Philips AC4558/50 Instrukcja obsługi

Typ
Instrukcja obsługi
1 2
A
H
B
C D E
G
F
© 2020 Koninklijke Philips N.V.
All rights reserved.
4241 211 04822
AC4558
EN User manual 1
BG Ръководство за потребителя 21
CS Příručka pro uživatele 44
HU Felhasználói kézikönyv 65
KK Қолданушының нұсқасы 88
PL Instrukcja obsługi 107
RO Manual de utilizare 130
RU Руководство пользователя 152
SK Príručka užívateľa 176
UK Посібник користувача 197
23
3
11
7
15
2119
5
13
9
17
6
14
10
18
24
4
12
8
16
2220
25
27 28 29
26
23
English
1EN
Contents
1 Important 2
Safety 2
2 Your air purier 5
Product Overview (g. a) 5
Controls overview (g. b) 5
3 Getting started 6
Installing lters 6
Wi-Fi connection 6
4 Using the appliance 8
Understanding the air
quality light 8
Turning on and o 9
Changing the Auto mode
setting 9
Changing the fan speed 10
Using the light on/o function 11
Setting the child lock 11
5 Cleaning 12
Cleaning schedule 12
Cleaning the body of the
appliance 12
Cleaning the air quality sensor 12
Cleaning the pre-lter 13
6 Replacing the air
purication lters 14
Understanding the healthy
air protect lock 14
Replacing the lters 14
7 Storage 15
8 Troubleshooting 16
9 Guarantee and service 19
Order parts or accessories 19
10 Notices 19
Electromagnetic elds (EMF) 19
Recycling 20
Notice 20
Simplied EU declaration of
conformity 20
2 EN
1 Important
Safety
Read this user manual carefully
before you use the appliance, and
save it for future reference.
Danger
Do not let water or any
other liquid or ammable
detergent enter the
appliance to avoid electric
shock and/or a re hazard.
Do not clean the
appliance with water,
any other liquid, or a
(ammable) detergent to
avoid electric shock and/
or a re hazard.
Do not spray any
ammable materials
such as insecticides or
fragrance around the
appliance.
Warning
Check if the voltage
indicated on the
appliance corresponds to
the local power voltage
before you connect the
appliance.
If the power cord is
damaged, you must have
it replaced by Philips, a
service center authorized
by Philips, or similarly
qualied persons in order
to avoid a hazard.
Do not use the appliance
if the plug, the power cord,
or the appliance itself is
damaged.
This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical, sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Child
shall not play with the
appliance. Cleaning and
maintenance shall not be
made by children without
supervision.
Do not block the air inlet
and outlet, e.g. by placing
items on the air outlet or
in front of the air inlet.
Make sure that foreign
objects do not fall into the
appliance through the air
outlet.
English
3EN
Standard WiFi interface
based on 802.11b/g/n at
2.4 GHz with a maximum
output power of 31.62 mW
EIRP.
Caution
This appliance is not
a substitute for proper
ventilation, regular
vacuum cleaning, or use
of an extractor hood or
fan while cooking.
If the power socket used
to power the appliance
has poor connections,
the plug of the appliance
becomes hot. Make
sure that you plug the
appliance into a properly
connected power socket.
Always place and use the
appliance on a dry, stable,
level, and horizontal
surface.
Leave at least 20cm free
space behind and on both
sides of the appliance
and leave at least 30cm
free space above the
appliance.
Do not place anything on
top of the appliance.
Do not sit or stand on
the appliance. Sitting or
standing on the appliance
may lead to potential
injuiry.
Do not place the
appliance directly below
an air conditioner to
prevent condensation
from dripping onto the
appliance.
Make sure all lters
are properly installed
before you switch on the
appliance.
Only use the original
Philips lters specially
intended for this
appliance. Do not use any
other lters.
Combustion of the lter
may cause inreversible
human hazard and/or
jeopardize other lives. Do
not use the lter as fuel or
for similar purpose.
