Dell PowerEdge 300 Skrócona instrukcja obsługi

Dell™ PowerEdge™

R300 Systems

Getting Started

With Your System

Začínáme se systémem

Guide de mise en route

Erste Schritte mit dem System

Τα πρώτα βήµατα µε το σύστηµά σας

Rozpoczęcie pracy z systemem

Начало работы с системой

Procedimientos iniciales con el sistema

תכרעמה ע הדובעה תליחת

Dell™ PowerEdge™

R300 Systems

Getting Started

With Your System

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of

your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data

and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury,

or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly

forbidden.

Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.; Intel,

Pentium, Celeron and Xeon are registered trademarks and Core is a trademark of Intel Corporation

in the U.S. and other countries; Microsoft, Windows, and Windows Server are either tradcmarks or

registered trademarks of Microsoft Corporation in the United States and/or other countries; Red Hat

and Enterprise Linux are registered trademarks of Red Hat Inc.; SUSE is a registered trademark

of Novell Inc..

Other trademarks and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Model SMT

December 2007 P/N HR210 Rev. A00

Getting Started With Your System 3

System Features

The major hardware and software features of your system include:

• 1U/1S rack-mountable chassis with support for static rails and sliding rails.

NOTE: Use the System Setup program to view processor information. See

"Using the System Setup Program" in your Hardware Owner’s Manual.

• One of the following processors:

– Single Core Intel

®

Celeron

®

445 Processor

– Dual-Core Intel Core™2 Duo E6305 or E6405 Processor

– Quad-Core Intel Xeon

®

X3323, X3353, or X3363 Processor

• A minimum of 512-MB single or dual-ranked registered 667-MHz DDR2

memory modules with ECC, upgradeable to a maximum of 24-GB by

installing combinations of 512-MB, 1-GB, 2-GB, or 4-GB memory modules

in six memory module sockets on the system board.

• One of the following riser card options:

– Two riser cards (left and center risers), each providing a x8 lane width

PCI-Express expansion slot.

OR

– One riser card (center riser), providing a x8 lane width PCI-Express

expansion slot.

– One riser card (left riser) providing a 3.3 V, 64-bit 133MHz PCI-X

expansion slot.

• One 12.7 mm DVD, or combination CD-RW/DVD in a device drive bay.

• Support for the following internal hard-drive configurations:

– Up to two 3.5-inch, internal, SATA hard drives with the optional SAS

controller card (hot-plug option available).

– Up to two 3.5-inch, internal, Serial-Attached SCSI (SAS) hard drives

with an optional SAS controller card (hot-plug option available).

4 Getting Started With Your System

• Optional remote access controller for remote systems management, which

is installed on the dedicated slot on the system board.

• Optional USB flash drive emulates a diskette drive or hard drive.

• One 400-W power supply (optional redundant power supply available).

• Two integrated Gigabit Ethernet network adapters, capable of supporting

10-Mbps, 100-Mbps, and 1000-Mbps data rates with support for Wake-

on-LAN.

• A Dell Remote Access Controller Card (DRAC5), which provides remote

system management, crashed system recovery, and power control functions

for Dell PowerEdge

.

•

An integrated VGA-compatible video subsystem with an ATI ES1000,

33-MHz PCI video controller. This video subsystem contains a

minimum of 32MB of graphics memory with support for 2D graphics.

Maximum resolution is 1600 x 1200 with 65,536 colors; true-color

graphics are supported in the following resolutions: 640 x 480, 800 x 600,

1024 x 768, 1280 x 1024. When the optional remote access card is

installed, the maximum video resolution is 1280 x 1024

.

• Fan modules, each of which is comprised of two dual-rotor fans positioned

in front of the processor and memory.

• Fan modules, comprised of two dual-rotor fans positioned in front of the

PSU. These fans are used for the two redundant PSUs (hot-plug hard

drives and redundant PSU configuration).

• Serial connector for console redirection support.

• Security features, including chassis-intrusion detection and keylock

on the optional bezel.

• An integrated Trusted Platform Module (TPM) version 1.2 used for

security applications, capable of generating and storing keys, and storing

passwords and digital certifications. (Not available in China.)

Getting Started With Your System 5

• Systems management software/circuitry that monitors critical system

voltages and temperatures.

• Back-panel connectors include video, serial, two USB, and two network

adapter connectors.

• Front-panel connectors include one VGA and two USB connectors.

• One internal USB connector is included for a bootable memory key.

• Front-panel 1x5 LCD for system ID and error messaging.

For more information about specific features, see “Technical Specifications”

on page 11.

The following software is included with your system:

• A System Setup program for viewing and changing system configuration

information. For more information, see “Using the System Setup Program”

in the

Hardware Owner’s Manual

.

• Enhanced security features, including a system and setup passwords are

available through the System Setup program.

• Video drivers for displaying programs in high-resolution modes.

Systems management software and documentation CDs.

Supported Operating Systems

• Microsoft

®

Windows Server

®

2008 Web, Standard, and Enterprise

(32-bit x86) Editions (

when available

)

• Microsoft Windows Server 2008 Web, Standard, Small Business Server

(Premium and Standard), and Enterprise (x64) Editions (

when available

)

• Microsoft Windows Server 2003 Web, Standard, Small Business Server

(Premium and Standard), and Enterprise (32-bit x86) Editions

(SP1 and SP2)

• Microsoft Windows Server 2003 Standard and Enterprise (x64) Editions

• Microsoft Windows Server 2003 R2 Standard, Small Business Server

(Premium and Standard), and Enterprise (32-bit x86) Editions

6 Getting Started With Your System

• Microsoft Windows Server 2003 R2 Standard and Enterprise (x64)

Editions

•Red Hat

®

Enterprise Linux

®

ES (versions 4 and 5) (x86_32)

• Red Hat Enterprise Linux ES (versions 4 and 5) (x86_64)

•SUSE

®

Linux Enterprise Server 9 (SP4 or later) (x86_64)

• SUSE Linux Enterprise Server 10 (x86_64)

NOTE: For the latest information on supported operating systems,

see www.dell.com.

Other Information You May Need

CAUTION: The Product Information Guide provides important safety and

regulatory information. Warranty information may be included within this

document or as a separate document.

•The

Rack Installation Guide

or

Rack Installation Instructions

included

with your rack solution describes how to install your system into a rack.

•The

Getting Started Guide

provides an overview of system features,

setting up your system, and technical specifications.

•The

Hardware Owner’s Manual

provides information about system

features and describes how to troubleshoot the system and install

or replace system components.

• CDs included with your system provide documentation and tools

for configuring and managing your system.

• Systems management software documentation describes the features,

requirements, installation, and basic operation of the software.

• Operating system documentation describes how to install (if necessary),

configure, and use the operating system software.

• Documentation for any components you purchased separately provides

information to configure and install these options.

Getting Started With Your System 7

• Updates are sometimes included with the system to describe changes

to the system, software, and/or documentation.

NOTE: Always check for updates on support.dell.com and read the updates

first because they often supersede information in other documents.

• Release notes or readme files may be included to provide last-minute

updates to the system or documentation or advanced technical reference

material intended for experienced users or technicians.

Obtaining Technical Assistance

If you do not understand a procedure in this guide or if the system does not

perform as expected, see your Hardware Owner’s Manual.

Dell Enterprise Training and Certification is available; see

www.dell.com/training for more information. This service may not be offered

in all locations.

Installation and Configuration

CAUTION: Before performing the following procedure, read and follow the safety

instructions and important regulatory information in your Product Information

Guide.

CAUTION: Whenever you need to lift the system, get others to assist you. To avoid

injury, do not attempt to lift the system by yourself.

This section describes the steps to set up your system for the first time.

Unpacking the System

Unpack your system and identify each item. Keep all shipping materials in

case you need them later.

8 Getting Started With Your System

Installing the Rail and System in a Rack

Install the system in the rack once you have read the “Safety Instructions”

located in the rack installation documentation for your system.

See your rack installation documentation for instructions on installing your

system in a rack. For power and cooling guidelines, see the rack capacity

planner tool on www.dell.com.

Connecting the Keyboard, Mouse, and Monitor

Connect the keyboard, mouse, and monitor (optional).

The connectors on the back of your system have icons indicating which cable

to plug into each connector. Be sure to tighten the screws (if any) on the

monitor's cable connector.

Getting Started With Your System 9

Connecting the Power

Connect the system’s power cable(s) to the system (a redundant system is

shown in the illustration). For redundant systems, secure the cables with the

two Velcro straps that ship with your system, as shown. For non-redundant

systems, attach the power cord retention bracket that ships with your system.

Plug the other end of the cable into a grounded electrical outlet or a separate

power source such as an uninterrupted power supply (UPS) or a power

distribution unit (PDU).

Turning on the System

Turn on the system and monitor (optional).

10 Getting Started With Your System

Press the power button on the system and the monitor. The power indicators

should light. Adjust the monitor’s controls until the displayed image is

satisfactory.

Installing the Bezel

Install the bezel (optional).

Complete the 0perating System Setup

If you purchased a preinstalled operating system, see the operating system

documentation that ships with your system. To install an operating system for

the first time, see the Quick Installation Guide. Be sure the operating system

is installed before installing hardware or software not purchased with the

system.

Getting Started With Your System 11

Technical Specifications

Processor

Processor type Single Core Intel

®

Celeron

®

445 processor

or

Dual-Core Intel Core

™

2 Duo E6305 or E6405

sequence processor

or

Quad-Core Intel Xeon

®

X3323, X3353, or X3363

serial processor

Expansion Buses

Bus type PCI-X, PCIe

Expansion slots – Two optional riser cards

Riser 1

PCIe Center Riser

One full-height, half-length, x8 lane PCIe slot

PCIe Left Riser

One full-height, half-length, x8 lane PCIe slot

Riser 2

PCI-X Left Riser

One full-height, half-length,

64-bit, 133MHz PCI-X slot

PCIe Center Riser

One full-height, half-length, x8 lane PCIe slot

Memory

Architecture Up to six registered DDR2 677 MHz RDRAM

memory modules with ECC

Memory module sockets Six 240-pin

Memory module capacities 512 MB, 1 GB, 2 GB, 4GB

Minimum RAM 512 MB (one 512-MB module)

Maximum RAM 24 GB

12 Getting Started With Your System

Drives

Hard Drives

SATA

Up to two 3.5-inch, internal

(optional for hot-plug)

SAS

Up to two 3.5-inch, internal with optional SAS

controller card (optional for hot-plug)

CD/DVD drive One optional DVD, or combination

CD-RW/DVD in a device drive bay

NOTE: DVD devices are data only.

USB flash drive One optional drive that emulates a diskette drive

or hard drive

Connectors

Externally accessible

Back

Network adapter

Two RJ-45 (for integrated 1-Gigabit network

adapters)

Serial

9 pin

USB

Two 4-pin, USB 2.0 compliant

Video

15-pin VGA

Front

Video

15-pin VGA

USB

Two 4-pin, USB 2.0 compliant

Internally accessible

SATA channels

Three 7-pin

USB key (for memory key)

one 4-pin, USB 2.0-compliant

Getting Started With Your System 13

Video

Video type Integrated ATI ES1000 VGA controller

Video memory 32 MB (Min)-64 MB (Max) DDR II

Power

AC power supply

Wattage

400 W redundant PSU for hot-plug hard

drives plus redundant PSU configuration

(maximum configuration)

Voltage

100–240 VAC, 50/60 Hz

Maximum inrush current

Under typical line conditions and over

the entire system ambient operating range,

the inrush current may reach 25 A for 10 ms

or less

System battery CR 2032 3.0-V lithium coin cell

Physical

Height 4.2 cm (1.67 in)

Width 42.6 cm (16.78 in)

Depth

With optional bezel

69.3 cm (27.29 in)

Without optional bezel

66 cm (26 in)

Weight (maximum

configuration Kg)

13.45 kg (29.6 lb)

14 Getting Started With Your System

Environmental

NOTE: For additional information about environmental measurements for specific

system configurations, see www.dell.com/environmental_datasheets.

Temperature

Operating

10° to 35°C (50° to 95°F)

Storage

–40° to 65°C (–40° to 149°F)

Relative humidity

Operating

20% to 80% (noncondensing) with a maximum

humidity gradation of 10% per hour

Storage

5% to 95% (noncondensing)

Maximum vibration

Operating

0.26 Grms at 5–350 Hz for 15 min

Storage

1.54 Grms at 10–250 Hz for 15 min

Maximum shock

Operating

One shock pulse in the positive z axis (one pulse

on each side of the system) of 31 G for up to

2.6 ms

Storage

Six consecutively executed shock pulses in the

positive and negative x, y, and z axes (one pulse

on each side of the system) of 71 G for up to 2 ms

Altitude

Operating

–16 to 3,048 m (–50 to 10,000 ft)

NOTE: For altitudes above 2,950 feet, the maximum

operating temperature is derated 1°F/550 ft.

Storage

–16 to 10,600 m (–50 to 35,000 ft)

Airborne Contaminant Level

Class

G2 or lower as defined by ISA-S71.04-1985

Dell™ PowerEdge™

Systémy R300

Začínáme

se systémem

Poznámky, upozornění a varování

POZNÁMKA: POZNÁMKA označuje důležitou informaci, s jejíž pomocí

lépe využijete svůj počítač.

UPOZORNĚNÍ: UPOZORNĚNÍ poukazuje na možnost poškození

hardwaru nebo ztráty dat a poskytuje návod, jak se danému problému

vyhnout.

POZOR: VAROVÁNÍ označuje hrozící nebezpečí poškození majetku,

poranění nebo usmrcení osob.

____________________

Informace obsažené v tomto dokumentu podléhají změnám bez předchozího upozornění.

Reprodukce jakýmkoli způsobem bez písemného povolení společnosti Dell Inc. je přísně zakázána.

Ochranné známky použité v tomto textu: Dell, logo DELL a PowerEdge jsou ochranné

známky společnosti Dell Inc. Intel, Pentium, Celeron a Xeon jsou registrované ochranné známky

a Core je ochranná známka společnosti Intel Corporation v USA a dalších zemích. Microsoft,

Windows a Windows Server jsou ochranné známky nebo registrované ochranné známky společnosti

Microsoft Corporation v USA a dalších zemích. Red Hat a Enterprise Linux jsou registrované ochranné

známky společnosti Red Hat Inc. SUSE je registrovaná ochranná známka společnosti Novell Inc.

V tomto dokumentu mohou být použity další ochranné známky a obchodní názvy buď s odkazem na

právnické osoby a organizace, které uplatňují na dané ochranné známky a obchodní názvy nárok, nebo

s odkazem na jejich výrobky. Společnost Dell Inc. nemá vlastnické zájmy vůči ochranným známkám

a obchodním názvům jiným než svým vlastním.

Model SMT

Prosinec 2007 P/N HR210 Rev. A00

Začínáme se systémem 17

Systémové funkce

Hlavní hardwarové a softwarové funkce systému jsou:

•

Šasi pro montáž do stojanu 1U/1S s podporou pevných a výsuvných

kolejniček.

POZNÁMKA: K zobrazení informací o procesoru použijte program

nastavení systému. Další informace najdete v části Použití programu

nastavení systému v Příručce majitele hardwaru.

