Haier H3F-280WF Instrukcja obsługi

EN

User Manual

Upright Freezer

H3F-280*F

* - Colour code

Thank You

EN

2

Legend

General information and tips

Warning – Important Safety information

Environmental information

Disposal

Help protect the environment and human health. Put

the packaging in applicable containers to recycle it.

Help to recycle waste of electrical and electronic ap-

pliances. Do not dispose appliances marked with this

symbol with the household waste. Return the product

to your local recycling facility or contact your municipal

oce.

Thank you for purchasing a Haier Product.

Please read these instructions carefully before using this appliance. The instructions con-

tain important information which will help you get the best out of the appliance and ensure

safe and proper installation, use and maintenance.

Keep this manual in a convenient place so you can always refer to it for the safe and proper

use of the appliance.

If you sell the appliance, give it away, or leave it behind when you move house, make sure

you also pass this manual so that the new owner can become familiar with the appliance

and safety warnings.

Warning!

Risk of injury or suocation!

Refrigerants and gases must be disposed of professionally. Ensure that the tubing of

the refrigerant circuit is not damaged before being properly disposed of. Disconnect

the appliance from the mains supply. Cut o the mains cable and dispose of it. Remove

the door, the door catch and seals, to prevent children and pets to get closed in the ap-

pliance.

EN

Content

3

1 - Safety .................................................................................................................................................4

2 - Intended Use .................................................................................................................................... 8

3 - Product Description .......................................................................................................................9

4 - Control panel ................................................................................................................................. 10

5 - Use ................................................................................................................................................... 11

6 - Energy saving ................................................................................................................................ 11

7 - Equipment ..................................................................................................................................... 11

8 - Care and Cleaning ........................................................................................................................ 15

9 - Troubleshooting ........................................................................................................................... 17

10 - Installation ................................................................................................................................... 20

11 - Technical Data ............................................................................................................................ 24

12 - Customer Service...................................................................................................................... 25

1 - Safety

EN

4

WARNING!

Before rst use

▶ Make sure there is no transport damage.

▶ Remove all packaging and keep out of children´s reach.

▶ Wait at least six hours before installing the appliance in order to

ensure the refrigerant circuit is fully ecient.

▶ Handle the appliance always with at least two persons because it

is heavy.

Installation

▶ The appliance should be placed in a well-ventilated place. Ensure

a space of at least 10 cm above and around the appliance.

▶ Do not cover air vent openings.

▶ Never place the appliance in a damp area or location where it

might be splashed with water. Clean and dry water splashes and

stains with a soft clean cloth.

▶ Do not install the appliance in direct sunlight or in the near of heat

sources(e.g. stoves, heaters).

▶ Install and level the appliance in an area suitable for its size and use.

▶ Keep ventilation openings in the appliance or in the in-built struc-

ture clear of obstruction.

▶ Make sure that the electrical information on the rating plate agrees

with the power supply. If it does not, contact an electrician.

▶ The appliance is operated by a 220-240 VAC/50 Hz power sup-

ply. Abnormal voltage uctuation may cause the appliance to fail

to start, or damage to the temperature control or compressor, or

there may be an abnormal noise when operating. In such case, an

automatic regulator shall be mounted.

▶ Use a separate earthed socket for the power supply which is ea-

syly accessible during cleaning. The appliance must be earthed.

▶ Only for UK: The appliance’s power cable is tted with 3-cord

(grounding) plug that ts a standard 3-cord (grounded) socket.

Never cut o or dismount the third pin (grounding). After the ap-

pliance is installed, the plug should be accessible.

▶ Do not use multi-plug adapters and extension cables.

▶ Ensure that the power cable is not trapped by the freezer. Do not

step on the power cable.

▶ Do not damage the refrigerant circuit.

Before switching on the appliance for the rst time, read the following safety

hints!:

EN

1 - Safety

5

WARNING!

Daily use

▶ This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental ca-

pabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

▶ Keep away children under 3 years of age from the appliance un-

less they are constantly supervised.

▶ Children shall not play with the appliance.

▶ If cool gas or other inammable gas is leaking in the vicinity of the

appliance, turn o the valve of the leaking gas, open the doors

and windows and do not unplug a plug in the power cable of the

freezer or any other appliance.

▶ Notice that the appliance is set for operation at a specic ambient

range between 10 and 43 °C. The appliance may not work prop-

erly if it is left for a long period at a temperature above or below

the indicated range.

▶ Do not place unstable articles (heavy objects, containers lled

with water) on top of the freezer, to ovoid personal injury caused

by falling or electric shock caused by contact with water.

▶ Open and close the doors only with the handles. The gap between

the doors and between the doors and the cabinet is very narrow.

Do not extend your hands in these areas to avoid pinching your

ngers. Open or close the freezer doors only when there are no

children standing within the range of door movement.

▶ Do not store or use inammable, explosive or corrosive materials

in the appliance or in the vicinity.

▶ Do not store medicines, bacteria or chemical agents in the ap-

pliance. This appliance is a household appliance. It is not recom-

mended to store materials that require strict temperatures.

▶ Never store liquids in bottles or cans (besides high percentage

spirits) especially carbonated beverages in the freezer, as these

will burst during freezing.

▶ Check the condition of food if a warming in the freezer has taken place.

▶ Do not set unnecessarily low temperature in the freezer com-

partment. Attention: Bottles can burst.

1 - Safety

EN

6

WARNING!

Daily use

▶ Do not touch frozen goods with wet hands (wear gloves). Espe-

cially do not eat ice lollies immediately after removal from the

freezer compartment. There is the risk to freeze or the formation

of frost blisters. FIRST aid: keep immediately under running cold

water. Do not pull away!

▶ Do not touch the inside surface of the freezer when in operation,

especially with wet hands. Your hands may freeze onto the sur-

face.

▶ Unplug the appliance in the event of a power interruption or be-

fore cleaning. Allow at least 5 minutes before restarting the appli-

ance, as frequent starting may damage the compressor.

▶ Do not use electrical devices inside the food storage compart-

ments of the appliance, unless they are of the type recommend-

ed by the manufacturer.

Maintenance/cleaning

▶ Make sure children are supervised if they carry out cleaning and

maintenance.

▶ Disconnect the appliance from the electrical supply before un-

dertaking any routine maintenance. Allow at least 5 minutes be-

fore restarting the appliance, as frequent starting may damage

the compressor.

▶ Hold the plug, not the cable, when unplugging the appliance.

▶ Do not scrape o frost and ice with sharp objects. Do not use

sprays, electric heaters like heater, hair dryer, steam cleaners or

other sources of heat in order to avoid damage to the plastic parts.

▶ Do not use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the man-

ufacturer.

▶ Do not spray or ush the appliance during cleaning.

▶ Do not use water spray or steam to clean the appliance.

▶ If the supply cord is damaged, it must be replaced by the manu-

facturer, its service agent or similarly qualied persons in order to

avoid a hazard.

▶ Do not try to repair, disassemble or modify the appliance by your-

self. In case of repair please contact our customer service.

EN

1 - Safety

7

WARNING!

The appliance contains the ammable refrigerant ISOBUTHANE

(R600a). Make sure the refrigerant circuit is not damaged during

transportation or installation. Leaking refrigerant may cause eye

injuries or ignite. If a damage has occurred, keep away open re

sources, thoroughly ventilate the room, do not plug or unplug the

power cords of the appliance or any other appliance. Inform the

customer service.

In case of eyes get into contact with the refrigerant, rinse immedi-

ately it under running water and call immediately the eye specialist.

Refrigerant gas information

WARNING!

▶ Taking care to avoid causing a re by igniting ammable material.

▶ WARNING: When positioning the appliance, ensure the supply

cord is not trapped or damaged.

▶ WARNING: Do not locate multiple portable socket-outlets or

portable power supplies at the rear of the appliance.

▶ Do not store explosive substances such as aerosol cans with a

ammable propellant in this appliance.

▶ For ammable refrigerants is used in the freezer, please be care-

ful when installing, handling, serving and recycling the appliance.

▶ Please contact to the service agent to dispose the appliance be-

cause the ammable blowing gas was used.

2 - Intended use

EN

8

2.1 Intended Use

“This appliance is intended to be used in household and similar applications such as

– sta kitchen areas in shops, oces and other working environments;

– farm houses and by clients in hotels, motels and other residential type environments;

– bed and breakfast type environments;

– catering and similar non-retail applications.

This appliance is intended for freezing food. It has been designed exclusively for use in dry-

interior house-holds. It is not intended for commercial or industrial use. On demand this

appliance can be used as fresh food compartment.

Changes or modications to the device are not allowed. Unintended use may cause haz-

ards and loss of warranty claims.

2.2 Accessories

Check the accessories and literature in accordance with this list:

User manualWarranty cardEnergy

label

Axe covers

Upper left

hinge for door

reversibility

Upper left

hinge cover

2.2

EN

3 - Product description

9

Notice: Dierences

Due to technical changes and dierent models, some of the illustrations in this manual

may dier from your model.

Picture of appliance (Fig. 3)

1 Control panel

2 LED light

3 Multi-air ow

4 Glass shelves

5 Drawers

6 Adjustable feet

7 Removable door racks

8 Door handle

3

7

8

2

1

3

6

4

5

4 - Control panel

EN

10

Control panel

(Fig. 4)

A Fridge mode

B Soft freeze mode

C Freeze temperature - Eco

D Freeze temperature

E Freeze temperature

F Freeze temperature and

Super freeze mode

G Child lock

4

A

a

D

d

C

c

B

b

G

g

E

e

F

f

EN

5 - Use

11

5.1 Before rst Use

▶ Remove all packaging materials, keep them out of childrens reach and dispose them

in an environmentally friendly manner.

▶ Clean the inside and outside of the appliance with water and a mild detergent before

putting any food in it.

▶ After the appliance has been levelled and cleaned, wait for at least 6 hours before

connecting it to the power supply. See Section INSTALLATION.

▶ Precool the compartment for 2 hours at high settings before loading with food. To

do so, please set the temperature to -20 °C or -24 °C.

5.2 Switching the appliance on /o

The appliance is in operation as soon as it is connected to the power supply.

▶ The freezer temperature is automatically set to -18 °C. This is the recommended

setting and the ideal temperature for frozen goods. If desired, you can change the

temperatures manually. Please see ADJUSTING THE TEMPERATURE.

Indicators (a-g) will ash once consequtively. If the door is closed, the display switches o

after 30 seconds. The panel lock might be active.

Notice: Presettings

▶ The appliance is preset to the recommended temperature of -18 °C. Under normal

ambient condition you don´t need to set a temperature.

▶ When the appliance is switched on after being disconnected from the main power

supply, it may take up to 12 hours for the correct temperature to be reached.

Empty the appliance before switching o. To switch o the appliance, pull the power cord

out o the power socket.

5.3 Standby-mode of display

When the door is closed the display screen turns o automatically 30 seconds after without

operation. The display locks automatically. It lights up automatically when touching any but-

ton or opening the door.

5.4 Display lock and unlock

Automatic locking

Display is automatically locked after 30 seconds without operation.

Manual locking

When the display is unlocked, press “Child lock” (G) and hold for 3 seconds, after a beep,

“Child lock”(g) indicator is light, display is locked. When the display is locked, press “Child

lock” (G) and hold for 3 seconds, after a beep, “Child lock”(g) indicator is o, display is un-

locked.

5 - Use

EN

12

Notice: Display lock

When display is locked, functions such as temperature setting or super freeze are di-

sabled. When above operation is attempted, Child lock indicator will blink for 3 times, to

remind that the display is locked.

5.5 Temperature setting

When display is unlocked, by touching dierent temperature buttons, dierent tempera-

ture could be set, this process will be accompanied by beeps.

Freeze, soft freeze(-7°C)(B) and Fridge(4°C)(A) mode has big dierence in temperature,

and is for dierent food storage. Prior to making any mode change, please make sure to

change the food inside the freezer, so that food will not be damaged because of mode

change.

5.6 Freeze mode (-16°C to -24°C) (C - F)

When display is unlocked, by touching dierent freeze temperature buttons, dierent

temperature could be set, indicators on left of the touch button will be light and others

will be o. Temperature could be set to “-16°C”,“-18°C”, “-20°C” and “-24°C”.

5.7 Soft freeze mode (-7°C) (B)

When display is unlocked, by touching (-7°C) (B), indicator “-7°C” (b) will be light, the free-

zer works in soft freeze mode. After stabilization, temperature is around -7°C.

5.8 Fridge mode(4°C) (A)

When display is unlocked, by touching (4°C) (A) and hold for 3 seconds, indicators “4°C”(a)

will be light, the freezer works in fridge mode. After stabilization, temperature is around

4°C.

5.9 Super freeze mode (F)

Super freeze mode is optimal for preserving food nutrition, it could freeze food in less

time. Before putting lots of food inside the freezer, activate super freeze function to have

lower temperature, to make sure better freeze result.

When display is unlocked, touch and hold (-24°C) (F) for 3 seconds, indicators (b - f) will

be light, the freezer works in super freeze mode. To deactivate manually super freeze

function, repeat steps above. If not deactivated manually, the function will be deactivated

automatically after 50 hours.

If you have a large amount of food to freeze at one time, it is recommended that the

function is activated 24 hours before inserting food. Function will stop automatically af-

ter 50 hours or manually. Power consumption will increase when this function is on.

Notice: Super freeze

In super freeze mode, temperature could not be adjusted. If you do so, super freeze

indicator will blink for 3 times to remind that the freezer is in super freeze mode.

EN

5 - Use

13

5.10 Eco mode (-16°C) (C)

When display is unlocked, by touching (-16°C) (C) the appliance is set into Eco mode. In

this mode the energy consumption is lower, while apropriate freezing performance is still

guaranteed. To exit the Eco mode select other temperature.

5.11 Power-o memory

This freezer has power-o memory, settings before power-o will be memorized. When

power is back on, freezer will return to settings before power-o and continue to func-

tion. Child lock is not memorized, after power back on, display is unlocked.

5.12 Door open alarm

When freezer is kept open for more than 1 minute, beeper will make 3 beeps with interval

of 0.5 second. The beeps will be repeated every 30 seconds if door is kept open. The

beeps will stop until door is closed or after 7 mins of door opening. The beeper stops

beeping and freezer light goes o.

5.13 High temperature alarm

This freezer is equipped with high temperature alarm. In freeze mode or super freeze

mode, if current temperature setting indicator blinks with beeps, touch any button, the

beep will stop, but current temperature setting indicator keeps blinking, that means tem-

perature in the freezer is too high. Please check if freezer door is tightly closed or if large

amount of warm food is put inside the freezer. After a period, current temperature in-

dicator will stop blinking. If it does not stop blinking for a long period, and beeps that are

manually cancelled come back, please contact aftersales service.

5.14 Error indication

This freezer is equipped with error indication. When an error is encountered, display will

blink every 1/4 second dierent codes for dierent errors. In this situation, the freezer

could still freeze but user should contact aftersales service as soon as possible for opti-

mal control of the freezer.

6 - Energy saving tips

EN

7 - Equipment

14

Energy saving tips

▶ Make sure the appliance is properly ventilated (see INSTALLATION).

▶ Do not install the appliance in direct sunlight or in the near of heat sources (e.g.

stoves, heaters).

▶ Avoid unnecessarily low temperature in the appliance. The energy consumption in-

creases the lower the temperature in the appliance is set.

▶ Allow warm food to cool down before placing it in the appliance.

▶ Open the appliance door as little and as briey as possible.

▶ Make sure the door always closes correctly and unimpaired by food position. Keep

door seals clean.

▶ Defreeze frozen food in a fridge.

▶ Clean the rear of the appliance regularly. Dust increases energy consumption.

7.1 Removable door racks

The door rack can be removed for cleaning:

Place hands on each side of the rack, lift it upwards (1)

and pull it out (2) (Fig. 7.3).

In order to insert the door rack, the above steps are

carried out in reverse order.

7.2 Glass shelves

1. To take out a shelf, remove it rst by uplifting its hind

edge (1) and pulling it out (2) (Fig. 7.2).

2. To reinstall it, put it on the lugs on both sides and

push it to the most rearward position until the rear

of the shelf is xed inside the slots in the sides

1

2

1

7.1

7.2

EN

8- Care and Cleaning

15

WARNING!

Disconnect the appliance from the power supply before cleaning.

8.1 General

Clean the appliance when only little or no food is stored.

WARNING!

▶ Do not clean the appliance with hard brushes, wire brushes, detergent powder, petrol,

amyl acetate, acetone and similar organic solutions, acid or alkaline solutions. Please

clean with special freezer detergent to avoid damage.

▶ Do not spray or ush the appliance during cleaning.

▶ Do not scrape o frost and ice with sharp objects.

▶ Do not use sprays, electric heaters like heater, hair dryer, steam cleaners or other

sources of heat in order to avoid damage to the plastic parts.

▶ Do not clean the cold glass shelves with hot water. Sudden temperature change may

cause the glass to break .

