. Description of the module.
3.1 Components. 3.2 Connectors.
4. Specifications.
Fig. 1. General view of the module.
5. Electrical diagram.
-I+ inputs of the voltage that control the relay
C1, C2 common terminal of the relay
NO1, NO2 normally open relay’s contact
NC1, NC2 normally closed relay’s contact
S+ - ‘+’ power output, fuse protected F1
1 relay
2 jumper (J)
3 fuse F2
4 LED (indicates relay’s operations)
5 fuse F1
6 module terminals
Voltage of the relay’s coil
10÷14V DC (-/+5%),
Current of the relay’s coil
25mA@12VDC
Number of relays
1
Voltage of the relay’s contacts
30VDC / 50VAC max.
Current of the relay’s contacts
2A max.
Contacts of relay
C/NC/NO (leads Φ2.05 mm: AWG 24-12)
ON/OFF time
15ms/8ms (-/+5%)
Fuse
F1=2A, F2=0,5A
Operating conditions
2nd environmental class, -10°C÷ 40°C
Enclosure
open-frame design, IP00
Dimensions
L=70, W=43, H=20 [mm, +/-2]
Net/gross weight
0,03 / 0,05 [kg]
Installation
installation tape or installation bolt x2
Declarations, warranty
CE, 2 year from the production date
Notes
leads on connections:Ø 0,41÷1,63
(AWG 26-14),
Ø 0,51÷2,05 (AWG 24-12) - relay contacts
WEEE PARKING
According to the EU WEE Directive It is required not to dispose of electric or electronic waste as unsorted municipal waste
and to collect such WEEE separately.
Zużytego sprzętu elektrycznego i elektronicznego nie wolno wyrzucać razem ze zwykłymi domowymi odpadami. Według dyrektywy WEEE
obowiązującej w UE dla zużytego sprzętu elektrycznego i elektronicznego należy stosować oddzielne sposoby utylizacji.
Pulsar
Siedlec 150, 32-744 Łapczyca, Poland
Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50
e-mail: biuro@pulsar.pl, sales@pulsar.pl
http:// www.pulsar.pl, www.zasilacze.pl
  • Page 1 1

Pulsar AWZ513 Instrukcja obsługi

Kategoria
Komponenty urządzeń zabezpieczających
Typ
Instrukcja obsługi

w innych językach