Yamaha HD200 Instrukcja obsługi

HD-200

Harmony Director

Owner’s Manual

Bedienungsanleitung

Mode d'emploi

Manual de instrucciones

Руководство пользователя

DeutschEnglish EspañolFrançais

中文

Русский

한국어

ᴹᇣ⢙䍘

䜘Ԧ਽〠

ཊⓤҼ㤟䟊

3%'(

↔ḷ䇶䘲⭘Ҿ൘ѝॾӪ≁ޡ઼ഭ䬰୞Ⲵ⭥ᆀؑ᚟ӗ૱Ǆ

ḷ䇶ѝ䰤ⲴᮠᆇѪ⧟؍֯⭘ᵏ䲀ⲴᒤᮠǄ

ᵜ㺘Ṭ׍ᦞ6-7Ⲵ㿴ᇊ㕆ࡦǄ

ƻ㺘⽪䈕ᴹᇣ⢙䍘൘䈕䜘Ԧᡰᴹ൷䍘ᶀᯉѝⲴਜ਼䟿൷൘*%7㿴ᇊⲴ䲀䟿㾱≲ԕлǄ

h㺘⽪䈕ᴹᇣ⢙䍘㠣ቁ൘䈕䜘ԦⲴḀа൷䍘ᶀᯉѝⲴਜ਼䟿䎵ࠪ*%7㿴ᇊⲴ䲀䟿㾱≲Ǆ

⭥Ⓚ䘲䝽ಘ

ঠࡧ㓯䐟ᶯ

䫵3E ⊎+J

䭹&G

ޝԧ䬜&U9,

ཊⓤ㚄㤟

3%%

h

ƻ

ӝ૷ѣᴿᇩ⢟䍞Ⲻ੃〦਀੡䠅

PLEASE KEEP THIS MANUAL

This product utilizes batteries or an external power supply (adapter).

DO NOT connect this product to any power supply or adapter other

than one described in the manual, on the name plate, or specifically

recommended by Yamaha.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that

accompany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at

the time of printing. However, Yamaha reserves the right to change

or modify any of the specifications without notice or obligation to

update existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound levels

that could cause permanent hearing loss. DO NOT operate for long

periods of time at a high volume level or at a level that is uncomfort-

able. If you experience any hearing loss or ringing in the ears, you

should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period

before damage occurs.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how

a function or effect works (when the unit is operating as designed)

are not covered by the manufacturer’s warranty, and are therefore the

owner's responsibility. Please study this manual carefully and consult

your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi-

ronmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In

keeping with both the letter and the spirit of the law, we want you to

be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of

battery is approximately five years. When replacement becomes

necessary, contact a qualified service representative to perform the

replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery

being charged.

When installing batteries, do not mix batteries with new, or with bat-

teries of a different type. Batteries MUST be installed correctly. Mis-

matches or incorrect installation may result in overheating and

battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all

batteries away from children. Dispose of used batteries promptly and

as regulated by the laws in your area. Note: Check with any retailer

of household type batteries in your area for battery disposal informa-

tion.

Disposal Notice:

Should this product become damaged beyond repair, or for some

reason its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of

products that contain lead, batteries, plastics, etc. If your dealer is

unable to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model

number, serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number, and the

date of purchase in the spaces provided below and retain this man-

ual as a permanent record of your purchase.

Model

Serial No.

Purchase Date

SPECIAL MESSAGE SECTION

92-BP (bottom)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your authority, granted

by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with

the requirements listed in FCC Regulations, Part 15 for Class “B”

digital devices. Compliance with these requirements provides a

reasonable level of assurance that your use of this product in a

residential environment will not result in harmful interference with

other electronic devices. This equipment generates/uses radio

frequencies and, if not installed and used according to the

instructions found in the users manual, may cause interference

harmful to the operation of other electronic devices. Compliance

with FCC regulations does not guarantee that interference will

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

not occur in all installations. If this product is found to be the

source of interference, which can be determined by turning the

unit “OFF” and “ON”, please try to eliminate the problem by using

one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker

or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change

the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type

of product. If you cannot locate the appropriate retailer, please

contact Yamaha Corporation of America, Electronic Service Divi-

sion, 6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed

by Yamaha Corporation of America or its subsidiaries.

