Fender PT-100 Pedal Tuner Instrukcja obsługi
- Kategoria
- Akcesoria gitarowe
- Typ
- Instrukcja obsługi
PT-100
PT-100
PP
PP
EE
EE
DD
DD
AA
AA
LL
LL
TT
TT
UU
UU
NN
NN
EE
EE
RR
RR
Owner’s Manual
Owner’s Manual
1. POWER - Switches the PT-100 on-off as
indicated by the LED above.
2. NOTE DISPLAY - Indicates the note closest to
the note played.
3. TUNING LEDs - These nine LEDs indicate the
degree of flatness or sharpness of the played
note compared to the displayed note. The center
“0” LED lights when the played note is “in tune.”
4. INPUT - Plug your guitar in here.
5. OUT 1 and OUT 2 - Connect either of these
output jacks to your amplifier input: OUT 1 is
always active. OUT 2 is disabled when the PT-
100 is switched on, useful for silent guitar tuning.
6. DC 9V INPUT - Connection for the optional AC
power adapter. Connect the adapter to a
grounded AC outlet in accordance with the
frequency and voltage ratings specified on the
adapter.
7. BATTERY LED - Replace the 9V battery when
this LED flashes. Open the battery compartment
on the back of the unit by rotating the large
slotted screw counterclockwise.
FF
FF
ee
ee
aa
aa
tt
tt
uu
uu
rr
rr
ee
ee
ss
ss
wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORPORATION, CORONA, CA USA
Fender
®
is a registered trademark of FMIC. © 2004 FMIC. All rights reserved.
v.040818
SS
SS
pp
pp
ee
ee
cc
cc
ii
ii
ff
ff
ii
ii
cc
cc
aa
aa
tt
tt
ii
ii
oo
oo
nn
nn
ss
ss
II
II
mm
mm
pp
pp
oo
oo
rr
rr
tt
tt
aa
aa
nn
nn
tt
tt
SS
SS
aa
aa
ff
ff
ee
ee
tt
tt
yy
yy
II
II
nn
nn
ss
ss
tt
tt
rr
rr
uu
uu
cc
cc
tt
tt
ii
ii
oo
oo
nn
nn
ss
ss
TYPE: PR 388
PART NUMBER: 023-9994-000
BATTERY: 9V
SCALE: 12 note equal temperament
RANGE: G0 (24.49Hz)–B8 (7902.12Hz)
PRECISION: ±1 cent
DIMENSIONS: Height: 42mm Width: 78mm Depth: 129mm
WEIGHT: 485g
Product specifications are subject to change without notice.
This symbol warns the user of dangerous voltage levels localized
within the enclosure.
This symbol advises the user to read all accompanying literature for
safe operation of the unit.
∆ Read, retain, and follow all instructions. Heed all warnings.
∆ CAUTION: No user serviceable parts inside, refer servicing to qualified
personnel only.
∆ WARNING: To prevent damage, fire or shock hazard, do not expose this unit
to rain or moisture.
∆ Do not drip nor splash liquids, nor place liquid filled containers on the unit.
∆ WARNING: The unit must only be connected to a safety agency certified
power source (adapter), approved for use and compliant with applicable local
and national regulatory safety requirements.
∆ Hazardous voltages may be present within the cabinet even when the power
switch is off and the power cord is connected. Therefore, disconnect the
power cord from the rear panel power inlet before servicing. The power inlet
must remain readily operable.
∆ This product should be located away from heat sources such as radiators,
heat registers, or other products that produce heat.
∆ This product should be serviced by qualified service personnel when: the
power supply cord or the plug has been damaged; or objects have fallen, or
liquid has been spilled onto the product; or the product has been exposed to
rain; or the product does not appear to operate normally or exhibits a marked
change in performance; or the product has been dropped, or the enclosure
damaged.
∆ This product may be equipped with a polarized plug (one blade wider than
the other). This is a safety feature. If you are unable to insert the plug into
the outlet, contact an electrician to replace your obsolete outlet. Do not
defeat the safety purpose of this plug.
∆ Only connect the power supply cord to an earth grounded AC receptacle in
accordance with the voltage and frequency ratings specified on the unit or
the adapter.
∆ Protect the power supply cord from being pinched or abraded.
∆ The power supply cord of this product should be unplugged from the outlet
when left unused for a long period of time, or during electrical storms.
∆ Unplug the power supply cord before cleaning the unit exterior (use a damp
cloth only). Wait until the unit is completely dry before reconnecting it to
power.
wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
-
1
-
2
Fender PT-100 Pedal Tuner Instrukcja obsługi
- Kategoria
- Akcesoria gitarowe
- Typ
- Instrukcja obsługi
w innych językach
Powiązane dokumenty
-
Fender Champion™ 100XL Instrukcja obsługi
-
Fender Champion™ 100 Instrukcja obsługi
-
Fender CHAMPION 40 Instrukcja obsługi
-
-
-
-
-
Fender Rumble™ 15/25 Instrukcja obsługi