Yamaha DXS15XLF Instrukcja obsługi

Marka: Yamaha

Model: DXS15XLF

Typ: Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

POWERED LOUDSPEAKER POWERED SUBWOOFER

Reference Manual

Contents

Introduction 3

DZR(-D), DXS-XLF(-D) Series Product Lineup .................................................... 3

Main Features ...................................................................................................... 3

Main Functions .................................................................................................... 4

Structure of Manuals............................................................................................ 4

Functions 5

Full-range Speaker (Rear) ................................................................................... 5

Subwoofer (Rear)................................................................................................. 5

Rear Panel Full range Subwoofer ............................................................... 6

Power Section .............................................................................................. 7

Dante Section Dante model ...................................................................... 8

Panel Operations 9

Basic Operations ................................................................................................. 9

HOME Screen and Its Functions ....................................................................... 10

Alert Messages.................................................................................................. 12

Initialization ........................................................................................................ 12

Screen Functions 13

Screen Structure................................................................................................ 13

PRESET Screen ................................................................................................. 13

RECALL...................................................................................................... 14

STORE........................................................................................................ 14

CLEAR........................................................................................................ 14

TITLE .......................................................................................................... 14

PROTECT ................................................................................................... 15

HPF Screen Full range ................................................................................. 15

LPF Screen Subwoofer ................................................................................ 15

D-CONTOUR Screen Full range .................................................................. 15

D-XSUB Screen Subwoofer ......................................................................... 16

EQ Screen ......................................................................................................... 16

DELAY Screen ................................................................................................... 16

CARDIOID Screen Subwoofer ..................................................................... 17

ROUTER Screen................................................................................................ 18

UTILITY Screen ................................................................................................. 19

PANEL SETUP............................................................................................ 19

PANEL LOCK ............................................................................................. 20

DEVICE BACKUP....................................................................................... 23

DANTE SETUP Dante model ................................................................... 23

NETWORK Dante model ......................................................................... 25

DEVICE INFORMATION ............................................................................. 26

INITIALIZE.................................................................................................. 26

LOG ........................................................................................................... 27

UPDATE FIRMWARE.................................................................................. 27

Muting from an External Device Dante model ............................................. 28

About Dante Dante model 29

Dante Network System ...................................................................................... 29

Dante Settings ................................................................................................... 30

Connecting to Dante Devices ........................................................................... 30

Integration with Yamaha Digital Mixers ............................................................. 31

Reference 33

Precautions when Using the USB Terminal ....................................................... 33

Using USB Flash Drives .................................................................................... 33

Function Tree ..................................................................................................... 34

Message List ..................................................................................................... 37

Patch Correspondence Chart when Using Quick Config ................................. 39

Troubleshooting ................................................................................................. 40

Dante-related Terms .......................................................................................... 41

Specifications .................................................................................................... 42

Dimensions........................................................................................................ 46

Block Diagram................................................................................................... 52

Index.................................................................................................................. 53

Introduction

Thank you for purchasing the Yamaha DZR(-D) series POWERED LOUDSPEAKER and DXS-XLF(-D) series POWERED SUBWOOFER. (See the series

product lineup below.) These products are designed for live performance, sound reinforcement and fixed installation sound system applications. This

manual provides instructions on installation, setup, configuring of the connections, and detailed operation of these speakers for installers, constructors,

or general users familiar with speakers. Please read this manual together with the Owner’s Manual that comes packaged with the product to get full use

out of this product and its functions.

* Unless specifically noted otherwise, illustrations in this manual are based on the DZR12-D and DXS18XLF-D.

* In this manual the Dante model (-D) series is referred to as DZR-D, DXS-XLF-D.

• Strong plywood cabinet features a high output Class D amplifier. Full-range models feature powerful sound pressure capability in a lightweight package by using

neodymium magnets.

• Optimized pairing of a highly durable speaker unit with a fixed directional horn, for sparkling highs with punchy and powerful bass.

• Full-range models feature an FIR filter for crossover and frequency adjustments. Low latency for DSP and AD/DA, thanks to 96 kHz sampling rate.

