Allview Visual 360 - camera 360° Instrukcja obsługi

1

VISUAL360

User manual ......................... 4

Instrukcja obsługi……….... 25

Manual de utilizare ............. 47

EN

PL

RO

2

3

EN

LCD display

Power button

/Mode button

Wi-Fi indicator (red)

Power indicator（red

/Charging indicator (blue)

Wi-Fi button/MENU button

Busy indicator (red)

Shutter button

/OK button

Lens×2

Triangle nut

Interface cover (USB/TF)

Speaker

Microphone

Rope hole

Reset hole

1

2

3

4

5

6

7

8

9

10

11

12

13

14

PL

Wyświetlacz LCD

Przycisk zasilania

/zmiany trybu

Wskaźnik Wi-Fi (czerwony)

Wskaźnik zasilania

/ładowania (niebieski)

Przycisk Wi-Fi/MENU

Przetwarzanie (czerwony)

Spust Migawki

/przycisk OK

Soczewka ×2

Miejsce mocowania statywu

Osłona interfejsu (USB/TF)

Głośnik

Mikrofon

Otwór na sznurek

Przycisk resetowania

RO

Afișaj LCD

Buton pornire

/oprire

Indicator Wi-Fi (roșu)

Indicator nivel baterie (rosu)

/ Indicator încărcare (albastru)

Buton Wi-Fi//Meniu principal

Procesare în curs (roșu)

Butonul Declanşare

/OK

Lentile×2

Lăcaș înșurubare trepied

Capac interfață (USB/TF)

Difuzor

Microfon

Gaură șnur

Orificiu resetare dispozitiv

En

4

Overview

Thank you for purchasing this product!

VISUAL360 is a digital panoramic camera with two lenses. Through the application of up-

to-date technologies, it enables you to get panoramic videos and photos, creating an

experience of brand new panoramic world.

Important

 Before using this product, please carefully read this Manual

 The product comes without internal memory, therefore, you need to have prepared

a MicroSD card up to 32GB (Class 6~Class 10);

 Check the camera power.

A full charging is recommended before use (Until the

charging indicator goes out)

 Scan the QR Code on next page, or search for “VISUAL360” on Google Play™,

and then download and install it

 The product is equipped with a built-in battery. Do not put it directly into fire, or it

may cause explosion or other dangers.

 The product may radiate heat due to long-time use or exposure to direct sunlight.

This is normal.

 If the camera stops working or fails to re

spond to any operation during use, use a

needle to press and hold Reset button for about 3 seconds to restart the product.

 Do not use the camera under any environment with temperature lower than 0°C or

En

5

higher than 40°C

; or else it may not turn on normally.

 The provider recommends the usage of a charger with the voltage between 5V/0.5A

~ 5V/2.0A.

 Do not use the camera in humid place, for the humidity may damage important parts

of the camera.

 Do not put the camera directly into water.

 Do not use the camera during charging, for it may cause system halt or other failure

due to improper heat radiation.

 Do not contact the lens with hard arti

cles to avoid any damage.

Notices for the use of device

CAUTION! Please read carefully this instructions and follow them, in the case of dangerous

situations.

Driving safety: It is recommended not to use the device while driving.

Approved service: Only approved repair shops can repair this device. If you open the

device and try to fix it yourself you will void the warranty of the product.

Accesories and batteries: Only accesories and batteries approved by the producer can be

used.

The battery and charging the battery: It is recommended to fully charge before

first use of

the device. Do not expose the battery to temperatures above 40

º

C. Do not dispose the

battery in fire or drop anywhere. Return defective batteries in special centers or to the

supplier center.

Warning: We take no responsibility for situations where the device is used other than as

En

6

Our company reserves the right to make changes in the content of the manual without

making this public. These changes will be posted on the company website to the product

it amends.

The contents of this manual may be different from that in the product. In this last case will

be considered.

To avoid the problems that might occur with the service shops approved by Visual Fan

Ltd. (because Visual Fan reserves the right to stop the collaboration with any

service shop

which was previously approved and mentioned in the waranty card on the date on which

the product batch was sold on the market), before taking a product to the service shop,

please check the updated list of approved service shops on Allview website at the section:

“Support&Service – Approved service”.

For more product details visit www.allviewmobile.com.

All applications provided by third parties and installed in this device, may be modified

and/or stopped at an

y moment. Visual Fan Ltd will not be responsible in any way for

modifications of the services or content of these applications. Any request or question

regarding third party applications may be addressed to owners of these applications.

En

7

Quick start guide

1. Install SD card:

Insert the Micro SD card you prepare into the slot as

indicated, as shown on the right.

Important:

 A high-speed Micro SD card between Class 6~Class 10 is a must; or else, this

product may not work normally.

 Always turn off the camera before inserting or pulling out of the card.

2. Power-on/off

Power-on: Press and hold Power button/Mode button for about 2 seconds and release,

until

it beeps. The display screen will be lighted, as shown below, indicating the product

is ready to work (the default work mode after power-on is Shooting mode).

Micro

SD

En

8

Important:

 If power-on fails, charge the camera first, and see whether the blue indicator lights

up during charging. If yes, it indicates the product is being charged.

Power-off: After shooting stops, press and hold Power button for about 3 seconds and

release. The Display will display “GOODBYE” and turns off. No operation on mainframe

for 1 minutes under Power-save mode (default), the camera will automatically power off.

If you simply wish to shut down the device, press and hold

3 seconds the Power

button/Mode button. The message “GOODBYE” will be displayed and afterwards, the

device will shut down.

