Motorola MDC300 Instrukcja obsługi

Kategoria
Rejestratory jazdy
Typ
Instrukcja obsługi
Model: MDC300
USER’S GUIDE
Dashboard Camera
The features described in this user’s guide are subject to
modifications without prior notice.
EN DE PL SV
Welcome...
to your new Motorola Dashboard
Camera!
Thank you for purchasing the Dashboard Camera. Please
keep your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to
provide a copy of your dated sales receipt to conrm warranty
status. Registration is not required for warranty coverage.
For product related questions, please visit:
www.motorolastore.com/support
This User’s Guide has all the information you need to make
the most out of your product.
Please read the Safety Instructions on page 5 before you
install the unit.
Before you use the Dashboard Camera, we recommend you
insert a SD card into the SD card slot.
Got everything?
Dashboard Camera
Windshield Mount
Car Adapter
User Manual
Overview of your Dashboard Camera
1. Micro SD card slot
2. Menu/Back Button
Setting switcher/Back
3. Lock Button
4. Mode Button
Video/ Replay mode switcher
5. On/Off Button
Short press when Off: turn On.
Short press when On: Screen
On/Off.
Long press when On: turn Off
6. Up Button
Rewind during playback; Short
press when in Video mode: Take
photo
7. OK Button
Enter when setting
Short press when in Video
mode: Start/Stop recording
8. Down Button
Fast forward during playback;
Short press when recording:
Mute
9. USB/Power Socket
10. Mount Nut
11. Speaker
12. Microphone
13. Reset Button
14. Lens
15. Charge Indicators
Red: Charging
Green: Fully charged
16. Status Light
Blue: Power On
Blue flashing: Recording
17. 3.0” Screen
1
2
9 10
3
4
11 12 13
14
5
15
16 17
6
7
8
4
Safety Instructions
1. Safety Instructions
WARNING:
Do not install the device within the driver’s or
passenger airbag operation range. Please refer to your
car’s service manual for details about the operation
range of your car’s airbags.
Never modify modes, settings, or program your
device while your car is in motion.
Ensure the device and its power cord are installed as
per the instructions on page 6, and do not obstruct
the driver’s line of sight or impede the operation of
any driving controls.
Before using the dash cam, the user shall check
the applicable laws on the use of dash cams.
In some jurisdictions, the use of dash cams can be
considered as an invasion of privacy.
Furthermore, the mounting of the dash cam on
the windshield might be regulated by law in some
jurisdictions.
It is the user’s responsibility to check the
applicable laws before using the dash cam. We do
not take any responsibility for wrong or unlawful
use of the dash cam.
5
Getting Started
EN
2. Getting Started
2.1 Installing your Device
The above illustration refers to a left-hand drive car.
For right-hand drive cars, please flip the position of
the cable installation accordingly.
• Install your device within the rear-view mirror
area and within the wiper cleaning area to get the
clearest possible view.
• Your device comes with a 3.6m USB power cable.
Organise the power cord so that it does not
interfere with the driver’s vision. Use cable clips to
secure the power cord if necessary.
Najlepsze miejsce montażu
6
Getting Started
• Place the device on the windshield mount
rst. Press the suction cup of the mount to the
windshield and press the lever to lock. Ensure the
mount is safely attached to the windshield.
• When using the dashboard camera device in
your car, we recommend that you always use the
cigarette charger in order to maintain the battery
level. The unit is not designed to run on battery
power alone, the battery is there for backup
purposes only.
2.2 First Use
• Insert a SD card (not provided) in the SD card slot.
Your dashboard camera accepts SD cards of up to
32GB capacity (class 10). It is recommended that
you format the SD card. Please refer to the settings
described in this manual.
• Your dashboard camera will always power up
and begin recording automatically as soon as it is
connected to a power source.
Simply connect your dashboard camera to a power
source that comes on when you start the engine of
your vehicle, and the dashboard camera will start
recording automatically without you having to
remember to press on a button.