• LCD screen for loading presets, and for making precise graphical adjustments to EQ, delay, and routings. Easily transfer settings by using a USB flash drive.

• Dante models (-D) support the transmission of digital audio and remote control via a Dante network.

• 2-way models support use on a stand or use as a floor monitor. Rotation of the horn, several rigging points, and optional brackets allow a variety of installation meth-

ods.

Type Standard Model Dante Model (-D)

Full Range

3-way 15" DZR315 DZR315-D

2-way 15" DZR15 DZR15-D

2-way 12" DZR12 DZR12-D

2-way 10" DZR10 DZR10-D

Subwoofer

18" DXS18XLF DXS18XLF-D

15" DXS15XLF DXS15XLF-D

DZR(-D), DXS-XLF(-D) Series Product Lineup

Main Features

Introduction

 Processing

Incorporates new FIR filter technology in addition to signal processing know-how built up through years of product development experience in order to deliver the

next level in sound quality. The DSP, AD/DA sampling frequency (Fs) is 96 kHz.

 Display See page 6

The display enables users to set a broad range of functions using simple commands while finely tuning EQ, delay, routing and other settings using a graphical inter-

face. Includes a back light for adjusting luminance.

 Presets See pages11, 13

A set of recall-only factory presets (one to three) and savable user presets (eight) are available. Select the desired preset from the factory presets when using the

DZR and DXS-XLF series product together.

 Network See pages8, 29

Dante-compatible models not only allow for audio input/output across a Dante network, they also enable users to control and monitor this product on a computer,

etc.

 Integration with Yamaha digital mixers See page 31

Connect a Dante-compatible model with a TF series, CL series or QL series device over a network to monitor patching and device status without a Dante Controller.

Yamaha provides a unique system solution centered around its digital mixers.

 Other useful functions

• Safeguard functions are in place to prevent malfunction. Alert messages and other notifications are used to inform users when an issue occurs. See page 12

• Comes equipped with a panel lock feature preventing operational errors and tampering. Connect a USB flash drive with the PIN code saved to it to temporarily

unlock the panel. Remove the stick to lock the panel again. See page 20

• Internal data can be stored on a USB flash drive, making it easy to copy the same settings to a replacement device. See page 23

• Owner’s Manual (included with the product)

This manual describes product functions and basic product operation.

• Reference Manual (this manual)

This manual describes settings and operations in detail.

Main Functions

Structure of Manuals

Functions

q Tiltable pole socket

This mount has two pole sockets. You can choose the

angle of the speaker so that it is positioned horizontal

to the floor or tilting down toward the floor by 7

degrees. Compatible with commercially available

speaker stands and speaker poles of 35 mm diameter.

(These sockets are not available on the DZR315(-D).)

w Screw holes for U-bracket

For installing with the separately sold U-brackets.

(These sockets are not available on the DZR315(-D).)

e Screw holes for eye bolts

For installing the speaker using eye bolts. The screw

holes for eye bolts go through the cabinet wall.

r Dual pole sockets

Compatible with commercially available speaker poles

of 35 mm diameter and M20 screw.

When using a pole socket to install a speaker, observe

the following conditions for safety.

t Feet cups

When stacking multiple speakers, align the rubber feet

of the upper speaker to the feet cups of the lower one.

y Wheel mounting screws

For installing the separately sold Yamaha SPW-1

wheels. If you are not using wheels, do not remove

these screws. Otherwise, the leakage of air will affect

sound quality.

Full-range Speaker (Rear)

Bottom

FRONT

7°

0°

7°

Pole socket

Subwoofer (Rear)

35 mm

diameter

M20 screw

Subwoofer Speaker to be installed

Length of

the pole

DXS18XLF(-D)

Weight: 26 kg or less

Height: 76.0 cm or less

(DZR15(-D) or smaller)

104 cm or less

DXS15XLF(-D)

Weight: 22 kg or less

Height: 64.5 cm or less

(DZR12(-D) or smaller)

82 cm or less

Weight: 18 kg or less

Height: 53.7 cm or less

(DZR10(-D) or smaller)

104 cm or less

• For more information about installing wheels and related

precautions, refer to the corresponding manual for the

wheels.