3. Charging

Use data cable included in the product pack for camera charging. During charging, the

indicator displays in blue and lights constantly; when charging completed, the blue

indicator goes out.

Important:

 The provider recommends the usage of a charger with the voltage between 5V/0.5A

~ 5V/2.0A.

En

9

4. Recording or shooting

This camera has Recording mode and Shooting mode. After power-on, press MODE

(Power button/Mode button) to switch between different modes, and the corresponding

mode icon will be displayed on the screen.

Video: In Recording mode, press Shutter button, and the camera

get started to work. The display screen displays the video

recording timing.

Stop recording: During recording, press Shutter button to stop it.

The video will automatically be saved on your

camera storage

card. At that moment, the display screen will show remaining time

available for recording as below:

Shooting: In Shooting mode, press Shooting button to take photos.

After shooting, the display screen will display the number

(estimated value) of pictures the available space on you camera

storage card can save.

En

10

5. Menu setting

To operate Menu, press and hold Wi-Fi button for about 2 seconds to enter menu setting

(as shown below):

Menu operation:

 In Menu mode, press Wi-Fi button to move cursor.

 Press Shutter button to confirm.

 Press and hold Wi-Fi button to back to previous menu or exit Menu mode.

Explanation of menu functions:

Power Save: Set Power-save mode. You may set the camera to enter Power-save

mode after a certain period of time. The av

ailable options are 1min/3min/5min or Power-

save mode off.

Date & Time: Set system time for the camera manually.

Language: Set system language for hthe camera, with Romanian as its default language.

Factory Reset: Restore factory default settings.

System: Check system and storage card information.

Format: After formatting, all existing data on the storage card will be lost due to such

formatting. Please be cautious to this operation!

En

11

6. How to use accessories properly

It is strongly recommended to use the accessories originally provided by the

manufacturer. It helps create a better product use experience and better

shooting/recording effect.

Tripod: Screw the tripod nut attached into the screw hole on the bottom of the camera. It

serves both as a hand-held or fixed device.

Fix to use tripod Hold to use tripod

En

12

7. Use of watch remoter (optional accesory)

1. Power button

2. Shooting button

3. Recording button

 Activating the remote: First activate the Wi-Fi of the

camera, then long

press the Power button to connect the remote to the camera.

To deactivate the remote, you need to long press on the Power button.

 Shooting button: In order to capture frames using the remote, press the

Shooting button

 Recording button: To be able to created videoclips using the remot

e, short

press on button 3 from the image above

Play panoramic video or picture

Note: The videos or pictures may be played in right panoramic effect only on smart

mobile phone, panel computer or PC procedures.

En

13

1. Use mobile phone or panel computer to play

Follow these steps to play panoramic videos or pictures on mobile phone or tablet.

Download APP: Scan QR Code from below or search for

“VISUAL360” on Google Play™ to download and install the

product APP.

QR Code:

Please scan this QR Code to get access to Google Play to

download and install

“VISUAL360”

Install

En

14

Connect mobile phone and camera: Connect mobile phone and camera through Wi-Fi

connection

i. Turn on camera Wi-Fi: Press camera Wi-Fi button, and the display screen will display

“WI-FI ON”, and then “VISUAL360”, and initial password is “1234567890”.

ii. Turn on mobile phone Wi-Fi, search for “VISUAL360” and

select Connect.

iii. If connected, the camera display screen will display as

below picture.

Wi-Fi name

En

15

Opening app: Activate “VISUAL360” APP on mobile phone or tablet, and click the upper

right corner to “Search for Camera”.

Download: Enter camera folder, select the file to be downloaded and click to download.

Play: Select the file on mobile phone and click to play.

VISUAL360

2016-07-15

En

16

Important

 The video recordings/photographs created with VISUAL360 will be

automatically saved, by default, on the micro SD memory card. In order to save

them on a phone/tablet, you need to download them from the micro SD card.

They will be automatically saved on the following path: File manager – DCIM –

VISUAL360. You can move afterwards the files wherever you would choose.

 It is recommended to follow the above steps in order to achieve the best HD

video or

picture playing effect.

 Before connection, remember to make sure the SD card properly inserted into

camera.

 Do not use the player of mobile phone or panel computer to play videos or

pictures taken by this camera, or else the effect will be like this:

En

17

Effect of panoramic playing

The following effects are available if played on APP player

Planet mode

Panoramic mode

VR mode

En

17

18

2. Use PC or notebook to play

You may use your PC to acquire a better playing experience, or edit/share videos. It can

be completed by following the steps as shown below:

Download and install player: Open PC browser and visit

www.allviewmobile.com/VISUAL360/app to download and install “VISUAL360 video

converter” .

Download video or picture onto PC:

 Use the USB data cable attached to this product to connect the camera and PC.

After connection, the camera display screen will display “MSDC”.

 Open “My computer” to select “VIDEO” OR “JPG” folder under “Removable disks”.

Select file to be downloaded and download it into location specified on PC.

En

18

19

Run player: Open the video or picture downloaded and stored on PC in the player.

Click the icon , choose the video which you want to play.

En

20

When playing the video, move the mouse to top right cone, it will show some different

mode(Plane/Planet/Invert). Clip it and will show different effects. Please clip and move

the mouse, you could enjoy the video with full angle 360 degree.

En

Strona jest ładowana ...

Allview Visual 360 - camera 360° Instrukcja obsługi

Allview Visual 360 - camera 360° Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty