Fibaro Home Center Lite Instrukcja obsługi

Thank You

for purchasing

Home Center Lite

PL

EN

DE

FR

ES

PT

Menu

english..........................................

polski............................................

deutsch........................................

français.........................................

español.........................................

português.....................................

5

17

29

41

53

65

русский.........................................

89

RU

magyar.........................................

101

HU

italiano.....................................

77

IT

2

www.manuals.ﬁbaro.com

3

4

5

IMPORTANT!

Read the manual before attempting to use the device!

For more information about FIBARO System, like video guides, technical manuals, conﬁguration parameters

and declarations, visit our website: manuals.ﬁbaro.com. If you still need some assistance, contact our

Technical Support or a closest certiﬁed FIBARO reseller which can be found at www.ﬁbaro.com.

Note:

Some of the FIBARO System components installation may involve mains voltage connection.

It can be dangerous. If you are not sure how to install the devices, use a certiﬁed installer’s services.

Support

EN

Do not expose this product to moisture, water or other liquids.

This product is designed for indoor use only. Do not use outside!

Do not attempt to examine or repair this product yourself.

Contents

AC/DC Adapter Ethernet Cable

Antenna Home Center Lite

6

1. Connect antenna 2. Connect ethernet cable

3. Connect power adapter 4. Turn on Home Center Lite

Start from connecting the antenna,

by turning the mounting screw clockwise.

Connect the included power adapter

to Home Center Lite and plug it to the mains

socket.

Using the included ethernet cable,

connect Home Center Lite’s LAN port to a

router in order to connect the gateway to

internet.

Press the POWER button brieﬂy.

Your Home Center Lite will be ready

to work in few seconds.

7

Your Local Network

Connect your Home Center Lite with a router using the

included LAN cable and start the gateway. From now on

Home Center Lite will be visible to all devices within your

local area network (LAN).

Remote Access

By default the Home Center Lite is visible only within your local

network. To enable remote access from outside of your local

network, conﬁgure a home.ﬁbaro.com account.

Internet Modem

Smartphone Tablet

Home Center Lite

Computer

8

LED diodes

LEDs located on the front panel of the Home

Center Lite enclosure have the following

purpose:

Power

Glows when the power supply is on.

Lan Network

Glows when the HCL is connected

to the local network.

Internet

Glows when the HCL is connected

to the internet.

Z-Wave

Blinks when the HCL sends commands

to the Z-Wave network devices.

Update available

Blinks when a software update is available.

9

First launch on desktop

1

2

3

4

5

6

7

Go to www.ﬁbaro.com/support and download FIBARO Finder.

Launch FIBARO Finder and click Refresh.

Select your Home Center Lite and click Connect.

Log in with the defaults: admin / admin

Select Conﬁguration from the main menu.

Scroll down to the bottom and click Start upgrade

(if not visible - wait a few minutes and refresh the page).

When a new software is installed, log back in.

10

First launch on mobile devices

Download FIBARO mobile app appropriate for your device.

For iPhone: www.ﬁbaro.com/ios-app

For Android: www.ﬁbaro.com/android-app

Select your Home Center Lite from the list.

Log in with the defaults: admin / admin

Follow the steps of the conﬁguration wizard.

1

2

3

5

6

4

Launch downloaded app.

11

Create Rooms

When setting up your intelligent home start with

creating rooms to reﬂect the layout of your home.

Select Rooms from the main menu.

1

2

3

4

Rooms DevicesYour home

Sections

Section is a group of rooms in your home.

Section may be whole ﬂoor or a few rooms.

Add Section

Section Name Add

Name the room and choose the section

to which you would like to add it.

Add Room

AddRoom Name Section

Change an icon

Each room can be represented by the

unique icon. You can change the icons in

the advanced room’s settings.

Rooms

12

Add devices

After creating the rooms you can start

adding the devices.

Devices ScenesRooms

Select “Devices” from the main menu.

Select the “Add or remove device” option from the

left side menu. Click “Add” to start adding a new

device (learning mode).

Add or remove device

The timer will count down the time (30 sec by

default) for you to add a new device to the Z-Wave

network (inclusion).

Note that the device needs to be located within

direct range of the Home Center Lite during the

inclusion process.

Please refer to each device’s manual for further

information on how to include it into the Z-Wave

network.

Danger of electrocution! If you are not sure how

to connect a device to the wires, please contact

a qualiﬁed installer.

NOTE:

13

Conformity with EU directives:

RED 2014/53/EU

RoHS 2011/65/EU

RoHS 2015/863

Simpliﬁed EU declaration of conformity:

Hereby, Fibar Group S.A. declares that the device is in compliance with Directives

2014/53/EU and 2011/65/EU, 2015/863. The full text of the EU declaration of conformity

is available at the following internet address: www.manuals.ﬁbaro.com

WEEE Directive Compliance:

Device labelled with this symbol should not be disposed with other household wastes.

It shall be handed over to the applicable collection point for the recycling of waste

electrical and electronic equipment.

Speciﬁcations:

Power supply:

Network interface:

Operating temperature:

Radio protocol:

Radio frequency:

Dimensions (L x W x H):

9-12 VDC (included)

10/100 Base-T Ethernet (RJ-45)

10-40°C

Z-Wave

90 x 90 x 33 mm

ATTENTION!

This product is not a toy. Keep away from children and animals!

Maximum transmit power: 0dBm

EU 868.40/868.42 MHz; HK 919.82/919.80 MHz;

ANZ 921.40/921.42 MHz; RU 869.00/869.02 MHz;

14

Guarantee terms and conditions

1. FIBAR GROUP S.A. with its registered ofﬁce in Wysogotowo, ul.

Serdeczna 3, 62-081 Wysogotowo, entered into the Register of

Entrepreneurs of the National Court Register maintained by the District

Court for Poznań-Nowe Miasto and Wilda in Poznań, VIII Commercial

Division of the National Court Register (KRS) under number: 553265,

NIP 7811858097, REGON: 301595664, share capital PLN 1,182,100

paid in full, other contact information is available at:

www.ﬁbaro.com (hereinafter „the Manufacturer”) guarantees that

the device sold (hereinaftr: „the Device” is free from material and

manufacturing defects.

2. The Manufacturer shall be responsible for malfunctioning of the Device

resulting from physical defects inherent in the Device that cause its

operation to be incompatible with the speciﬁcations within the period of:

• 24 months from the date of purchase by the consumer,

• 12 months from the date of purchase by a business customer

(the consumer and business customer are further collectively referred

to as „Customer”).

3. The Manufacturer shall remove any defects revealed during the

guarantee period, free of charge, by repairing or replacing (at the sole

discretion of the Manufacturer) the defective components of the Device

with new or regenerated components. The manufacturer reserves the

right to replace the entire Device with a new or regenerated device.

The Manufacturer shall not refund money paid for the device.

4. Under special circumstances, the Manufacturer may replace the Device

with a different device most similar in technical characteristics.

5. Only the holder of a valid guaranty document shall be entitled to make

claims under guarantee.

6. Before making a complaint, the Manufacturer recommends

using the telephone or online support available at

https://www.ﬁbaro.com/support/.

7. In order to make a complaint, the Customer should contact the

Manufacturer via the email address given at

https://www.ﬁbaro.com/support/.

8. After the complaint has been properly ﬁled, the Customer will receive

contact details for the Authorized Guarantee Service („AGS”).

The customer should contact and deliver the Device to AGS.

Upon receipt of the Device, the manufacturer shall inform the Customer

of the return merchandise authorization number (RMA).

9. Defects shall be removed within 30 days from the date of delivering

the Device to AGS. The guarantee period shall be extended by the time

in which the Device was kept by AGS.

10. The faulty device shall be provided by the Customer with complete

standard equipment and documents proving its purchase.

11. The cost of transporting the Device in the territory of the Republic

of Poland shall be covered by the Manufacturer. The costs of the Device

transport from other countries shall be covered by the Customer. For

unjustiﬁed complaints, AGS may charge the Customer with costs

related to the case.

12. AGS shall not accept a complaint claim when:

• the Device was misused or the manual was not observed,

• the Device was provided by the Customer incomplete, without

accessories or nameplate,

• it was determined that the fault was caused by other reasons than

a material or manufacturing defect of the Device

• the guarantee document is not valid or there is no proof of purchase,

13. The guarantee shall not cover:

• mechanical damages (cracks, fractures, cuts, abrasions, physical

deformations caused by impact, falling or dropping the device or other

object, improper use or not observing the operating manual);

• damages resulting from external causes, e.g.: ﬂood, storm, ﬁre,

lightning, natural disasters, earthquakes, war, civil disturbance, force

majeure, unforeseen accidents, theft, water damage, liquid leakage,

battery spill, weather conditions, sunlight, sand, moisture, high or low

temperature, air pollution;

• damages caused by malfunctioning software, attack of a computer

virus, or by failure to update the software as recommended by the

Manufacturer;

• damages resulting from: surges in the power and/or

telecommunication network, improper connection to the grid in a

manner inconsistent with the operating manual, or from connecting

other devices not recommended by the Manufacturer.

• damages caused by operating or storing the device in extremely

adverse conditions, i.e. high humidity, dust, too low (freezing) or too

high ambient temperature. Detailed permissible conditions for operating

the Device are deﬁned in the operating manual;

• damages caused by using accessories not recommended by the

Manufacturer

• damages caused by faulty electrical installation of the Customer,

including the use of incorrect fuses;

• damages caused by Customer’s failure to provide maintenance

and servicing activities deﬁned in the operating manual;

• damages resulting from the use of spurious spare parts

or accessories improper for given model, repairing and introducing

alterations by unauthorized persons;

• defects caused by operating faulty Device or accessories.

14. The guarantee shall not cover natural wear and tear of the Device

and its components listed in the operating manual and in technical

documentation as such elements have a deﬁned operational life.

15. The Device Guarantee shall not exclude, limit or suspend the

Customer’s warranty rights.

16. The Manufacturer shall not be liable for damages to property caused

by defective device. The Guarantor shall not be liable for indirect,

incidental, special, consequential or punitive damages, or for any

damages, including, inter alia, loss of proﬁts, savings, data,

loss of beneﬁts, claims by third parties and any other damages arising

from or related to the use of the Device.

15

16

17

WAŻNE!

Przeczytaj instrukcję przed uruchomieniem urządzenia!

Więcej informacji na temat Systemu FIBARO, jak ﬁlmy instruktażowe, instrukcje techniczne, parametry

zaawansowane i deklaracje znajdziesz na stronie manuals.ﬁbaro.com. Jeśli nadal potrzebujesz pomocy,

skontaktuj się z naszym działem Wsparcia Technicznego lub najbliższym autoryzowanym sprzedawcą

FIBARO, których znajdziesz na stronie: www.ﬁbaro.com

Wskazówka:

Instalacja niektórych urządzeń FIBARO wymaga podłączenia do napięcia sieciowego, co może być

niebezpieczne. Jeśli nie masz pewności, jak zainstalować urządzenie, skorzystaj z usług autoryzowanego

instalatora.

Wsparcie

PL

Nie wystawiać urządzenia na działanie wilgoci, wody lub innych cieczy.

Ten produkt jest przeznaczony wyłącznie do użytku wewnątrz pomieszczeń. Nie używać na zewnątrz!

Nie należy podejmować prób samodzielnego rozbierania, napraw lub modyﬁkacji urządzenia.

Zawartość opakowania

Zasilacz Kabel ethernetowy

Antena Home Center Lite

18

1. Zamontuj antenę 2. Podłącz kabel ethernetowy

3. Podłącz zasilacz 4. Włącz Home Center Lite

Zacznij od przykręcenia anteny

zgodnie z ruchem wskazówek zegara.

Podłącz zasilacz do Home Center Lite,

a jego wtyczkę sieciową do gniazda sieci

elektrycznej.

Kablem ethernetowym połącz złącze

LAN Home Center Lite ze swoim routerem,

aby podłączyć centralę do internetu.

Przyciśnij krótko przycisk POWER.

Po chwili Home Center Lite będzie

gotowa do pracy.

19

Twoja sieć lokalna

Gdy już połączysz swoją Home Center Lite z routerem za

pomocą kabla sieciowego i włączysz centralę, będzie ona

widoczna dla wszystkich urządzeń w Twojej sieci lokalnej (LAN).

Dostęp zdalny

Domyślnie Twoja centrala jest widoczna wyłącznie w sieci lokalnej.

Aby umożliwić dostęp zdalny, spoza sieci lokalnej, skonﬁguruj swoje

konto na stronie dom.ﬁbaro.com.

Internet Modem

Smartfon Tablet

Home Center Lite

Komputer

20

Strona jest ładowana ...

Fibaro Home Center Lite Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Fibaro Home Center Lite Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty