Indesit DFG 26B10 NX EU instrukcja

Marka: Indesit

Model: DFG 26B10 NX EU

Kategoria: Zmywarki

Typ: instrukcja

DFG 26B10

English

Operating instructions

DISHWASHER - Contents

Operating instructions,1

Precautions and advice, 2-3

Product Data, 6

Assistance, 8

Installation, 9-10

Description of the appliance, 11

Refined salt and rinse aid, 12

Loading the racks, 13-14

Detergent and dishwasher use, 15

Wash cycles, 16

Special wash cycles and options, 17

Care and maintenance, 18

Troubleshooting, 19

Kullanım talimatları

BULAŞIK MAKİNESİ - İçindekiler

Kullanım talimatları, 1

Önlem ve öneriler, 4-5

Ürün bilgi sayfası, 7

Servis, 8

Montaj, 31-32

Cihazın tanımı, 33

Rane tuz ve

parlatıcı

, 34

Raarın yerleştirilmesi, 35-36

Deterjan ve bulaşık makinesi kullanımı, 37

Yıkama

programları

, 38

Özel programlar ve Opsiyonlar

, 39

Temizlik ve bakım, 40

Sorun Giderme, 41

Polski

Instrukcja obsługi

ZMYWARKA - Spis treści

Instrukcja obsługi,1

Zalecenia i środki ostrożności, 3-4

Karta produktu, 6

Serwis Techniczny, 8

Instalacja, 20-21

Opis urządzenia, 22

Sól regeneracyjna i środek nabłyszczający, 23

Ładowanie koszy, 24-25

Środek myjący i obsługa zmywarki, 26

Programy, 27

Programy specjalne i opcje, 28

Konserwacja i obsługa, 29

Nieprawidłowe działanie i możliwe środki zaradcze, 30

Türkçe

Precautions and advice

This appliance was designed and

manufactured in compliance with international

safety standards. The following information

has been provided for safety reasons and

should be read carefully.

Keep this instruction manual in a safe place

for future reference. If the appliance is sold,

given away or moved, make sure the manual

is kept with the machine.

Read the instructions carefully, as they

include important information on safe

installation, use and maintenance.

This appliance was designed for domestic

use or similar applications, for example:

- farmhouses;

- use by guests in hotels, motels and other

residential settings;

- bed & breakfasts.

Remove the appliance from all packaging

and make sure it was not damaged during

transportation. If it was damaged, contact the

retailer and do not proceed any further with

the installation process.

General safety

• This appliance should not be operated

by children younger than 8 years, people

with reduced physical, sensory or mental

capacities, or inexperienced people who

are not familiar with the product, unless they

are given close supervision or instructions

on how to use it safely and are made aware

by a responsible person of the dangers its

use might entail.

• Children must not play with the appliance.

• It is the user's responsibility to clean and

maintain the appliance. Children should

never clean or maintain it unless they are

given supervision.

• The appliance was designed for domestic

use inside the home and is not intended for

commercial or industrial use.

• The appliance must be used to wash

domestic crockery in accordance with the

instructions in this manual.

• The appliance must not be installed

outdoors, even in covered areas. It is

extremely dangerous to leave the machine

exposed to rain and storms.

• Do not touch the appliance when barefoot.

• When unplugging the appliance always

pull the plug from the mains socket. Do not

pull on the cable.

• The water supply tap must be shut off

and the plug should be removed from

the electrical socket at the end of every

cycle and before cleaning the appliance

or carrying out any maintenance work.

• The maximum number of place settings is

shown in the product sheet.

• If the appliance breaks down, do not under

any circumstances touch the internal parts

in an attempt to perform the repair work

yourself.

• Do not lean or sit on the open door: this

may cause the appliance to overturn.

• The door should not be left open as it may

create a dangerous obstacle.

• Keep detergent and rinse aid out of reach

of children.

• The packaging material should not be used

as a toy.

• Knives and other utensils with sharp

edges must be placed either with the

points/blades facing downwards in the

cutlery basket or horizontally on the tip-up

compartments or in the tray/third basket,

if available.

• Connect the appliance to the water mains

using the new supply hose provided with

the appliance. Do not re-use the old hose.

Install the back side of a free-standing

dishwasher against a wall.

Disposal

• To dispose of any packaging materials,

follow local legislation so that the

packagings may be reused.

• The European Directive 2012/19/EU

relating to Waste Electrical and Electronic

Equipment (WEEE) states that household

appliances should not be disposed of

using the normal solid urban waste cycle.

Exhausted appliances should be collected

separately in order to optimise the cost of

reusing and recycling the materials inside

the machine, while preventing potential

damage to the atmosphere and public

health. The crossed-out dustbin symbol

shown on all products reminds the owners

of their obligations regarding separated

waste collection.

For further information relating to the correct

disposal of household appliances, owners

may contact the relevant public authority or

the local appliance dealer.

Saving energy and respecting the

environment

Saving water and energy

• Only begin a wash cycle when the

dishwasher is full. While waiting for the

dishwasher to be filled, prevent unpleasant

odours with the Soak cycle

(if available, see

Wash Cycles).

• Select a wash cycle that is suited to the type

of crockery and to the soil level using the

Table of Wash Cycles:

- For dishes with a normal soil level, use

the Eco wash cycle, which guarantees low

energy and water consumption levels.

- If the load is smaller than usual activate

the Half Load option

(see Special wash cycles

and options, if available).

• If your electricity supply contract gives

details of electricity-saving time bands, run

the wash cycles when electricity prices are

lower. The Delayed Start option can help

you organise the wash cycles accordingly

(see Special wash cycles and options, if available).

Zalecenia i środki ostrożności

Niniejsze urządzenie zostało

zaprojektowane i wyprodukowane zgodnie z

międzynarodowymi normami bezpieczeństwa.

Poniższe ostrzeżenia podane zostały ze

względów bezpieczeństwa i należy je uważnie

przeczytać.

Należy zachować niniejszą książeczkę

instrukcji dla przyszłych konsultacji. W

przypadku sprzedaży, odstąpienia lub

przeprowadzki należy dopilnować, aby została

przekazana wraz z urządzeniem nowemu

właścicielowi.

Uważnie przeczytać instrukcję: zawiera

ona ważne informacje dotyczące instalacji,

użytkowania i bezpieczeństwa.

To urządzenie zostało zaprojektowane do

użytku domowego lub podobnych zastosowań,

na przykład:

- w domach kolonijnych;

- do użytku przez klientów w hotelach, motelach

i innych obiektach typu mieszkaniowego;

- w pensjonatach bed and breakfast.

Rozpakować urządzenie i sprawdzić, czy nie

zostało uszkodzone podczas transportu. Jeśli

okazałoby się uszkodzone, nie podłączać go,

lecz skontaktować się ze sprzedawcą.

Bezpieczeństwo ogólne

• Niniejsze urządzenie może być używane

przez dzieci powyżej 8 roku życia oraz

osoby o ograniczonych zdolnościach

fizycznych, zmysłowych i umysłowych

lub nie posiadające jego odpowiedniej

znajomości lub doświadczenia, pod

warunkiem, że znajdują się one pod ścisłym

nadzorem odpowiedzialnej za nie osoby

bądź też otrzymały instrukcje dotyczące

bezpiecznego użytkowania urządzenia oraz

zrozumiały związane z nim zagrożenia.

• Dzieci nie powinny bawić się urządzeniem.

• Czyszczenie oraz konserwację urządzenia

musi przeprowadzać użytkownik. Nie mogą

być one przeprowadzane przez dzieci bez

nadzoru.

• Urządzenie jest przeznaczone do użytku

nieprofesjonalnego wewnątrz pomieszczeń

mieszkalnych.

• Urządzenie powinno być używane do mycia

naczyń w warunkach domowych zgodnie z

niniejszymi instrukcjami.

• Urządzenia nie należy instalować na

świeżym powietrzu, nawet w miejscu

zadaszonym, gdyż wystawienie go na

działanie deszczu i burz jest bardzo

niebezpieczne.

• Nie dotykać zmywarki, stojąc boso na

podłodze.

• Przy wyjmowaniu wtyczki z gniazdka nie

ciągnąć za kabel, lecz trzymać za wtyczkę.

• Po zakończeniu każdego cyklu i przed

przystąpieniem do czyszczenia i konserwacji

urządzenia należy zamknąć zawór wody i

wyjąć wtyczkę z gniazdka.

• Maksymalna ilość nakryć jest podana w

karcie produktu.

• W razie uszkodzenia w żadnym wypadku

nie ingerować w wewnętrzne mechanizmy

urządzenia i nie próbować go samodzielnie

naprawiać.

• Nie opierać się ani nie siadać na otwartych

drzwiach: urządzenie mogłoby się

przewrócić.

• Nie należy pozostawiać otwartych drzwi

zmywarki, gdyż można się o nie potknąć.

• Trzymać detergenty i płyn nabłyszczający

z dala od dzieci.

• Opakowania nie są zabawkami dla dzieci.

• Noże i przyrządy o ostrych krawędziach

należy wkładać do kosza na sztućce, tak

aby czubki/ostrza były skierowane do

dołu, lub układać w położeniu poziomym

na półeczkach lub na tacy/trzecim koszu w

modelach, w których są one zainstalowane.

• Należy podłączyć urządzenie do sieci wodnej,

stosując nowy przewód doprowadzający

wodę; nie należy używać starego przewodu.

Podczas ustawiania zmywarek

wolnostojących, tylna część musi być

zwrócona w kierunku ściany.

Utylizacja

• Utylizacja materiałów opakowaniowych:

dostosować się do lokalnych przepisów;

w ten sposób opakowanie będzie mogło

zostać ponownie wykorzystane.

• Dyrektywa wspólnotowa 2012/19/EU w

sprawie zużytego sprzętu elektrycznego

i elektronicznego (WEEE) przewiduje,

że sprzęt gospodarstwa domowego nie

powinien być usuwany jako nieposortowane

odpady komunalne. Zużyte urządzenia

powinny podlegać selektywnej zbiórce w

celu uzyskania maksymalnego wskaźnika

odzysku i recyklingu ich materiałów

składowych oraz uniknięcia ewentualnych

zagrożeń dla zdrowia i środowiska. Symbol

przekreślonego kosza umieszczany jest na

wszystkich produktach w celu przypominania

o obowiązku segregacji odpadów.

W celu uzyskania bliższych informacji na

temat prawidłowego złomowania urządzeń

gospodarstwa domowego ich właściciele

mogą się zwrócić do właściwych służb

publicznych lub do sprzedawców tych

urządzeń.

Oszczędność i ochrona środowiska

Oszczędność wody i energii

• Uruchamiać zmywarkę tylko z pełnym

ładunkiem. W oczekiwaniu na napełnienie

maszyny zapobiegać przykrym zapachom

przy pomocy cyklu namaczania

(jeśli jest on

dostępny - zob. Programy).

• Wybierać programy odpowiednie do rodzaju

naczyń i stopnia zabrudzenia, stosując się

do Tabeli programów:

- dla naczyń normalnie zabrudzonych

stosować program Eco, który zapewnia

niskie zużycie energii i wody.

- przy ograniczonym ładunku włączyć opcję

Połowa ładunku

(

jeśli jest on dostępny - zob.

Programy specjalne i opcje).

• Jeśli zawarta umowa na dostawę energii

elektrycznej przewiduje strefy czasowe

oszczędności energetycznej, uruchamiać

zmywarkę w godzinach obowiązywania

niższej taryfy. Opcja Opóźnienia startu

może pomoc w takiej organizacji zmywania

(jeśli jest ona dostępny - zob. Programy specjalne i opcje).

Önlem ve öneriler

Bu makine, uluslararası güvenlik

standartlarına uygun olarak tasarlanmış ve

üretilmiştir. Aşağıdaki bilgiler güvenlik

nedeniyle verilmiştir ve dikkatle okunmalıdır.

Bu kullanım kılavuzunu, gelecekte referans

olarak kullanmak üzere saklayın. Cihazı

satarsanız, birine hediye ederseniz veya

başka bir yere taşırsanız, kullanım kılavuzunu

da vermeyi ihmal etmeyin.

Güvenli montaj, kullanım ve bakım hakkında

önemli bilgiler içerdiğinden talimatları dikkatle

okuyun.

Bu cihaz, evde kullanmanın yanı sıra

benzeri uygulamalarda da kullanılmak üzere

tasarlanmıştır; örneğin:

- çiftlik evleri;

- oteller, moteller ve diğer yerleşim türü

ortamlarında müşteriler tarafından;

- oda-kahvaltı sistemiyle hizmet veren turistik

tesisler.

Cihazı ambalajından çıkarın ve nakliye

sırasında hasar görüp görmediğini kontrol

edin. Hasar görmüşse, satıcıyla temasa geçin

ve montaj işlemine başlamayın.

Genel güvenlik

• Bu cihaz, gözetim altında olmadan

veya ürünün nasıl güvenli bir şekilde

kullanılacağına dair talimatlar verilmeden

ya da kullanımının neden olacağı tehlikeler

konusunda sorumlu bir kişi tarafından

uyarılmadan 8 yaşından küçük çocuklar,

fiziksel, ruhsal veya akli durumları

yeterli olmayan kişiler ya da ürünü

tanımayan tecrübesiz kişiler tarafından

kullanılmamalıdır.

• Çocuklar cihazla oynamamalıdır.

• Cihazın temizlenmesi ve bakımı kullanıcının

sorumluluğundadır. Çocuklar gözetim

altında olmaksızın kesinlikle temizlik veya

bakım işi yapmamalıdır.

• Cihaz ev içi kullanım için tasarlanmıştır

ve ticari veya endüstriyel kullanım

amaçlanmamıştır.

• Cihaz, ev bulaşıklarının bu kullanım

kılavuzunda belirtilen şekilde yıkanması

için kullanılmalıdır.

• Cihaz, üzeri kapatılarak olsa bile açık

alanlara kurulmamalıdır. Makinenin yağmur

ve fırtınaya maruz bırakılması son derece

tehlikelidir.

• Ayaklarınız çıplakken cihaza dokunmayın.

• Cihazı şten çekerken, daima şi duvardaki

elektrik prizinden çekin, kablodan çekmeyin.

Kablosunu çekmeyin.

• Her yıkama çevriminden sonra, cihazı

temizlemeden önce veya bakım yapmadan

önce su musluğu kapatılmalı ve ş elektrik

prizinden çıkarılmalıdır.

• Maksimum yerleşim ayarı sayısı ürün bilgi

sayfasında belirtilmiştir.

• Makine arızalanırsa, hiçbir koşulda makineyi

kendiniz tamir etmeye çalışmayın ve

makinenin iç kısımlarına dokunmayın.

• Cihazın açık kapağına yaslanmayın,

üzerine oturmayın; cihaz devrilebilir.

• Kapak, tehlikeli bir engel yaratabileceği için

açık bırakılmamalıdır.

• Deterjan ve parlatıcıyı çocukların

erişemeyeceği bir yerde muhafaza edin.

• Ambalaj malzemeleri oyuncak gibi

kullanılmamalıdır.

• Bıçaklar ve diğer keskin kenarlı nesneler, uç

kısımları/bıçakları çatal-bıçak sepeti içinde

aşağı doğru gelecek veya açılır-kapanır

bölmelerin üzerinde ya da tepsinin/üçüncü

sepetin (varsa) içinde yatay duracak

biçimde yerleştirilmelidir.

• Cihazla birlikte verilen besleme hortumunu

kullanarak cihazı su şebekesine bağlayın.

Eski hortumu tekrar kullanmayın.

Solo bulaşık makinesini arkası bir duvara

gelecek şekilde kurun.

Elden Çıkarma

• Ambalaj malzemelerini elden çıkarırken, bu

malzemelerin yeniden kullanılabilmesi için

yerel yönetmeliklere uyun.

• Atık Elektrikli ve Elektronik Ekipmanların

(AEEE) elden çıkarılması hakkında Avrupa

birliği Direktifi 2012/19/EU, elektrikli ev

aletlerinin normal evsel atıklar gibi elden

çıkarılmaması gerektiğini belirtmektedir.

Kullanım ömrünü tamamlayan cihazlar,

halk sağlığına ve atmosfere verilebilecek

olası zararların önlenmesi ve makinenin

üretiminde kullanılan malzemelerin yeniden

kullanım ve geri dönüşüm masraarının

azaltılması için ayrı olarak toplanmalıdır.

Tüm ürünlerin üzerinde bulunan üzeri çarpı

işaretli çöp kovası simgesi, bu ürünlere ait

atıkların ayrı bir şekilde toplanması gerektiği

konusunda ürünün kullanıcılarını uyarır.

Konutlarda kullanılan elektrikli cihazların

doğru bir şekilde elden çıkarılması

konusunda ayrıntılı bilgi edinmek için

ilgili kamu kurumuna ya da yerel bayinize

başvurabilirsiniz.

Enerji tasarrufu ve çevreye saygı

Su ve enerji tasarrufu

• Sadece bulaşık makinesi dolu olduğu

zaman yıkama çevrimini başlatın. Bulaşık

makinesinin dolmasını beklerken, sudan

geçirme çevrimiyle istenmeyen kokuların

oluşmasını önleyin

(varsa, bkz. Yıkama

Çevrimleri)

• Yıkama Çevrimleri Tablosunu kullanarak

bulaşıkların kirlilik seviyesine ve bulaşık

tipine uygun olan yıkama çevrimini seçin:

- Normal kirlilik seviyesindeki tabaklar için,

düşük enerji ve su tüketimi seviyelerini

temin eden Ekonomik yıkama çevrimini

kullanın.

- Normalden az miktarda bulaşık varsa,

Yarım Yükleme seçeneğini kullanın

(varsa,

Özel yıkama çevrimleri ve seçeneklerine

bakın).

• Elektrik tedarikçiniz indirimli elektrik

tarifeleri hakkında bilgi vermişse, yıkama

çevrimlerini elektrik yatlarının düşük olduğu

zamanlarda gerçekleştirin. GECİKMELİ

BAŞLATMA seçeneği, yıkama çevrimlerini

buna göre organize etmenize yardımcı

olabilir

(

varsa, Özel yıkama çevrimleri ve

seçeneklerine bakın ).

Product Fiche

Brand

INDESIT

Model

DFG 26B10

Rated capacity in standard place settings (1)

Energy efciency class on a scale from A+++ (low consumption) to D (high consumption)

A+

Energy consumption per year in kWh (2)

295

Energy consumption of the standard cleaning cycle in kWh

1.04

Power consumption of the off-mode in W

0.5

Power consumption of the left-on mode in W

5.0

Water consumption per year in litres (3)

3080

Drying efcacy class on a scale from G (low efcacy) to A (high efcacy)

Programme time for standard cleaning cycle in minutes

190

The duration of the left-on mode in minutes

Noise in dB(A) Re 1pW

Built-in model

NOTES

1) The information on the label and che relates to the standard cleaning cycle, this programme is suitable to clean normally soiled

tableware and it is the most efcient programme in terms of combined energy and water consumption. The standard cleaning cycle

corresponds to the Eco cycle.

2) Based on 280 standard cleaning cycles using cold water ll and the consumption of the low power modes. Actual energy

consumption depends on how the appliance is used.

3) Based on 280 standard cleaning cycles. Actual water consumption depends on how the appliance is used.

Product Data (product fiche)

Karta produktu

Marka

INDESIT

Nazwa modelu

DFG 26B10

Pojemność znamionowa, wyrażona liczbą standardowych kompletów naczyń (1)

Klasa efektywności energetycznej, skla od A+++ (niskie zużycie) do D (wysokie zużycie)

A+

Zużycie energii w kWh rocznie (2)

295

Zużycie energii w standardowym cyklu zmywania w kWh

1.04

Zużycie energii w trybie wyłączenia i trybie czuwania w W

0.5

Zużycie energii w trybie włączenia i trybie czuwania w W

5.0

Roczne zużycie wody w litrach rocznie (3)

3080

Klasa efektywności suszenia, skala od G (minimalna efektywność) do A (maksymalna efektywność)

Czas programu dla standardowego cyklu zmywania w minutach

190

Czas trwania trybu czuwania w minutach

Poziom emitowanego hałasu w dB(A) re1 pW

Model do zabudowy

Nie

Uwagi

1) Informacja, że cykl jest odpowiedni do zmywania normalnie zabrudzonych zastaw stołowych oraz że jest najbardziej efektywnym

programem pod względem łącznego zużycia energii i wody dla tego rodzaju zastawy stołowej; Standardowy cykl zmywania odpowiada

cyklowi Eco.

2) Na podstawie 280 standardowych cykli zmywania, przy użyciu zimnej wody, oraz w trybie niskiego zużycia energii. Rzeczywiste

zużycie energii zależy od sposobu użycia urządzenia.

3) Na podstawie 280 standardowych cykli zmywania. Rzeczywiste zużycie energii zależy od sposobu użycia urządzenia.

Karta produktu

ürün bilgilerine

Marka

INDESIT

Model

DFG 26B10

Standart yer yerleşimlerinde nominal kapasite (1)

A+++ (düşük tüketim)’’dan D (yüksek tüketim)’’e Enerji verimlilik sınıfı

A+

kWh cinsinden yıllık enerji tüketimi (2)

295

kWh cinsinden standart temizleme programının enerji tüketimi

1.04

W’’de off-modun güç tüketimi

0.5

W’’de left-on modun güç tüketimi

5.0

Litre olarak yıllık su tüketimi (3)

3080

A (yüksek verim)’’dan G (düşük verim)’’e kurutma verimlilik sınıfı

Dakika cinsinden standart temizleme programı için program süresi

190

Left-on modun dakika cinsinden süresi

Yıkamada dB(A) re 1 pW cinsinden gürültü

Ankastre Model

Hayır

Notlar

1) Etiket ve ş üzerinde yer alan bilgi, standart yıkama programı ile ilişkilidir, bu programın normal olarak kirlenmiş sofra takımlarını

yıkamak için uygundur ve kombine enerji ve su tüketimi açısından en etkili programlardır. Standart yıkama programı, Eco program’’dır.

2) Soğuk su kullanılan 280 adet standart yıkama programına ve ve düşük güç modlarının tüketimine dayanmaktadır. Gerçek enerji

tüketimi cihazın nasıl kullanıldığına göre değişecektir.

3) 280 adet standart yıkama programına dayanmaktadır. Gerçel su tüketimi, cihazın nasıl kullanıldığına bağlıdır.

Ürün bilgilerine

Assistance

Before contacting Assistance:

• Check whether the problem can be resolved using the

Troubleshooting guide

(see Troubleshooting).

• Restart the programme to check whether the problem has

ceased to exist.

• If the problem persists, contact the Authorised Technical

Assistance Service.

Never use the services of unauthorised technicians.

Please have the following information to hand:

• The type of malfunction.

• The appliance model (Mod.).

• The serial number (S/N).

This information can be found on the appliance data plate

(see

Description of the appliance)

Servis

Desteğe başvurmadan önce

• Problemin Sorun Giderme rehberi kullanılarak çözülüp

çözülmeyeceğini kontrol edin

(bkz. Sorun Giderme)

• Karşılaştığınız problemin devam edip etmediğini görmek

için programı baştan başlatın.

• Sorun devam ediyorsa, Yetkili Teknik Servis ile temas kurun.

Yetkisiz teknisyenlerin verdiği hizmetleri kullanmayın.

Lütfen aşağıda belirtilen bilgileri hazır edin:

• Arıza tipi.

• Cihaz Modeli (Mod).

• Seri Numarası (S/N).

Bu bilgiler, cihazın bilgi plakası üzerinde bulunur

(bkz. Cihazın

tanımı)

Cihazın ömrü 10 yıldır (Ürünün fonksiyonunu yerine

getirebilmesi için gerekli yedek parça bulundurma süresi)

Servis

444 50 10

Üretici Firma:

INDESIT COMPANY Spa

Viale Aristide Merloni, 47

60044 Fabriano Italy

Tel: +39 0732 6611

Ìthalatçı Firma:

INDESIT COMPANY BEYAZ EŞYA PAZARLAMA A.Ş.

Balmumcu Cad. Karahasan Sok.

No:11, 34349 - Balmumcu Beşiktaş - İstanbul

Tel: (0212) 355 53 00

Faks: (0212) 212 95 59

Satış Sonrası Hizmetler:

Indesit Company Beyaz Eşya Sanayi ve Ticaret A.Ş.

Balmumcu Cad. Karahasan Sok.

No: 11, 34349 – Balmumcu Beşiktaş – İstanbul

Tel: (0212) 355 53 00

Serwis Techniczny

Przed zwróceniem się do Serwisu Technicznego:

• Sprawdzić, czy problemu nie można rozwiązać samodzielnie

(patrz Nieprawidłowości w działaniu i sposoby ich

usuwania).

• Ponownie uruchomić program, aby przekonać się, czy

usterka nie ustąpiła.

• W przeciwnym wypadku skontaktować się z autoryzowanym

Serwisem Technicznym.

Zwracać się wyłącznie do autoryzowanych techników.

Podać:

• rodzaj nieprawidłowości;

• model urządzenia (Mod.);

• numer seryjny (S/N).

Informacje te znajdują się na tabliczce znamionowej

umieszczonej na urządzeniu

(patrz Opis urządzenia).

* Only available in selected models.

Installation

If the appliance must be moved at any time, keep it in an

upright position; if absolutely necessary, it may be tilted onto

its back.

Connecting the water supply

Adaptation of the water supply for installation should only

be performed by a qualified technician.

The water inlet and outlet hoses may be positioned towards

the right or the left in order to achieve the best possible

installation.

Make sure the dishwasher does not bend or squash the hoses.

Connecting the water inlet hose

• To a 3/4” gas cold or hot water connection point (max.

60°C).

• Run the water until it is perfectly clear.

• Screw the inlet hose tightly into position and turn off the

tap.

If the inlet hose is not long enough, contact a specialist

store or an authorised technician

(see Assistance)

The water pressure must be within the values indicated

in the Technical Data table - otherwise the dishwasher may

be function properly.

Make sure the hose is not bent or compressed.

Connecting the water outlet hose

Connect the outlet hose to a drain duct with a minimum

diameter of 2 cm. (A)

The outlet hose connection must be at a height ranging from

40 to 80 cm from the floor or surface where the dishwasher

rests.

Before connecting the water outlet hose to the sink drain,

remove the plastic plug (B).

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the water

supply in the event of anomalies or leaks from inside the

appliance.

Some models are also equipped with the supplementary

safety device New Acqua Stop*, which guarantees anti-

flooding protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstances should the water inlet hose be cut

as it contains live electrical parts.

Electrical connection

Before inserting the plug into the electrical socket, make

sure that:

• The socket is earthed and complies with current

regulations;

• the socket can withstand the maximum load of the

appliance as shown on the data plate located on the inside

of the door

(see chapter Description of the appliance);

• The power supply voltage falls within the values indicated

on the data plate on the inside of the door.

• The socket is compatible with the plug of the appliance. If

this is not the case, ask an authorised technician to replace

the plug (

see Assistance

). Do not use extension cables or

multiple sockets.

Once the appliance has been installed, the power supply

cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, have it replaced

by the manufacturer or its authorised Technical Assistance

Service in order to prevent all potential hazards.

(See

Assistance)

The Company shall not be held responsible for any

incidents, if these regulations are not observed.

Positioning and levelling

1. Position the dishwasher on a level sturdy floor. If the floor is

uneven, the front feet of the appliance may be adjusted until

it reaches a horizontal position. If the appliance is levelled

correctly, it will be more stable and much less likely to move

or cause vibrations and noise while it is operating.

2. Before recessing the dishwasher, stick the adhesive

transparent strip* under the wooden shelf in order to protect

it from any condensation which may form.

3. Place the dishwasher so that its sides or back panel are in

contact with the adjacent cabinets or the wall. This appliance

can also be recessed under a single worktop*

(see the

Assembly instruction sheet)

4*. To adjust the height of the rear foot, turn the red hexagonal

bushing on the lower central part at the front of the dishwasher

using a hexagonal spanner with an opening of 8 mm. Turn the

spanner in a clockwise direction to increase the height and

in an anticlockwise direction to decrease it.

(see Building-in

instruction sheet attached to the documentation)

MIN 40 cm

MAX 80 cm

* Only available in selected models.

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and

the retaining elastic elements from the upper rack

(if any).

Water softener settings

Before starting the first wash cycle, set the hardness lev-

el of the water from the mains supply.

(see chapter Rinse

aid and refined salt).

First load the softener tank with water, then introduce about

1 kg of salt. It is perfectly normal for water to flow out.

As soon as this procedure is complete, run a wash cycle.

Only use salt that has been specifically designed for dish-

washers.

After the salt has been poured into the machine, the LOW

SALT indicator light* switches off.

If the salt container is not filled, the water softener and the

heating element may be damaged as a result.

Technical data

Dimensions

width 60 cm

height 85 cm

depth 60 cm

Capacity 13 standard place-settings

Water supply pressure

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

7,25 – 145 psi

Power supply voltage See appliance data plate

Total absorbed power See appliance data plate

Fuse See appliance data plate

This dishwasher conforms to the

following European Community

Directives:

-2006/95/EC (Low Voltage)

-2004/108/EC (Electromagnetic

Compatibility)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/EU Waste Electrical

and Electronic Equipment

(WEEE)

The machine has a buzzer/set of tones

(depending on the

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc. *

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

light

(depending on the dishwasher model)

The display* provides useful information concerning the

type of wash cycle, drying/wash-cycle phase, remaining time,

temperature etc etc.

Overall view

Description of the

appliance

***Only in completely built-in models.

* Only available in selected models.

The number and type of wash cycles and options may vary depending on the dishwasher model.

1. Upper rack

2. Upper spray arm

3. Tip-up dispensers

4. Rack height adjuster

5. Lower rack

6. Lower spray arm

7. Washing filter

8. Salt dispenser

9. Detergent dispenser, rinse-aid dispenser and

Active Oxygen device*

10. Data plate

11. Control panel***

Control panel

Start/Pause button and

indicator light

ON/OFF/Reset button

Cycle select knob

Low Salt indicator light

Delayed Start option

button and indicator light

Low Rinse Aid

indicator light

Half Load option button and indicator light

Washing and Delayed Start 3h option indicator light.

Drying and Delayed Start 6h option indicator light.

Wash Cycle End and Delayed Start 9h option indicator light.

Refined Salt and Rinse Aid

Only use products which have been specifically designed

for dishwashers. Do not use table salt or industrial salt.

Follow the instructions given on the packaging.

If you are using a multi-function product, we recommend

that you add salt in any case, especially if the water is hard or

very hard.

(Follow the instructions given on the packaging.)

If you do not add salt or rinse aid, the LOW SALT* and

LOW RINSE AID* indicator lights will remain lit.

Measuring out the refined salt

The use of salt prevents the formation of LIMESCALE on the dishes

and on the machine’s functional components.

• It is important that the salt dispenser be never empty.

• It is important to set the water hardness.

The salt dispenser is located in the lower part of the dishwasher

(see Description)

and should be filled:

• When the LOW RINSE AID indicator light in the control panel

is lit *;

• When the green float* on the cap of the salt dispenser is no

longer visible.

• See autonomy in the water hardness table.

1. Remove the lower rack and unscrew the

container cap (anticlockwise).

2. Only the first time you do this: fill the water

dispenser up to the edge.

3. Position the funnel

(see figure)

and

fill the salt container right up to its edge

(approximately 1 kg); it is not unusual for a

little water to leak out.

4. Remove the funnel and wipe any salt residue away from the

opening; rinse the cap under running water and then screw it on.

It is advisable to perform this procedure every time you add salt

to the container.

Make sure the cap is screwed on tightly, so that no detergent can

get into the container during the wash cycle (this could damage

the water softener beyond repair).

Whenever you need to add salt, we recommend carrying out

the procedure before the washing cycle is started.

Setting the water hardness

For perfect water softener operation, it is essential that the

adjustment be based on the water hardness in your house. Ask

your local water supplier for this information. The factory setting

is for medium water hardness.

• Switch the dishwasher on using the On/Off button.

• Switch it off using the On/Off button

• Press and hold the START/PAUSE button for 5 seconds.

• Switch it on using the On/Off button

• The salt indicator light flashes (as many times as the current

selection.)

• Set the knob to the desired hardness level number

(see Table

on water hardness.)

• Switch it off using the On/Off button

• Setting is complete!

Even if using multi-functional tablets, the salt dispenser should

still be filled.

Measuring out the rinse aid

Rinse aid makes dish DRYING easier. The rinse aid dispenser

should be filled:

• When the LOW RINSE AID indicator light on the panel/display

is lit *;

• When the dark optical indicator* on the dispenser door “D”

becomes transparent.

1. Open the dispenser “D” by pressing and pulling up the tab

on the lid;

2. Carefully introduce the rinse aid as far as the maximum reference

notch of the filling space - avoid spilling it. If this happens, clean

the spill immediately with a dry cloth.

3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the appliance tub.

Rinse-aid dispenser setting

If you are not completely satisfied with the drying results, you can

adjust the quantity of rinse aid.

• Switch the dishwasher on using the On/Off button.

• Switch it off using the On/Off button

• Press the START/PAUSE button three times

• Switch it on using the On/Off button

• Everything is off

• Set the knob to the level number of rinse aid quantity to be

supplied.

• Switch it off using the On/Off button

• Setting is complete!

If the rinse aid level is set to ZERO (ECO), no rinse aid will be

supplied. The LOW RINSE AID indicator light will not be lit if you

run out of rinse aid.

A maximum of 4 levels can be set according to the dishwasher

model. The factory setting is for a medium level.

• If you see bluish streaks on the dishes, set a low number (1-2).

• If there are drops of water or limescale marks on the dishes,

set a high number (3-4).

Water Hardness Table

Average salt dispenser

capacity duration**

level °dH °fH mmol/l months

1 0 - 6 0 - 10 0 - 1 7 months

2 6 - 11 11 - 20 1,1 - 2 5 months

3 12 - 17 21 - 30 2,1 - 3 3 months

4 17 - 34 31 - 60 3,1 - 6 2 months

34 - 50 61 - 90 6,1 - 9 2/3 weeks

For values between 0°f and 10°f, we do not recommend the use of salt.

* a setting of 5 may increase cycle duration.

** 1 wash cycle per day.

(°dH = hardness measured in German degrees - °f = hardness

measured in French degrees – mmol/l = millimoles per litre)

* Only available in selected models.

Loading the racks

Tips

Before loading the racks, remove all food residues from the

crockery and empty liquids from glasses and containers. No

preventive rinsing is needed under running water.

Arrange the crockery so that it is held in place firmly and does

not tip over; and arrange the containers with the openings facing

downwards and the concave/convex parts placed obliquely,

thus allowing the water to reach every surface and flow freely.

Make sure that the lids, handles, trays and frying pans do not

prevent the spray arms from rotating. Place any small items in

the cutlery basket.

Since plastic dishes and non-stick frying pans usually retain more

water drops, their drying will be not so good as that of ceramic

or stainless-steel dishes.

Lightweight items such as plastic containers should be placed in

the upper rack and arranged so that they cannot move.

