Sony KV-21CL1K Instrukcja obsługi

Kategoria
Telewizory LCD
Typ
Instrukcja obsługi
4-097-194-11(1)
R
© 2003 Sony Corporation
Instruction Manual
Инструкции за експлоатация
Návod k obsluze
Kezelési útmutató
Instrukcja obsługi
Инструкции по эксплуатации
GB
BG
CZ
HU
PL
RU
SK
Návod na obsluhu
FD Trinitron
Colour Television
KV-21CL1K
01CoverKV21CL1K.fm Page 2 Wednesday, June 11, 2003 11:52 AM
GB
master page=right
3
KV-21CL1K_Grp U14
4-097-194-11(1)
Introduction
Thank you for choosing this Sony FD Trinitron Colour Television.
Before operating the TV, please read this manual thoroughly and retain it for future
reference.
Symbols used in the manual:
Important information
Information on a feature.
1,2...Sequence of instructions.
Shaded buttons on the remote control
show you the buttons you have to
press to follow the sequence of the
instructions.
Informs you of the result of
instructions.
Table of Contents
Introduction............................................................................................................................................. 3
Safety Information .... ..............................................................................................................................4
Overview
Overview of Remote Control Buttons .... .............................................................................................5
Overview of TV Buttons ........................................................................................................................ 6
Installation
Inserting Batteries into the Remote Control ....................................................................................... 6
Connecting an Outdoor Aerial and VCR ............................................................................................7
First Time Operation
Switching On the TV and Automatically Tuning .............................................................................. 8
Menu system
Introducing and Using the Menu System ......................................................................................... 10
Picture............................................................................................................................................... 10
Sound................................................................................................................................................ 11
Timer................................................................................................................................................. 12
Channel Set Up ............................................................................................................................... 13
Set Up ............................................................................................................................................... 15
Teletext................................................................................................................................................ 16
Additional Information
Connecting Optional Equipment ....................................................................................................... 17
Using Optional Equipment ................................................................................................................. 17
Specifications......................................................................................................................................... 18
Troubleshooting .................................................................................................................................... 19
Table of Contents
01GBKV21CL1K.fm Page 3 Wednesday, June 11, 2003 3:16 PM
master page=left
4
KV-21CL1K_Grp U14
4-097-194-11(1)
Safety Information
This set is to operate on a 220-
240V AC supply only. Take care
not to connect too many
appliances to the same power
socket as this could result in fire
or electric shock.
For environmental and safety
reasons, it is recommended that
the TV set is not left in standby
mode when not in use.
Disconnect from the mains.
Never push objects of any kind
into the set as this could result in
a fire or electric shock. Never
spill liquid of any kind on the
set. If any liquid or solid object
does fall through, do not operate
the TV. Have it checked immedi-
ately by qualified personnel.
Do not open the cabinet and the
rear cover of the TV. Refer to
qualified service personnel only.
For your own safety, do not
touch any part of the TV, power
lead or aerial lead during
lightning storms.
To prevent fire or shock hazard,
do not expose the TV to rain or
moisture.
Do not cover the ventilation
openings of the TV. For
ventilation, leave a space of at
least 10cm all around the set.
Never place the TV in hot, humid
or excessively dusty places. Do
not install the TV where it may be
exposed to mechanical
vibrations.
To prevent fire, keep
inflammable objects or naked
lights (e.g. candles) away from
the TV.
Clean the screen and cabinet with a
soft, lightly dampened cloth. Do
not use any type of abrasive pad,
alkaline cleaner, scouring powder
or solvent, such as alcohol or
benzine, or antistatic spray. As a
safety precaution, unplug the TV
before cleaning it.
Pull out the power lead by the
plug. Do not pull on the power
lead itself.
Take care not to place heavy
objects on the power lead as this
could result in damage.
We recommend you wind any
excess lead around the holders
provided on the rear of the TV.
Place the TV on a secure stable
stand. Do not allow children to
climb on to it. Do not place the
TV on its side or face up.
Unplug the power lead before
moving the TV. Avoid uneven
surfaces, quick steps or excessive
force. If the set has been dropped
or damaged, have it checked
immediately by qualified service
personnel.
Do not cover the ventilation
openings of the TV with items
such as curtains or newspapers,
etc.
Safety Information
01GBKV21CL1K.fm Page 4 Wednesday, June 11, 2003 3:16 PM
GB
master page=right
5
KV-21CL1K_Grp U14
4-097-194-11(1)
Overview of Remote Control Buttons
Besides TV functions, all coloured buttons as well as green symbols are also used for
Teletext operation. For more details, please refer to “Teletext” section of this instruction
manual (see page 16).
TV
1
2
3
4
6
7
8
9
0
5
MENU
PROG
A/B
Displaying on screen
information
Press to display all on-screen
indications. Press again to
cancel.
Muting the sound
Press to mute TV sound.
Press again to restore the
sound.
Selecting input source
Press repeatedly until the
desired input symbol of the
source appears on the TV
screen.
This button only works in
Teletext mode.
Function A/B associated to this
button does not work with this TV.
Selecting channels
Press to select channels.
For double-digit programme
numbers, enter the second
digit within 3 seconds.
or
Press -/-- and then the first
and second digit.
If you enter an incorrect first
digit, this should be corrected
by entering another digit (0-9)
and then selecting -/-- button
again to enter the programme
number of your choice.
On timer
Set TV to switch on
automatically.
Sleep timer
Set TV to switch off
automatically.
This button does not work
on this set.
Adjusting TV volume
Press to adjust the volume
of the TV.
This button only works in
Teletext mode.
Function
9
associated to this
button does not work with this TV.
Selecting picture mode
Press repeatedly to change
the picture mode.
To temporarily switch off TV
Press to temporarily switch off TV (the standby
indicator 1 on TV lights up). Press again to switch on
TV from standby mode.
To save energy we recommend
switching off completely
when TV is not in use.
After 15 minutes
without a signal and
without any button
being pressed, the TV
switches automatically
into standby mode.
Selecting TV mode
Press to switch off teletext or
video input.
Back to the channel last
watched
Press to watch the last
channel selected (watched for
at least 5 seconds).
Selecting channels
Press to select the next or
previous channel.
Displaying the menu
system
Press to display the menu on
the TV screen. Press again to
remove the menu display
from the TV screen.
Menu selection
Scroll Up
Scroll Down
Previous menu or selection
Next menu or selection
Confirm your selection
Selecting Teletext
Press to switch on teletext.
Selecting screen format
Press to view programmes in
16:9 mode. Press again to
return to 4:3 mode.
Overview
01GBKV21CL1K.fm Page 5 Wednesday, June 11, 2003 3:16 PM
master page=left
6
KV-21CL1K_Grp U14
4-097-194-11(1)
Overview of TV Buttons
Inserting Batteries into the Remote Control
Make sure you insert the supplied batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
Displaying
the menu
system
Selecting
Input
source
Volume
control
buttons
Programme Up or
Down buttons
(selects TV
channels)
Lift up the door
flap with
mark to reveal
the control
panel.
Standby
indicator
On/Off
switch
Video Input
jack
Audio Input
jacks
Headphone
jack
Overview-Installation
01GBKV21CL1K.fm Page 6 Wednesday, June 11, 2003 3:16 PM
GB
master page=right
7
KV-21CL1K_Grp U14
4-097-194-11(1)
Connecting an Outdoor Aerial and VCR
Connecting cables are not supplied.
For more details of VCR connection, please refer to the section “Connecting Optional
Equipment” of this instruction manual (see page 17).
OUT IN
or
VCR
Scart lead is optional.
Installation
01GBKV21CL1K.fm Page 7 Wednesday, June 11, 2003 3:16 PM
master page=left
8
KV-21CL1K_Grp U14
4-097-194-11(1)
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV
enabling you to: 1) choose the language of the menu screen, 2) choose the country in which
you wish to operate the TV, 3) search and store all available channels (TV Broadcast), 4)
change the order in which the channels (TV Broadcast) appear on the screen and 5) adjust
the picture slant.
However, if you need to change any of these settings at a later date, you can do that by
selecting the appropriate option in the (Set Up) or (Channel Set Up) menu.
1 Connect the TV plug to the mains socket (220-240 V AC, 50 Hz).
Press ! On/Off button on the TV set to switch on the TV. The
first time you switch on the TV, a Language menu displays
automatically on the TV screen.
2 Press 2 +/– button on the top control panel to select the language,
then press t to confirm your selection. From now on all menus
will appear in the selected language.
3 The Country menu appears automatically on the TV screen. Press
2 +/– button to select the country in which you will operate the
TV set, then press t to confirm your selection.
• If the country in which you want to use the TV set does not
appear in the list, select “-” instead of a country.
In order to avoid wrong teletext characters for Cyrillic
languages we recommend to select Russia in the case that
your own country does not appear in the list.
4 Ensure the aerial is connected as instructed, then press t to
confirm. The TV automatically starts searching and storing all
available broadcast channels for you.
This procedure could take some minutes. Please be patient
and do not press any buttons, otherwise automatic tuning
will not be completed.
If no channels were found during the auto tuning process, a
new menu appears automatically on the screen asking you
to connect the aerial. Please connect the aerial (see page 7)
and press t. The auto tuning process will start again.
Language
Svenska
English
Nederlands
Français
Select language
Norsk
Confirm
[
t
]
Select
[
2+
]
Country
Schweiz/Suisse/Svizzera
Italia
Select Country
Norge
Sverige
Confirm
[
t
]
Select
[
2+
]
Do you want to start automatic
First please connect aerial
tuning?
No
Initial Set Up
Yes
Confirm
[
t
]
Select
[
2+
]
End
Auto Tuning
No channel found
Please connect aerial
OK
Confirm
[
t
]
End
First Time Operation
01GBKV21CL1K.fm Page 8 Wednesday, June 11, 2003 3:16 PM
GB
master page=right
9
KV-21CL1K_Grp U14
4-097-194-11(1)
5 After all available channels are captured and stored, the
Programme Sorting menu appears automatically on the screen
enabling you to change the order in which the channels appear on
the screen.
a) If you wish to keep the broadcast channels in the tuned order,
press MENU.
b) If you wish to store the channels in a different order:
1 Press 2 +/– to select the programme number with the
channel (TV Broadcast) you wish to rearrange, then press
t.
2 Press 2 +/– to select the new programme number position
for your selected channel (TV Broadcast), then press t.
3 Repeat steps b) 1 and b) 2 if you wish to change the order of
the other channels.
6 Because of the earth’s magnetism, the picture might slant. The
Picture Rotation menu allows you to correct the picture slants if it
is necessary.
a) If it is not necessary, press t.
b) If it is necessary, press 2 +/– to correct any slant of the picture
between –10 and +10. Finally press t to store.
•To allow this menu to appear again, press and hold MENU button at top control panel for
about 5 seconds.
The MENU, and / / / buttons on the remote control can also be used for the
operations above.
Your TV is now ready for use.
Programme Sorting
Programme:
TVE
TVE2
TV3
Select channel
04 C33
01
02
03
Confirm
[
t
]
Select
[
2+
]
Exit
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
Select new position
04 C33 03 TV3
Confirm
[
t
]
Select
[
2+
]
Exit
Picture Rotation
Confirm
[
t
]
End
Select
[
2+
]
[
2+
]
[
2
]
First Time Operation
01GBKV21CL1K.fm Page 9 Wednesday, June 11, 2003 3:16 PM
master page=left
10
KV-21CL1K_Grp U14
4-097-194-11(1)
Introducing and Using the Menu System
Your TV uses an on-screen menu system to guide you through the operations. Use the
following buttons on the Remote Control to operate the menu system:
1 Press MENU to switch the menu on.
2 • To highlight the desired menu or option, press or .
• To enter to the selected menu or option, press .
• To return to the last menu or option, press
.
• To alter settings of your selected option, press / / or .
• To confirm and store your selection, press .
3 Press MENU to remove the menu from the screen.
Picture
The “Picture” menu allows you to
alter the picture adjustments.
To do this:
After selecting the item you want to
alter, press , then press / /
or repeatedly to adjust it and
finally press to store the new
adjustment.
This menu also allows you to
customize the picture mode based
on the programme you are
watching:
Mode Live (for enhanced picture contrast and sharpness).
Movie (for a finely detailed picture).
Game (for a picture from game).
Personal (for your own custom settings).
Picture
Adjustment
Contrast Press or to reduce picture contrast.
Press or to enhance picture contrast.
Brightness Press or to darken the picture.
Press or to brighten the picture.
Colour Press or to decrease colour intensity.
Press or to increase colour intensity.
Picture
Intelligent Picture:
On
Picture Adjustment
Mode: Live
Confirm
Select
End
Picture
Intelligent Picture:
On
Picture Adjustment
Mode: Live
Confirm
Select
End
Menu System
01GBKV21CL1K.fm Page 10 Wednesday, June 11, 2003 3:16 PM
GB
master page=right
11
KV-21CL1K_Grp U14
4-097-194-11(1)
Once any changes are made to “Picture Adjustment”, “Mode” will switch automatically
to “Personal” and the new setting will be stored as “Personal”.
Sound
Hue Press or to decrease the green tones.
Press or to increase the green tones.
Hue can only be adjusted for NTSC colour signal (e.g. USA video tapes).
Sharpness Press or to soften the picture.
Press or to sharpen the picture.
Reset Select to reset the picture to the factory preset levels.
Intelligent
Picture
On/Off Select to optimize the picture quality.
The “Sound” menu allows you to
alter the sound adjustments.
Auto
Volume
On/Off
Volume level of the channels will stay the same, independent of the broadcast
signal (e.g. in the case of advertisements).
Select
Confirm
End
Sound
Auto Volume: Off
Select
Confirm
End
Sound
Auto Volume: Off
Menu System
01GBKV21CL1K.fm Page 11 Wednesday, June 11, 2003 3:16 PM
master page=left
12
KV-21CL1K_Grp U14
4-097-194-11(1)
Timer
The “Timer” menu allows you to alter
the timer adjustments.
Sleep Timer The “Sleep Timer” option in the “Timer” menu allows you to select
a time period for the TV to switch itself automatically into the
standby mode.
To do this:
After selecting the option, press , then press or to set the
time period delay (max. of 1 hour 30 minutes) and finally press
to store.
While watching the TV, you can press the button on
the remote control to display the time remaining.
One minute before the TV switches itself into standby
mode, “TV will turn off soon” is displayed on the TV
screen automatically.
On Timer The “On Timer” option in the “Timer” menu allows you to select a
time period for the TV to switch itself automatically on from
standby mode.
To do this:
After selecting the option, press , then press or to set the
time period delay (max. of 12 hours) and finally press to store.
Finally press the standby button &/1 on the remote control. After
the selected length of time, the TV switches on automatically and
“On Timer” will appear on the screen.
The standby indicator 1 on the TV set lights up in amber
to indicate that “On Timer” is active.
Any loss of power will cause these settings to be cleared.
If no buttons are pressed for more than one hour after the
TV is turned on using the “On Timer”, the TV
automatically goes into standby mode.
Timer
On Timer:
Sleep Timer: Off
Off
Select
Confirm
End
Timer
On Timer:
Sleep Timer: Off
Off
Select
Confirm
End
Menu System
01GBKV21CL1K.fm Page 12 Wednesday, June 11, 2003 3:16 PM
GB
master page=right
13
KV-21CL1K_Grp U14
4-097-194-11(1)
Channel Set Up
The “Channel Set Up” menu allows
you to preset channels on this TV.
Auto Tuning The “Auto Tuning” option in the “Channel Set Up” menu allows
you to automatically search and store all available TV channels.
To do this:
After selecting the option, press and then proceed in the same
way as in the step 4 of the section “Switching On the TV and
Automatically Tuning” (see page 8).
Programme
Sorting
The “Programme Sorting” option in the “Channel Set Up” menu
allows you to change the order in which the channels (TV
Broadcast) appear on the screen.
To do this:
After selecting the option, press and then proceed in the same
way as in step 5b) of the section “Switching On the TV and
Automatically Tuning” (see page 9).
Programme Labels The “Programme Labels” option in the “Channel Set Up” menu
allows you to name a channel using up to five characters (letters or
numbers).
To do this:
1 After selecting the option, press . Press or to select the
programme number with the channel you wish to name, then
press .
2 Press . With the first element of the label column highlighted,
press or to select a letter or number (select “_” for a
blank), then press to confirm this character. Select the other
four characters in the same way. Finally press to store.
Select
End
Channel Set Up
Programme Labels
Manual Programme Preset
Programme Sorting
Auto Tuning
Confirm
Select
End
Channel Set Up
Programme Labels
Manual Programme Preset
Programme Sorting
Auto Tuning
Confirm
Menu System
continued...
01GBKV21CL1K.fm Page 13 Wednesday, June 11, 2003 3:16 PM
master page=left
14
KV-21CL1K_Grp U14
4-097-194-11(1)
Manual
Programme
Preset
The “Manual Programme Preset” option in the “Channel Set Up”
menu allows you to:
a) Preset channels or a video input source one by one to the
programme order of your choice.
To do this:
1 After selecting the “Manual Programme Preset” option, press
. Highlight the Programme option and press . Press or
to select a programme number on which you want to preset
the channel (for VCR, select programme number “0”), then
press
.
The following option is only available depending on the
country you have selected in the “Language/Country”
menu.
2 After selecting the System option, press . Press or to
select the TV Broadcast system (B/G for western European
countries or D/K for eastern European countries), then press
.