• Do not install any item other than the SPW-1 wheels.

NOTE

Functions

q USB terminal

Connect a USB flash drive to save/load internal mem-

ory on this product. USB flash drives are also used to

perform firmware updates. You can also save a PIN

code used to lock the panel to a USB flash drive, and

then connect the USB flash drive to temporarily unlock

the panel.

For more information about using the USB terminal

and USB flash drives, see “Precautions when Using

the USB Terminal” and “Using USB Flash Drives”

(page 33).

w [LIMIT] indicator

Lights red when the limiter for protecting the speaker

is active. If the indicator remains on, lower the level of

the input signal. This flashes together with the e

[POWER] indicator when a serious system error is

detected at product startup. This indicator will turn off

automatically when BLACKOUT is ON (see page 20).

e [POWER] indicator

Lights green when the power is on. Flashes when the

protection function is active and the output is muted.

(“MUTED” appears on the HOME screen in the display

at this time.) This flashes together with the w [LIMIT]

indicator when a serious system error is detected at

product startup.

r Display

Shows the settings for various functions. Users can

finely tune EQ, delay, routing and other settings using

a graphical interface. The display includes a back

light, enabling users to adjust the brightness and con-

trast of the display, configure BLACKOUT (automatic

off) settings (see page 20).

t Main knob

Turn the knob to move the cursor that appears in the

display and change parameter values. Press the knob

to execute a setting.

y [ ] (Back) key

Press this button to return to the previous screen.

Press and hold this button for at least one second to

return to the HOME screen.

u [LEVEL] controls

Adjust the level that is input to the [INPUT] jacks.

Rear Panel

Full range Subwoofer

Available only on Dante models. See the “Dante Sec-

tion” (page 8).

The [POWER] indicator will not automatically turn off even if

BLACKOUT (page 20) is ON.

NOTE

• The display will darken after one minute of panel inactivity

and turn off after 25 minutes of inactivity to protect the dis-

play, even if the BLACKOUT (page 20) setting is off. Either

press a key on the rear panel or press the main knob to

wake the display.

• The display will start flashing when the Identify function is

used on a Dante Controller or Dante devices (each of the

TF, CL, and QL series, etc.).

NOTE

Functions

i [INPUT] jacks

Combo jacks for line level input. Accept both XLR and

phone plugs. This enables you to mix levels for two

input signals separately. Not compatible with mic

input.

o [THRU/OUTPUT] jacks

XLR output jacks. Switch the DZR(-D) series channel 2

and DXS-XLF(-D) series channel 1 and 2 output sig-

nals using the !0 [THRU/DSP OUT] switch. The DZR(-

D) series channel 1 output is fixed to [THRU].

!0 [THRU/DSP OUT] switch

This switch determines whether signals output from

the output jack are passed through the input jack as is

([THRU]), or whether the signal receives DSP process-

ing before input ([DSP OUT]). When this is set to [DSP

OUT], you can set the output signal. For more informa-

tion about signals that can be output, see “ROUTER

Screen” – “e OUTPUT” (page 19).

!1 Vents

A cooling fan is installed on the exhaust side. The fan

will start once the amp exceeds a certain temperature.

Fan speed is controlled based on the temperature of

the amp and power source. When the speaker is in

use, make sure that all of the vents are free from

obstruction.

 Power Section

!2 [AC IN] jack

Connect the supplied AC power cord here. First, con-

nect the power cord to this product, then insert the

power cord plug into the AC outlet. When removing the

power cord, perform this procedure in reverse order.

While the internal power supply functions within the

100V – 240V range, the limiter may not work properly if

a different voltage to that shown is used, since the

maximum output and limiter setting are optimized

according to the voltage used. Do not use a voltage

setting other than that shown.

Insert the power cord fully until it is locked by the

latching lock mechanism (V-Lock).

Press the V-Lock latch to disconnect the power cord.

!3 Power switch

Turns the power supply on [–] or off [ ].

DZR(-D) Series DXS-XLF(-D) Series

WARNING

Use only the supplied power cord/plug.

CAUTION

Be sure to turn the power off before connect-

ing or disconnecting the power cord.

WARNING

A small amount of current flows even when

the power switch is off. If you intend to not

use the speaker for a long time, be sure to

unplug the power cord from the outlet.

• Depending on the timing when the power switch is turned

on/off, it might take up to 15 seconds for the power to turn

on.

• When using multiple devices, we recommend turning each

device on one at a time. If multiple devices are turned on at

the same time, the devices might not start up correctly due

to a voltage drop at the power supply.

NOTE

Functions

 Dante Section

!4 Dante jacks

These are etherCON jacks for connecting with Dante

devices and computers. The two jacks are primary

connectors that can be linked in a daisy chain connec-

tion (see page 29). This connection cannot be used in

a redundant (secondary) network.

!5 [LINK] indicator

Shows the communication status of Dante jacks.

Lights green when an Ethernet cable is connected

correctly to the Dante jack. This indicator will turn off

automatically when BLACKOUT is ON (see page 20).

!6 [1G] indicator

This indicator will light up in orange when the Dante

network is functioning as a Giga-bit Ethernet.

This indicator will turn off automatically when BLACK-

OUT is ON (see page 20).

!7 [SYNC] indicator

Lights steady or flashes green according to the Dante

communication status, as shown in the following table.

This indicator will turn off automatically when BLACK-

OUT is ON (see page 20).

Use STP (Shielded Twisted Pair) cables to prevent electro-

magnetic interference. Make sure that the metal parts of the

plugs are electrically connected to the STP cable shield by

conductive tape or comparable means.

This indicator may flash for 30 seconds when the power is

turned on when connected to a network device.

Dante model

!5!6 !6

NOTE

Steady

Operating normally as a clock

slave on the Dante network

Continuously flashes

Operating normally as a clock

master on the Dante network

Periodically flashes

one time

Incorrect DANTE Fs setting

Periodically flashes

two times

Dante network cable not con-

nected

Periodically flashes

three times

Incorrect Dante network con-

nection

Panel Operations

1. Turn the main knob to select an item. The selected item is highlighted.

The > on the right indicates that there are deeper menu items.

2. Press the main knob to execute a selection.

3. Repeat steps 1 and 2 until you reach the edit parameter screen.

Edit selectable parameters

Turn the main knob to select. The value will be updated and the sound will change

when you press the main knob to execute the change.

Edit continuous parameters

Turn the main knob to change the parameter value. The value is changed in real time

as you turn the knob.

4. For selectable parameters, press the main knob to execute the edited value.

Press the [ ] (Back) key to return to the previous screen (press and hold for at

least one second to return to the HOME screen).

Basic Operations

Main knob

The main knob is used to move the

cursor and adjust parameter val-

ues. Parameters with a broad range

of values can be adjusted more

quickly based on the speed at

which the main knob is turned.

[ ] (Back) key

Press this key to move up one level from the current level, or to

return to the previous screen. Press and hold this button for at

least one second to return to the HOME screen.

Panel Operations

The HOME screen will appear when the power switch is turned on.

Refer to the HOME screen for the model in use.

HOME Screen and Its Functions

 DZR-D series

Dante model

 DXS-XLF-D series

 DZR series

Standard model

 DXS-XLF series

• Even while displaying other than the HOME screen, if you do not operate the panel for 5 minutes, the screen automatically returns to the HOME screen.

• The above screens of the Dante models are examples when setting LABEL of q to "DZR12-D" and "DXS18XLF-D," respectively.

NOTE

Panel Operations

q UNIT ID, LABEL

Shows the UNIT ID and label assigned so that DZR-D or DXS-XLF-D series devices on

the Dante network can be recognized. When the DANTE MODE (page 23) is set to

Quick Config, this will show as “QC,” and the name of the selected TF series output

channel. Go to the DANTE SETUP screen to configure and display Dante settings.

w Input Meter

Shows analog input signal levels. On Dante models this will appear as ANA.