After loading the appliance, make sure that the spray arms can

rotate freely.

Lower rack

The lower rack can hold pans, lids, dishes, salad bowls, cutlery

etc. Large plates and lids should ideally be placed at the sides.

Very soiled dishes and pans should be placed in the lower rack

because in this sector the water sprays are stronger and allow

a higher washing performance.

Several dishwasher models are fitted with tip-up sectors*.

They can be used in a vertical position when arranging dishes

or in a horizontal position (lower) to load pans and salad bowls

easily.

Cutlery basket

The basket is equipped with top grilles for improved cutlery ar-

rangement. The cutlery basket should be positioned only at the

front of the lower rack

Upper rack

Load this rack with delicate and lightweight crockery such as

glasses, cups, saucers and shallow salad bowls.

Several dishwasher models are fitted with tip-up sectors*.

They can be used in a vertical position when arranging tea/

dessert saucers or in a lower position to load bowls and food

containers.

* Only available in selected models.

Adjusting the height of the upper rack

In order to make it easier to arrange the crockery, the upper rack

may be moved to a higher or lower position.

The height of the upper rack should be adjusted WHEN THE

RACK IS EMPTY.

NEVER raise or lower the rack on one side only.

If the rack is equipped with a Lift-Up device*

(see figure)

, lift

it up by holding its sides. To restore the lower position, press

the levers (A) at the sides of the rack and follow the rack down.

Unsuitable crockery

• Wooden crockery and cutlery.

• Delicate decorated glasses, artistic handicraft and antique

crockery. Their decorations are not resistant.

• Parts in synthetic material which do not withstand high

temperatures.

• Copper and tin crockery.

• Crockery soiled with ash, wax, lubricating grease or ink.

The colours of glass decorations and aluminium/silver pieces

can change and fade during the washing process. Some types

of glass (e.g. crystal objects) can become opaque after a number

of wash cycles too.

Damage to glass and crockery

Caused by:

• Type of glass and glass production process.

• Chemical composition of detergent.

• Water temperature of rinse cycle.

Tips:

• Only use glasses and porcelain guaranteed by the

manufacturer as dishwasher safe.

• Use a delicate detergent suitable for crockery.

• Collect glasses and cutlery from the dishwasher as soon as

the wash cycle is over.

The upper rack can be adjusted for height based on requirements:

high position to place bulky crockery in the lower rack and low

position to make the most of the tip-up compartments/sectors

by creating more space upwards.

Tip-up compartments with adjustable position*

The side tip-up compartments can be positioned at three different

heights to optimize the arrangement of crockery inside the rack.

Wine glasses can be placed safely

in the tip-up compartments by

inserting the stem of each glass

into the corresponding slots. For

optimum drying results incline the tip-

up compartments more. To change

the inclination, pull up the tip-up

compartment, slide it slightly and

position it as you wish.

Cutlery tray*

Some dishwasher models are fitted with a sliding tray which

can be used to hold serving utensils or small cups. For

optimum washing performance, avoid positioning bulky

crockery directly below the tray.

The cutlery tray can be removed

(see Figure).

*Only available in selected models with different numbers and

positions.

* Only available in selected models.

Starting the dishwasher

1. Switch on the appliance by pressing the ON/OFF button.

2. Open the door and pour in a suitable amount of detergent

(see

Measuring out the detergent).

3. Load the racks

(see Loading the racks)

and shut the door.

4. Select the wash cycle by turning the SELECT WASH CYCLE

knob: align the notch on the knob with the number or symbol

representing the desired wash cycle. The START/PAUSE indicator

light will go on.

5. Select the wash options*

(see Options and Special Wash

Cycles).

6. Start the cycle by pressing the START button; the indicator

light will stop flashing and stay lit (fixed light). The indicator light

corresponding to the wash phase will go on, signalling that the

wash cycle has begun.

7. At the end of the wash cycle the END indicator light will go

on (fixed light). Switch off the appliance by pressing the ON/

OFF button.

8. Wait a few minutes before removing the crockery to avoid

getting burnt. Unload the racks, beginning with the lower level.

The machine will switch off automatically during long

periods of inactivity in order to minimise electricity

consumption.

Changing a wash cycle in progress

If a mistake was made in the wash-cycle selection process, it is

possible to change the cycle provided that it has only just begun:

once the wash cycle has started, in order to change the wash

cycle switch off the machine by pressing and holding the ON/

OFF/Reset button. Switch it back on using the same button and

select the desired wash cycle and options.

Adding extra crockery

Press the Start/Pause button and open the door, taking care to

avoid the escaping steam, and place the crockery inside the

dishwasher. Press the Start/Pause button: The cycle will start

again after a long beep has been emitted.

If the delayed start has been set, at the end of the countdown

the wash cycle will not start. It will stay in Pause mode.

Press the Start/Pause button to pause the machine; the wash

cycle is stopped.

At this stage the wash cycle cannot be changed.

Accidental interruptions

If the door is opened during the wash cycle or there is a power

cut, the cycle stops. It starts again from the point at which it

was interrupted once the door has been shut or the electricity

supply restored.

Measuring out the detergent

Good washing results also depend on the correct amount of

detergent being used. Exceeding the stated amount does not

result in a more effective wash and increases environmental

pollution.

The amount can be adjusted to the soil level.

In the case of normally soiled items, use approximately either

35g (powder detergent) or 35ml (liquid detergent). If tablets

are used, one tablet will be enough.

If the crockery is only lightly soiled or if it has been rinsed

with water before being placed in the dishwasher, reduce the

amount of detergent used accordingly.

For good washing results also follow the instructions shown

on the detergent box.

For further questions please ask the detergent producers.

To open the detergent dispenser use the opening device “A”.

Introduce the detergent into the dry dispenser “B” only.

Place the amount of detergent for pre-washing directly inside

the tub.

1. When measuring out the detergent refer to the Table of wash

cycles to add the proper quantity. Compartment B comprises a

level showing the maximum quantity of liquid or powder detergent

that can be added to each cycle.

2. Remove detergent residues from the edges of the dispenser

and close the cover until it clicks.

3. Close the lid of the detergent dispenser by pulling it up until

the closing device is secured in place.

The detergent dispenser automatically opens up at the right time

according to the wash cycle.

If all-in-one detergents are used, we recommend using the TABS

option, because it adjusts the cycle so that the best washing and

drying results are always achieved.

Only use detergent which has been specifically designed

for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam residues

remaining in the machine after the cycle has ended.

To achieve the best washing and drying results, the combined

use of detergent, rinse aid liquid and refined salt is required.

We recommend using detergents that do not contain

phosphates or chlorine, as these products are harmful

to the environment.

Detergent and

dishwasher use

Wash cycles

The number and type of wash cycles and options may vary depending on the dishwasher model.

Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.

Based on the different conditions of use, the wash-cycle duration and data can change.