FCC INFORMATION (U.S.A.)

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge

som den ar ansluten till vägguttaget, även om själva apparaten

har stängts av.

ADVARSEL: Netspæendingen til dette apparat er IKKE

afbrudt, sålæenge netledningen siddr i en stikkontakt, som er t

endt — også selvom der or slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita

koko laitetta verkosta.

(standby)

Entsorgung leerer Batterien (nur innerhalb Deutschlands)

Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte Bat-

terien oder Akkumulatoren dürfen nicht in den Hausmüll. Sie

können bei einer Sammelstelle für Altbatterien bzw. Sondermüll

abgegeben werden. Informieren Sie sich bei Ihrer Kommune.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA (Perchlorate)

This product contains a battery that contains perchlorate material.

Perchlorate Material—special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

保护环境

如果需要废弃设备（及电池）时，请与本地相关机构联系，获取正确的废弃方法。

请勿将设备（及电池）随意丢弃或作为生活垃圾处理。

　制造商：雅马哈株式会社

　制造商地址：日本静冈县滨松市中区中泽町 10-1

　进口商：雅马哈乐器音响（中国）投资有限公司

　进口商地址：上海市静安区新闸路 1818 号云和大厦 2 楼

　原产地：日本

产品标准编号：GB/T 12105

(battery)

이 기기는 가정용(B급) 전자파적 합기기로서 주로 가정에서 사

용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다.

(class b korea)

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used

electrical and electronic products and batteries should not be mixed with general household

waste.

For proper treatment, recovery and recycling of old products and?used batteries, please take

them to applicable collection points, in accordance with your national legislation and the

Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources

and prevent any potential negative effects on human health and the environment which could

otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please

contact your local municipality, your waste disposal service or the point of sale where you

purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier

for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please

contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with

the requirement set by the Directive for the chemical involved.

Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte und benutzter

Batterien

Befinden sich diese Symbole auf den Produkten, der Verpackung und/oder beiliegenden

Unterlagen, so sollten benutzte elektrische Geräte und Batterien nicht mit dem normalen

Haushaltsabfall entsorgt werden.

In Übereinstimmung mit Ihren nationalen Bestimmungen und den Richtlinien 2002/96/EC und

2006/66/EC, bringen Sie alte Geräte und benutzte Batterien bitte zur fachgerechten

Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden

Sammelstellen.

Durch die fachgerechte Entsorgung der Elektrogeräte und Batterien helfen Sie, wertvolle

Ressourcen zu schützen und verhindern mögliche negative Auswirkungen auf die menschliche

Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Müllentsorgung auftreten

könnten.

Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte und

Batterien, kontaktieren Sie bitte Ihre örtliche Stadt- oder Gemeindeverwaltung, Ihren

Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel.

[Information für geschäftliche Anwender in der Europäischen Union]

Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren Händler oder

Zulieferer für weitere Informationen.

[Entsorgungsinformation für Länder außerhalb der Europäischen Union]

Diese Symbole gelten nur innerhalb der Europäischen Union. Wenn Sie solche Artikel

ausrangieren möchten, kontaktieren Sie bitte Ihre örtlichen Behörden oder Ihren Händler und

fragen Sie nach der sachgerechten Entsorgungsmethode.

Anmerkung zum Batteriesymbol (untere zwei Symbolbeispiele):

Dieses Symbol kann auch in Kombination mit einem chemischen Symbol verwendet werden. In

diesem Fall entspricht dies den Anforderungen der Direktive zur Verwendung chemischer

Stoffe.

Information concernant la Collecte et le Traitement des piles usagées et des déchets

d’équipements électriques et électroniques

Les symboles sur les produits, l'emballage et/ou les documents joints signifient que les produits

électriques ou électroniques usagés ainsi que les piles ne doivent pas être mélangés avec les

déchets domestiques habituels.

Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements

électriques et électroniques et des piles usagées, veuillez les déposer aux points de collecte

prévus à cet effet, conformément à la réglementation nationale et aux Directives 2002/96/EC et

2006/66/EC.

En vous débarrassant correctement des déchets d’équipements électriques et électroniques et

des piles usagées, vous contribuerez à la sauvegarde de précieuses ressources et à la

prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors d'un

traitement inapproprié des déchets.

