Streamline Vivid PRO FOGGER Instrukcja obsługi

Marka: Streamline

Model: Vivid PRO FOGGER

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

SF-FG03-024

Vivid

SF-FG03-220

SF-FG03-024

Codes:

™

INSTRUCTION MANUAL

INSTR-SF-FG03

English

STREAMLINE® disclaims all liability for damage or injury as a result of improper or unreasonable use or

failure to follow operating instructions of the Vivid™ PRO

ABC

DEF

Main Power Switch

Flow Rate Knob

Lock Up Button

Chemical Tank Trigger

LED Control Panel Nozzle Cover

About your system

Warning

2W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 3

1. Charge battery before operating.

2. If your fogger is the Li-ion battery version,

to maintain battery health: Every 2 months,

drain and then fully charge the battery.

Do not charge for more than 10 hours.

3. Do not turn the machine upside down while

it contains solution.

4. After spraying chemicals, spray

clean water.

5. Do not splash any liquid on machine.

6. Avoid spraying strongly-corrosive chemicals

if possible. Otherwise, immediately spray

clean water.

7. When adjusting ﬂow rate, be careful

where the nozzle pointed.

8. Before storing, rinse solution tank with

clean water.

Vivid™

Operation Manual

1. Fill solution tank and ensure the tank

cap is screwed on securely. If your

fogger is the Li-ion battery version,

ensure the battery is charged.

4. Open ﬂow rate knob

2. Turn on the main power switch 5. Pull the trigger to spray, release to

stop spraying

3. Press ON/OFF button

Main power switch

“0” is o

Flow rate kniob

ON/OFF button

Trigger

Press Trigger Release Trigger

4W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 5

Vivid™

6. To spray continuously, use the lock

up button to lock the trigger in the

pulled position.

1. Release trigger

7. To adjust ﬂow rate or droplet size, use the ﬂow rate knob. Turn ﬂow rate knob counter-clockwise to

increase ﬂow rate and droplet size.

ON/OFF button

To stop spraying

2. Dial Down the ﬂow rate knob

3. Press ON/OFF button

4. Turn o the main power switch on

the handle

ON/OFF button

Main powe switch

6W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 7

Vivid™

1. Push the locker button 5. Reinsert battery

Attention: Upper side is with groove.

2. Remove battery

3. The battery can be charged

after it is removed.

4. A green indicator light means

charge is complete.

Main power switch

Locker button

Charging the battery

(This is only applicable if you have the Li-ion battery version)

3 4

8W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 9

Vivid™

Adjusting the speed of the motor

Setting Up the Vivid™ PRO Fogger before use:

Fogging method:

Activating the timer & setting a time limit for fogging

Trouble shooting

1. Press twice

1. Press once

1. Press again

2. Press to select the desired limit

2. Press to select “timing”

3. Once speed is selected, press and you have set the new speed

3. Once the timer is set, press twice

The fogger is turned on but wont start up by pressing button?

5. Turn the power o at the main power switch and then turn back on.

2. Press to select the desired limit

1. Firstly ensure you’re using the correct PPE for the environment you’re working in. e.g. facemask,

eye goggles, gloves and body coverall

2. If you’re using Vivid™ SENSE solution this can be poured straight into the solution tank without being diluted.

3. Remove the tank lid and carefully ﬁll the tank with fogging solution ensuring solution is not spilt on

the Vivid™ fogger. Once full, screw the lid back on and you’re ready to start

1. Before you start, open any windows in the area you’re fogging.

2. Plan your route for fogging, with the exit to the room behind you

3. Switch on the Vivid™ PRO Fogger and move it from side to side working from the ceiling down

to the ﬂoor ensuring all surfaces have a good covering.

4. When complete, switch o the machine and exit the room.

5. If you’re using the Vivid™ SENSE Fogging Solution, an internal unventilated room will require up to

30 mins stand time before re-occupation, where as a well ventilated area will only require up to 15 minutes.

10 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 11

Vivid™

• STREAMLINE® systems can be built according to customers’ exact requirements

• For non-standard systems, the user’s needs or speciﬁcations are listened to and turned

into reality.

• Whilst price is important, quality is remembered long after price is forgotten

• We insist on sourcing brand name products from around the world, only of a reputable

quality, and bring them together under the STREAMLINE® name

• All STREAMLINE® products carry a full one year’s warranty, according to the manufacturers’

standard terms and conditions of sale.

• We have an in-house technical helpline able to answer most of your questions relating to the

capabilities and functionalities of all STREAMLINE® products

• If we get it wrong, we will put it right. If you are sent a wrong item, we will immediately

attend to sending you the correct item and arrange a collection of the wrong item without

any quibbles

• STREAMLINE® is backed by a comprehensive range with massive stocks providing you with a

‘one stop shop’ for all your requirements.

Flexibility

Quality

Service

Why STREAMLINE®?

STREAMLINE® Warranty

MANUFACTURED

IN THE

UNITED KINGDOM

CHECKED AND

TESTED BY

QUALITY CONTROL

The warranty on all Machines and Equipment is

for 1 year (12-months) from RECORDED DATE

OF PURCHASE.

THIS WARRANTY EXCLUDES NORMAL

MAINTENANCE ITEMS, including but not limited

to HOSES, FILTERS, O-RINGS,

DIAPHRAGMS, VALVES, GASKETS,

CARBON BRUSHES and damage to motors

and other components as a result of failure to

replace normal maintenance items. THIS LIST

IS NOT EXHAUSTIVE.

If STREAMLINE® receives notice of such defects

during the warranty period, STREAMLINE®

will either, at its opinion, repair or replace

components which prove to be defective.

Replacement parts will only be supplied under

warranty, upon the inspection and approval of

the defective parts by STREAMLINE®.

Should it be necessary to supply replacement

parts before the opportunity to inspect, these

will be charged at current prices and credit will

only be issued upon subsequent inspection and

warranty approval by STREAMLINE®.

The customer is responsible for the cost of

return of the defective part. If warranty is

approved, STREAMLINE® will pay for the cost

of the repaired or replacement part.

This warranty excludes the following conditions

and circumstances which are at the discretion

of STREAMLINE®:

Wear and tear, misuse, abuse improper

maintenance, frost damage, the use of chemicals

other than those supplied or approved by

STREAMLINE®, improper installation or repair,

unauthorised modiﬁcation, incidental or

consequential costs, loss or damage, service,

labour or third party charges, the cost of

returning defective parts to STREAMLINE®.

This warranty constitutes the exclusive remedy

of any purchaser of a STREAMLINE® unit and

is in lieu of all other warranties, express or

implied, including without limitation any implied

warranty of merchantability or ﬁtness for use, to

the fullest extent permitted by law. In no event

shall any implied warranty of merchantability or

ﬁtness for use exceed the term of the applicable

warranty stated above and STREAMLINE® shall

have no other obligation or liability.

Important

Unfortunately these rights cannot be

transferred to a third party.

12 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 13

Vivid™