Clipped input signals will light up at the top when clipping occurs.

e Input Meter (DNT)

Shows digital input signal (Dante) levels. Clipped input signals will light up at the top

when clipping occurs.

r MASTER Level

Sets and displays output levels. (Unit: dB)

t SP Output Meter

Shows output levels. Sigma () clipping at the top will light up when clipping occurs

within a channel.

y Protection (THERMAL, MUTED)

Appears when safeguard functions have been activated. “THERMAL” is shown when a

high temperature is detected in the amplifier, and output levels are reduced. If operat-

ing conditions further deteriorate, this will change to “MUTED,” and the output signal

will be muted.

u PRESET

Shows the preset number and title of the set preset. This enables you to save, load and

change audio settings. (E symbol) will appear when parameters have been

changed.

i HPF

Sets and displays the high-pass filter frequency.

LPF

Sets and displays the low-pass filter frequency and the POLARITY. An indication Ø will

appear when POLARITY is set to INVERTED.

o D-CONTOUR

Sets and display the D-CONTOUR mode.

D-XSUB

Sets and displays the D-XSUB mode.

!0 EQ

Shows whether the equalizer (6 Band EQ) is on or off. You can configure EQ settings

while checking the frequency response characteristics.

!1 DELAY

Sets and displays the delay.

!2 CARDIOID

Sets and displays the cardioid mode.

!3 ROUTER

Configures the routing of the audio signal.

!4 UTILITY

Sets and displays the device operating settings.

• PANEL SETUP: Sets the brightness and contrast of the display, and automatic turn

off settings for the display and indicators.

• PANEL LOCK: Configures panel lock settings, and saves and loads PIN codes.

• DEVICE BACKUP: Saves and loads settings data.

• DANTE SETUP : Sets and displays Dante-related settings.

• NETWORK : Sets and displays network-related settings.

• DEVICE INFORMATION: Shows device status, and device-specific information.

• INITIALIZE: Resets to the default settings.

• LOG: Shows recorded logs and saves logs to a USB flash drive.

• UPDATE FIRMWARE: Updates the firmware for the device, and the Dante module.

Dante model

Full range

Subwoofer

Full range

Subwoofer

Dante model

Panel Operations

When an error occurs, an alert message will appear on the display.

For more details on each error message and notification, see the “Message List”

(page37).

You can reset to the default settings for this product in the following two ways.

 Initializing to the default settings by navigating from the HOME

screen and selecting UTILITY → INITIALIZE

(See page 26.)

 Initializing to the default settings when you have forgotten your

PIN code, etc.

Use the following method to reset to the default settings if you are unable to select INI-

TIALIZE on the UTILITY screen because of a forgotten PIN code, etc.

1. Disconnect all the cables except the power cord.

2. Turn the power switch off.

3. After the [POWER] indicator turns off, turn the power switch back on.

4. While pressing and holding the main knob, turn the main knob at least five clicks

in a counter-clockwise direction within two seconds of the [POWER] indicator

light coming on. (Keep pressing and holding the main knob.)

If the procedure is not finished properly in time, the model name logo will appear. In

this case, repeat the procedure again from step 2.

5. When the [POWER] indicator starts flashing and the screen shown below

appears, release the main knob.

6. Press the main knob.

This product will be restarted automatically.

7. Wait until the HOME screen appears.

WARNING

A sudden loud sound might occur when initializing is completed, if an audio

signal is present.

Alert Messages

E.g.)

Initialization

To cancel the initialization process at this point, turn the power switch off.

NOTICE

Turning the power switch off before the HOME screen appears could cause a malfunction.

NOTE

Screen Functions

Turn the main knob to move the cursor to the desired menu item and select it to move to

the corresponding screen.

As presets which is sound related setting, allows you to recall/store/clear the settings, edit

titles, and set the protection of the settings. The recall-only presets are always protected.

An (E symbol) (page 11) will appear on the HOME screen when parameters have

been changed.

q INITIAL DATA

Resets to the default settings. Recall only.

w Factory presets

When using DZR and DXS-XLF series models in combination with one another, you

can optimize the crossover frequency, levels and delay by loading presets for each

model name. Recall only.

e User preset list

Save up to eight settings. It allows you to recall/store/clear the settings, edit titles, and

set protection for the settings.

Screen Structure

To the EQ screen (page 16)

To the DELAY screen (page 16)

To the CARDIOID screen

(page 17)

To the ROUTER screen (page 18)

To the UTILITY screen (page 19)

Subwoofer

To the DANTE SETUP screen

(page 23)

Dante model

To the PRESET screen (page 13)

To the HPF screen (page 15)

To the LPF screen (page 15)

Full range

Subwoofer

To the D-CONTOUR screen

(page 15)

To the D-XSUB screen

(page 16)

Full range

Subwoofer

The presets are equipped assuming that one DZR and one DXS-XLF having the same signal

routes are set up. When analog inputs are used together with Dante inputs, or when several DZR

and DXS-XLF are set up, each setting must be adjusted manually.

PRESET Screen

(factory default settings)

Full range

(factory default settings)

Subwoofer

Key mark :

Indicates a protected pre-

set

: Indicates the currently

selected preset

NOTE

Screen Functions

Turn the main knob to select the preset, and press the main knob to execute it. A screen

showing a list of possible actions will appear.

 RECALL

Loads a saved preset.

The preset number and title of the preset selected will appear.

 STORE

Adds a title to the current setting configurations and stores it to a preset.

Turn the main knob to select the position to enter text, and then press the main knob to

enter text input mode. When in text input mode, turn the main knob to select the character

you wish to enter, and then press the main knob to enter the character.

Move the cursor to BS and press the main knob to delete the last character entered.

When in text input mode, press the [ ] (Back) key to resume position selection. During

position selection, select OK to execute the title, or CANCEL to cancel the text entry.

Note that protected presets cannot be overwritten.

 CLEAR

Deletes a stored preset.

Note that protected presets, and the currently selected preset cannot be deleted.

 TITLE

Edits the title of a stored preset.

Turn the main knob to select the position to edit text, and then press the main knob to

enter text input mode. When in text input mode, turn the main knob to select the character

you wish to enter, and then press the main knob to enter the character.

Move the cursor to BS and press the main knob to delete the last character entered.

When in text input mode, press the [ ] (Back) key to resume position selection. During

position selection, select OK to execute the title, or CANCEL to cancel the title changes.

Note that titles of protected presets cannot be edited.

E.g.) The selected preset title:

PRESET1

E.g.) Title: PRESET1

Cursor during position selection Cursor during character selection

Screen Functions

 PROTECT

Turns protected for a stored preset on/off.

Set this to ON to prevent presets from being overwritten (STORE), deleted (CLEAR) or

preset title changes (TITLE). A key mark (page 13) will appear on the left side of the pre-

set title on the PRESET screen.

Sets the HPF (high-pass filter) cutoff frequency.

Select OFF or set a specific frequency.

Sets the LPF (low-pass filter) cutoff frequency and the polarity.

q LPF

Select the LPF cutoff frequency.

w POLARITY

Select the polarity. When set to INVERTED, a Ø symbol will appear on the HOME

screen.

Switches a D-CONTOUR preset.

Set to the optimal frequency response characteristics according to the application.

• OFF (NORMAL): Turns D-CONTOUR off. This is a general-purpose frequency response

characteristic setting.

• FOH/MAIN: Boosts the high and low frequency components so that the frequency

response characteristic is suitable for main speaker use. The boost amount is automati-

cally adjusted to provide well-balanced, clear audio based on the volume.

• MONITOR: Reduces the low frequency range, which could otherwise tend to be boomy

if the speaker is set directly on the floor, providing vital clarity when using as a floor mon-

itor. This reduces latency and changes the phase characteristics.

Be aware that using RESTORE FROM USB (page 23, “ DEVICE BACKUP” w) will overwrite presets

even if they are protected.

NOTE

HPF Screen

Full range

LPF Screen

Subwoofer

D-CONTOUR Screen

Full range

Screen Functions

Switches a D-XSUB preset.

Set to the optimal frequency response characteristics according to the application and

genre of music.

• OFF (NORMAL): Turns D-XSUB off. This is a general-purpose frequency response

characteristic setting.