3 After selecting the Channel option, press . Then press or
to select the channel tuning (C for terrestrial channels or S
for cable channels). Next press . After that, press the number
buttons to directly enter the channel number of the TV
Broadcast. If you do not know the channel number, press or
to search for it. When you tune the desired channel, press
twice to store.
Repeat all the above steps to tune and store more channels.
b) Normally the automatic fine tuning (AFT) will give the best
possible picture, however you can manually fine tune the TV to
obtain a better picture if the picture is distorted.
To do this:
While watching the channel (TV Broadcast) you wish to fine
tune, select the AFT option and press . Next press or to
adjust the fine tuning between -15 and +15. Finally press
twice to store.
c) Skip any unwanted programme numbers when they are selected
with the PROG +/– button.
To do this:
Highlighting the Programme option, press PROG +/– to select
the programme number you want to skip. When the
programme you want to skip appears on the screen, select the
Skip option and press . Next press or to select Yes.
Finally press twice to confirm and store.
To cancel this function afterwards, select No instead of Yes in the step
above.
Menu System
01GBKV21CL1K.fm Page 14 Wednesday, June 11, 2003 3:16 PM
GB
master page=right
15
KV-21CL1K_Grp U14
4-097-194-11(1)
Set Up
The “Set Up” menu allows you to
alter various options on this TV.
Language/
Country
The “Language/Country” option in the “Set Up” menu allows you to
select the language that the menus are displayed in.
To do this:
After selecting the option, press and then proceed in the same way
as in the step 2 and 3 of the section “Switching On the TV and
Automatically Tuning” (see page 8).
Picture Rotation Because of the earth’s magnetism, the picture might slant. In this case,
you can correct the picture slant by using the option “Picture
Rotation” in the “Set Up” menu.
To do this:
After selecting the option, press . Press or to correct any slant
of the picture between -10 and +10 and finally press to store.
RGB Centring When connecting an RGB source, such as a “PlayStation”, you may
need to readjust the horizontal position of the picture. In that case, you
can readjust it through the “RGB Centring” option in the “Set Up”
menu.
To do this:
While watching an RGB source, select the “RGB Centring” option and
press . Press or to adjust the centre of the picture between -10
and +10. Finally press to confirm and store.
Select
End
Set Up
RGB Centring: 0
Picture Rotation
Language/Country
Confirm
Select
End
Set Up
RGB Centring: 0
Picture Rotation
Language/Country
Confirm
Menu System
01GBKV21CL1K.fm Page 15 Wednesday, June 11, 2003 3:16 PM
master page=left
16
KV-21CL1K_Grp U14
4-097-194-11(1)
Teletext
Teletext is an information service transmitted by most TV stations. The index page of the
Teletext service (usually page 100) gives you information on how to use the service. To
operate Teletext, use the remote control buttons as indicated below.
Be sure to use a channel (TV Broadcast) with a strong signal, otherwise Teletext errors may
occur.
To switch on Teletext:
After selecting the TV channel which carries the Teletext service you wish to
view, press .
To select a Teletext page:
Input 3 digits for the page number, using the numbered buttons.
• If you have made a mistake, retype the correct page number.
• If the counter on the screen continues searching, it is because this page is not available. In that case,
input another page number.
To check the contents of a Teletext service:
Press .
To access the next or preceding page:
Press or .
To superimpose teletext on to the TV:
Whilst you are viewing Teletext, press . Press it again to cancel Teletext mode.
To freeze a teletext page:
Some Teletext pages have sub-pages which follow on automatically. To stop them, press
. Press it again to cancel the freeze.
To reveal concealed information (e.g., answer to a quiz):
Press . Press it again to conceal the information.
To enlarge the Teletext display:
Press . Each time you press , the Teletext display changes as follows: Enlarge upper
half t Enlarge lower half t Normal size.
To stand by for a Teletext page while watching a TV program.
1 Enter the Teletext number that you want to refer to, then press .
2 When the page number is displayed, press to show the Text.
To switch off Teletext:
Press .
Fastext
Fastext service lets you access pages with one push of a button.
While you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at
the bottom of the teletext page. Press the colour button (red, green, yellow or blue) to access
the corresponding page.
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
Teletext
01GBKV21CL1K.fm Page 16 Wednesday, June 11, 2003 3:16 PM
GB
master page=right
17
KV-21CL1K_Grp U14
4-097-194-11(1)
Connecting Optional Equipment
Using the following instructions, you can connect a wide range of optional equipment to
your TV set (connecting cables are not supplied).