Pour plus d'informations à propos de la collecte et du recyclage des déchets d’équipements

électriques et électroniques et des piles usagées, veuillez contacter votre municipalité, votre

service de traitement des déchets ou le point de vente où vous avez acheté les produits.

[Pour les professionnels dans l'Union Européenne]

Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques

veuillez contacter votre vendeur ou fournisseur pour plus d'informations.

[Information sur le traitement dans d'autres pays en dehors de l'Union Européenne]

Ces symboles sont seulement valables dans l'Union Européenne. Si vous souhaitez vous

débarrasser de déchets d’équipements électriques et électroniques ou de piles usagées,

veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de

traitement appropriée.

Note pour le symbole "pile" (deux exemples de symbole ci-dessous):

Ce symbole peut être utilisé en combinaison avec un symbole chimique. Dans ce cas il respecte

les exigences établies par la Directive pour le produit chimique en question.

Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo y Baterías

usadas

Estos símbolos en los productos, embalaje, y/o documentación que se acompañe significan

que los productos electrónicos y eléctricos usados y las baterías usadas no deben ser

mezclados con desechos hogareños corrientes.

Para el tratamiento, recuperación y reciclado apropiado de los productos viejos y las baterías

usadas, por favor llévelos a puntos de recolección aplicables, de acuerdo a su legislación

nacional y las directivas 2002/96/EC y 2006/66/EC.

Al disponer de estos productos y baterías correctamente, ayudará a ahorrar recursos valiosos y

a prevenir cualquier potencial efecto negativo sobre la salud humana y el medio ambiente, el

cual podría surgir de un inapropiado manejo de los desechos.

Para mayor información sobre recolección y reciclado de productos viejos y baterías, por favor

contacte a su municipio local, su servicio de gestión de residuos o el punto de venta en el cual

usted adquirió los artículos.

[Para usuarios de negocios en la Unión Europea]

Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su

vendedor o proveedor para mayor información.

[Información sobre la Disposición en otros países fuera de la Unión Europea]

Estos símbolos sólo son válidos en la Unión Europea. Si desea deshacerse de estos artículos,

por favor contacte a sus autoridades locales y pregunte por el método correcto de disposición.

Nota sobre el símbolo de la batería (ejemplos de dos símbolos de la parte inferior)

Este símbolo podría ser utilizado en combinación con un símbolo químico. En este caso el

mismo obedece a un requerimiento dispuesto por la Directiva para el elemento químico

involucrado.

1

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the specified adaptor (page 3) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• Do not place the AC adaptor cord near heat sources such as heaters or radiators,

and do not excessively bend or otherwise damage the cord, place heavy objects

on it, or place it in a position where anyone could walk on, trip over, or roll

anything over it.

• Do not open the instrument or attempt to disassemble the internal parts or

modify them in any way. The instrument contains no user-serviceable parts. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might spill into

any openings. If any liquid such as water seeps into the instrument, turn off the

power immediately and unplug the power cord from the AC outlet. Then have the

instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is a

sudden loss of sound during use of the instrument, or if any unusual smells or

smoke should appear to be caused by it, immediately turn off the power switch,

disconnect the adaptor plug from the outlet, and have the instrument inspected

by qualified Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord.

• Unplug the AC power adaptor when not using the instrument, or during

electrical storms.

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• Always make sure all batteries are inserted in conformity with the +/- polarity

markings. Failure to do so might result in overheating, fire, or battery fluid

leakage.

• Always replace all batteries at the same time. Do not use new batteries together

with old ones. Also, do not mix battery types, such as alkaline batteries with

manganese batteries, or batteries from different makers, or different types of

batteries from the same maker, since this can cause overheating, fire, or battery

fluid leakage.

• Do not dispose of batteries in fire.

• Do not attempt to recharge batteries that are not intended to be charged.

• When the batteries run out, or if the instrument is not to be used for a long time,

remove the batteries from the instrument to prevent possible leakage of the

battery fluid.

• Keep batteries away from children.

• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid

should come in contact with your eyes, mouth, or skin, wash immediately with

water and consult a doctor. Battery fluid is corrosive and may possibly cause

loss of sight or chemical burns.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or

heat (such as in direct sunlight, near a heater, or in a car during the day) to

prevent the possibility of panel disfiguration or damage to the internal

components.

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile

phone, or other electric devices. Otherwise, the instrument, TV, or radio may

generate noise.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/AC power adaptor

Battery

Location

(4)-12 1/2

2

• Before moving the instrument, remove all connected adaptor and other cables.

• When setting up the product, make sure that the AC outlet you are using is

easily accessible. If some trouble or malfunction occurs, immediately turn off

the power switch and disconnect the plug from the outlet. Even when the power

switch is turned off, electricity is still flowing to the product at the minimum

level. When you are not using the product for a long time, make sure to unplug

the power cord from the wall AC outlet.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum. Also, be sure to set the volumes of all

components at their minimum levels and gradually raise the volume controls

while playing the instrument to set the desired listening level.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,

solvents, cleaning fluids, or chemical-impregnated wiping cloths.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel

or keyboard. If this happens, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualified

Yamaha service personnel.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might

discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

• This instrument has a built-in lithium backup battery. When you unplug the

power cord from the AC outlet, the internal data is retained. However, if the

backup battery fully discharges, this data will be lost. When the backup battery

is running low, the display indicates “Backup Battery Low.” In this case, have

qualified Yamaha service personnel replace the backup battery.

Always turn the power off when the instrument is not in use.

When using a power adaptor, even when the power switch is in the “STANDBY” position, electricity is still flowing to the instrument at the minimum level. When you are not

using the instrument for a long time, make sure you unplug the AC power adaptor from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

Connections

Maintenance

Handling caution

Backup battery

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

• The illustrations and LCD display as shown in this owner’s manual are for instructional purposes only, and may appear somewhat different from those on your

instrument.

(4)-12 2/2

English

3

Specifications

* Specifications and descriptions in this owner’s manual

are for information purposes only.

Yamaha Corp. reserves the right to change or modify

products or specifications at any time without prior

notice. Since specifications, equipment or options may

not be the same in every locale, please check with your

Yamaha dealer.

Tone Generator

and Polyphony

FM Tone Generator: 8 Notes

AWM Tone Generator: 32 Notes

(Piano, Metronome)

Keyboard 49 Keys C scale

(4 Octaves with touch response)

Basic Controls STANDBY/ON switch

MASTER VOLUME slider

Voices 10 Voices

Flute, Oboe, Clarinet, Saxophone,

Organ, Trumpet, Horn, Brass,

String, Piano

HOLD button

Figure FIGURE button

FIGURE sliders

ATTACK, RELEASE, BRILLIANCE

Transposition TRANSPOSE button

C button

B

b

button

E

b

button

F button

OCTAVE switch (LOW1, LOW2, MID,

HIGH)

Temperaments EQUAL TEMPERED button

PURE TEMPERED MAJOR button

PURE TEMPERED MINOR button

MEMORY button

STANDARD PITCH buttons

Hz button

CENT button

KEY SELECT buttons

MANUAL button

AUTO button

Note Select buttons

C, C

#

, D, E

b

, E, F, F

#

, G, G

#

, A, B

b

, B

INDIVIDUAL PITCH button

INDIVIDUAL VOLUME button

Setting SETTING button

Metronome MEMORY button

TEMPO button

BEAT button

CURSOR buttons Y Z

QUARTER TRIPLET button

TAP TEMPO button

START/STOP button

BEAT VOLUME sliders

ACCENT slider

slider

Data Entry DATA ENTRY dial

DATA ENTRY [+]/[-] buttons

Display LCD Display

HARMONY display

METRONOME display

CONTRAST dial

HARMONY CONTRAST dial

METRONOME CONTRAST dial

External Input/

Output Jacks

DC 12V IN jack

Foot Pedal jack

(Standard Stereo Phone jack)

Output jack

(Standard Monaural Phone jack)

Phones jack

(Standard Stereo Phone jack)

Power Amplifier Max. 7.5 W Output

Speaker 12 cm (4 Ω)

Power Supply AC Power Adaptor* (DC 12V 700mA)

D Cell Batteries (“AA” size, LR6 or

equiv.) x 6

Power

Consumption

With AC Power Adaptor: 5 W

(operating at max. vol.)

Battery Powered: 2.5 W (operating at

max. vol.)