▶ Do not touch the inside surface of the freezer storage compartment, especially with

wet hands, as your hands may freeze onto the surface.

▶ In case of heating check the condition of frozen goods.

▶ Do not try to repair the appliance by yourself. In case of repair please contact our

customer service.

▶ Always keep the door gasket clean.

▶ Clean the inside and housing of the appliance with a

soft cloth or sponge dampened in warm water and

neutral detergent (Fig. 8.1).

▶ Rinse and dry with soft cloth.

▶ Do not clean any of the parts of the appliance in a

dishwasher.

▶ Clean the accessory only with warm water and mild

neutral detergent.

8.1

8- Care and Cleaning

EN

16

8.2 Non-use for a longer period

If the appliance is not used for an extended period of time:

▶ Take out the food.

▶ Unplug the power cord.

▶ Clean the appliance as described above.

▶ Keep the door and freezer drawers open to prevent the creation of bad odours inside.

Remove the door of the appliance (open the door and hold it before removing the screws)

to avoid children entering into the appliance and getting locked in.

Notice: Switch o

To ensure the service life of the appliance, only turn it o only if strictly necessary.

8.3 Moving the appliance

1. Remove all food and unplug the appliance.

2. Secure shelves and other moveable parts in the freezer with adhesive tape.

3. Close the door and secure it with tape.

4. Do not tilt the freezer more than 45° to avoid damaging the refrigerating system.

5. Wrap the feet of the freezer to avoid scratching the oor. Never move the freezer

forcefully.

WARNING!

▶ Do not lift the appliance by its handles.

▶ Never place the appliance horizontally on the ground.

EN

9 - Troubleshooting

17

Many occuring problems could be solved by yourself without specic expertise. In case

of a problem please check all shown possibilities and follow below instructions before you

contact an after sales service. See CUSTOMER SERVICE.

WARNING!

▶ Before maintenance, deactivate the appliance and disconnect the mains plug from

the mains socket.

▶ Electrical equipment should be serviced only by qualied electrical experts, because

improper repairs can cause considerable consequential damages.

▶ A damaged supply should only be replaced by the manufacturer, its service agent or

similarly qualied persons in order to avoid a hazard.

The acoustic alarm can be switched o by pressing any button..

9.1 Troubleshooting

Problem Possible Cause Possible Solution

The compressor

does not work.

• Mains plug is not connected in the

mains socket.

• Connect the mains plug.

The appliance runs

frequently or for a

too long period of

time.

• The indoor or outdoor tempera-

ture is too high.

• The appliance has been o power

for a period of time.

• The door of the appliance is not

tightly closed.

• The door has been opened too

frequently or for too long.

• The temperature setting is too low.

• The door gasket is dirty, worn,

cracked or mis-matched.

• The required air circulation is not

guaranteed.

• The interior is covered in ice.

• In this case, it is normal for the

appliance to run longer.

• Normally, it takes 8 to 12 hours

for the appliance to cool down

completely.

• Close the door and ensure the

appliance is located on a level

ground and there is no food or

container jarring the door.

• Do not open the door too fre-

quently.

• Set the temperature higher un-

til a satisfactory temperature is

obtained. It takes 24 hours for

the temperature to become

stable.

• Clean the door gasket or re-

place them by the customer

service.

• Ensure adequate ventilation.

• Defrost the appliance.

The appliance

makes abnormal

sounds.

• The appliance is not located on

level ground.

• The appliance touches an object

close to it.

• The appliance stands on a wooden

oor or near wooden walls.

• Level the appliance.

• Remove objects around the

appliance.

• Wood amplies the sound. Set

the appliance somewhere else.

9 - Troubleshooting

EN

18

Problem Possible Cause Possible Solution

The appliance

makes a clicking

sound

• This is normal. It is caused by the

refrigeration unit switching on or

o.

• -

A slight sound is to

be heard similar to

that of owing wa-

ter.

• This is normal. • -

The appliance makes a

motor sound

• The refrigeration unit has just

turned itself on. This is normal

• -

It is not cold enough

inside th

e appli-

ance.

• The temperature is set too high.

• Goods that are too warm have

been stored.

• Too much food has been stored at

a time.

• The goods are too close to each

other.

• The door is not tightly closed.

• The door has been opened too

frequently or for too long.

• Reset the temperature.

• Always cool down goods be-

fore storing them.

• Always store small quantities of

food.

• Leave a gap between several

foods allowing air owing.