Connecting a VCR:
To connect a VCR, please refer to the section “Connecting an outdoor aerial and VCR” of this
instruction manual. We recommend you connect your VCR using a Scart lead. If you do not
have a Scart lead, tune in the VCR test signal to the TV programme number “0” by using the
“Manual Programme Preset” option (for details on how to manually programme these presets,
see page 14, step a).
Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
Using Optional Equipment
1 Connect your equipment to the designated TV socket, as indicated above.
2 Switch on the connected equipment.
3 To watch the picture of the connected equipment, press repeatedly until the correct
input symbol appears on the screen.
4 Press button on the remote control to return to the normal TV picture.
Symbol Input Signals
1
Audio / video input signal through the Scart connector C
1
RGB input signal through the Scart connector C. This symbol appears
only if a RGB source has been connected.
2
Video input signal through the phono socket A and Audio input signal
through B.
A
B
1
2
C
8mm/Hi8/
DVC
camcorder
DVD/VCR
“PlayStation”*
decoder
When you connect the
headphones, the TV
speakers will
automatically be muted
* “PlayStation”
is a product
of Sony Computer
Entertainment, Inc.
* “PlayStation
” is a trademark
of Sony Computer
Entertainment, Inc.
Additional Information
01GBKV21CL1K.fm Page 17 Wednesday, June 11, 2003 3:16 PM
master page=left
18
KV-21CL1K_Grp U14
4-097-194-11(1)
Specifications
TV system:
Depending on your country selection:
B/G/H, D/K
Colour system:
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Channel Coverage:
VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12, R21-R69
Picture Tube:
Flat Display FD Trinitron
Rear Terminals
i1/ 21-pin Scart connector
(CENELEC standard) including
audio/video input, RGB input,
TV audio/video output.
Front Terminals
t2 video input – phono jack
2 audio input – phono jacks
headphones jack
Sound Output:
2 x 6 W (music power)
2 x 3 W (RMS)
Power Consumption:
66 W
Standby Power Consumption:
< 1 W
Dimensions (w x h x d):
Approx. 630 x 460 x 492 mm
Weight:
Approx. 25 kg
Accessories supplied:
1 Remote Control (RM-W100)
2 Batteries (IEC designated)
Other features:
Teletext, Fastext, TOPtext
Sleep Timer
•On Timer
Design and specifications are subject to change without notice.
Ecological Paper- Totally Chlorine Free
Additional Information
01GBKV21CL1K.fm Page 18 Wednesday, June 11, 2003 3:16 PM
GB
master page=right
19
KV-21CL1K_Grp U14
4-097-194-11(1)
Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
In case of problems, have your TV serviced by qualified personnel. Never open the casing
yourself.
Problem Solution
No picture (screen is dark) and no
sound.
Check the aerial connection.
Plug the TV in and press the ! button on the front of
TV.
If the standby indicator 1 is on, press &/1 button on
the remote control.
Poor or no picture (screen is dark),
but good sound.
Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to the
factory settings (see page 10).
No picture or no menu information
from equipment connected to the
Scart connector.
Check that the optional equipment is on and press
repeatedly on the remote control until the correct
input symbol is displayed on the screen (see page 17).
Good picture, no sound. Press the + button on the remote control.
Check that headphones are not connected.
No colour on colour programmes. Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to
factory settings (see page 10).
Distorted picture when changing
programmes or selecting teletext.
Turn off any equipment connected to the Scart
connector on the rear of the TV.
Wrong characters appear when
viewing teletext.
Using the menu system, enter the “Language/
Country” option in the “Set Up” menu and select the
country in which you operate the TV set. For Cyrillic
languages, we recommend to select Russia in the case
that your own country does not appear in the list (see
page 15).
Picture slanted. Using the menu system, select the “Picture Rotation”
option in the “Set Up” menu to correct the picture
slant (see page 15).
Noisy picture when viewing a TV
channel.
Using the menu system, select the “Manual
Programme Preset” menu and adjust Fine Tuning
(AFT) to obtain better picture reception (see page 14).
Using the menu system, select the “Intelligent
Picture” option in the “Picture” menu and select
“On” to reduce the noise in the picture (see page 10).
Remote control does not function. Replace the batteries.
The standby indicator 1 on the TV
flashes red.
Contact your nearest Sony service centre.
Additional Information
01GBKV21CL1K.fm Page 19 Wednesday, June 11, 2003 3:16 PM
1 / 1

Sony KV-21CL1K Instrukcja obsługi

Kategoria
Telewizory LCD
Typ
Instrukcja obsługi

w innych językach