• BOOST: Boosts the frequency band accentuating a sense of punch in the audio.

• XTEND LF (extended LF): Extends playback frequencies to cover lower frequencies.

Adjusts the frequency response characteristics for all speakers. Adjust the 6 Band EQ

parameters to your liking as well the intended application.

q ON/OFF

Turns the 6 Band EQ on/off. When off, only the outline of EQ characteristics will be

shown on the display.

w FLAT

Sets the amount of gain on all bands to 0 dB.

e Bands A – F

Select the desired band whose parameters you wish to check. Press the main knob on

the selected band to have the cursor move to the parameter display.

r Parameter Display

Shows the parameters of each band. Move the cursor to a parameter name and press

the main knob to start setting parameter values. Press the [ ] (Back) key to return

the cursor to the parameter name. Press the [ ] (Back) key again to return to the

band selection screen.

Sets the delay time. This is used to compensate for the distance between speakers, etc.

Set this by time or distance.

q ON/OFF

Turns the delay on/off.

w TIME [ms]

Sets the delay time in milliseconds.

e DISTANCE [m, ft]

Sets the delay time by physical distance (in meters or in feet).

D-XSUB Screen

Subwoofer

EQ Screen

The three delay time indications change in conjunction. The last edited unit will appear on the

HOME screen.

DELAY Screen

NOTE

Screen Functions

Sets the cardioid mode.

Change settings based on the number of speakers in use and their orientation. Set this to

OMNI (FRONT) when not using the cardioid mode.

 Screen when two subwoofers are placed side by side

 Screen when three subwoofers are placed side by side

For more information about setting up cardioid mode, see the Owner’s Manual.

CARDIOID Screen

Subwoofer

NOTE

From the mixer

To the full-range

speakers

Stage

Audience

From the mixer

Stage

Audience

Screen Functions

Sets routing, Dante input levels, analog output levels and output levels to a Dante net-

work.

q Routing

Configure the routing of the audio signal.

Check the input source (INPUT) and output destination (OUTPUT), and set at

the intersecting points. By default, signals from all input jacks will be output from the

speakers. Routing cannot be performed for shaded areas on the screen.

w INPUT

Sets two Dante input levels, sensitivity and the degree of delay compensation.

• DNT. IN1 LVL: Sets Dante input level D1. It can be set in 0.5 dB increments.

• DNT. IN2 LVL: Sets Dante input level D2. It can be set in 0.5 dB increments.

• DNT. SENS. (DANTE SENSITIVITY): Sets the input sensitivity for the digital signal

sent from the Dante network to the amplifier. The input sensitivity set acts as the clip

level for the speakers. Set this to either -14 dBFS (default setting) or -6 dBFS. When

the [LEVEL] control is in the center position (0 dB), set this to -14 dBFS to ensure

proper balance with the input level from the Dante network and the analog input level

from devices having a maximum output of +24 dBu (which include many of Yamaha

digital mixers). Make fine adjustment with DNT. IN1 LVL/ DNT. IN2 LVL.

• ALIGNMENT (DELAY ALIGNMENT): Set this to ON, and set a delay here to com-

pensate for the time lag between the analog input and the Dante input. Note that the

appropriate delay setting will vary depending on the Dante settings configured and

the combination of connected devices. As the Dante input typically lags behind, this

delay setting will apply to the analog input. When you set the ALIGNMENT, refer to

the “Route Latency Values” (page44).

• On Dante models, the analog signal sent to the DZR-D or DXS-XLF-D can be output to the Dante

network and set as the input source for the mixer.

* Dante output settings are supported by firmware V1.2.2 or later and Dante module firmware

4.1.6.7-4.1.6.5-1.1.0 or later.

• For more information about the signal flow in routing, see the “Block Diagram” (page52).

ROUTER Screen

NOTE

 DZR-D series

Dante model

 DXS-XLF-D series

 DZR series

Standard model

 DXS-XLF series

Dante model

Screen Functions

e OUTPUT

Sets the output level. Output levels can be set in 0.5 dB increments.

• ANA. OUT1 LVL: Sets analog output level A1 (page 7 o, channel 1 output level).