7
Using your Dashboard Camera
EN
• You can also power it ON or OFF manually by
pressing the On/O button.
• The power LED (Red) will turn ON when the power
is plugged in. Whenever the device is turned ON
or OFF, you will see a splash screen showing the
Motorola logo.
3. Using your Dashboard Camera
3.1 Recording and Saving
The purpose of your dashboard camera is to
continuously record the road ahead, and to
automatically record and save any incidents or
accidents you might be involved in.
Your device records video by clusters of 1 minute (the
duration can be changed in video settings menu, see
“4.2 Video Settings”.). It is equipped with a sensor
that detects shocks. Each time a shock is detected, it
will permanently save the cluster during which the event
occurred. The sensitivity of the sensor can be changed
in the video settings menu, see “4.2 Video Settings”.
Once your SD card is full, it will automatically
overwrite the oldest footage. SD card storage space
has been set to: 70% for Normal, 20% for Event, 10%
for Photo.
8
Using your Dashboard Camera
3.2 Switching Modes
You can switch between the Video and Playback
mode by pressing the Mode button. Video mode is
the default mode. To view or delete saved footages,
switch to Playback mode.
IMPORTANT!
The driver must never switch modes while the car is
in motion.
3.2.1 Mass Storage Mode
You can also connect the device to your computer
using the standard micro USB cable to view and
manage videos stored inside the SD card.
3.2.2 Video Mode
The table below explains the various information
displayed on the screen when your MDC300 is in
Video mode. Some icons will only be displayed
once the relevant function is selected within the
Video menu, as described below.
9
Using your Dashboard Camera
EN
1
9 10 11 12
2 3 4 5 6 7 8
6
7
1. Parking
Mode
Appears on screen when Parking
Mode has been turned on.
2. Microphone Appears on screen when Audio
Recording is active
is displayed
when Mute.
3. Recording Appears on screen when recording is
in progress.
is displayed when in
standby.
4. Resolution Displays the current resolution
5. Frame Displays the number of frames per
second.
6. Mode Indicates that the dashboard camera
is in Video mode.
10
Using your Dashboard Camera
7. Memory
Card
Indicates whether a memory card is
present.
is displayed when the
memory card has been removed.
8. Battery Indicates the battery status.
9. Date Current date
10. Time Current time
11. Recording
Time
Displays recording time of current
video.
12. Protected Shown on screen when a video file has
been protected by activation of the
G Sensor or by the pressing of the file
protect button.
3.2.3 Playback Mode
Press the Mode button to select
Playback mode.
11
Using your Dashboard Camera
EN
For each Video Type, press
Up
or
Down
to
navigate,
OK
to confirm,
Menu/Back
to go to
Playback Setting
, and
Mode
to go back.
Once you have selected a type of video, the
following screen will be displayed.
1
5 6 7
2 3 4
8
The MDC300 will display the last recorded file.
Depending on the type of file, the on-screen
information and playback functions differ.
12
Using your Dashboard Camera
Video Files:
1. Mode Indicates that the dashboard
camera is in Video Playback mode.
2. Video Number Displays the current video number.
3. Memory Card Indicates whether a memory card is
present.
is displayed when the memory
card has been removed.
4. Battery Indicates the battery status.
5. Date Current video date.
6. Time Current video time.
7. Video Length Current video length.
8. Page Current page/total page.
Photo Files:
1 2 3 4
5 6
7
13
Using your Dashboard Camera
EN
1. Mode Indicates that the dashboard camera
is in Photo Playback mode.
2. Photo
Number
Displays current photo number.
3. Memory
Card
Indicates whether a memory card
is present.
is displayed when the
memory card has been removed.
4. Battery Indicates the battery status.
5. Date Current photo date.
6. Time Current photo time.
7. Page Current page/total page.
3.3 Parking Mode
Your dashboard camera can record footages of
events occurring when your car is parked with its
engine off. The built-in battery will keep the sensor
of your device in stand-by mode, and will start
recording automatically for 30 seconds if it detects
vibration or a shock. Parking mode can only record
and save footage after an event has been detected
by the sensor.
14
Settings
IMPORTANT!
Due to technical reasons, Parking mode is disabled
by default. You can enable it in settings menu, see
section “4.2 Video Settings”.
3.4 Lock/Unlock the Video
In case of emergency, you can lock/unlock the
current video by pressing on the LOCK button when
recording. The video footage of the locked video will
be saved in the Event folder until the folder is full.
4. Settings
4.1 Main Settings
To access Main Settings, press the Menu/Back
button while in Video mode.
For each sub-menu, press Up or Down to navigate,
OK to confirm, and Menu/Back to go back or cancel.
15
Settings
EN
Date/Time Set the date and time.
Press Up or Down to set each value;
press OK to switch to the next value. It
would be adjust to satellite time once
positioned.
Beep Sound Enable or disable beep sounds.
Date Format Set the date format.
Language English/France/Espanol/ Portugues/
Deutsch/Italiano/
简体
中文
/
繁体
中文
/Russian/Japanese
Frequency Select exposure, used to adjust
exposure level for different light
conditions.
LCD Off You can set the LCD to never turn off
or turn off after 3 minutes
Volume Set the volume of the built-in speaker
to high/middle/low.
Exposure Used to adjust exposure level for
different light conditions. You can
adjust the exposure as you require.
Press the Up button if you need the
photos to be clearer or Down button if
you need it to be darker.
16
Settings
White Balance Adjust the white balance for different
light conditions. You can set the white
balance to Auto/Incandescent/Sunny/
Cloudy/ Fluorescent.
We recommend to leave it as Auto.
Format Use this option to format your SD
Card.
IMPORTANT!
Formatting a SD card will erase all
its memory contents.
Default Setting Reset all your device settings to
factory default.
Stamp Setting Enable or disable a date stamp
showing on your videos and photos.
Version Current firmware version.
17
Settings
EN
4.2 Video Settings
There are two ways to access Video Settings:
1. Press the Menu/Back button twice while in Video
mode;
2. Press the Down button while in the last sub-menu
of Main Settings.
For each sub-menu, press Up or Down to navigate,
OK to confirm, and Menu/Back to go back or
cancel.
18
Settings
Video resolution You can set the video resolution to:
FHD 1920*1080 or 720P 1280*720
IMPORTANT!
If you want to store more photos
or videos on your SD card, try
reducing the resolution.
Loop Recording Loop Recording allows your camera
to overwrite old files with new files.
Once the memory card becomes
full, the camera will delete the first
video file to make room for the latest
file. Choose the default duration for
each recording cluster: Off /1 min /
3 min / 5 min.
G-Sensor G Sensor detects forces which will
automatically protect the current
recording in the event of a collision.
You can change the sensitivity of the
sensor. It is set to Low by default, but
can be set to Off/High/Medium/Low.
If you turn the sensor off, your
dashboard camera will not be able to
permanently save any footage.
Park mode Enable or disable parking mode.
Record audio Enable or disable microphone.
19
Settings
EN
IMPORTANT!
Changing the video quality and resolution settings
to a lower value might reduce the amount of details
you can see on your saved videos.
Resolution Card Capacity Recording time
(minutes)
1080FHD
1920*1080
4GB 30
8GB 60
16GB 120
32GB 240
720P
1280*720
4GB 40
8GB 80
16GB 160
32GB 320
IMPORTANT!
The above information is for your reference only.
Different memory cards have slightly different total
capacity and the maximum recording time is different.
20
Settings
4.3 Playback Settings
To access Playback Settings, press the Menu/Back
button while in Playback mode. For each sub-menu,
press Up or Down to navigate, OK to confirm, and
Menu/Back to go back or cancel.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86

Motorola MDC300 Instrukcja obsługi

Kategoria
Rejestratory jazdy
Typ
Instrukcja obsługi