Wash Cycle Drying Options

Wash Cycle

Duration

h:min

Water

Consumption

(l/cycle)

Energy

Consumption

(kWh/cycle)

1. Eco Yes

Half Load - Delayed Start

03:10 11,0 1,04

2. Intensive Yes

Half Load - Delayed Start

02:30 16,5 1,70

3. Normal Yes

Half Load - Delayed Start

02:00 16,0 1,35

4. Delicates Yes

Half Load - Delayed Start

01:30 12,0 1,10

5. Rapid 40’ No

Delayed Start

00:40 9,0 0,95

6. Prewash No

Half Load - Delayed Start

00:10’ 4,0 0,01

Instructions on wash-cycle selection and detergent dosage

1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal

soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery.

27 gr/ml + 6 gr/ml** – 1 Tab

(**Quantity of pre-washing detergent)

2. Heavily soiled dishes and pans (not to be used for delicate items). 30 gr/ml – 1 Tab

3. Normally soiled pans and dishes. 27 gr/ml + 6 gr/ml** – 1 Tab

4. Economic and fast wash for delicate items which are sensitive to high temperatures. 30 gr/ml – 1 Tab

5. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab

6. Pre-wash while awaiting completion of the load with the dishes from the next meal. No detergent.

Standby consumption: Left-on mode consumption: 5,0 W - Off mode consumption: 0.5 W

Delayed start option

It is possible to delay the start time of the wash cycle

by 3, 6 or 9 hours:

1:After selecting the desired wash cycle and any other

options, press the DELAYED START button. the indicator

light will go on.

2: Select the desired delay time by pressing the Delayed

Start button repeatedly. The wash phase (3 hours), drying

phase (6 hours) and end (9 hours) indicator lights will go on

in succession.

If the Delayed Start button is pressed again, the option is

deselected and the indicator light goes off.

3. After the selection process, the countdown will begin if

the Start/Pause button is pressed. The selected delay-period

indicator light flashes and the Start/Pause button stops

flashing (fixed light).

3. Once this time has elapsed, the DELAYED START indicator

light goes off and the wash cycle begins.

The Delayed Start function cannot be set once a wash

cycle has started.

Wash options*

The OPTIONS may only be set, changed or reset after the

wash cycle has been selected and before the Start/Pause

button has been pressed.

Only the options which are compatible with the type of wash

cycle set may be selected. If an option is not compatible

with the selected wash cycle

(see Table of wash cycles)

, the

corresponding symbol/LED flashes rapidly 3 times.

If an option is selected which is not compatible with another

previously-selected option, it will flash 3 times and go off,

while the most recently selected option will remain active.

To deselect an option which has been set by mistake, press

the corresponding button again.

Notes:

Optimum performance levels when using the “"Rapid 40’” cycle

can be achieved by respecting the specified number of place

settings.

To reduce consumption even further, only run the dishwasher

when it is full.

Note for Test Laboratories: for information on comparative EN

testing conditions, please send an email to the following address:

[email protected]

Half load option

If there are not many dishes to be washed, a half

load cycle may be used in order to save water, electricity and

detergent. Select the wash cycle and press the HALF LOAD

button; the indicator light will go on.

Press the HALF LOAD button again to deselect this option.

Remember to halve the amount of detergent.

Special wash cycles

and Options

* Only available in selected models.

Care and maintenance

* Only available in selected models.

Shutting off the water and electricity

supplies

• Turn off the water tap after every wash cycle to avoid leaks.

• Always unplug the appliance when cleaning it and when

performing maintenance work.

Cleaning the dishwasher

• The external surfaces of the machine and the control panel

can be cleaned using a non-abrasive cloth which has been

dampened with water. Do not use solvents or abrasive

products.

• Any marks on the inside of the appliance may be removed

using a cloth dampened with water and a little vinegar.

Preventing unpleasant odours

• Always keep the door of the appliance ajar in order to avoid

moisture from forming and being trapped inside the machine.

• Clean the seals around the door and detergent dispensers

regularly using a damp sponge. This will avoid food becoming

trapped in the seals, which is the main cause behind the

formation of unpleasant odours.

Cleaning the spray arms

Food residue may become encrusted onto the spray arms

and block the holes used to spray the water. It is therefore

recommended that you check the arms from time to time and

clean them with a small non-metallic brush.

The two spray arms may both be removed.

To remove the upper spray arm,

turn the plastic locking ring in an

anti-clockwise direction. The upper

sprayer arm should be replaced so

that the side with the greater number

of holes is facing upwards.

The lower spray arm can be

removed by pressing on the side

tabs and pulling it upwards.

Cleaning the water inlet hose*

If the water hoses are new or have not been used for an extended

period of time, let the water run to make sure it is clear and free

of impurities before performing the necessary connections. If this

precaution is not taken, the water inlet could become blocked

and damage the dishwasher.

Clean the water inlet filter at the tap outlet regularly.

- Turn off the water tap.

- Unscrew the end of the water inlet hose, remove the filter and

clean it carefully under running water.

- Re-place the filter and screw the water hose back into position.

Cleaning the filters

The filter assembly consists of three filters which remove food

residues from the washing water and then recirculate the water.

They must be cleaned if you wish to achieve the best results in

every wash.

Clean the filters regularly.

The dishwasher must not be used without filters or if the filter

is loose.

• After several washes, check the filter assembly and if necessary

clean it thoroughly under running water, using a non-metallic

brush and following the instructions below:

1. Turn the cylindrical filter C in an anti-clockwise direction and

pull it out

(fig. 1).

2. Remove the cup filter B by exerting a slight pressure on the

side flaps

(fig. 2);

3. Slide out the stainless-steel plate filter A.

(fig. 3).

4. Inspect the trap and remove any food residues. NEVER

REMOVE the wash-cycle pump protection

(black detail) (fig.4).

After cleaning the filters, re-place the filter assembly and fix it

in position correctly; this is essential for maintaining the efficient

operation of the dishwasher.

Leaving the machine unused for extended

periods

• Disconnect the appliance from the electricity supply and shut

off the water tap.

• Leave the door of the appliance ajar.

• When you return, run a wash cycle when the dishwasher is

empty.

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance.

* Only available in selected models.

Problem: Possible causes / Solutions:

The dishwasher does not start

or cannot be controlled.

• The water supply tap is not turned on.

• Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately

one minute and reset the wash cycle.

• The appliance has not been plugged in properly or another electricity socket should be used.

• The dishwasher door has not been closed properly.

The door won’t close.

• Make sure that the racks were inserted all the way.

• The lock was released. Strongly push the door until a “clacking” noise is heard.

No water drain out of the

dishwasher.

• The wash cycle has not nished yet.

• The water drain hose is bent

(see Installation).

• The drain duct is clogged up.

• The lter is clogged up with food residues.

• Check the height of the drain hose.

The dishwasher makes

excessive noise.

• The dishes are rattling against each other or against the spray arms. Place the dishes

properly and make sure the spray arms can rotate freely.

• Too much foam: the detergent has not been measured out correctly or it is not suitable for use

in dishwashers.

(See Detergent and dishwasher use.)

Do not prewash the dishes by hand.

The dishes and glasses are

covered in a white lm or

limescale deposits.

• No rened salt.

• Water hardness adjustment is not suitable: increase the relevant values.

(See Rened Salt

and Rinse Aid.)

• The salt and rinse-aid dispenser cap has not been closed properly.

• The rinse aid has been used up or the dosage is too low.

The dishes and glasses are

streaked or have a bluish

tinge.