Avoid knocking against
the appliance (the air inlet
and outlet in particular)
with hard objects.
Always lift or move the
appliance by the handle
on back side of the
appliance.
4 EN
such as TVs, radios, and
radio-controlled clocks.
The appliance is only
intended for household
use under normal
operating conditions.
Do not use the appliance
in wet surroundings or in
surroundings with high
ambient temperatures,
such as the bathroom,
toilet, or kitchen.
The appliance does
not remove carbon
monoxide (CO) or radon
(Rn). It cannot be used
as a safety device in
case of accidents with
combustion processes
and hazardous chemicals.
If you need to move the
appliance, disconnect the
appliance from the power
supply rst.
Do not move the
appliance by pulling its
power cord.
Always cleanse your
hands after changing the
lters.
Do not insert your ngers
or objects into the air
outlet or the air inlet to
prevent physical injury
or malfunctioning of the
appliance.
Do not use this appliance
when you have used
indoor smoke-type insect
repellents or in places
with oily residues, burning
incense, or chemical
fumes.
Do not use the appliance
near gas appliances,
heating devices or
replaces.
Always unplug the
appliance after use
and before cleaning,
or carrying out other
maintenance or replacing
the lters.
Do not use the appliance
in a room with major
temperature changes,
as this may cause
condensation inside the
appliance.
To prevent interference,
place the appliance at
least 2 meters away from
electrical appliances that
use airborne radio waves
English
5EN
Controls overview
(g. b)
Control buttons
Power on/o button
Light on/o button
Auto mode button
Fan speed button
Reset button
Display panel:
Wi-Fi indicator
Gas display
PM2.5 display
Indoor Allergen Index
Filter replacement alert
Sleep mode
Pre-lter cleaning alert
Child lock indicator**
2 Your air purifier
Congratulations on your purchase,
and welcome to Philips!
To fully benet from the support
that Philips oers, register your
product at www.philips.com/
welcome.
This appliance works with an air
ltration system. Read this user
manual carefully before you use
the appliance, and save it for future
reference.
Product Overview
(g. a)
A Display panel
B Air quality light
C
NanoProtect lter Series 3*
(FY3433)
D
NanoProtect lter Active
Carbon* (FY3432)
E Pre-lter
F Front cover
G Air quality sensor
H Control buttons
*Hereinafter referred to as "air
purication lter".
**You can enable the child lock
function through the Clean Home+
App.
6 EN
7 To reattach the front cover,
mount the cover onto the
bottom of the appliance rst (1).
Then, gently push the top of the
cover against the body of the
appliance (2) (g. i).
Wi-Fi connection
Setting up the Wi-Fi connection
for the rst time
1 Download and install the Philips
"Clean Home+" app from the
App Store or Google Play.
2 Put the plug of the air purier in
the power socket and touch
to turn on the air purier.
» The Wi-Fi indicator blinks
orange for the rst time.
3 Make sure that your smartphone
or tablet is successfully
connected to your Wi-Fi network.
4 Launch the "Clean Home+" app
and click on "Connect a New
Device" or press the "+" button
on the top of the screen. Follow
the onscreen instructions to
connect the air purier to your
network.
5 After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or
the help section in the "Clean
Home+" App for extensive and
up-to-date troubleshooting tips.
3 Getting started
Installing lters
Remove all packaging of the lters
before using the appliance. Unpack
them and place them into the
appliance described as follows:
Note
Make sure that you place the
air purication lter in the
appliance rst and then the pre-
lter.
Make sure that the side with
the tag is pointing towards you
when installing the lter.
1 Pull the top part of the front
cover to remove it from the
appliance (g. c).
2 Press the two clips down and
pull the pre-lter towards you
(g. d).
3 Remove all lters (g. e).
4 Remove all packaging materials
of the air purication lter
(g. f).
5 Put the unpacked air
purication lter into the
appliance (g. g).
6 Put the pre-lter back into the
appliance (g. h).