• Close the door.

• Do not open the door too fre-

quently.

It is too cold

inside

th

e appliance.

• The temperature is set too low.

• The Fast-freezing function is ac-

tivated or has been running too

long.

• Reset the temperature.

• Switch o the Fast-freezing

function.

Moist

ure accumu-

lates on the surface

of the appliance

.

• The climate is too warm and too

damp.

• This is normal in damp climate

and will change when the hu-

midity decreases. Wipe dry with

a cloth.

Strong ice and frost

in the freezer com-

partment.

• The goods were not adequately

packaged .

• The door is not tightly closed.

• The door has been opened too

frequently or for too long.

• The door gasket is dirty, worn,

cracked or mis-matched.

• Something on the inside prevents

the door from closing properly.

• Always pack the goods well.

• Close the door.

• Do not open the door too fre-

quently.

• Clean the door gasket or re-

place them by the customer

service.

• Reposition the shelves, door

racks, or internal containers to

allow the door to close.

Th

e cooling system

does n

ot work.

• Mains plug is not connected to the

mains socket.

• The power supply is not intact.

• Connect the mains plug.

• Check the electrical supply to

the room. Call the local elec-

tricity company!

EN

9 - Troubleshooting

19

Problem Possible Cause Possible Solution

The sides of the

cabinet and door

strip get warm.

• This is normal. • -

You hear an alarm

signal.

• The door is open

• The temperature inside product is

too high

• Close the door or silence the

alarm manually.

The door is diucult

to open.

• Once the appliance runs, it has an

internal vacuum.

• Open the door seal gently to let

air enter the appliacne.

The door can’t be

closed properly. It

always leaves a gap.

• Because of the appliances’s low

temperature, the door seal can

easily get hard and deformed.

• Use a hair dryer or put a hot

towel on the spot where the

gasket is deformed.

• When the gasket is soft once

again, close the door and com-

press it tightly.

9.2 Power Interruption

In the event of a power cut, food should remain safely cold for about 18 hours. Follow

these tips during a prolonged power interruption, especially in summer:

▶ Open the door as few times as possible.

▶ Do not put additional food into the freezer during a power interruption.

▶ If prior notice of a power interruption is given and the interruption duration is longer

than 15 hours, make some ice and put it in a container in the top of the freezer com-

partment.

▶ As temperature in the freezer will rise during a power interruption or other failure,

the storage period and edible quality of food will be reduced. Any food that defrosts

should be either consumed, or cooked and refrozen (where suitable) soon after-

wards in order to prevent health risks.

Notice: Memory function during power interruption

After restoration of power the appliance continues with the settings that were set be-

fore the power failure.

10 - Installation

EN

20

10.1 Unpacking

▶

WARNING!

▶ The appliance is heavy. Always handle with at least two persons.

▶ Keep all packaging materials out of childrens reach and dispose them in an environ-

mentally friendly manner.

Take the appliance out of the packaging.

▶ Remove all packaging materials.

10.2 Environmental conditions

The room temperature should always be between 18 °C and 43 °C, since it can inuence

the temperature inside the appliance and its energy consumption. Do not install the appli-

ance near other heat-emitting appliances (ovens, refrigerators) without isolation.

10.3 Space requirements

Required space to open the door (Fig. 10.3):

Width

in mm

Depth

in mm

Distance to wall

in mm

W1 W2 D1 D2 D3 D4

595 955 592 1105 1215 100

10.4 Ventilaton cross-section

To achieve sucient ventilation of the appliance for

safety reasons, the information of the required ventila-

tion cross sections must be observed (Fig. 10.4).

10.5 Aligning the appliance

The appliance should be placed on a at and solid sur-

face. If the appliance is placed on a pedestal, strong and

re-resistant materials must be used. Never use the

foam packing material as a pedestal.

1. Tilt the appliance slightly backwards (Fig. 10.5).

2. Set the feet to the desired level.

3. The stability can be checked by alternately bump-

ing on the diagonals. The slight swaying should be

the same in both directions. Otherwise the frame

can warp; possible leaking door seals are the result.

A low tendency to the rear eases the closing of the

door.

W2

D1

D3

D2

W1

D4

10.3

10 cm

10.4

max 45°

1.

2.

3.

10.5

Strona jest ładowana ...

Haier H3F-280WF Instrukcja obsługi

Haier H3F-280WF Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty