Pacic Accessory Corporation - 1502 S. Santa Fe Street, Santa Ana, CA 92705

www.go2pac.com Voice: 714-835-3022 Fax: 714-835-3233 [email protected]

On the [28A] connector:

1. Connect PK/W wire - pin #1 to ground. Connect O/BK - pin #8 to ground with a 560 ohm resistor inline.

2. Splice BN/BK - pin #2 and V/BK - pin #7 together with a 1k ohm resistor inline. Splice GY/GN - pin #3 and GY/W - pin #6

together with a 150 ohm resistor inline. Splice GN/BE - pin #4 and BN/W - pin #5 together with a 47 resistor inline.

3. Connect all remaining ends of resistors together and connect to SWC input wire of interface.

Harley Davidson

1997 and older