Dimensions Width: 855 mm (33 11/16")

Depth: 262 mm (10 5/16")

Height: 93.9 mm (3 11/16")

Weight: 4.35 kg (9 lbs. 9 Oz.) (without

batteries)

Battery Life Until Low Power Warning

Approx. 3 hrs

Until Power Depleted

Approx. 4 hrs

(When using alkaline batteries)

Accessories AC Power Adaptor PA-3C or PA-130*

(Supplied in the USA only)

Owner’s Manual

* The power adaptor supplied with HD-200 is intended

for use in the USA. When using the HD-200 in any

other region, please purchase and use an AC power

adaptor specified or recommended by Yamaha.

4

Contents

PRECAUTIONS 1

Specifications 3

Panel Controls and Jacks 5

Setting Up and Voice Settings 7

Turning the Power On/Off. . . . . . . . . . . . . . . . . . . 7

Master Volume Control . . . . . . . . . . . . . . . . . . . . . 7

Selecting a Voice for Tuning. . . . . . . . . . . . . . . . . 7

Setting Figure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Turning Hold On/Off . . . . . . . . . . . . . . . . . . . . . . . 8

Selecting Octave. . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Temperaments 9

Selecting a Temperament. . . . . . . . . . . . . . . . . . . . 9

Note Select Buttons . . . . . . . . . . . . . . . . . . . . . . . 10

Adjusting the Pitch for Each Note . . . . . . . . . . . . 10

Adjusting the Volume for Each Note. . . . . . . . . . 10

Creating a User Temperament . . . . . . . . . . . . . . . 10

Copying a Temperament . . . . . . . . . . . . . . . . . . . 10

Setting the Root Key . . . . . . . . . . . . . . . . . . . . . . 11

Standard Pitch Setting . . . . . . . . . . . . . . . . . . . . . 12

Transpose Settings . . . . . . . . . . . . . . . . . . . . . . . . 12

Metronome Settings 13

START/STOP . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

BEAT VOLUME. . . . . . . . . . . . . . . . . . . . . . . . . 13

Tempo Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Beat Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Quarter Triplet . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Other Settings 16

Foot Pedal Function. . . . . . . . . . . . . . . . . . . . . . . 16

Harmony Volume. . . . . . . . . . . . . . . . . . . . . . . . . 16

Metronome Sound . . . . . . . . . . . . . . . . . . . . . . . . 16

Metronome Pattern. . . . . . . . . . . . . . . . . . . . . . . . 17

Volume Balance . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Jacks and Dials 18

DC 12V IN Jack. . . . . . . . . . . . . . . . . . . . . . . . . . 18

FOOT PEDAL Jack . . . . . . . . . . . . . . . . . . . . . . . 18

OUTPUT Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

PHONES Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

CONTRAST Dials . . . . . . . . . . . . . . . . . . . . . . . . 18

Initializing 19

Error Messages 19

About the Preset Temperaments 19

Blank Chart 21

Troubleshooting 22

English

5

Panel Controls and Jacks

Equal C Major

Man

u

C ( 0)

442.0Hz/

+

0.0

0.0 0.0 0.0 0.0 0.0

0

VOICE buttons (➝page 7) TRANSPOSE buttons (➝page 12)

FIGURE sliders and button

(➝page 8)

TEMPERAMENT buttons

(➝page 9)

OCTAVE switch

(➝page 8)

HOLD button

(➝page 8)

HARMONY display

6

English

4

4>

4

4>

n

ual

+8c

0

0.0

METRONOME buttons and sliders (➝page 13)DATA ENTRY buttons

DATA ENTRY dial

MASTER VOLUME slider

(➝page 7)

STANDBY/ON switch

(➝page 7)

Input/Output jacks (➝page 18)

STANDARD PITCH

buttons

SETTING button

7

Setting Up and Voice Settings

Turning the Power On/Off

This instrument will run either from an optional AC power adaptor or batteries.

Make sure that the instrument’s [STANDBY/ON] switch is set to STANDBY (off),

then execute the following steps.

When using the AC power adaptor, connect the adaptor's DC plug to the

instrument’s DC 12V IN jack on the rear panel, then connect the other end

(standard AC plug) to the nearest electrical outlet.

When using batteries, open the battery compartment cover located on the bottom

panel, insert six new alkaline batteries, then replace the compartment cover,

making sure that it locks firmly in place.

After setting up, press the [STANDBY/ON] switch to turn on the power.

The HARMONY display and METRONOME display show the same information

as the last time the power was turned off.

Because this instrument is equipped with a backup battery, the settings made on this instrument will be

maintained even if the power is turned off.

Master Volume Control

Move the [MASTER VOLUME] slider toward MAX to turn up the volume and

Move the [MASTER VOLUME] slider toward MIN to turn down the volume.

Selecting a Voice for Tuning

This instrument features 10 different voices for tuning. You can select the

desired voice by pressing the corresponding button. The lamp of the

selected button lights.

The best voice for tuning

It may be a good idea to select ORGAN or STRING so that both the teacher and student can

easily recognize the pitch difference between the instrument's sound (played by the student)

and the Harmony Director's sound.

Co

l

um

n

8

English

Setting Figure

With this function, you can change the tonal characteristics.

By pressing the [FIGURE] button so that its lamp lights, the three

sliders become available and the settings made via these sliders are

applied to the keyboard sound.

Move the [ATTACK] slider to adjust how long it takes for the sound to

reach full volume when a note is pressed.

Move the [RELEASE] slider to adjust how long it takes for the sound to

decay to silence after a note is released.

Move the [BRILLIANCE] slider to adjust the brilliance of the selected voice.

By pressing the [FIGURE] button so that its lamp goes out, the three

sliders become unavailable and the settings made via these sliders are not applied to the keyboard sound.

* This function is not available when PIANO is selected.

Turning Hold On/Off

With this function, notes can be maintained even if your fingers are released from

the keyboard.

Press the [HOLD] button so that its lamp lights. In this state, notes will be

maintained even if your fingers are released from the keyboard. When one or more

notes are being maintained, you can change the maintained notes by pressing other

keys.

Press the [HOLD] button again to exit this state. Turning off this button will stop

the maintained sound.

Selecting Octave

With this function, you can change the keyboard’s octave.

Move the [OCTAVE] switch to select the octave.

Switch position and octave

Switch Position LOW1 LOW2 MID HIGH

Octave C0–C4 C1–C5 C2–C6 C3–C7

9

Temperaments

Selecting a Temperament

Press the [EQUAL TEMPERED] button so that its lamp lights.

“Equal” appears on the HARMONY display.

Press the [PURE TEMPERED MAJOR] button so that its lamp

lights. “Pure (key name) Major” appears on the HARMONY

display.

Press the [PURE TEMPERED MINOR] button so that its lamp

lights. “pure (key name) minor” appears on the HARMONY

display.

Press the [MEMORY] button so that its lamp lights. “User1”–

“User5” appears on the HARMONY display. You can select

“User1”–“User5” by using the DATA ENTRY dial or [+]/[-]

buttons.

You can save your own original temperament settings to the

Memory as User Temperaments. For details, see the next page.

Equal C Major

Manual

C ( 0)

442.0Hz/ +8c

0.0

0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0

Pure C Major

Manual

C ( 0)

442.0Hz/ +8c

0.0

-29.3 15.6 -31.3 -27.4 17.6

3.9 -13.7 -2.0 2.0 -15.6 -11.7

pure a minor

Manual

C ( 0)

442.0Hz/ +8c

15.6

-13.7 31.3 -15.6 -11.7 33.2

-2.0 2.0 13.7 17.6 0.0 3.9

Manual

C ( 0)

442.0Hz/ +8c

0.0

0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0

User1 C Major

Note that temperament settings other than Equal Temperament cannot be applied to the PIANO.

When the PIANO is selected, “Piano” will be shown on the HARMONY display, the keyboard

will be set to Equal Temperament, and you cannot edit the pitch and volume for each key.

Note

10

English

Note Select Buttons

When either the INDIVIDUAL [VOLUME] or [PITCH] button is turned on, these buttons are used to select

the note for which the volume or pitch is to be adjusted.

When both the INDIVIDUAL [VOLUME] and [PITCH] buttons are turned off, these buttons are used to select

the root key of the selected temperament.

Adjusting the Pitch for Each Note

The pitch for each note (C–B) can be set in 0.1 cent increments.

Press the INDIVIDUAL [PITCH] button so that its lamp lights,

press the desired Note Select button, and then adjust the pitch by

using the DATA ENTRY dial or [+]/[-] buttons. The setting range

is -55 cent – +55 cent. Press the DATA ENTRY [+] and [-] buttons

simultaneously to return the cent value to “0.”

Adjusting the Volume for Each Note

The volume for each note (C–B) can be set.

Press the INDIVIDUAL [VOLUME] button so that its lamp

lights, press the desired Note Select button, and then adjust the

volume by using the DATA ENTRY dial or [+]/[-] buttons. The

setting range is -15 – +5. Press the DATA ENTRY [+] and [-] but-

tons simultaneously to return the value to “0.”

Creating a User Temperament

With this function, you can save your own original temperament settings (pitch and volume settings for each

note) to “User1”–“User5” as User Temperaments.

Press the [MEMORY] button so that its lamp lights. Select “User1”–“User5” by using the DATA ENTRY dial

or [+]/[-] buttons, then set the volume and pitch for each note by using the INDIVIDUAL [VOLUME] and

[PITCH] buttons. After making the settings, select another Memory number and make different temperament

settings if necessary.

Copying a Temperament

You can copy temperament settings to any of “User1”–“User5.”

After selecting one of “User1”–“User5,” hold the [EQUAL TEMPERED] button and press the [MEMORY]

button to copy the Equal Temperament settings to the currently selected Memory number. This operation also

applies to the PURE TEMPERED [MAJOR] and [MINOR] buttons.

User1 C Major

Auto

C ( 0)

442.0Hz/ +8c

0.0

0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0

User1 C Major

Auto

C ( 0)

442.0Hz/ +8c

0

00 000

000000

11

Setting the Root Key

With this function, the root key can be set for each temperament.

When the [MANUAL] button is pressed so that its lamp lights,

the root key can be specified by pressing one of the Note Select

buttons manually.

When the [AUTO] button is pressed so that its lamp lights, the

root key and chord type (major or minor) will be determined by

playing several notes on the keyboard.

Pure C Major

Manual

C ( 0)

442.0Hz/ +8c

0.0

-29.3 15.6 -31.3 -27.4 17.6

3.9 -13.7 -2.0 2.0 -15.6 -11.7

Pure C Major

Auto

C ( 0)

442.0Hz/ +8c

0.0

-29.3 15.6 -31.3 -27.4 17.6

3.9 -13.7 -2.0 2.0 -15.6 -11.7

If the notes played cannot be recognized as a

chord, the current root key and current chord

type will be maintained.

Note

MAJOR minor 7 m7

(7)sus4

mM7 6 m6

aug

dim

M7 m7



5

7



5 C/D

Chord types recognized when [AUTO] is turned on

The following chart shows examples for the root key “C.” The inversion of each fingering is also recognized.

The recognized root key and chord type

will be shown on the HARMONY display.

12

English

Standard Pitch Setting

With this function, you can change the overall pitch setting which

is to be used as the standard pitch of an ensemble such as an

orchestra or choir.

Press the [Hz] button to move the cursor to the Hz column, then

set the pitch in Hz by using the DATA ENTRY dial or [+]/[-]

buttons. The setting range is 430.0n Hz–450.3 Hz. Press the

DATA ENTRY [+] and [-] buttons simultaneously to reset the

value to “442.0Hz.”

Press the [CENT] button to move the cursor to the Cent column,

then set the pitch in cents by using the DATA ENTRY dial or

[+]/[-] buttons. The setting range is -40 cent – +40 cent. Press the

DATA ENTRY [+] and [-] buttons simultaneously to reset the

value to “0.”

Transpose Settings

With this function, you can shift the keyboard pitch up or down in

semitones.

Press the [TRANSPOSE] button to move the cursor to the Trans-

pose column, then set the transpose value by using the DATA

ENTRY dial or [+]/[-] buttons. The setting range is -7 – +7. Press

the DATA ENTRY [+] and [-] buttons simultaneously to reset the

Transpose value to “0.”

You can transpose the key directly to C, B

b

, E

b

and F by pressing the corresponding button.

Button Transpose Value

[C] button 0

[B

b

] button -2 semitones

[E

b

] button +3 semitones

[F] button +5 semitones

User1 C Major

Auto

C ( 0)

442.0Hz/ +8c

0.0

0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0

User1 C Major

Auto

C ( 0)

442.0Hz/ +8c

0.0

0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0

User1 C Major

Auto

C ( 0)

442.0Hz/ +8c

0.0

0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0

C

o

l

um

n

[About the pitch]

The pitch value (described in Hz) is used for tuning the

sounds of various instruments. In many cases, a value

between 440–442Hz is set for A.

13

Metronome Settings

START/STOP

Press the [START/STOP] button to start the metronome.

Press the [START/STOP] button again to stop the metronome.

BEAT VOLUME

These five sliders let you adjust the volume for each beat timing.

The ACCENT slider lets you adjust the volume for the accent sound (played on the

first beat of the meter set on the METRONOME display).

The quarter notes do not sound and the triplets sound at a double tempo of the triplet.

When the metronome pattern is set to “Alternate”, the notes marked ● do not sound.

(Refer to “Other Settings” on page 16)

ACCENT

Sounding Timing Chart (4/4)

Sounding Timing Chart (6/8)

14

English

Tempo Setting

On the METRONOME display, you can set the metronome tempo. Press the

[TEMPO] button to move the cursor to the tempo value column, then set the

quarter note tempo by using the DATA ENTRY dial or [+]/[-] buttons.

The tempo range is 32–280. Press the [+] and [-] buttons simultaneously to

reset the tempo value to 120.

Beat Setting

On the METRONOME display, you can set the meter as well as the

metronome tempo. You can also set an irregular meter or multi-metered

beats (e.g., 2/8+2/8+3/8) as well as a normal meter (e.g., only 4/4). You can

create multi-metered beats of up to 8 measures.

To set a normal meter, press the [BEAT] button to move the cursor to the

meter section, then set the numerator and denominator values of the meter

respectively by using the DATA ENTRY dial or [+]/[-] buttons. Use the

CURSOR buttons to move the cursor between the numerator and

denominator.

To set an irregular meter, press the CURSOR [>] button several times to

indicate the meter for the next measure. Set the numerator and denominator

values of the meter respectively by using the DATA ENTRY dial or [+]/[-]

buttons. Perform the same operation for additional measures.

Quarter Triplet

The metronome can be played back as quarter triplet by turning on the [QUARTER

TRIPLET] lamp.

When the [QUARTER TRIPLET] button is turned on, you can hear the correct

quarter triplet by setting the meter to 4/4, setting the BEAT VOLUME quarter note

slider to a low level, setting the BEAT VOLUME triple note slider to a higher

level, and setting the other BEAT VOLUME sliders to 0.

4

4>

63662639

8 4884848

Press the [MEMORY] and [BEAT] buttons simultaneously to reset the beat to 4/4 (1 measure).

Note

3 3 3

15

Tap

With this function, you can set the metronome tempo by tapping a key.

Press the [TAP TEMPO] button so that its lamp lights, then tap the

rightmost white key three times (“Tap2,” “Tap1,” and “Tap0” are shown in

order) to start the metronome in the tempo calculated by averaging the

intervals between the three taps.

When the metronome is stopped, the above operation will start the

metronome. When the metronome is running, the above operation will

change the playback tempo.

Press the [TAP TEMPO] button again to return the keyboard to its normal

state.

Memory

With this function, you can save up to eight metronome settings (“M1”–

“M8”). Each of them can be called up via a single touch.

Press the [MEMORY] button so that its lamp lights, then select the Memory

number (“M1”–“M8”) by using the DATA ENTRY dial or [+]/[-] buttons.

After settings for the current Memory number are completed, select another

number to make settings for if necessary.

When the [MEMORY] lamp is turned on, you can select the Memory

number (“M1”–“M8”) by pressing the key corresponding to “M1”–“M8”

printed on the top panel above the keyboard.

4

4>

When the TAP indicator is turned on, press the [A], [B

b

] and [B] key on the far right side of the

keyboard to trigger the sound of claves, side stick, and cowbell, respectively.

Note

63662639

84884848

Strona jest ładowana ...

Yamaha HD200 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Yamaha HD200 Instrukcja obsługi

w innych językach

Powiązane dokumenty