Note
Make sure that all hooks of the
pre-lte is properly attached to
the purier.
English
7EN
Note
This instruction is only valid
when the air purier is being
set up for the rst time. If the
network has changed or the
setup needs to be performed
again, consult section "Reset
the Wi-Fi connection" on
page 7.
If you want to connect more
than one air purier to your
smartphone or tablet, you have
to do this one by one. Complete
the set up of one air purier
before you turn on the other air
purier.
Make sure that the distance
between your smartphone
or tablet and the air purier
is less than 10 m without any
obstructions.
This App supports the
latest versions of Android
and iOS. Please check
www.philips.com/cleanhome for
the latest update of supported
operating systems and devices.
Reset the Wi-Fi connection
Note
This applies when the default
network to which your purier is
connected has changed.
Reset the Wi-Fi connection
when your default network has
changed.
1 Put the plug of the air purier in
the power socket and touch
to turn on the air purier.
2 Touch and simultaneously
for 3 seconds until you hear a
beep.
» The air purier goes to
pairing mode.
» The Wi-Fi indicator blinks
orange.
3 Follow the steps 4-5 in "Setting
up the Wi-Fi connection for the
rst time" section.
8 EN
4 Using the
appliance
Understanding the air
quality light
Air quality light
color
Air quality level
Blue Good
Blue-purple Fair
Purple-red Poor
Red Very poor
The air quality light automatically
goes on when the air purier is
switched on, and lights up all colors
in sequence. After approximately
30 seconds, the air quality sensors
select the color that corresponds
to the surrounding air quality of
airborne particles.
The color of the air quality light is
determined by the highest level
among PM2.5, Gas and IAI readings.
PM2.5
AeraSense sensing technology
accurately detects and quickly
responds to even the slightest
particle change in the air. It provides
you with reassurance with real-time
PM2.5 feedback.
Most of the indoor air pollutants
fall under PM2.5 – which refers to
airborne particle pollutants smaller
than 2.5 micrometers. Common
indoor sources of ne particles are
tobacco smoke, cooking, burning
candles. Some airborne bacteria
and the smallest mold spores, pet
allergen and dust mite allergen
particles also fall under PM2.5.
PM2.5 level Air quality light
color
12 Blue
13-35 Blue-purple
36-55 Purple-red
>55 Red
GAS
With an advanced gas sensor, a
display ranging from L1 to L4 shows
the level change of potential harmful
gases (incl. VOC, odor, etc.) detected.
L1 indicates best air quality.
Gas level Air quality light
color
L1 Blue
L2 Blue-purple
L3 Purple-red
L4 Red
English
9EN
IAI
The professional-grade AeraSense
sensor detects the level of indoor
air allergen and with numerical
feedback from 1 to 12 the potential
risk level of indoor air allergens can
be displayed. 1 indicates best air
quality.
IAI level Air quality light
color
1-3 Blue
4-6 Blue-purple
7-9 Purple-red
10-12 Red
Turning on and o
Note
Always place the air purier on
a stable, horizontal, and level
surface with the front of the
unit facing away from walls or
furniture.
For optimum purication
performance, close doors and
windows.
Keep curtains away from the air
inlet or air outlet.
Do not block the inlet or air
outlet with clothing.
1 Put the plug of the air purier in
the wall outlet.
» The air purier beeps.
» All lights go on once and
then go out again.
2 Touch the button to switch on
the appliance (g. j).
» The air purier operates
under the general mode by
default.
» When the air purier is
warming up, " " displays
on the screen.
» After 30 seconds, the air
purier shows the highest
level among PM2.5/Gas/
IAI on the screen. The air
quality sensor automatically
selects the appropriate air
quality light color (g. k).
3 Touch and hold the button for
3 seconds to switch o the air
purier.
Note
If the air purier stays connected
to the electrical outlet after
turning OFF, the air purier will
operate under the previous
settings when turned ON again.
Changing the Auto mode
setting
You can choose 4 auto modes: the
general mode, the Pollution mode,
the Gas mode or the Allergen mode.
Auto general mode
The Auto general mode is designed
to fast respond to even the slightest
change in the air that automatically
adjust fan speed to ensure optimal
performance.
10 EN
Auto allergen mode
The extra-sensitive Auto allergen
mode is designed to react to even
a small change in allergen levels in
the surrounding air (g. o).
Touch the Auto mode button
to select the Auto allergen mode.
» The IAI level displays on the
screen.
Changing the fan speed
There are several fan speeds
available.
When using the manual fan
speed settings, the purier will still
monitor the air quality, but it will
not automatically adjust the fan
speed if it detects changes in the air
quality.
Sleep mode ( )
In sleep mode, the air purier
operates quietly at a very low
speed.
Touch the fan speed button to
select the sleep mode (g. p).
» The " " displays on the
screen for 3 seconds and
then disappears.
» The sleep mode indicator
goes on.
» After 3 seconds, all the icons
are o, only the sleep mode
indicator goes on.
Touch the Auto mode button
to select Auto general mode
(g. l).
» Auto ( ) displays on the
screen for 3 seconds.
» Then the screen shows the
hightest level among PM2.5/
Gas/IAI.
Auto pollution mode
The specially designed auto
pollution mode responds to real
time particle level and eectively
remove airborne pollutants such as
PM2.5 (g. m).
Touch the Auto mode button
to select the Auto pollution
mode.
» Then the PM2.5 level
displays on the screen.
Auto Gas mode
The specially designed Auto
Gas mode is designed to quickly
remove indoor harmful gases such
as formaldehyde (normally found
in plywood), toluene (normally
found in painting), carpet, natural
gas, burning, cooking, air refresher,
perfume and hair spray, cleaning
agents, smoking, pesticide etc. and
maintain it at safe level (g. n).
Touch the Auto mode button
to select the Auto Gas mode.
» The Gas level displays on
the screen.
English
11EN
Manual
Touch the fan speed button
repeatedly to select the fan
speed you need (speed 1 or
speed 2) (g. q):
» After 3 seconds, the display
shows the previous mode.
Tip
If the air quality light lights up
blue, it indicates that the air
quality is good, and you can
select a lower fan speed. On
the other hand, if the air quality
light lights up red-purple or red,
it indicates that the air quality is
unhealthy, and you can select a
higher fan speed to purify the air
more quickly.
Turbo(t)
In Turbo mode, the air purier
operates on the highest speed.
Touch the fan speed button to
select the Turbo mode ( )
(g. r).
» The " " displays on the
screen.
» After 3 seconds, the display
shows the previous mode.
Using the light on/o
function
With the light on/o button, you can
switch on or o the air quality light,
the display screen and the function
indicator if desired.
1 Touch the light on/o button
once, the air quality light and
all buttons will go o and the
screen be dimmed (g. s).
2 Touch the light on/o button
again, all lights will be on again
(g. t).
Setting the child lock
You can use this function through
the Clean Home+ App. When
the function is enabled, the child
lock indicator displays on the
screen, all the other buttons are not
responsive. (g. u).
12 EN
5 Cleaning
Note
Always unplug the appliance
before you clean it.
Never immerse the appliance in
water or any other liquid.
Never use abrasive, aggressive,
or ammable cleaning agents
such as bleach or alcohol to
clean any part of the appliance.
Only the pre-lter is washable.
The air purier lter is not
washable nor vacuum cleanable.
Cleaning schedule
Frequency Cleaning method
When
necessary
Wipe the surface
of the appliance
with a soft dry
cloth
Clean the air
outlet cover
Every two
months
Clean the air
quality sensor
with a dry cotton
swab
When the pre-
lter cleaning
indicator
lights up and
F0 displays
on the screen
Clean the pre-
lter
Cleaning the body of the
appliance
Regularly clean the inside and
outside of the appliance to prevent
dusts from collecting.
1 Wipe away dust with a soft
dry cloth from the body of the
appliance.
Cleaning the air quality
sensor
Clean the air quality sensor every
two months for optimal functioning
of the appliance. Clean it more
frequently if you use the appliance
in a dusty environment.
Note
If the air purier is used in a
dusty environment, it may need
to be cleaned more often.
If the humidity level in the room
is very high, condensation may
develop on the air quality sensor
and the air quality light may
indicate a more poor air quality
even though the air quality is
actually good. If this occurs,
clean the air quality sensor or
use the air purier on a manual
speed setting.
1 Clean the inlet and outlet of
the air quality sensor with a soft
brush (g. v).
2 Remove the air quality sensor
cover (g. w).
English
13EN
3 Clean the air quality sensor,
the dust inlet and the dust
outlet with a damp cotton swab
(g. x).
4 Dry all parts thoroughly with a
dry cotton swab.
5 Reattach the air quality sensor
cover (g. y).
Cleaning the pre-lter
Clean the pre-lter when lights up
and F0 is displayed on the screen
(g. z).
1 Switch o the air purier and
unplug from the wall outlet.
2 Pull the top part of front cover
to remove it from the appliance
(g. c).
3 Press the two clips down and
pull the pre-lter towards you
(g. d).
4 If the pre-lter is very dirty, use
a soft brush to brush away the
dust. Then wash the pre-lter
under running tap water (g. {).
5 Allow the pre-lter to air dry
thoroughly before placing back
in the air purier.
6 Put the pre-lter back into the
appliance (g. h).
Note
Make sure that the pre-lters
are completely dry before you
put them back in the appliance.
If they are still wet, bacteria may
multiply in them and shorten the
lifetime of the pre-lters.
7 To reattach the front cover,
mount the cover onto the
bottom of the appliance rst (1).
Then, gently push the top of the
cover against the body of the
appliance (2) (g. i).
8 Put the plug of the air purier in
the wall outlet.
9 Touch the button to switch on
the appliance.
10 Touch and hold the reset button
for 3 seconds to reset the
pre-lter cleaning time.
11 Wash your hands thoroughly
after installing lters.
14 EN
6 Replacing the
air purification
filters
Understanding the
healthy air protect lock
This air purier is equipped with a
lter replacement indicator to make
sure that the air purication lter is
in optimal condition when the air
purier is operating. When the lters
need to be replaced, the lter code
displays on the screen and the lter
replacement alert ( ) lights up red.
If the lters are not replaced in time,
the air purier will stop operating
and automatically lock to protect
the air quality in the room. Replace
the lters as soon as possible
according to the lter code.
Replacing the lters
Note
The air purication lters are not
washable or reusable.
Always turn o the air purier
and unplug from the electrical
outlet before replacing the
lters.
Do not clean the lters with a
vacuum.
If the pre-lter is damaged, worn
or broken, do not use. Visit
www.philips.com/support or
contact the Consumer Care
Center in your country.
Filter alert chart ( g. |)
Filter alert light
status
Action
A5 displays
on the screen
and the lter
replacement
alert goes on.
Replace the
NanoProtect
lter Series 3
(FY3433)
C7 displays
on the screen
and the lter
replacement
alert goes on.
Replace the
NanoProtect
lter Active
Carbon (FY3432)
A5 and C7 display
on the screen
alternately
and the lter
replacement alert
goes on.
Replace both
lters
English
15EN
1 Turn o the air purier and
unplug from the power socket.
2 Take out the used air lter
according to the lter alert light
status displayed on the screen.
Discard used lters (g. }).
Note
Do not touch the pleated lter
surface, or smell the lter as it
has collected pollutants from
the air.
3 Remove all packaging material of
the new lters (g. f).
4 Put the unpacked air
purication lters back into the
appliance (g. g).
5 Put the plug of the air purier in
the power socket.
6 Touch the button to switch on
the appliance.
7 Touch and hold the reset button
for 3 seconds to reset the
lter lifetime counter.
Note
Wash your hands after changing
lters.
7 Storage
1 Turn o the air purier and
unplug from the wall outlet.
2 Clean the air purier, air quality
sensor and pre-lter (see
chapter ‘Cleaning’).
3 Let all parts air dry thoroughly
before storing.
4 Wrap the lters and pre-lter
separately in air tight plastic
bags.
5 Store the air purier, lters and
pre-lters in a cool, dry location.
6 Always thoroughly wash hands
after handling lters.
16 EN
8 Troubleshooting
This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the information
below, contact the Consumer Care Center in your country.
Problem Possible solution
The appliance
does not work
even though it is
plugged in.
Check if the top cover is properly installed.
The lter replacement light has been on continuously
but you have not replaced the corresponding lter.
As a result, the appliance is now locked. In this case,
replace the lter and reset the lter lifetime counter.
The airow that
comes out of
the air outlet
is signicantly
weaker than
before.
The pre-lter is dirty. Clean the pre-lter (see the
chapter "Cleaning").
The air quality
does not improve,
even though the
appliance has
been operating
for a long time.
Check if the packing material is removed from the
lters.
One of the lters has not been placed in the appliance.
Make sure that all lters are properly installed in the
following order, starting with the innermost lter:
1) NanoProtect lter Series 3 (FY3433);
2) NanoProtect lter Active Carbon (FY3432);
3) pre-lter.
The air quality sensor is wet. The humidity level in your
room is high and causes condensation. Make sure that
the air quality sensor is clean and dry (see the chapter
"Cleaning").
The color of the
air quality light
always stays the
same.
The air quality sensor is dirty. Clean the air quality
sensor (see the chapter "Cleaning").
English
17EN
Problem Possible solution
The appliance
produces a
strange smell.
The rst few times you use the appliance, it may
produce a plastic smell. This is normal. However, if the
appliance produces a burnt smell even if removing
lters, contact your Philips dealer or an authorized
Philips service center. The lter may produce smell
after being used for a while because of the absorption
of indoor gases. It’s recommended that you reactivate
the lter by putting it in direct sunlight for repeated
use. If odor still exists, replace the lter.
The appliance is
extra loud.
If the appliance is too loud, you can change the fan
speed to a lower fan speed level. When using the
appliance in a bedroom at night, choose the silent
speed.
The appliance
still indicates that
I need to replace
a lter, but I
already did.
Perhaps you did not reset the lter lifetime counter.
Switch on the appliance. Then touch and hold the
reset button ( ) for 3 seconds.
Error code "E1"
displays on the
screeen.
The motor has malfunctions. Contact the Consumer
Care Center in your country.
Error codes "E2",
"E3", "E4" or "E5"
displays on the
screen.
The sensor has malfunctions. Contact the Consumer
Care Center in your country.
18 EN
Problem Possible solution
The Wi-Fi setup is
not successful.
If the router your purier is connected to is dual –
band and currently it is not connecting to a 2.4GHz
network, please switch to another band of the same
router (2.4GHz) and try to pair your purier again. 5GHz
networks are not supported.
Web authentication networks are not supported.
Check if the purier is within range of the Wi-Fi router.
You can try to locate the air purier closer to the Wi-Fi
router.
Check if the network name is correct. The network
name is case-sensitive.
Check if the Wi-Fi password is correct. The password is
case-sensitive.
Retry the setup with the instructions in section ‘Set up
the Wi-Fi connection when the network has changed’.
The Wi-Fi connectivity can be interrupted by
electromagnetic or other interferences. Keep the
appliance away from other electronic devices that may
cause interferences.
Check if the mobile device is in airplane mode. Make
sure to have the airplane mode deactivated when
connecting to the Wi-Fi network.
Consult the help section in the App for extensive and
up-to-date troubleshooting tips.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222

Philips AC4558/50 Instrukcja obsługi

Typ
Instrukcja obsługi