•

Jeden z následujících procesorů:

–

Procesor Intel

®

Celeron

®

445

–

Dvoujádrový procesor Intel Core™2 Duo E6305 nebo E6405

–

Čtyřjádrový procesor Intel Xeon

®

X3323, X3353 nebo X3363

•

Minimálně 512 MB paměti sestávající z jednoduchých nebo duálních

registrovaných paměťových modulů DDR2 o frekvenci 667 MHz

s ochranou ECC. Paměť lze rozšířit maximálně na 24 GB instalací

příslušných kombinací paměťových modulů o kapacitě 512 MB,

1 GB, 2 GB nebo 4 GB do šesti slotů na systémové desce.

•

Jedna z následujících možností zvedacích karet:

–

Dvě zvedací karty (levá a střední), každá poskytující osmilinkový

(x8 lane) rozšiřovací slot PCI-Express.

NEBO

–

Jedna zvedací karta (střední) poskytující osmilinkový (x8 lane)

rozšiřovací slot PCI-Express.

–

Jedna zvedací karta (levá) poskytující rozšiřovací slot PCI-X, 3,3 V,

64 bitů, 133 MHz.

•

Jedna jednotka DVD nebo kombinovaná jednotka CD-RW/DVD o výšce

12,7 mm v pozici pro jednotky.

18 Začínáme se systémem

•

Podpora následujících konfigurací interních pevných disků:

–

Až dva 3,5palcové interní pevné disky SATA s volitelnou kartou

řadiče SAS (k dispozici je možnost připojení za provozu).

–

Až dva 3,5palcové interní pevné disky SAS (Serial-Attached SCSI)

s volitelnou kartou řadiče SAS (k dispozici je možnost připojení za

provozu).

•

Volitelný ovladač pro vzdálený přístup umožňující vzdálenou správu

systému, který je instalován do vyhrazeného slotu na systémové desce.

•

Volitelná jednotka USB flash emuluje disketovou jednotku nebo pevný disk.

•

Jeden napájecí zdroj 400 W (k dispozici je volitelný záložní napájecí zdroj).

•

Dvě integrované síťové karty Gigabit Ethernet podporující datové přenosy

rychlostí 10 Mb/s, 100 Mb/s a 1000 Mb/s a funkci Wake-on-LAN.

•

Karta ovladače pro vzdálený přístup (DRAC5), která pro počítač Dell

PowerEdge poskytuje vzdálenou správu systému, obnovení havarovaného

systému a funkce řízení napájení

.

• Integrovaný grafický subsystém VGA s grafickou kartou ATI ES1000,

33 MHz PCI. Tento grafický subsystém disponuje minimálně 32 MB

grafické paměti a podporuje zobrazení 2D. Maximální rozlišení je

1600 x 1200 s 65 536 barvami. Zobrazení true color je podporováno

v následujících rozlišeních: 640 x 480, 800 x 600, 1024 x 768

a 1280 x 1024. Je-li nainstalována volitelná karta ovladače pro

vzdálený přístup, je maximální grafické rozlišení 1280 x 1024.

•

Ventilátorové moduly sestávající ze dvou ventilátorů s duálním rotorem

umístěné před procesorem a pamětí.

•

Ventilátorové moduly sestávající ze dvou ventilátorů s duálním rotorem

umístěné před napájecím zdrojem. Tyto ventilátory se používají pro dva

záložní napájecí zdroje (v konfiguracích s pevnými disky připojitelnými

za provozu a záložními napájecími zdroji).

•

Sériový konektor pro podporu přesměrování na konzolu.

•

Zabezpečovací funkce včetně detekce vniknutí do šasi a zámku na volitelném

čelním krytu.

Strona jest ładowana ...

Dell PowerEdge 300 Skrócona instrukcja obsługi

Dell PowerEdge 300 Skrócona instrukcja obsługi

w innych językach

Powiązane dokumenty