• The rinse aid dosage is too high.

The crockery has not been

dried properly.

• A wash cycle without a drying programme has been selected.

• The rinse aid has been used up.

(See Rened Salt and Rinse Aid.)

• The rinse aid dispenser setting is not suitable.

• The crockery is made from non-stick material or plastic; the presence of water drops is

normal.

The dishes are not clean. • The crockery has not been arranged properly.

• The spray arms cannot rotate freely, being hindered by the dishes.

• The wash cycle is too gentle

(see Wash Cycles).

• Too much foam: the detergent has not been measured out correctly or it is not suitable for use

in dishwashers.

(See Detergent and dishwasher use.)

• The lid on the rinse aid compartment has not been closed correctly.

• The lter is dirty or clogged up

(see Care and maintenance.)

• The rened salt level is low

(See Rened Salt and Rinse Aid.)

• Make sure that the height of the dishes is compatible with the rack adjustment.

• The holes in the sprayer arms are clogged up.

(See Care and maintenance.)

The dishwasher won’t load

any water.

It is blocked with ashing lights.

• There is no water in the mains supply or the tap is shut off.

• The water inlet hose is bent

(see Installation).

• The lters are clogged up: they need cleaning.

(See Care and maintenance.)

• The drain duct is clogged up: it needs cleaning.

• After checking and cleaning, switch the dishwasher on and off and start a new wash cycle.

• If the problem persists, turn off the water tap, remove the plug and call the Service Centre.

Instalacja

W przypadku przenoszenia należy trzymać urządzenie w

pozycji pionowej; w razie konieczności przechylić je do tyłu.

Połączenia hydrauliczne

Przystosowanie instalacji hydraulicznej powinno być

dokonywane wyłącznie przez wykwalikowany personel.

Wąż doprowadzający i odprowadzający wodę można skiero-

wać na prawo lub na lewo, aby umożliwić optymalną instalację.

Przewody rurowe nie mogą być zagięte ani przygniecione

przez zmywarkę.

Podłączenie węża doprowadzającego wodę

• Do zaworu wody z gwintem 3/4” GAS zimnej lub ciepłej

(max. 60°C).

• Odkręcić wodę i pozwolić płynąć aż stanie się przejrzysta.

• Przykręcić dobrze wąż doprowadzający wodę i odkręcić

kurek.

Jeśli wąż doprowadzający okaże się za krótki, zwrócić się

do specjalistycznego sklepu lub wykwalikowanego technika

(zob. Serwis)

Ciśnienie wody powinno mieścić się w zakresie wartości

podanych w tabeli danych technicznych, w przeciwnym

przypadku zmywarka może pracować nieprawidłowo.

Należy zwrócić uwagę, aby na przewodzie nie tworzyły

się zgięcia ani zwężenia.

Podłączenie węża odprowadzającego wodę

Podłączyć przewód odprowadzający do przewodu

kanalizacyjnego o średnicy minimum 2 cm. (A)

Złącze przewodu odprowadzającego musi znajdować się na

wysokości od 40 do 80 cm od podłogi lub podłoża, na którym

umieszczono zmywarkę.

Przed podłączeniem przewodu odprowadzającego wodę do

syfonu zlewozmywaka, należy usunąć plastikową zatyczkę

(B).

Zabezpieczenie przed zalaniem

Aby zagwarantować, że nie dojdzie do zalania, zmywarka:

- posiada system przerywający dopływ wody w przypadku

wystąpienia anomalii lub wydostawania się wody ze środka.

Niektóre modele są wyposażone także w dodatkowe

urządzenie zabezpieczające New Acqua Stop*, które

gwarantuje ochronę przed zalaniem również w przypadku

pęknięcia przewodu doprowadzającego wodę.

UWAGA: NIEBEZPIECZNE NAPIĘCIE!

Węża doprowadzającego wodę nie można w żadnym wypadku

przecinać, gdyż zawiera części pod napięciem.

Podłączenie do sieci elektrycznej

Przed włożeniem wtyczki do gniazdka należy się upewnić, czy:

• gniazdko ma uziemienie i jest zgodne z obowiązującymi

przepisami;

• gniazdko jest w stanie wytrzymać obciążenie maksymalnej

mocy urządzenia wskazane na tabliczce znamionowej

umieszczonej na drzwiach wewnętrznych

(zob. Opis zmywarki);

• napięcie zasilania zawiera się w przedziale wartości

podanych na tabliczce znamionowej umieszczonej na

drzwiach wewnętrznych;

• gniazdko jest kompatybilne z wtyczką urządzenia. W

przeciwnym wypadku zwrócić się do wykwalikowanego

technika o wymianę wtyczki

(zob. Serwis)

; nie używać

przedłużaczy ani rozgałęziaczy.

Po zainstalowaniu urządzenia przewód zasilana

elektrycznego oraz gniazdko elektryczne powinny być łatwo

dostępne.

Przewód nie powinien być powyginany ani przygnieciony.

Jeśli przewód zasilający jest uszkodzony, powinien zostać

wymieniony przez producenta lub jego serwis techniczny, aby

uniknąć wszelkiego ryzyka.

(zob. Serwis)

Producent nie ponosi żadnej odpowiedzialności w

przypadku nieprzestrzegania tych zasad.

Ustawienie i wypoziomowanie

1. Postawić zmywarkę na równym i twardym podłożu.

Skompensować nierówności odkręcając lub dokręcając

przednie nóżki, aż urządzenie znajdzie się w pozycji poziomej.

Dokładne wypoziomowanie zapewnia stabilność i zapobiega

drganiom i hałasom.

2. Po zamontowaniu zmywarki otworzyć drzwiczki i przykleić

przezroczysty pasek samoprzylepny* pod blatem drewnianym

w celu jego ochrony przed ewentualnymi skroplinami.

3. Ustawić zmywarkę, przysuwając jej boki lub tył do

sąsiadujących mebli lub do ściany. Urządzenie można również

wbudować pod blatem kuchennym*

(zob. Karta montażu)

4*. Aby wyregulować wysokość tylnej nóżki, należy przekręcić

sześciokątną tuleję w kolorze czerwonym, znajdującą się w

dolnej, przedniej, środkowej części zmywarki za pomocą

klucza sześciokątnego 8 mm, obracając ją w kierunku zgodnym

z ruchem wskazówek zegara, aby zwiększyć wysokość, a w

kierunku przeciwnym do ruchu wskazówek zegara, aby ją

zmniejszyć.

(patrz ulotka z instrukcjami dotyczącymi zabudowy

załączona do dokumentacji)

MIN 40 cm

MAX 80 cm

* Tylko w niektórych modelach.

Strona jest ładowana ...

Indesit DFG 26B10 NX EU instrukcja

Marka: Indesit

Model: DFG 26B10 NX EU

Kategoria: Zmywarki

Typ: instrukcja

ściągnij PDF

raport

w innych językach

Türkçe: Indesit DFG 26B10 NX EU Kullanici rehberi
English: Indesit DFG 26B10 NX EU User guide

Indesit DFG 26B10 NX EU instrukcja

Indesit DFG 26B10 NX EU instrukcja

w innych językach

Powiązane dokumenty

Inne dokumenty