• ANA. OUT2 LVL: Sets analog output level A2 (page 7 o, channel 2 output level).

• DNT. OUT1 LVL: Sets Dante output level D1.

• DNT. OUT2 LVL: Sets Dante output level D2.

The UTILITY screen is used to configure device settings, and save and load settings data

to and from a USB flash drive.

 PANEL SETUP

Sets the rear panel display method.

q BRIGHTNESS

Sets the brightness of the back light of the display.

This setting can be set in 10 steps from 1 to 10.

 DZR-D series

Dante model

 DXS-XLF-D series

 DZR series

Standard model

 DXS-XLF series

UTILITY Screen

Dante model Standard model

Screen after scrolling

downwards

Screen after scrolling

downwards

Screen Functions

w CONTRAST

Sets the contrast of the display.

This setting can be set in 16 steps from 1 to 16. Configure your display according to

the operating environment so that it is easy to see. A higher contrast is recommended

when viewing the display from above, such as with a subwoofer. Note, however, that

setting the contrast too high may make the display harder to see directly from the front.

e BLACKOUT

The BLACKOUT setting is used to automatically turn the display and indicators off

when the panel is not in use.

Turn this on to have the display and indicators automatically turn off as follows.

• After five seconds of panel inactivity: The display darkens slightly.

• After 15 seconds of panel inactivity: The display/indicators except the [POWER]

indicator will turn off (see the table below).

Either press a key on the rear panel or press the main knob to wake the display/turn on

the indicators.

 PANEL LOCK

Locks the operating panel to prevent inadvertent operating errors.

When doing so, users will be able to set a four-digit PIN code identifying the user. Also,

the PIN code can be saved to and loaded from a USB flash drive.

q PANEL LOCK

Sets the panel lock.

• OFF: Panel lock is off.

• PARTIAL : Locks off operations appearing on the display panel. MASTER Level set-

tings can still be configured.

• ALL: Disables all actions except to remove the panel lock.

w PIN CODE

Sets a PIN code (any four digits) for the panel lock.

Once a PIN code has been set, the PIN code must be entered to release the panel

lock.

Display/indicator Automatically turns off when BLACKOUT is on

[POWER] indicator (page 6 e) Does not automatically turn off

Display (page 6 r) Off

[LIMIT] indicator (page 6 w) Off

[LINK] indicator (page 8 !5) Off

[1G] indicator (page 8 !6) Off

[SYNC] indicator (page 8 !7) Off

• The [POWER] indicator will always remain on, even when the BLACKOUT setting is turned on.

• The display will darken after one minute of panel inactivity and turn off after 25 minutes of inac-

tivity to protect the display, even if the BLACKOUT setting is off.

NOTE

• For more information on releasing the panel lock, see “Removing a Panel Lock” (page 22).

• If a PIN code has been set, the PIN code must be entered even when the setting of the panel

lock is changed from OFF to PARTIAL or ALL.

• If you have forgotten the PIN code, you can still release the panel lock by initializing this prod-

uct. See “Initializing to the default settings when you have forgotten your PIN code, etc.”

(page 12).

• The default PIN code setting is 0000. You will not be required to enter the PIN code to release

the panel lock when the PIN code is set to 0000.

NOTE

Strona się ładuje...

Yamaha DXS15XLF Instrukcja obsługi

Marka: Yamaha

Model: DXS15XLF

Typ: Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Pobierz PDF

raport

w innych językach

čeština: Yamaha DXS15XLF Uživatelský manuál
español: Yamaha DXS15XLF Manual de usuario
italiano: Yamaha DXS15XLF Manuale utente
Deutsch: Yamaha DXS15XLF Benutzerhandbuch
português: Yamaha DXS15XLF Manual do usuário
français: Yamaha DXS15XLF Manuel utilisateur
English: Yamaha DXS15XLF User manual
dansk: Yamaha DXS15XLF Brugermanual
Nederlands: Yamaha DXS15XLF Handleiding
română: Yamaha DXS15XLF Manual de utilizare

Yamaha DXS15XLF Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Yamaha DXS15XLF Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty