User Manual
Instrukcja Obsługi
F7100322
LED PAR 36 12W RGB
Please keep this User Manual for future
user, be sure that they also receive this
instruction booklet.
Unpack and check carefully there is no
transportation damage before using the
Before operating, ensure that the voltage
and frequency of power supply match the
It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
Disconnect main power before servicing
and maintenance.
but always by taking its base.
IMPORTANT!
at the LED PAR, as intense illumination can damaged
the display.
Don’t operate it where the temperature is
higher than this.
In the event of serious operating problem,
carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare parts.
Do not connect the device to any dimmer
pack.
Do not touch any wire during operation and
there might be a hazard of electric shock.
To prevent or reduce the risk of electrical
or moisture.
The housing must be replaced if they are
visibly damaged.
Do not look directly at the LED light spot
2. SAFETY INFORMATION
1. INTRODUCTION
LED PAR 36 12W RGB
WARNING!
User Manual •Instrukcja Obsługi
LED PAR 36 12W RGB • Art No F7100322
The unit should be mounted via its screw
holes on the bracket. Always ensure that
slipping while operating. Always ensure that
the structure to which you are attaching the
unit is secure and is able to support a weight
5.1 Connecting DMX signal
The connection is performed using cable with
4. INSTALLATION
5. CONNECTION
3. PRODUCT INFORMATION
use a safety cable that can hold 12 times
of the weight of the unit when installing
where is out of the touch of people and has no
one pass by or under it.
The device is equipped with the following
1
3
22
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
3
1
CAUTION!
(+) into a XLR plug and plug it in the DMX
DMX
Controller DMX 512 DMX 512
1
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
45
3-pin XLR
5-pin XLR
The connection is performed using
(included). The device must be
operated by qualified personnel.
Make sure that the power grid supply
5.2 Voltage specification
Input Voltage Total Power Frequency
100-240V 40W 50/60Hz
5.3 Connecting power supply
CAUTION! In the case of cable damage do not attempt to repair.
Replacement or repair can be made only on the manufacturer or by a
person with appropriate permissions.
parameters are consistent with device
parameters and limitations are not
Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light’s life; if it’s
not enough, the lamp will be dark. Please restart it after turning off
light for 20 minutes until full-cooling. Frequent switching will reduce
the life span of lamps and bulbs; intermittent using will improve the
life of bulbs and lamps.
User Manual •Instrukcja Obsługi
6. DMX CHANNELS
Mode Value Description
DMX d001-d512 8 channels DMX mode to select the
starting address
Master/Slave IP.01-IP.64 Master/Slave (64 units maximum)
Static Color A1.01-A1.10 Select the LED position
Auto Program A2.01-A2.32 Adjust hopping speed (slow to fast)
Fade Mode
A3.01-A3.19
(Press ENTER to turn
the below value)
A3.01-A3.32 Adjust hopping speed (slow to fast)
Sound Active
Mode
A4.01-A4.19
(Press ENTER to turn
the below value) Select sound-active program
A4.01-A4.04 Adjust sound-activated sensitivity
Strobe Mode
A5.01-A5.19
(Press ENTER to turn
the below value) Select the LED position
A5.01-A5.32 Adjust strobe speed (slow to fast)
Static Color
Dimmer
r000-255
Adjust the brightness of different LED
position
g000-255
b000-255
U000-255
LED PAR 36 12W RGB • Art No F7100322
OSTRZEŻENIE!
WAŻNE!
User Manual •Instrukcja Obsługi
CH Function Value Description
1
No Function 0-10
Static Color 11-50 + CH2 to Select LED Position
Auto-Play 51-100 +CH3 to Adjust Speed
Fade 101-150 +CH2 to Select LED Position
+CH3 to Adjust Speed
Sound-Active 151-200
Strobe 201-255 +CH2 to Select LED Position
+CH3 to Adjust Speed
2 Different LED Position 0-255
3 Speed Adjustment 0-255 Slow to Fast
4 Dimmer for 5-7 CH 0-255
0-100%
5 Red 0-255
6 Green 0-255
7 Blue 0-255
8 empty 0-255
2. ZASADY BEZPIECZENSTWA
3. INFORMACJE O PRODUKCIE
4. INSTALACJA
LED PAR 36 12W RGB
przez wykwalifikowany personel, aby
w dobrze wentylowanym pomieszczeniu,
uszkodzenia spowodowane niestabilnym
1. WPROWADZENIE
LED PAR 36 12W RGB • Art No F7100322
User Manual •Instrukcja Obsługi
5.2 Specyfikacja zasilania
5.3 Podłączenie zasilania
Napięcie Zasilania Pobór Mocy Częstotliwość zasilania
100-240V 40W 50/60Hz
5.1 Podłączenie sygnału DMX
5. POLACZENIA
1
3
22
ŻEŃSKI
XLR
GROUND
DMX +
DMX -
MĘSKI
XLR
3
1
wykwalifikowany personel techniczny.
UWAGA!
ŻEŃSKI
XLR
1
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
45
3-pin XLR
5-pin XLR
DMX
Controller DMX 512 DMX 512
6. LISTA KANALOW DMX
Tryb Wartość Opis
DMX d001-d512 8-kanałowy tryb DMX do wyboru
adresu początkowego
Master/Slave IP.01-IP.64 Master/Slave (Maksymalnie 64
jednostki)
Static Color A1.01-A1.10 Wybierz pozycję diody LED
Auto Program A2.01-A2.32 Dostosuj prędkość przeskakiwania (od
wolnego do szybkiego)
Fade Mode
A3.01-A3.19
(Press ENTER to turn
the below value)
A3.01-A3.32 Dostosuj prędkość przeskakiwania
(od wolnego do szybkiego)
Sound Active
Mode
A4.01-A4.19
(Press ENTER to turn
the below value) Wybierz program aktywacji dźwiękiem
A4.01-A4.04 Dostosuj czułość
Strobe Mode
A5.01-A5.19
(Press ENTER to turn
the below value) Wybierz pozycję diody LED
A5.01-A5.32 Dostosuj prędkość stroboskopu
(od wolnego do szybkiego)
Static Color
Dimmer
r000-255
Dostosuj jasność różnych pozycji LED
g000-255
b000-255
U000-255
LED PAR 36 12W RGB • Art No F7100322
CH Funkcja Wartość Opis
1
brak funkcji 0-10
Statyczny Kolor 11-50 + CH2 aby wybrać pozycję LED
Auto-Play 51-100 +CH3 aby dostosować prędkość
Zanik 101-150 +CH2 aby wybrać pozycję LED
+CH3 aby dostosować prędkość
Aktywacja-Dźwiękiem 151-200
Stroboskop 201-255 +CH2 aby wybrać pozycję LED
+CH3 aby dostosować prędkość
2Różne pozycje LED 0-255
3Dostosowanie szybkości 0-255 Slow to Fast
4Ściemniacz dla
kanałów 5-7 0-255
0-100%
5 Czerwony 0-255
6Zielony 0-255
7 Niebieski 0-255
8 pusty 0-255
User Manual •Instrukcja Obsługi
LED PAR 36 12W RGB • Art No F7100322
www.flash-butrym.pl
F7100322
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
