ACT1030 Proximity
Reader
Installation instructions for the
ACT1030 VRC
White
Green
Blue
Red
Black
Brown
Yellow
Orange
Sense
Clock / Data1
Data / Data 0
+5v
0v
Red Led
Grn Led
(Buzzer Ctrl)
Wiring for Clock and Data / Wiegand Reader
The standard wiring colours for
ACT1030 Proximity reader is
shown above. Readers should
be a maximum of 30m from the
controller when powered from +5V
and a maximum of 100m when
powered from +12V.
U nit 8 Tallaght B usiness Centre, W hitestown, T allaght, Dublin 24, Ireland.
Telephone: 353 1 462 2585. T elefax: 353 1 462 2587. E -mail: s ales @ accesscontrol.ie W eb: www.accesscontrol.ie
1. Connect the ACT1030 Proximity reader to the
controller with the aid of the wiring diagram
supplied
2. Remove the plastic caps from the ACT1030 and
position the reader in the mounting location.
3. Place the ACT1030 VRC over the ACT1030 reader
and using the self-tapping security screws and
security driver bit supplied, fix the cover and reader
in place.
ACT1030 VRC
Self-tapping Security screw
-
1
